[Engine-devel] Updating ovirt engine from 3.0 to the 3.1.0 version
Ofer Schreiber
oschreib at redhat.com
Sun Apr 29 11:33:46 UTC 2012
I need more info about this:
1. It looks like a clean install (DB created from scratch). why do you call it an upgrade?
2. Do you see any error in JBoss/engine logs? (/var/log/jboss-as and /var/log/ovirt-engine usually)
3. Any error in the httpd log?
4. What happens if you stop iptables and access your server with :8080?
Thanks,
Ofer
----- Original Message -----
> Hi,
> I built a set of ovirt engine RPM packages from near the latest
> ovirt
> engine source code. However, when I try to access the engine server
> with URL "http://ovirt-engine-112:80", the browser displayed a blank
> page without http error returned. Any clue about what is going on
> here?
> Why didn't the engine administrator home page be shown?
>
>
> And the packages were also installed successfully in my target
> system,
> checked this by "rpm -q -a|grep engine".
> I) upgraded the packages to the 3.1
>
> [root at ovirt-engine-112 ~]# rpm -q -a |grep engine
> ovirt-engine-restapi-3.1.0_0001-1.8.fc16.x86_64
> ovirt-engine-dbscripts-3.1.0_0001-1.8.fc16.x86_64
> ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64
> ovirt-engine-genericapi-3.1.0_0001-1.8.fc16.x86_64
> ovirt-engine-backend-3.1.0_0001-1.8.fc16.x86_64
> ovirt-engine-setup-3.1.0_0001-1.8.fc16.x86_64
> ovirt-engine-jbossas-1.2-2.fc16.x86_64
> ovirt-engine-jboss-deps-3.1.0_0001-1.8.fc16.x86_64
> ovirt-engine-config-3.1.0_0001-1.8.fc16.x86_64
> ovirt-engine-3.1.0_0001-1.8.fc16.x86_64
> ovirt-engine-webadmin-portal-3.1.0_0001-1.8.fc16.x86_64
> ovirt-engine-userportal-3.1.0_0001-1.8.fc16.x86_64
> ovirt-engine-tools-common-3.1.0_0001-1.8.fc16.x86_64
> ovirt-engine-image-uploader-3.1.0_0001-1.8.fc16.x86_64
> ovirt-engine-notification-service-3.1.0_0001-1.8.fc16.x86_64
> ovirt-engine-iso-uploader-3.1.0_0001-1.8.fc16.x86_64
> gtk2-engines-2.20.2-2.fc15.x86_64
>
> Step II)
> Then I used "engine-setup" to setup the engine. It seems that
> everything is ok, see the log below.
>
> -------------
> [root at ovirt-engine-112 ~]# engine-setup
> Welcome to oVirt Engine setup utility
> HTTP Port [80] :
> HTTPS Port [443] :
> Host fully qualified domain name, note that this name should be fully
> resolvable [ovirt-engine-112] :
> ERROR: domain is not a valid domain name
> User input failed validation, do you still wish to use it? (yes|no):
> yes
> Password for Administrator (admin at internal) :
> Warning: Weak Password.
> Confirm password :
> Organization Name for the Certificate: cstl
> The default storage type you will be using ['NFS'| 'FC'| 'ISCSI']
> [NFS] :
> Enter DB type for installation ['remote'| 'local'] [local] :
> Local database password :
> Warning: Weak Password.
> Confirm password :
> Should the installer configure NFS share on this server to be used as
> an
> ISO Domain? ['yes'| 'no'] [yes] :
> Mount point path: /iso-dom
> ERROR: mount point already exists in /etc/exports
> Mount point path: /iso-dom
> Display name for the ISO Domain: iso-domains
> Firewall ports need to be opened.
> You can let the installer configure iptables automatically overriding
> the current configuration. The old configuration will be backed up.
> Alternately you can configure the firewall later using an example
> iptables file found under
> /usr/share/ovirt-engine/conf/iptables.example
> Configure iptables ? ['yes'| 'no']: yes
>
> oVirt Engine will be installed using the following configuration:
> =================================================================
> http-port: 80
> https-port: 443
> host-fqdn: ovirt-engine-112
> auth-pass: ********
> org-name: cstl
> default-dc-type: NFS
> db-remote-install: local
> db-local-pass: ********
> nfs-mp: /iso-dom
> iso-domain-name: iso-domains
> config-nfs: yes
> override-iptables: yes
> Proceed with the configuration listed above? (yes|no): yes
>
> Installing:
> Configuring oVirt-engine... [ DONE ]
> Creating CA... [ DONE ]
> Editing JBoss Configuration... [ DONE ]
> Setting Database Configuration... [ DONE ]
> Setting Database Security... [ DONE ]
> Creating Database... [ DONE ]
> Updating the Default Data Center Storage Type... [ DONE ]
> Editing oVirt Engine Configuration... [ DONE ]
> Editing Postgresql Configuration... [ DONE ]
> Configuring the Default ISO Domain... [ DONE ]
> Configuring Firewall (iptables)... [ DONE ]
> Starting JBoss Service... [ DONE ]
> Handling HTTPD... [ DONE ]
>
> **** Installation completed successfully ******
>
> (Please allow oVirt Engine a few moments to start up.....)
>
>
> Additional information:
> * SSL Certificate fingerprint:
> C6:01:83:93:4B:2C:2A:38:65:C8:49:C9:17:34:FE:4B:1C:10:D5:FF
> * SSH Public key fingerprint:
> 69:8c:bd:05:43:17:0a:43:a3:cc:62:7e:f7:be:0c:42
> * A default ISO share has been created on this host.
> If IP based access restrictions are required, please edit
> /iso-dom
> entry in /etc/exports
> * The firewall has been updated, the old iptables configuration
> file
> was saved to
> /usr/share/ovirt-engine/conf/iptables.backup.011513-04282012_2225
> * The installation log file is available at:
> /var/log/ovirt-engine/engine-setup_2012_04_28_01_13_01.log
> * Please use the user "admin" and password specified in order to
> login
> into oVirt Engine
> * To configure additional users, first configure authentication
> domains using the 'engine-manage-domains' utility
> * To access oVirt Engine please go to the following URL:
> http://ovirt-engine-112:80
> [root at ovirt-engine-112 ~]#
>
>
> --
> Shu Ming<shuming at linux.vnet.ibm.com>
> IBM China Systems and Technology Laboratory
>
>
> _______________________________________________
> Engine-devel mailing list
> Engine-devel at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/engine-devel
>
More information about the Engine-devel
mailing list