[Kimchi-devel] [PATCH 02/15] V3 Ginger Base : base folder files part 1
chandra at linux.vnet.ibm.com
chandra at linux.vnet.ibm.com
Wed Oct 7 10:36:39 UTC 2015
From: chandrureddy <chandra at linux.vnet.ibm.com>
---
src/wok/plugins/gingerbase/API.json | 175 ++++++++
src/wok/plugins/gingerbase/INSTALL | 369 ++++++++++++++++
src/wok/plugins/gingerbase/Makefile.am | 155 +++++++
src/wok/plugins/gingerbase/VERSION | 1 +
src/wok/plugins/gingerbase/__init__.py | 21 +
src/wok/plugins/gingerbase/autogen.sh | 21 +
src/wok/plugins/gingerbase/config.py.in | 59 +++
src/wok/plugins/gingerbase/config.rpath | 672 +++++++++++++++++++++++++++++
src/wok/plugins/gingerbase/configure.ac | 103 +++++
src/wok/plugins/gingerbase/gingerbase.conf | 32 ++
src/wok/plugins/gingerbase/gingerbase.py | 62 +++
src/wok/plugins/gingerbase/lscpu.py | 122 ++++++
src/wok/plugins/gingerbase/mockmodel.py | 298 +++++++++++++
13 files changed, 2090 insertions(+)
create mode 100644 src/wok/plugins/gingerbase/API.json
create mode 100644 src/wok/plugins/gingerbase/INSTALL
create mode 100644 src/wok/plugins/gingerbase/Makefile.am
create mode 100644 src/wok/plugins/gingerbase/VERSION
create mode 100644 src/wok/plugins/gingerbase/__init__.py
create mode 100755 src/wok/plugins/gingerbase/autogen.sh
create mode 100644 src/wok/plugins/gingerbase/config.py.in
create mode 100644 src/wok/plugins/gingerbase/config.rpath
create mode 100644 src/wok/plugins/gingerbase/configure.ac
create mode 100644 src/wok/plugins/gingerbase/gingerbase.conf
create mode 100644 src/wok/plugins/gingerbase/gingerbase.py
create mode 100644 src/wok/plugins/gingerbase/lscpu.py
create mode 100644 src/wok/plugins/gingerbase/mockmodel.py
diff --git a/src/wok/plugins/gingerbase/API.json b/src/wok/plugins/gingerbase/API.json
new file mode 100644
index 0000000..7b77eac
--- /dev/null
+++ b/src/wok/plugins/gingerbase/API.json
@@ -0,0 +1,175 @@
+{
+ "$schema": "http://json-schema.org/draft-03/schema#",
+ "title": "Ginger Base API",
+ "description": "Json schema for Gigner Base API",
+ "type": "object",
+ "gingerbasetype": {
+ "cpu_info": {
+ "description": "Configure CPU specifics for a VM.",
+ "type": "object",
+ "properties": {
+ "topology": {
+ "description": "Configure the guest CPU topology.",
+ "type": "object",
+ "properties": {
+ "sockets": {
+ "type": "integer",
+ "required": true,
+ "minimum": 1,
+ "error": "GGBHOST0005E"
+ },
+ "cores": {
+ "type": "integer",
+ "required": true,
+ "minimum": 1,
+ "error": "GGBHOST0005E"
+ },
+ "threads": {
+ "type": "integer",
+ "required": true,
+ "minimum": 1,
+ "error": "GGBHOST0005E"
+ }
+ }
+ }
+ }
+ }
+ },
+ "properties": {
+ "debugreports_create": {
+ "type": "object",
+ "error": "GGBDR0006E",
+ "properties": {
+ "name": {
+ "description": "The name for the debug report file.",
+ "type": "string",
+ "pattern": "^[_A-Za-z0-9-]*$",
+ "error": "GGBDR0007E"
+ }
+ }
+ },
+ "debugreport_update": {
+ "type": "object",
+ "properties": {
+ "name": {
+ "description": "New name of debug report",
+ "type": "string",
+ "pattern": "^[_A-Za-z0-9-]*$",
+ "error": "GGBDR0007E"
+ }
+ },
+ "additionalProperties": false
+ },
+ "repositories_create": {
+ "type": "object",
+ "properties": {
+ "repo_id": {
+ "description": "Repository ID used for YUM repository.",
+ "type": "string",
+ "error": "GGBREPOS0001E"
+ },
+ "baseurl": {
+ "description": "URL to the directory where the repodata directory of a repository is located. Can be an http://, ftp:// or file:// URL.",
+ "type": "string",
+ "error": "GGBREPOS0002E"
+ },
+ "config": {
+ "description": "Dictionary containing repository configuration",
+ "type": "object",
+ "error": "GGBREPOS0003E",
+ "properties": {
+ "dist": {
+ "description": "Distribution to DEB repository",
+ "type": "string",
+ "error": "GGBREPOS0004E"
+ },
+ "comps": {
+ "description": "List of components to DEB repository",
+ "type": "array",
+ "error": "GGBREPOS0005E",
+ "uniqueItems": true,
+ "items": {
+ "description": "Component name",
+ "type": "string",
+ "error": "GGBREPOS0006E"
+ }
+ },
+ "repo_name": {
+ "description": "YUM repository name",
+ "type": "string",
