[ovirt-devel] Cant get yum update "ovirt-*-setup*" packages to upgrade from 4.0 to 4.1

Lynn Dixon ldixon at redhat.com
Fri Feb 17 16:56:19 UTC 2017


Martin,
I have verified that the ovirt-4.1 repos is configured exactly in my repo
file as you mentioned.

I also made the changes for skip_if_unavailable=0 and got this error when I
tried to do yum check-update (see below)

I have also attached my 4.1 repo files in this email just to be sure

------------------------------------------------------------
[root at tywin yum.repos.d]# yum check-update
Loaded plugins: langpacks, product-id, search-disabled-repos,
subscription-manager, versionlock
Repository virtio-win-stable is listed more than once in the configuration
centos-opstools-testing

     | 2.9 kB  00:00:00
centos-ovirt-common-candidate

     | 3.4 kB  00:00:00
centos-ovirt41-candidate

      | 3.4 kB  00:00:00


 One of the configured repositories failed (Unknown),
 and yum doesn't have enough cached data to continue. At this point the only
 safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the
problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a
working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Run the command with the repository temporarily disabled
            yum --disablerepo=<repoid> ...

     4. Disable the repository permanently, so yum won't use it by default.
Yum
        will then just ignore the repository until you permanently enable it
        again or use --enablerepo for temporary usage:

            yum-config-manager --disable <repoid>
        or
            subscription-manager repos --disable=<repoid>

     5. Configure the failing repository to be skipped, if it is
unavailable.
        Note that yum will try to contact the repo. when it runs most
commands,
        so will have to try and fail each time (and thus. yum will be be
much
        slower). If it is a very temporary problem though, this is often a
nice
        compromise:

            yum-config-manager --save
--setopt=<repoid>.skip_if_unavailable=true

Cannot find a valid baseurl for repo: ovirt-4.1/7Server
------------------------------------------------------------------------------------



*Lynn Dixon* | Red Hat Certified Architect #100-006-188
*Sr. Cloud Consultant* | Cloud Management Practice
Google Voice: 423-618-1414
Cell/Text: 423-774-3188
Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi>



On Fri, Feb 17, 2017 at 11:33 AM, Martin Perina <mperina at redhat.com> wrote:

