I just enabled power management/fencing successfully on two of my hosts (Dell poweredge R720s with Idrac 7) but am failing to add the third. I enter the IP and user/pass like the others, it takes 15 seconds or so they spits out "Test Failed: Internal JSON-RPC error" I tried resetting the IDRAC on that server. I can also ping it and access it fine in a web browser. I can ping it from the host as well. Is there any configuration in IDRAC that could be blocking the fence attempt or any logs in oVirt I can look at to figure out what might be happening with the connection? I see there is a "fence_idrac" command on the hosts but unsure what switches to use with it to test. Thanks!
Le 01/08/2018 à 15:28, Jayme a écrit :
I just enabled power management/fencing successfully on two of my hosts (Dell poweredge R720s with Idrac 7) but am failing to add the third. I enter the IP and user/pass like the others, it takes 15 seconds or so they spits out "Test Failed: Internal JSON-RPC error"
I tried resetting the IDRAC on that server. I can also ping it and access it fine in a web browser. I can ping it from the host as well.
Is there any configuration in IDRAC that could be blocking the fence attempt or any logs in oVirt I can look at to figure out what might be happening with the connection?
I see there is a "fence_idrac" command on the hosts but unsure what switches to use with it to test.
Thanks!
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UJQDE3W6NSZWLM...
Hello Jayme, All our iDrac are successfully power-managed this way : type : ipmilan options : lanplus=1 In the Drac, we use a dedicated user with the appropriate rights. HTH -- Nicolas ECARNOT
I got it working, it turns out that IPMI over lan was not enabled in the iDrac network settings. Thanks! On Wed, Aug 1, 2018 at 10:52 AM, Nicolas Ecarnot <nicolas@ecarnot.net> wrote:
Le 01/08/2018 à 15:28, Jayme a écrit :
I just enabled power management/fencing successfully on two of my hosts (Dell poweredge R720s with Idrac 7) but am failing to add the third. I enter the IP and user/pass like the others, it takes 15 seconds or so they spits out "Test Failed: Internal JSON-RPC error"
I tried resetting the IDRAC on that server. I can also ping it and access it fine in a web browser. I can ping it from the host as well.
Is there any configuration in IDRAC that could be blocking the fence attempt or any logs in oVirt I can look at to figure out what might be happening with the connection?
I see there is a "fence_idrac" command on the hosts but unsure what switches to use with it to test.
Thanks!
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/communit y/about/community-guidelines/ List Archives: https://lists.ovirt.org/archiv es/list/users@ovirt.org/message/UJQDE3W6NSZWLMSZJQZD7OZM4CYEMNKI/
Hello Jayme,
All our iDrac are successfully power-managed this way :
type : ipmilan options : lanplus=1
In the Drac, we use a dedicated user with the appropriate rights.
HTH
-- Nicolas ECARNOT _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/communit y/about/community-guidelines/ List Archives: https://lists.ovirt.org/archiv es/list/users@ovirt.org/message/FTT6IBBAONVMLWWHDW3W76KWT433AYQ2/
participants (2)
-
Jayme -
Nicolas Ecarnot