+ "error": "GGBREPOS0023E"
+ },
+ "mirrorlist": {
+ "description": "URL to a file containing a list of baseurls",
+ "type": "string",
+ "error": "GGBREPOS0007E"
+ },
+ "metalink": {
+ "description": "URL to a metalink file for the repomd.xml",
+ "type": "string",
+ "error": "GGBREPOS0029E"
+ }
+ }
+ }
+ },
+ "additionalProperties": false,
+ "error": "KCHAPI0001E"
+ },
+ "repository_update": {
+ "type": "object",
+ "properties": {
+ "baseurl": {
+ "description": "URL to the directory where the repodata directory of a repository is located. Can be an http://, ftp:// or file:// URL.",
+ "type": "string",
+ "error": "GGBREPOS0002E"
+ },
+ "config": {
+ "description": "Dictionary containing repository configuration",
+ "type": "object",
+ "error": "GGBREPOS0003E",
+ "properties": {
+ "dist": {
+ "description": "Distribution to DEB repository",
+ "type": "string",
+ "error": "GGBREPOS0004E"
+ },
+ "comps": {
+ "description": "List of components to DEB repository",
+ "type": "array",
+ "error": "GGBREPOS0005E",
+ "uniqueItems": true,
+ "items": {
+ "description": "Component name",
+ "type": "string",
+ "error": "GGBREPOS0006E"
+ }
+ },
+ "repo_name": {
+ "description": "Human-readable string describing the YUM repository.",
+ "type": "string",
+ "error": "GGBREPOS0008E"
+ },
+ "mirrorlist": {
+ "description": "URL to a file containing a list of baseurls for YUM repository",
+ "type": "string",
+ "error": "GGBREPOS0007E"
+ },
+ "gpgcheck": {
+ "description": "Indicates if a GPG signature check on the packages gotten from repository should be performed.",
+ "type": "boolean",
+ "error": "GGBREPOS0009E"
+ },
+ "gpgkey": {
+ "description": "URL pointing to the ASCII-armored GPG key file for the repository.",
+ "type": "string",
+ "error": "GGBREPOS0010E"
+ }
+ }
+ }
+ },
+ "additionalProperties": false,
+ "error": "GGBAPI0001E"
+
+ }
+ }
+}
diff --git a/src/wok/plugins/gingerbase/INSTALL b/src/wok/plugins/gingerbase/INSTALL
new file mode 100644
index 0000000..63bf076
--- /dev/null
+++ b/src/wok/plugins/gingerbase/INSTALL
@@ -0,0 +1,369 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Inc.
+
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+ The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
+
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package, generally using the just-built uninstalled binaries.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
+
+ 6. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+ Some packages offer the ability to configure how verbose the
+execution of `make' will be. For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved. Use GNU `make'
+instead.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS
+ KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+ Use DIR as the installation prefix. *note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
diff --git a/src/wok/plugins/gingerbase/Makefile.am b/src/wok/plugins/gingerbase/Makefile.am
new file mode 100644
index 0000000..c24bb16
--- /dev/null
+++ b/src/wok/plugins/gingerbase/Makefile.am
@@ -0,0 +1,155 @@
+#
+# Ginger Base
+#
+# Copyright IBM Corp, 2015
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+SUBDIRS = contrib control docs model po tests ui
+
+gingerbase_PYTHON = $(filter-out config.py, $(wildcard *.py))
+
+nodist_gingerbase_PYTHON = config.py
+
+wokdir = $(pythondir)/wok
+gingerbasedir = $(pythondir)/wok/plugins/gingerbase
+
+confdir = $(sysconfdir)/wok/plugins.d
+dist_conf_DATA = gingerbase.conf
+
+AUTOMAKE_OPTIONS = foreign
+
+ACLOCAL_AMFLAGS = --install -I m4
+
+EXTRA_DIST = \
+ config.rpath \
+ API.json \
+ autogen.sh \
+ COPYING.ASL2 \
+ COPYING.LGPL \
+ CONTRIBUTE.md \
+ VERSION \
+ build-aux/pkg-version \
+ config.py.in \
+ $(NULL)
+
+
+PEP8_BLACKLIST = *config.py,*i18n.py,*tests/test_config.py
+
+I18N_FILES = ./i18n.py \
+ $(NULL)
+
+check-local:
+ contrib/check_i18n.py $(I18N_FILES)
+ find . -path './.git' -prune -type f -o \
+ -name '*.py' -o -name '*.py.in' | xargs $(PYFLAKES) | \
+ while read LINE; do echo "$$LINE"; false; done
+
+ $(PEP8) --version
+ $(PEP8) --filename '*.py,*.py.in' --exclude="$(PEP8_BLACKLIST)" .