> Hmm, strange. I've attached 4.1 repo files to the email, which should be
> installed by ovirt-release41. The most important repository which is
> somehow missing in your configuration is this one:
>
> [ovirt-4.1]
> name=Latest oVirt 4.1 Release
> #baseurl=http://resources.ovirt.org/pub/ovirt-4.1/rpm/el$releasever/
> mirrorlist=http://resources.ovirt.org/pub/yum-repo/
> mirrorlist-ovirt-4.1-el$releasever
> enabled=1
> skip_if_unavailable=1
> gpgcheck=1
> gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-ovirt-4.1
>
>
> Could you please edit your /etc/yum.repos.d/ovirt-4.1*.repo files and
> change set skip_if_unavailable=0. Afterwards please execute yum
> check-update and we should see some error, why those repositories are not
> available on your machine.
>
> Thanks
>
> Martin
>
>
> On Fri, Feb 17, 2017 at 5:21 PM, Lynn Dixon <ldixon at redhat.com> wrote:
>
>> Hmmm.
>>
>> Here is my repo-id info:
>>
>> --------------------------------------
>> [root at tywin ~]# yum repoinfo enabled | grep Repo-id
>> Repository virtio-win-stable is listed more than once in the configuration
>> Repo-id      : centos-opstools-testing/x86_64
>> Repo-id      : centos-ovirt-common-candidate/x86_64
>> Repo-id      : centos-ovirt41-candidate/x86_64
>> Repo-id      : ovirt-4.0/7Server
>> Repo-id      : ovirt-4.1-centos-gluster38/x86_64
>> Repo-id      : ovirt-4.1-epel/x86_64
>> Repo-id      : ovirt-4.1-patternfly1-noarch-epel/x86_64
>> Repo-id      : qci-1.0-for-rhel-7-rpms/x86_64
>> Repo-id      : rhel-7-fast-datapath-rpms/7Server/x86_64
>> Repo-id      : rhel-7-server-extras-rpms/x86_64
>> Repo-id      : rhel-7-server-optional-rpms/7Server/x86_64
>> Repo-id      : rhel-7-server-rhev-mgmt-agent-rpms/7Server/x86_64
>> Repo-id      : rhel-7-server-rpms/7Server/x86_64
>> Repo-id      : rhel-7-server-tus-rpms/7Server/x86_64
>> ---------------------------------------------------------------------
>>
>> I am using RHEL7 and not CentOS...sorry, but that shouldn't matter.
>>
>>
>>
>> I went ahead and followed your suggestions, removing, cleaning and
>> reinstalling.
>>
>> And here is the output from a yum check-update:
>>
>> ____________________________________________________________
>> ________________
>> [root at tywin ~]# yum check-update
>> Loaded plugins: langpacks, product-id, search-disabled-repos,
>> subscription-manager, versionlock
>> Repository virtio-win-stable is listed more than once in the configuration
>> centos-opstools-testing
>>
>>        | 2.9 kB  00:00:00
>> centos-ovirt-common-candidate
>>
>>        | 3.4 kB  00:00:00
>> centos-ovirt41-candidate
>>
>>         | 3.4 kB  00:00:00
>> ovirt-4.1-centos-gluster38
>>
>>         | 2.9 kB  00:00:00
>> ovirt-4.1-epel/x86_64/metalink
>>
>>         |  14 kB  00:00:00
>> ovirt-4.1-epel
>>
>>         | 4.3 kB  00:00:00
>> ovirt-4.1-patternfly1-noarch-epel
>>
>>          | 3.0 kB  00:00:00
>> (1/8): centos-ovirt41-candidate/x86_64/primary_db
>>
>>          |  38 kB  00:00:00
>> (2/8): ovirt-4.1-epel/x86_64/group_gz
>>
>>        | 170 kB  00:00:00
>> (3/8): ovirt-4.1-centos-gluster38/x86_64/primary_db
>>
>>          |  80 kB  00:00:00
>> (4/8): centos-ovirt-common-candidate/x86_64/primary_db
>>
>>         |  81 kB  00:00:00
>> (5/8): ovirt-4.1-epel/x86_64/updateinfo
>>
>>          | 735 kB  00:00:00
>> (6/8): ovirt-4.1-epel/x86_64/primary_db
>>
>>          | 4.5 MB  00:00:00
>> (7/8): ovirt-4.1-patternfly1-noarch-epel/x86_64/primary_db
>>
>>         | 2.2 kB  00:00:00
>> (8/8): centos-opstools-testing/x86_64/primary_db
>>
>>         | 124 kB  00:00:00
>>
>> antlr-tool.noarch
>>            2.7.7-35.el7
>>  centos-ovirt-common-candidate
>> glusterfs.x86_64
>>             3.8.9-1.el7
>>   ovirt-4.1-centos-gluster38
>> glusterfs-api.x86_64
>>             3.8.9-1.el7
>>   ovirt-4.1-centos-gluster38
>> glusterfs-cli.x86_64
>>             3.8.9-1.el7
>>   ovirt-4.1-centos-gluster38
>> glusterfs-client-xlators.x86_64
>>              3.8.9-1.el7
>>     ovirt-4.1-centos-gluster38
>> glusterfs-fuse.x86_64
>>            3.8.9-1.el7
>>   ovirt-4.1-centos-gluster38
