[Engine-devel] if there is a updated debug environment how to?

[Alon Bar-Lev]

----- Original Message -----
> From: "Alexander Wels" <awels at redhat.com>
> To: "Alon Bar-Lev" <alonbl at redhat.com>
> Cc: engine-devel at ovirt.org, "bigclouds" <bigclouds at 163.com>
> Sent: Friday, June 7, 2013 4:14:59 PM
> Subject: Re: [Engine-devel] if there is a updated debug environment how to?
> 
> On Friday, June 07, 2013 08:26:32 AM Alon Bar-Lev wrote:
> > ----- Original Message -----
> > 
> > > From: "Alexander Wels" <awels at redhat.com>
> > > To: engine-devel at ovirt.org
> > > Cc: "Alon Bar-Lev" <alonbl at redhat.com>, "bigclouds" <bigclouds at 163.com>
> > > Sent: Friday, June 7, 2013 3:09:19 PM
> > > Subject: Re: [Engine-devel] if there is a updated debug environment how
> > > to?
> > > 
> > > On Friday, June 07, 2013 03:46:12 AM Alon Bar-Lev wrote:
> > > > ----- Original Message -----
> > > > 
> > > > > From: "bigclouds" <bigclouds at 163.com>
> > > > > To: "Alon Bar-Lev" <alonbl at redhat.com>
> > > > > Cc: "Eli Mesika" <emesika at redhat.com>, "engine-devel"
> > > > > <engine-devel at ovirt.org> Sent: Friday, June 7, 2013 10:29:25 AM
> > > > > Subject: Re:Re: [Engine-devel] if there is a updated debug
> > > > > environment
> > > > > how
> > > > > to?
> > > > > 
> > > > > so many thinks,i  finally make it.
> > > > > 
> > > > > if i can debug gwt  in this environment?  and how?
> > > > > 
> > > > > 
> > > > > if this link is still in use, http://www.ovirt.org/DebugFrontend
> > > > > 
> > > > > thanks.
> > > > 
> > > > This is interesting, I would like to work with someone that knows GWT
> > > > to
> > > > make this happen.
> > > > 
> > > > If I read this correctly, all you need to do is:
> > > > 
> > > > $ make install-dev PREFIX="${HOME}/ovirt-engine"
> > > > EXTRA_BUILD_FLAGS_DEV="-Pgwtdev"
> > > > 
> > > > And connect eclipse using the standard jboss debug port.
> > > > 
> > > > But I know nothing of GWT, I will appreciate help in that...
> > > > 
> > > > How do we connect to a running instance of jboss and debug gwt, what
> > > > setting
> > > > should we have?
> > 
> > Hi Alex,
> > 
> > > Once you have the engine up and running as explained about, you can use
> > > http://www.ovirt.org/DebugFrontend to run GWT debugging. You can safely
> > > skip step 0
> > > in that document (I think that needs to be updated). And start at step 1.
> > > The document explains quite well what to do, but the short version is:
> > > 
> > > 1. cd into the source code directory of either webadmin or user portal.
> > > Usually: ovirt-
> > > engine/frontend/webadmin/modules/(webadmin or userportal-gwtp)
> > > 2. mvn gwt:debug -Pgwtdev,gwt-admin,gwt-user -Dgwt.noserver=true from the
> > > command line. Once it is done compiling it will tell you it is listening
> > > on
> > > port 8000.
> > 
> > This will not run as jboss, right?
> 
> No it is a normal java application (The GWT debugger).
> 
> > Or you mean it will run on the jboss of the legacy (not the new
> > environment). I would like a solution in which we can use the already
> > running jboss instance that use for production in order to debug gwt. Is
> > that possible?
> > I guess some properties need to be passed, or new modules.
> > 
> > Thanks!
> 
> The GWT debugger is completely agnostic with regards to what serves the host
> page. The GWT debugger is connected to the browser, not the server. The host
> page can be served from a local JBOSS, a remote Apache, a file, whatever. The
> GWT debugger doesn't care as it is talking to the browser.

Can you please explain this text from the wiki:

gwt.noserver tells Development Mode that the application is already deployed on JBoss AS (don't use embedded Jetty instance to serve application content) 

Or this:

Q: Client-side logs are not persisted on Engine, e.g. $JBOSS_HOME/standalone/log/engine/engine-ui.log.
A: Currently, client-side logs are enabled only when debugging the application via Development Mode.

What listens on port 8700?

Thanks!