+
+
+# Link built mo files in the source tree to enable use of translations from
+# within the source tree
+all-local:
+ while read L && test -n "$$L"; do \
+ dir=mo/$$L/LC_MESSAGES ; \
+ $(MKDIR_P) $$dir ; \
+ ln -sf ../../../po/$$L.gmo $$dir/gingerbase.mo ; \
+ done < po/LINGUAS
+
+do_substitution = \
+ sed -e 's,[@]prefix[@],$(prefix),g' \
+ -e 's,[@]datadir[@],$(datadir),g' \
+ -e 's,[@]sysconfdir[@],$(sysconfdir),g' \
+ -e 's,[@]localstatedir[@],$(localstatedir),g' \
+ -e 's,[@]pkgdatadir[@],$(pkgdatadir),g' \
+ -e 's,[@]wokdir[@],$(wokdir),g' \
+ -e 's,[@]gingerbasedir[@],$(gingerbasedir),g' \
+ -e 's,[@]kimchiversion[@],$(PACKAGE_VERSION),g' \
+ -e 's,[@]kimchirelease[@],$(PACKAGE_RELEASE),g' \
+ -e 's,[@]withspice[@],$(WITH_SPICE),g'
+
+config.py: config.py.in Makefile
+ $(do_substitution) < $(srcdir)/config.py.in > config.py
+
+
+#
+# Packaging helpers
+#
+
+install-deb: install
+ cp -R $(top_srcdir)/contrib/DEBIAN $(DESTDIR)/
+ mkdir -p $(DESTDIR)/$(localstatedir)/lib/wok/
+ touch $(DESTDIR)/$(localstatedir)/lib/wok/objectstore
+ mkdir -p $(DESTDIR)/$(localstatedir)/lib/wok/plugins/gingerbase/debugreports
+
+
+deb: contrib/make-deb.sh
+ $(top_srcdir)/contrib/make-deb.sh
+
+gingerbase.spec: contrib/gingerbase.spec.fedora contrib/gingerbase.spec.suse
+ @if test -e /etc/redhat-release; then \
+ ln -sf contrib/gingerbase.spec.fedora $@ ; \
+ elif test -e /etc/SuSE-release; then \
+ ln -sf contrib/gingerbase.spec.suse $@ ; \
+ else \
+ echo "Unable to select a spec file for RPM build" ; \
+ /bin/false ; \
+ fi
+
+rpm: dist gingerbase.spec
+ $(MKDIR_P) rpm/BUILD rpm/RPMS rpm/SOURCES rpm/SPECS rpm/SRPMS
+ cp $(top_srcdir)/gingerbase.spec rpm/SPECS/gingerbase.spec
+ cp $(DIST_ARCHIVES) rpm/SOURCES
+ rpmbuild -ba --define "_topdir `pwd`/rpm" rpm/SPECS/gingerbase.spec
+
+fedora-rpm: contrib/gingerbase.spec.fedora
+ ln -sf contrib/gingerbase.spec.fedora gingerbase.spec
+ $(MAKE) rpm
+
+suse-rpm: contrib/gingerbase.spec.suse
+ ln -sf contrib/gingerbase.spec.suse gingerbase.spec
+ $(MAKE) rpm
+
+ChangeLog:
+ @if test -d .git; then \
+ $(top_srcdir)/build-aux/genChangelog --release > $@; \
+ fi
+
+install-data-local:
+ $(MKDIR_P) $(DESTDIR)/$(localstatedir)/lib/wok/
+ touch $(DESTDIR)/$(localstatedir)/lib/wok/objectstore
+ $(MKDIR_P) $(DESTDIR)$(gingerbasedir)
+ $(INSTALL_DATA) API.json $(DESTDIR)$(gingerbasedir)/API.json
+ mkdir -p $(DESTDIR)/$(localstatedir)/lib/wok/plugins/gingerbase/debugreports
+
+uninstall-local:
+ $(RM) $(DESTDIR)$(gingerbasedir)/API.json
+ $(RM) -rf $(DESTDIR)/$(localstatedir)/lib/wok/plugins/gingerbase
+
+VERSION:
+ @if test -d .git; then \
+ git describe --abbrev=0 > $@; \
+ fi
+
+.PHONY: deb install-deb rpm fedora-rpm suse-rpm ChangeLog VERSION
+
+
+clean-local:
+ rm -rf mo rpm
+
+BUILT_SOURCES = config.py
+CLEANFILES = config.py gingerbase.spec `find "$(top_srcdir)" -type f -name "*.pyc" -print`
diff --git a/src/wok/plugins/gingerbase/VERSION b/src/wok/plugins/gingerbase/VERSION
new file mode 100644
index 0000000..bc80560
--- /dev/null
+++ b/src/wok/plugins/gingerbase/VERSION