>> glusterfs-libs.x86_64
>>            3.8.9-1.el7
>>   ovirt-4.1-centos-gluster38
>> openvswitch.x86_64
>>             2.6.90-1.el7
>>    centos-ovirt41-candidate
>> otopi.noarch
>>             1.6.0-1.el7
>>   centos-ovirt41-candidate
>> otopi-java.noarch
>>            1.6.0-1.el7
>>   centos-ovirt41-candidate
>> ovirt-host-deploy.noarch
>>             1.6.0-1.el7
>>   centos-ovirt41-candidate
>> ovirt-host-deploy-java.noarch
>>            1.6.0-1.el7
>>   centos-ovirt41-candidate
>> ovirt-imageio-common.noarch
>>            1.0.0-1.el7
>>   centos-ovirt41-candidate
>> ovirt-imageio-daemon.noarch
>>            1.0.0-1.el7
>>   centos-ovirt41-candidate
>> ovirt-setup-lib.noarch
>>             1.1.0-1.el7
>>   centos-ovirt41-candidate
>> python-ovirt-engine-sdk4.x86_64
>>              4.1.0-1.el7
>>     centos-ovirt41-candidate
>> vdsm.x86_64
>>            4.19.4-1.el7
>>  centos-ovirt41-candidate
>> vdsm-api.noarch
>>            4.19.4-1.el7
>>  centos-ovirt41-candidate
>> vdsm-cli.noarch
>>            4.19.4-1.el7
>>  centos-ovirt41-candidate
>> vdsm-hook-macspoof.noarch
>>            4.19.4-1.el7
>>  centos-ovirt41-candidate
>> vdsm-hook-nestedvt.noarch
>>            4.19.4-1.el7
>>  centos-ovirt41-candidate
>> vdsm-hook-vmfex-dev.noarch
>>             4.19.4-1.el7
>>    centos-ovirt41-candidate
>> vdsm-jsonrpc.noarch
>>            4.19.4-1.el7
>>  centos-ovirt41-candidate
>> vdsm-jsonrpc-java.noarch
>>             1.3.8-1.el7
>>   centos-ovirt41-candidate
>> vdsm-python.noarch
>>             4.19.4-1.el7
>>    centos-ovirt41-candidate
>> vdsm-xmlrpc.noarch
>>             4.19.4-1.el7
>>    centos-ovirt41-candidate
>> vdsm-yajsonrpc.noarch
>>            4.19.4-1.el7
>>  centos-ovirt41-candidate
>>
>> ____________________________________________________________
>> _______________________________________________________________
>>
>> It's showing that there are indeed some updated packages, and coming from
>> the 4.1 repos, but none of the ones listed are for the engine-setup.
>>
>>
>>
>>
>>
>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188
>> *Sr. Cloud Consultant* | Cloud Management Practice
>> Google Voice: 423-618-1414 <(423)%20618-1414>
>> Cell/Text: 423-774-3188 <(423)%20774-3188>
>> Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi>
>>
>>
>>
>> On Fri, Feb 17, 2017 at 10:55 AM, Martin Perina <mperina at redhat.com>
>> wrote:
>>
>>>
>>>
>>> On Fri, Feb 17, 2017 at 3:33 PM, Lynn Dixon <ldixon at redhat.com> wrote:
>>>
>>>> Sure! here is the output:
>>>>
>>>> ----------------------------------------------------
>>>> [root at tywin ~]# yum info --show-duplicates ovirt-engine-setup
>>>> Loaded plugins: langpacks, product-id, search-disabled-repos,
>>>> subscription-manager, versionlock
>>>> Repository virtio-win-stable is listed more than once in the
>>>> configuration
>>>> centos-opstools-testing
>>>>                                             | 2.9 kB  00:00:00
>>>> centos-ovirt-common-candidate
>>>>                                             | 3.4 kB  00:00:00
>>>> centos-ovirt41-candidate
>>>>                                              | 3.4 kB  00:00:00
>>>> ovirt-4.0
>>>>                                             | 2.9 kB  00:00:00
>>>>
>>>
>>> ​It's suspicious that you don't see ovirt-4.1 repo here, something
>>> happened to repository configuration provided by ovirt-release-41 package.
>>> If you execute:
>>>
>>>   yum repoinfo enabled | grep Repo-id
>>>
>>> you should see following repositories:
>>>
>>>   Repo-id      : base/7/x86_64
>>>   Repo-id      : centos-opstools-testing/x86_64
>>>   Repo-id      : centos-ovirt-common-candidate/x86_64
>>>   Repo-id      : centos-ovirt40-release/x86_64
>>>   Repo-id      : centos-ovirt41-candidate/x86_64
>>>   Repo-id      : centos-sclo-rh/x86_64
>>>   Repo-id      : centos-sclo-sclo/x86_64
>>>   Repo-id      : extras/7/x86_64
>>>   Repo-id      : ovirt-4.0/7
>>>   Repo-id      : ovirt-4.0-centos-gluster37/x86_64
>>>   Repo-id      : ovirt-4.0-epel/x86_64
>>>   Repo-id      : ovirt-4.0-patternfly1-noarch-epel/x86_64
