[Engine-devel] Fwd: the procedure of storage-related

[Vered Volansky]

I'm not that familiarized with the code myself and can't tell you without looking into it and debugging it.
What I would do is - for any command I'd like the internal flow of - start at the top (All vds commands are listed when you type vdsClient, without the need to actually run something).
You can then search the specific command you're interested in in the code, and see the flow there.
You can obviously run a specific command if you have the correct setup and follow through with the vdsm.log to see the exact flow. You can, of course, add your own debug messages to make things clearer for you, as the vdsm log is logged to very frequently.

----- Original Message -----
> From: "bigclouds" <bigclouds at 163.com>
> To: "Vered Volansky" <vered at redhat.com>
> Cc: engine-devel at ovirt.org, "users" <users at ovirt.org>, vdsm-devel at lists.fedorahosted.org
> Sent: Sunday, April 28, 2013 1:25:55 PM
> Subject: Re: [Engine-devel] Fwd:  the procedure of storage-related
> 
> hi,
> maybe i do not make you understand me fully. i am reading vdsm code, but it
> is hard for me to understand StorageDomain,StoragePool. before stoargeD(P)
> can work, engine must prepare many things.
>  i want to know  the call flow (process) which must be done to make
>  storageS(P) work.
>  
> 1.for example, what  funcitons you should call  if make a  stoargeDomain
> work.
>   poolConnectStorageServer->poolCreate->poolConnect->domainCreate->domainActivate.
>  
> thanks
> 
> 
> 
> 
> At 2013-04-28 17:40:29,"Vered Volansky" <vered at redhat.com> wrote:
> >
> >
> >----- Forwarded Message -----
> >> From: "Vered Volansky" <vered at redhat.com>
> >> To: "bigclouds" <bigclouds at 163.com>
> >> Sent: Sunday, April 28, 2013 12:39:31 PM
> >> Subject: Re: [Engine-devel] the procedure of storage-related
> >> 
> >> Hi,
> >> 
> >> Find my answers below.
> >> 
> >> Best Regards,
> >> Vered
> >> 
> >> ----- Original Message -----
> >> > From: "bigclouds" <bigclouds at 163.com>
> >> > To: "engine-devel" <engine-devel at ovirt.org>
> >> > Sent: Saturday, April 27, 2013 8:40:56 AM
> >> > Subject: [Engine-devel] the procedure of storage-related
> >> > 
> >> > hi,all
> >> > 1.i am now not very familar with the right procedure of storage,
> >> >     please give me a simply introduction of their concept and relation.
> >> >     help
> >> >     me out
> >> >  
> >> > StoragePool,StorageDomain
> >> > image,volume
> >> 
> >> You should find the following link helpful:
> >> http://www.ovirt.org/Vdsm_Storage_Terminology
> >> 
> >> As per your other questions, you might find the following guide helpul:
> >> http://www.ovirt.org/Quick_Start_Guide#Configure_Storage
> >> 
> >> Of not, please rephrase them as they're not clear enough and I'd rather
> >> not
> >> guess.
> >> 
> >> 
> >> >  
> >> >  
> >> > 2.please help me confirm.
> >> > i find only one place call mount command, which is
> >> > poolConnectStorageServer.
> >> > if poolConnectStorageServer is before create and active
> >> > StoragePool,StorageDomain?
> >> >  
> >> > 3.if attach is just modify metadata, not anything else?
> >> >  
> >> > 4.sp.py, deactivateSD
> >> >   if i deactivate ISO storage,it finally umount masterDir, why  ?
> >> >   if masterDir is not  mastersd?
> >> > thanks
> >> > 
> >> > 
> >> > 
> >> > _______________________________________________
> >> > Engine-devel mailing list
> >> > Engine-devel at ovirt.org
> >> > http://lists.ovirt.org/mailman/listinfo/engine-devel
> >> > 
> >> 
> >_______________________________________________
> >Engine-devel mailing list
> >Engine-devel at ovirt.org
> >http://lists.ovirt.org/mailman/listinfo/engine-devel
> 
> _______________________________________________
> Engine-devel mailing list
> Engine-devel at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/engine-devel
>