[ovirt-devel] [vdsm] Error while building ovirt-live from 3.5 snapshot repo

Sandro Bonazzola sbonazzo at redhat.com
Mon Sep 1 14:55:24 UTC 2014


Can you check vdsm on 3.5 branch?
>From the live build execution:

....

Retrieving http://resources.ovirt.org/pub/ovirt-3.5-snapshot/rpm/el6/x86_64/vdsm-4.16.2-16.git5629cdd.el6.x86_64.rpm ...OK
Retrieving http://resources.ovirt.org/pub/ovirt-3.5-snapshot/rpm/el6/noarch/vdsm-cli-4.16.2-16.git5629cdd.el6.noarch.rpm ...OK
Retrieving http://resources.ovirt.org/pub/ovirt-3.5-snapshot/rpm/el6/noarch/vdsm-jsonrpc-4.16.2-16.git5629cdd.el6.noarch.rpm ...OK
Retrieving http://resources.ovirt.org/pub/ovirt-3.5-snapshot/rpm/el6/x86_64/vdsm-python-4.16.2-16.git5629cdd.el6.x86_64.rpm ...OK
Retrieving http://resources.ovirt.org/pub/ovirt-3.5-snapshot/rpm/el6/noarch/vdsm-python-zombiereaper-4.16.2-16.git5629cdd.el6.noarch.rpm ...OK
Retrieving http://resources.ovirt.org/pub/ovirt-3.5-snapshot/rpm/el6/noarch/vdsm-xmlrpc-4.16.2-16.git5629cdd.el6.noarch.rpm ...OK
Retrieving http://resources.ovirt.org/pub/ovirt-3.5-snapshot/rpm/el6/noarch/vdsm-yajsonrpc-4.16.2-16.git5629cdd.el6.noarch.rpm ...OK

....

  Installing: vdsm                         ##################### [840/989]Usage: /usr/bin/vdsm-tool [options] <action> [arguments]
Valid options:
  -h, --help
		Show this help menu.
  -l, --logfile <path>
		Redirect logging to file.
  -v, --verbose
		Include warning (and errors) messages in log.
  -vv, --vverbose
		Include information (and above) messages in log.
  -vvv, --vvverbose
		Include debug (and above) messages in log.
  -a, --append
		Append to logfile instead of truncating it
(if logging to a file).

 Commands in module dummybr:

 dummybr
usage:
 /usr/bin/vdsm-tool [options] dummybr
    Defines dummy bridge on libvirt network.


 Commands in module load_needed_modules:

 load-needed-modules
usage:
 /usr/bin/vdsm-tool [options] load-needed-modules
    Load needed modules


 Commands in module nwfilter:

 nwfilter
usage:
 /usr/bin/vdsm-tool [options] nwfilter
    Defines network filters on libvirt


 Commands in module passwd:

 remove-saslpasswd
usage:
 /usr/bin/vdsm-tool [options] Remove vdsm password for libvirt connection


 set-saslpasswd
usage:
 /usr/bin/vdsm-tool [options] set-saslpasswd
    Set vdsm password for libvirt connection


 Commands in module restore_nets:

 restore-nets
usage:
 /usr/bin/vdsm-tool [options] restore-nets
    Restores the networks to what was previously persisted via vdsm.


 Commands in module seboolsetup:

 sebool-config
usage:
 /usr/bin/vdsm-tool [options] sebool-config
    Enable the required selinux booleans


 sebool-unconfig
usage:
 /usr/bin/vdsm-tool [options] sebool-unconfig
    Disable the required selinux booleans


 Commands in module service:

 service-disable
usage:
 /usr/bin/vdsm-tool [options] service-disable service-name
    Disable a system service.

    Parameters:
    service-name - service to disable


 service-is-managed
usage:
 /usr/bin/vdsm-tool [options] service-is-managed service-name
    Check the existence of a service.

    Parameters:
    service-name - service to query


 service-reload
usage:
 /usr/bin/vdsm-tool [options] service-reload service-name
    Notify a system service to reload configurations.

    Parameters:
    service-name - service to notify


 service-restart
usage:
 /usr/bin/vdsm-tool [options] service-restart service-name
    Restart a system service.

    Parameters:
    service-name - service to restart


 service-start
usage:
 /usr/bin/vdsm-tool [options] service-start service-name
    Start a system service.

    Parameters:
    service-start - service to start


 service-status
usage:
 /usr/bin/vdsm-tool [options] service-status service-name
    Get status of a system service.

    Parameters:
    service-name - service to query


 service-stop
usage:
 /usr/bin/vdsm-tool [options] service-stop service-name
    Stop a system service.

    Parameters:
    service-name - service to stop


 Commands in module transient:

 cleanup-transient-repository
usage:
 /usr/bin/vdsm-tool [options] cleanup-transient-repository
    Cleanup the unused transient disks present in the repository.
    (NOTE: it is recommended to NOT execute this command when the vdsm
    daemon is running)


 setup-transient-repository
usage:
 /usr/bin/vdsm-tool [options] setup-transient-repository
    Prepare the transient disks repository


 Commands in module unified_persistence:

 upgrade-unified-persistence
usage:
 /usr/bin/vdsm-tool [options] upgrade-unified-persistence [upgrade-options]
    Upgrade host networking persistence from ifcfg to unified if the
    persistence model is set as unified in /usr/lib64/python2.X/site-packages/
    vdsm/config.py


 Commands in module upgrade:

 Commands in module upgrade_300_networks:

 upgrade-3.0.0-networks
usage:
 /usr/bin/vdsm-tool [options] upgrade-3.0.0-networks [upgrade-options]
    Since ovirt-3.0, Vdsm uses libvirt networks (with names vdsm-*) to store
    its own networks. Older Vdsms did not have those defined, and used only
    linux bridges. This command is kept as an upgrade tool for the (very few)
    people who still have such old setups running.


 Commands in module validate_ovirt_certs:

 validate-ovirt-certs
usage:
 /usr/bin/vdsm-tool [options] validate-ovirt-certs
    Validate vdsmcert.pem against cacert.pem.
    If current cacert.pem is invalidate, it will find a validate certificate
    file and replace the old cacert.pem with it. And then persist it.


 Commands in module vdsm-id:

 vdsm-id
usage:
 /usr/bin/vdsm-tool [options] vdsm-id
    Printing host uuid



  Installing: ovirt-host-deploy-offline    ##################### [841/989]


-- 
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com



More information about the Devel mailing list