>>>   Repo-id      : ovirt-4.1/7
>>>   Repo-id      : ovirt-4.1-centos-gluster38/x86_64
>>>   Repo-id      : ovirt-4.1-epel/x86_64
>>>   Repo-id      : ovirt-4.1-patternfly1-noarch-epel/x86_64
>>>   Repo-id      : updates/7/x86_64
>>>   Repo-id      : virtio-win-stable
>>>
>>> If not, please try following steps:
>>>
>>>   yum remove ovirt-release41
>>>   yum clean all
>>>   rm /etc/yum.repos.d/ovirt-4.1*.repo
>>>   yum install http://resources.ovirt.org/pub
>>> /yum-repo/ovirt-release41.rpm
>>>   yum check-update
>>>
>>> After those steps your repositories should be fine and you should see
>>> oVirt 4.1 packages.
>>>
>>>
>>>> ovirt-4.1-centos-gluster38
>>>>                                              | 2.9 kB  00:00:00
>>>> ovirt-4.1-epel/x86_64/metalink
>>>>                                              |  14 kB  00:00:00
>>>> ovirt-4.1-patternfly1-noarch-epel
>>>>                                               | 3.0 kB  00:00:00
>>>> ovirt-4.1-centos-gluster38/x86_64/primary_db
>>>>                                              |  80 kB  00:00:00
>>>> Installed Packages
>>>> Name        : ovirt-engine-setup
>>>> Arch        : noarch
>>>> Version     : 4.0.6.3
>>>> Release     : 1.el7.centos
>>>> Size        : 11 k
>>>> Repo        : installed
>>>> From repo   : ovirt-4.0
>>>> Summary     : Setup and upgrade scripts for oVirt Engine
>>>> URL         : http://www.ovirt.org
>>>> License     : ASL 2.0
>>>> Description : Setup and upgrade scripts for oVirt Engine
>>>>
>>>> Available Packages
>>>> Name        : ovirt-engine-setup
>>>> Arch        : noarch
>>>> Version     : 4.0.0.6
>>>> Release     : 1.el7.centos
>>>> Size        : 8.6 k
>>>> Repo        : ovirt-4.0/7Server
>>>> Summary     : Setup and upgrade scripts for oVirt Engine
>>>> URL         : http://www.ovirt.org
>>>> License     : ASL 2.0
>>>> Description : Setup and upgrade scripts for oVirt Engine
>>>>
>>>> Name        : ovirt-engine-setup
>>>> Arch        : noarch
>>>> Version     : 4.0.1.1
>>>> Release     : 1.el7.centos
>>>> Size        : 8.7 k
>>>> Repo        : ovirt-4.0/7Server
>>>> Summary     : Setup and upgrade scripts for oVirt Engine
>>>> URL         : http://www.ovirt.org
>>>> License     : ASL 2.0
>>>> Description : Setup and upgrade scripts for oVirt Engine
>>>>
>>>> Name        : ovirt-engine-setup
>>>> Arch        : noarch
>>>> Version     : 4.0.2.6
>>>> Release     : 1.el7.centos
>>>> Size        : 9.1 k
>>>> Repo        : ovirt-4.0/7Server
>>>> Summary     : Setup and upgrade scripts for oVirt Engine
>>>> URL         : http://www.ovirt.org
>>>> License     : ASL 2.0
>>>> Description : Setup and upgrade scripts for oVirt Engine
>>>>
>>>> Name        : ovirt-engine-setup
>>>> Arch        : noarch
>>>> Version     : 4.0.2.7
>>>> Release     : 1.el7.centos
>>>> Size        : 9.2 k
>>>> Repo        : ovirt-4.0/7Server
>>>> Summary     : Setup and upgrade scripts for oVirt Engine
>>>> URL         : http://www.ovirt.org
>>>> License     : ASL 2.0
>>>> Description : Setup and upgrade scripts for oVirt Engine
>>>>
>>>> Name        : ovirt-engine-setup
>>>> Arch        : noarch
>>>> Version     : 4.0.3
>>>> Release     : 1.el7.centos
>>>> Size        : 9.4 k
>>>> Repo        : ovirt-4.0/7Server
>>>> Summary     : Setup and upgrade scripts for oVirt Engine
>>>> URL         : http://www.ovirt.org
>>>> License     : ASL 2.0
>>>> Description : Setup and upgrade scripts for oVirt Engine
>>>>
>>>> Name        : ovirt-engine-setup
>>>> Arch        : noarch
>>>> Version     : 4.0.4.4
>>>> Release     : 1.el7.centos
>>>> Size        : 9.8 k
>>>> Repo        : ovirt-4.0/7Server
>>>> Summary     : Setup and upgrade scripts for oVirt Engine
>>>> URL         : http://www.ovirt.org
>>>> License     : ASL 2.0
>>>> Description : Setup and upgrade scripts for oVirt Engine
>>>>
>>>> Name        : ovirt-engine-setup
>>>> Arch        : noarch
>>>> Version     : 4.0.5.5
>>>> Release     : 1.el7.centos
>>>> Size        : 10 k
>>>> Repo        : ovirt-4.0/7Server
>>>> Summary     : Setup and upgrade scripts for oVirt Engine