@@ -0,0 +1 @@
+1.5.0
diff --git a/src/wok/plugins/gingerbase/__init__.py b/src/wok/plugins/gingerbase/__init__.py
new file mode 100644
index 0000000..21a12a9
--- /dev/null
+++ b/src/wok/plugins/gingerbase/__init__.py
@@ -0,0 +1,21 @@
+#
+# Project Ginger Base
+#
+# Copyright IBM, Corp. 2015
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+from gingerbase import GingerBase
+__all__ = [GingerBase]
diff --git a/src/wok/plugins/gingerbase/autogen.sh b/src/wok/plugins/gingerbase/autogen.sh
new file mode 100755
index 0000000..0f22dba
--- /dev/null
+++ b/src/wok/plugins/gingerbase/autogen.sh
@@ -0,0 +1,21 @@
+#!/bin/bash
+
+aclocal
+automake --add-missing
+autoreconf
+
+if [ ! -f "configure" ]; then
+ echo "Failed to generate configure script. Check to make sure autoconf, "
+ echo "automake, and other build dependencies are properly installed."
+ exit 1
+fi
+
+if [ "x$1" == "x--system" ]; then
+ ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
+else
+ if [ $# -gt 0 ]; then
+ ./configure $@
+ else
+ ./configure --prefix=/usr/local
+ fi
+fi
diff --git a/src/wok/plugins/gingerbase/config.py.in b/src/wok/plugins/gingerbase/config.py.in
new file mode 100644
index 0000000..b80b6fe
--- /dev/null
+++ b/src/wok/plugins/gingerbase/config.py.in
@@ -0,0 +1,59 @@
+#
+# Project Ginger Base
+#
+# Copyright IBM, Corp. 2015
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+import os
+import threading
+
+from wok.config import CACHEEXPIRES, PluginConfig, PluginPaths
+
+gingerBaseLock = threading.Lock()
+
+
+def get_debugreports_path():
+ return os.path.join(PluginPaths('gingerbase').state_dir, 'debugreports')
+
+
+class GingerBasePaths(PluginPaths):
+
+ def __init__(self):
+ super(GingerBasePaths, self).__init__('gingerbase')
+
+
+gingerBasePaths = GingerBasePaths()
+
+
+class GingerBaseConfig(PluginConfig):
+ def __init__(self):
+ super(GingerBaseConfig, self).__init__('gingerbase')
+
+ custom_config = {}
+ for dirname in ('css', 'js', 'images'):
+ custom_config['/' + dirname] = {
+ 'tools.staticdir.on': True,
+ 'tools.staticdir.dir': os.path.join(gingerBasePaths.ui_dir,
+ dirname),
+ 'tools.wokauth.on': False,
+ 'tools.nocache.on': False}
+ if dirname != 'images':
+ custom_config['/' + dirname].update({
+ 'tools.expires.on': True,
+ 'tools.expires.secs': CACHEEXPIRES})
+
+ self.update(custom_config)
diff --git a/src/wok/plugins/gingerbase/config.rpath b/src/wok/plugins/gingerbase/config.rpath
new file mode 100644
index 0000000..17298f2
--- /dev/null
+++ b/src/wok/plugins/gingerbase/config.rpath
@@ -0,0 +1,672 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+# Copyright 1996-2010 Free Software Foundation, Inc.
+# Taken from GNU libtool, 2001
+# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# The first argument passed to this file is the canonical host specification,
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+# than 256 bytes, otherwise the compiler driver will dump core. The only
+# known workaround is to choose shorter directory names for the build
+# directory and/or the installation directory.