> 
> IMO the only thing we could do to improve this is update the make file to
> provide a target to start the debugger, which basically just calls maven with
> the appropriate parameters.
> 
> 
> > 
> > > 3.In eclipse (or your favorite java IDE) make a remote java application
> > > connection to
> > > port 8000
> > > 4. Once connected this will open up a GWT debug window.
> > > 5. In your browser as ?gwt.codesvr=127.0.0.1:9997 to the url you are
> > > working with and
> > > refresh the page.
> > > 6. It will either ask you to install the plugin in your browser or load
> > > the
> > > page depending
> > > on if you have the plugin already.
> > > 
> > > Alexander
> > > 
> > > > Thanks!
> > > > 
> > > > > At 2013-06-07 14:55:41,"Alon Bar-Lev" <alonbl at redhat.com> wrote:
> > > > > >----- Original Message -----
> > > > > >
> > > > > >> From: "bigclouds" <bigclouds at 163.com>
> > > > > >> To: "Eli Mesika" <emesika at redhat.com>
> > > > > >> Cc: "engine-devel" <engine-devel at ovirt.org>
> > > > > >> Sent: Friday, June 7, 2013 3:49:15 AM
> > > > > >> Subject: Re: [Engine-devel] if there is a updated debug
> > > > > >> environment
> > > > > >> how
> > > > > >> to?
> > > > > >> 
> > > > > >> hi:
> > > > > >> there is error when engine-setup-2. finally only 8702 and 8703
> > > > > >> port
> > > > > >> is
> > > > > >> in
> > > > > >> listen state.
> > > > > >> i can not visit 8080 via browser.
> > > > > >
> > > > > >Well, if setup fails... probably application won't work.
> > > > > >
> > > > > >> engine-setup-2 
> > > > > >> [ INFO  ] Creating CA
> > > > > >> [ INFO  ] Creating database schema
> > > > > >> [ ERROR ] Failed to execute stage 'Misc configuration': Command
> > > > > >> '/home/best/ovirt-engine/share/ovirt-engine/dbscripts/create_schema
> > > > > >> .sh'
> > > > > >> failed to execute
> > > > > >> [ INFO  ] Stage: Clean up
> > > > > >> Log file is located at /tmp/ovirt-engine-setup-20130606172206.log
> > > > > >
> > > > > >What database have you  used?
> > > > > >If you don't have anything important there, can you please try to
> > > > > >initialize it so you start fresh?
> > > > > >
> > > > > ># systemctl stop postgresql.service
> > > > > ># rm -fr /var/lib/pgsql
> > > > > ># postgresql-setup initdb
> > > > > ># vi /var/lib/pgsql/data/pg_hba.conf
> > > > > >modify 127.0.0.1/32 and ::1/128 lines to password at last field
> > > > > ># su - postgres -c psql -d template1
> > > > > >template1=# create user engine password 'engine';
> > > > > >template1=# create database engine owner engine;
> > > > > ># \q
> > > > > >
> > > > > >> At 2013-06-06 05:17:07,"Eli Mesika" <emesika at redhat.com> wrote:
> > > > > >> >----- Original Message -----
> > > > > >> >
> > > > > >> >> From: "bigclouds" <bigclouds at 163.com>
> > > > > >> >> To: "engine-devel" <engine-devel at ovirt.org>
> > > > > >> >> Sent: Wednesday, June 5, 2013 12:34:30 PM
> > > > > >> >> Subject: [Engine-devel] if there is a updated debug environment
> > > > > >> >> how
> > > > > >> >> to?
> > > > > >> >> 
> > > > > >> >> hi, engine guys:
> > > > > >> >> i want to make a engine debug environment for a looong time,
> > > > > >> >> due
> > > > > >> >> to
> > > > > >> >> all
> > > > > >> >> 
> > > > > >> >>  kinds
> > > > > >> >> 
> > > > > >> >> of reasons i have not made it.
> > > > > >> >> now i still have the need for a debug environment. (it seems
> > > > > >> >> like
> > > > > >> >> that
> > > > > >> >> i
> > > > > >> >> 
> > > > > >> >>  am
> > > > > >> >> 
> > > > > >> >> keeped away from you all)
> > > > > >> >> if there is a updated doc for building engine debug
> > > > > >> >> environment?
> > > > > >> >> thanks so much.
> > > > > >> >
> > > > > >> >Please follow Allon's B L doc on how to create a development
> > > > > >> >environment
> > > > > >> >
> > > > > >> >http://www.ovirt.org/OVirt_Engine_Development_Environment
> > > > > >> >
> > > > > >> >> _______________________________________________
> > > > > >> >> Engine-devel mailing list
> > > > > >> >> Engine-devel at ovirt.org
> > > > > >> >> http://lists.ovirt.org/mailman/listinfo/engine-devel
> > > > > >> 
> > > > > >> _______________________________________________
>