>>>> URL         : http://www.ovirt.org
>>>> License     : ASL 2.0
>>>> Description : Setup and upgrade scripts for oVirt Engine
>>>>
>>>> Name        : ovirt-engine-setup
>>>> Arch        : noarch
>>>> Version     : 4.0.6.3
>>>> Release     : 1.el7.centos
>>>> Size        : 10 k
>>>> Repo        : ovirt-4.0/7Server
>>>> Summary     : Setup and upgrade scripts for oVirt Engine
>>>> URL         : http://www.ovirt.org
>>>> License     : ASL 2.0
>>>> Description : Setup and upgrade scripts for oVirt Engine
>>>>
>>>> ------------------------------------------------------------
>>>> ------------------------------------------------
>>>>
>>>>
>>>>
>>>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188
>>>> *Sr. Cloud Consultant* | Cloud Management Practice
>>>> Google Voice: 423-618-1414 <%28423%29%20618-1414>
>>>> Cell/Text: 423-774-3188 <%28423%29%20774-3188>
>>>> Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi>
>>>>
>>>>
>>>>
>>>> On Fri, Feb 17, 2017 at 3:27 AM, Martin Perina <mperina at redhat.com>
>>>> wrote:
>>>>
>>>>> So could you please share following output?
>>>>>
>>>>> yum info --show-duplicates ovirt-engine-setup
>>>>>
>>>>>
>>>>> On Fri, Feb 17, 2017 at 9:07 AM, Lynn Dixon <ldixon at redhat.com> wrote:
>>>>>
>>>>>> Yes Martin, that was the first step I did.  I have also double
>>>>>> checked that the 4.1 repo is enabled.
>>>>>>
>>>>>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188
>>>>>> *Sr. Cloud Consultant* | Cloud Management Practice
>>>>>> Google Voice: 423-618-1414 <%28423%29%20618-1414>
>>>>>> Cell/Text: 423-774-3188 <%28423%29%20774-3188>
>>>>>> Click here to view my Certification Portfolio <http://red.ht/1XMX2Mi>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Fri, Feb 17, 2017 at 3:07 AM, Martin Perina <mperina at redhat.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> have you installed oVirt 4.1 repositories before trying to update
>>>>>>> setup packages?
>>>>>>>
>>>>>>>   yum install http://resources.ovirt.org/pub
>>>>>>> /yum-repo/ovirt-release41.rpm
>>>>>>>
>>>>>>> Regards
>>>>>>>
>>>>>>> Martin
>>>>>>>
>>>>>>> On Fri, Feb 17, 2017 at 8:55 AM, Lynn Dixon <ldixon at redhat.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> I am following the three simple steps in the release notes here:
>>>>>>>> https://www.ovirt.org/release/4.1.0/
>>>>>>>>
>>>>>>>> I have added the repo fine, and did a yum clean all just to be
>>>>>>>> cautions.
>>>>>>>>
>>>>>>>> However, when I try to run the yum update "ovirt-*-setup*"  command
>>>>>>>> it just returns no updates found.  Likewise, if I even try to do a yum
>>>>>>>> update ovirt-engine-setup it returns no updates found.
>>>>>>>>
>>>>>>>> I am currently running oVirt  4.0.6.3-1.el7.centos on a CentOS
>>>>>>>> machine.  I feel like I am missing something really simple here, but I can
>>>>>>>> not get it to update any packages beyond the 4.0 repos.  I have even tried
>>>>>>>> disabling the 4.0 repos, but no luck.
>>>>>>>>
>>>>>>>> Any suggestions?
>>>>>>>>
>>>>>>>>
>>>>>>>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188
>>>>>>>> *Sr. Cloud Consultant* | Cloud Management Practice
>>>>>>>> Google Voice: 423-618-1414 <%28423%29%20618-1414>
>>>>>>>> Cell/Text: 423-774-3188 <%28423%29%20774-3188>
>>>>>>>> Click here to view my Certification Portfolio
>>>>>>>> <http://red.ht/1XMX2Mi>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Devel mailing list
>>>>>>>> Devel at ovirt.org
>>>>>>>> http://lists.ovirt.org/mailman/listinfo/devel
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/devel/attachments/20170217/92236987/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ovirt-4.1-dependencies.repo
Type: application/octet-stream
Size: 2096 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/devel/attachments/20170217/92236987/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ovirt-4.1.repo
Type: application/octet-stream
Size: 288 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/devel/attachments/20170217/92236987/attachment-0003.obj>


More information about the Devel mailing list