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
+
+# Code taken from libtool.m4's _LT_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+ wl='-Wl,'
+else
+ case "$host_os" in
+ aix*)
+ wl='-Wl,'
+ ;;
+ darwin*)
+ case $cc_basename in
+ xlc*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ wl='-Wl,'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ wl='-Wl,'
+ ;;
+ newsos6)
+ ;;
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ ecc*)
+ wl='-Wl,'
+ ;;
+ icc* | ifort*)
+ wl='-Wl,'
+ ;;
+ lf95*)
+ wl='-Wl,'
+ ;;
+ pgcc | pgf77 | pgf90)
+ wl='-Wl,'
+ ;;
+ ccc*)
+ wl='-Wl,'
+ ;;
+ como)
+ wl='-lopt='
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ osf3* | osf4* | osf5*)
+ wl='-Wl,'
+ ;;
+ rdos*)
+ ;;
+ solaris*)
+ wl='-Wl,'
+ ;;
+ sunos4*)
+ wl='-Qoption ld '
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ wl='-Wl,'
+ ;;
+ sysv4*MP*)
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ wl='-Wl,'
+ ;;
+ unicos*)
+ wl='-Wl,'
+ ;;
+ uts4*)
+ ;;
+ esac
+fi
+
+# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
+ # option of GNU ld is called -rpath, not --rpath.
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ case "$host_os" in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # Samuel A. Falvo II <kc5tja at dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we cannot use
+ # them.
+ ld_shlibs=no
+ ;;
+ beos*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ cygwin* | mingw* | pw32* | cegcc*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ gnu* | linux* | k*bsd*-gnu)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ netbsd*)
+ ;;
+ solaris*)
+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+ sunos4*)
+ hardcode_direct=yes
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ if test "$ld_shlibs" = no; then
+ hardcode_libdir_flag_spec=
+ fi
+else
+ case "$host_os" in
+ aix3*)
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ else
+ aix_use_runtimelinking=no
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+ fi
+ hardcode_direct=yes
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ fi
+ # Begin _LT_AC_SYS_LIBPATH_AIX.
+ echo 'int main () { return 0; }' > conftest.c
+ ${CC} ${LDFLAGS} conftest.c -o conftest
+ aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ fi
+ if test -z "$aix_libpath"; then
+ aix_libpath="/usr/lib:/lib"
+ fi
+ rm -f conftest.c conftest
+ # End _LT_AC_SYS_LIBPATH_AIX.
+ if test "$aix_use_runtimelinking" = yes; then
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ else
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ fi
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+ bsdi[45]*)
+ ;;
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ libext=lib
+ ;;
+ darwin* | rhapsody*)
+ hardcode_direct=no
+ if test "$GCC" = yes ; then
+ :
+ else
+ case $cc_basename in
+ xlc*)
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+ fi
+ ;;
+ dgux*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+ freebsd2.2*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ freebsd2*)
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ freebsd* | dragonfly*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ hpux9*)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ hpux10*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+ hpux11*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ ;;
+ *)
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+ irix5* | irix6* | nonstopux*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ netbsd*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ newsos6)
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ else
+ case "$host_os" in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ osf3*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ osf4* | osf5*)
+ if test "$GCC" = yes; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ # Both cc and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ hardcode_libdir_separator=:
+ ;;
+ solaris*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ sunos4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ sysv4)
+ case $host_vendor in
+ sni)
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ hardcode_direct=no
+ ;;
+ motorola)
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ ;;
+ sysv4.3*)
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ ld_shlibs=yes
+ fi
+ ;;
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ ;;
+ sysv5* | sco3.2v5* | sco5v6*)
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+ hardcode_libdir_separator=':'
+ ;;
+ uts4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
+# Unlike libtool.m4, here we don't care about _all_ names of the library, but
+# only about the one the linker finds when passed -lNAME. This is the last
+# element of library_names_spec in libtool.m4, or possibly two of them if the
+# linker has special search rules.
+library_names_spec= # the last element of library_names_spec in libtool.m4
+libname_spec='lib$name'
+case "$host_os" in
+ aix3*)
+ library_names_spec='$libname.a'
+ ;;
+ aix[4-9]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ amigaos*)
+ library_names_spec='$libname.a'
+ ;;
+ beos*)
+ library_names_spec='$libname$shrext'
+ ;;
+ bsdi[45]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ cygwin* | mingw* | pw32* | cegcc*)
+ shrext=.dll
+ library_names_spec='$libname.dll.a $libname.lib'
+ ;;
+ darwin* | rhapsody*)
+ shrext=.dylib
+ library_names_spec='$libname$shrext'
+ ;;
+ dgux*)
+ library_names_spec='$libname$shrext'
+ ;;
+ freebsd1*)
+ ;;
+ freebsd* | dragonfly*)
+ case "$host_os" in
+ freebsd[123]*)
+ library_names_spec='$libname$shrext$versuffix' ;;
+ *)
+ library_names_spec='$libname$shrext' ;;
+ esac
+ ;;
+ gnu*)
+ library_names_spec='$libname$shrext'
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $host_cpu in
+ ia64*)
+ shrext=.so
+ ;;
+ hppa*64*)
+ shrext=.sl
+ ;;
+ *)
+ shrext=.sl
+ ;;
+ esac
+ library_names_spec='$libname$shrext'
+ ;;
+ interix[3-9]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ library_names_spec='$libname$shrext'
+ case "$host_os" in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+ *) libsuff= shlibsuff= ;;
+ esac
+ ;;
+ esac
+ ;;
+ linux*oldld* | linux*aout* | linux*coff*)
+ ;;
+ linux* | k*bsd*-gnu)
+ library_names_spec='$libname$shrext'
+ ;;
+ knetbsd*-gnu)
+ library_names_spec='$libname$shrext'
+ ;;
+ netbsd*)
+ library_names_spec='$libname$shrext'
+ ;;
+ newsos6)
+ library_names_spec='$libname$shrext'
+ ;;
+ nto-qnx*)
+ library_names_spec='$libname$shrext'
+ ;;
+ openbsd*)
+ library_names_spec='$libname$shrext$versuffix'
+ ;;
+ os2*)
+ libname_spec='$name'
+ shrext=.dll
+ library_names_spec='$libname.a'
+ ;;
+ osf3* | osf4* | osf5*)
+ library_names_spec='$libname$shrext'
+ ;;
+ rdos*)
+ ;;
+ solaris*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sunos4*)
+ library_names_spec='$libname$shrext$versuffix'
+ ;;
+ sysv4 | sysv4.3*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sysv4*MP*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ library_names_spec='$libname$shrext'
+ ;;
+ uts4*)
+ library_names_spec='$libname$shrext'
+ ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Format of library name prefix.
+libname_spec="$escaped_libname_spec"
+
+# Library names that the linker finds when passed -lNAME.
+library_names_spec="$escaped_library_names_spec"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+EOF
diff --git a/src/wok/plugins/gingerbase/configure.ac b/src/wok/plugins/gingerbase/configure.ac
new file mode 100644
index 0000000..00aba89
--- /dev/null
+++ b/src/wok/plugins/gingerbase/configure.ac
@@ -0,0 +1,103 @@
+#
+# Ginger Base
+#
+# Copyright IBM Corp, 2015
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+AC_INIT([gingerbase], [m4_esyscmd([./build-aux/pkg-version --version])])
+
+AC_SUBST([PACKAGE_VERSION],
+ [m4_esyscmd([./build-aux/pkg-version --version])])
+
+AC_SUBST([PACKAGE_RELEASE],
+ [m4_esyscmd([./build-aux/pkg-version --release])])
+
+# Testing for version and release
+AS_IF([test "x$PACKAGE_VERSION" = x],
+ AC_MSG_ERROR([package version not defined]))
+AS_IF([test "x$PACKAGE_RELEASE" = x],
+ AC_MSG_ERROR([package release not defined]))
+
+AC_CONFIG_AUX_DIR([build-aux])
+AM_INIT_AUTOMAKE([-Wno-portability])
+AM_PATH_PYTHON([2.6])
+AC_PATH_PROG([PEP8], [pep8], [/usr/bin/pep8])
+AC_PYTHON_MODULE([unittest])
+AC_SUBST([HAVE_PYMOD_UNITTEST])
+AC_SUBST([PYTHON_VERSION])
+AM_GNU_GETTEXT([external])
+AM_GNU_GETTEXT_VERSION([0.10])
+AC_PATH_PROG([CHEETAH], [cheetah], [/usr/bin/cheetah])
+
+# Checking for pyflakes
+AC_PATH_PROG([PYFLAKES], [pyflakes])
+if test "x$PYFLAKES" = "x"; then
+ AC_MSG_WARN([pyflakes not found])
+fi
+
+AC_ARG_ENABLE(
+ [sample],
+ [AS_HELP_STRING(
+ [--enable-sample],
+ [enable sample plugin @<:@default=no@:>@]
+ )],
+ ,
+ [enable_sample="no"]
+)
+
+if test "${enable_sample}" = "yes"; then
+AC_SUBST([ENABLE_SAMPLE], [True])
+else
+AC_SUBST([ENABLE_SAMPLE], [False])
+fi
+
+AC_CONFIG_FILES([
+ po/Makefile.in
+ po/gen-pot
+ Makefile
+ docs/Makefile
+ control/Makefile
+ model/Makefile
+ ui/Makefile
+ ui/config/Makefile
+ ui/css/Makefile
+ ui/images/Makefile
+ ui/images/theme-default/Makefile
+ ui/js/Makefile
+ ui/pages/Makefile
+ ui/pages/help/Makefile
+ ui/pages/help/en_US/Makefile
+ ui/pages/help/de_DE/Makefile
+ ui/pages/help/es_ES/Makefile
+ ui/pages/help/fr_FR/Makefile
+ ui/pages/help/it_IT/Makefile
+ ui/pages/help/ja_JP/Makefile
+ ui/pages/help/ko_KR/Makefile
+ ui/pages/help/pt_BR/Makefile
+ ui/pages/help/ru_RU/Makefile
+ ui/pages/help/zh_CN/Makefile
+ ui/pages/help/zh_TW/Makefile
+ contrib/Makefile
+ contrib/DEBIAN/Makefile
+ contrib/DEBIAN/control
+ contrib/gingerbase.spec.fedora
+ contrib/gingerbase.spec.suse
+ tests/Makefile
+],[
+ chmod +x po/gen-pot
+])
+
+AC_OUTPUT
diff --git a/src/wok/plugins/gingerbase/gingerbase.conf b/src/wok/plugins/gingerbase/gingerbase.conf
new file mode 100644
index 0000000..27401c9
--- /dev/null
+++ b/src/wok/plugins/gingerbase/gingerbase.conf
@@ -0,0 +1,32 @@
+[wok]
+enable = True
+plugin_class = "GingerBase"
+uri = "/plugins/gingerbase"
+extra_auth_api_class = "control.sub_nodes"
+
+[/]
+tools.trailing_slash.on = False
+request.methods_with_bodies = ('POST', 'PUT')
+tools.nocache.on = True
+tools.proxy.on = True
+tools.sessions.on = True
+tools.sessions.name = 'wok'
+tools.sessions.secure = True
+tools.sessions.httponly = True
+tools.sessions.locking = 'explicit'
+tools.sessions.storage_type = 'ram'
+tools.sessions.timeout = 10
+tools.wokauth.on = True
+
+[/data/debugreports]
+tools.staticdir.on = True
+tools.staticdir.dir = wok.config.PluginPaths('gingerbase').state_dir + '/debugreports'
+tools.nocache.on = False
+tools.wokauth.on = True
+tools.staticdir.content_types = {'xz': 'application/x-xz'}
+
+[/help]
+tools.staticdir.on = True
+tools.staticdir.dir = wok.config.PluginPaths('gingerbase').ui_dir + '/pages/help'
+tools.nocache.on = True
+
diff --git a/src/wok/plugins/gingerbase/gingerbase.py b/src/wok/plugins/gingerbase/gingerbase.py
new file mode 100644
index 0000000..95a088a
--- /dev/null
+++ b/src/wok/plugins/gingerbase/gingerbase.py
@@ -0,0 +1,62 @@
+#
+# Project Ginger Base
+#
+# Copyright IBM, Corp. 2015
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+import json
+import os
+
+from wok.i18n import messages
+from wok.root import WokRoot
+
+import config
+import mockmodel
+from control import sub_nodes
+from model import model as gingerBaseModel
+
+
+class GingerBase(WokRoot):
+ def __init__(self, wok_options):
+ if hasattr(wok_options, "model"):
+ self.model = wok_options.model
+ elif wok_options.test:
+ self.model = mockmodel.MockModel()
+ else:
+ self.model = gingerBaseModel.Model()
+
+ dev_env = wok_options.environment != 'production'
+ super(GingerBase, self).__init__(self.model, dev_env)
+
+ for ident, node in sub_nodes.items():
+ setattr(self, ident, node(self.model))
+
+ self.api_schema = json.load(open(os.path.join(os.path.dirname(
+ os.path.abspath(__file__)), 'API.json')))
+ self.paths = config.gingerBasePaths
+ self.domain = 'gingerbase'
+ self.messages = messages
+
+ make_dirs = [
+ os.path.abspath(config.get_debugreports_path()),
+ ]
+ for directory in make_dirs:
+ if not os.path.isdir(directory):
+ os.makedirs(directory)
+
+ def get_custom_conf(self):
+ return config.GingerBaseConfig()
+
diff --git a/src/wok/plugins/gingerbase/lscpu.py b/src/wok/plugins/gingerbase/lscpu.py
new file mode 100644
index 0000000..af1c170
--- /dev/null
+++ b/src/wok/plugins/gingerbase/lscpu.py
@@ -0,0 +1,122 @@
+#
+# Project Ginger Base
+#
+# Copyright IBM, Corp. 2015
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+import logging
+
+from wok.utils import run_command
+from wok.exception import NotFoundError
+
+
+class LsCpu(object):
+ """
+ Get CPU information about a CPU hyper threading/architecture on x86
+ """
+ def log_error(e):
+ """
+ param e: error details to be logged
+ """
+ log = logging.getLogger('Util')
+ log.warning('Exception in fetching the CPU architecture details: %s', e)
+
+ def __init__(self):
+ self.lsCpuInfo = {}
+ try:
+ # lscpu - display information about the CPU architecture
+ out, error, rc = run_command(['lscpu'])
+ # Output of lscpu on x86 is expected to be:
+ # Architecture: x86_64
+ # CPU op-mode(s): 32-bit, 64-bit
+ # Byte Order: Little Endian
+ # CPU(s): 4
+ # On-line CPU(s) list: 0-3
+ # Thread(s) per core: 2
+ # Core(s) per socket: 2
+ # Socket(s): 1
+ # NUMA node(s): 1
+ # Vendor ID: GenuineIntel
+ # CPU family: 6
+ # Model: 42
+ # Model name: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz
+ # Stepping: 7
+ # CPU MHz: 976.421
+ # CPU max MHz: 3300.0000
+ # CPU min MHz: 800.0000
+ # BogoMIPS: 5182.99
+ # Virtualization: VT-x
+ # L1d cache: 32K
+ # L1i cache: 32K
+ # L2 cache: 256K
+ # L3 cache: 3072K
+ # NUMA node0 CPU(s): 0-3
+
+ if not rc and (not out.isspace()):
+ lscpuout = out.split('\n')
+ if lscpuout and len(lscpuout) > 0:
+ for line in lscpuout:
+ if ":" in line and (len(line.split(':')) == 2) :
+ self.lsCpuInfo[line.split(':')[0].strip()] = line.split(':')[1].strip()
+ else:
+ continue
+ except Exception, e:
+ self.log_error(e)
+ raise NotFoundError("GGBCPUINF0004E")
+
+ def get_sockets(self):
+ """
+ param self: object of the class self
+ return: Socket(s) (information about the CPU architecture)
+ """
+ try:
+ sockets = "Socket(s)"
+ if len(self.lsCpuInfo) > 0 and sockets in self.lsCpuInfo.keys():
+ return int(self.lsCpuInfo[sockets])
+ else:
+ raise NotFoundError("GGBCPUINF0005E")
+ except IndexError, e:
+ self.log_error(e)
+ raise NotFoundError("GGBCPUINF0005E")
+
+ def get_cores_per_socket(self):
+ """
+ param self: object of the class self
+ return: Core(s) per socket (information about the CPU architecture)
+ """
+ try:
+ cores_per_socket = "Core(s) per socket"
+ if len(self.lsCpuInfo) > 0 and cores_per_socket in self.lsCpuInfo.keys():
+ return int(self.lsCpuInfo[cores_per_socket])
+ else:
+ raise NotFoundError("GGBCPUINF0006E")
+ except IndexError, e:
+ self.log_error(e)
+ raise NotFoundError("GGBCPUINF0006E")
+
+ def get_threads_per_core(self):
+ """
+ param self: object of the class self
+ return: Thread(s) per core (information about the CPU architecture)
+ """
+ try:
+ threads_per_core = "Thread(s) per core"
+ if len(self.lsCpuInfo) > 0 and threads_per_core in self.lsCpuInfo.keys():
+ return int(self.lsCpuInfo[threads_per_core])
+ else:
+ raise NotFoundError("GGBCPUINF0007E")
+ except IndexError, e:
+ self.log_error(e)
+ raise NotFoundError("GGBCPUINF0007E")
diff --git a/src/wok/plugins/gingerbase/mockmodel.py b/src/wok/plugins/gingerbase/mockmodel.py
new file mode 100644
index 0000000..b92a24d
--- /dev/null
+++ b/src/wok/plugins/gingerbase/mockmodel.py
@@ -0,0 +1,298 @@
+#
+# Project Ginger Base
+#
+# Copyright IBM, Corp. 2015
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+import lxml.etree as ET
+import os
+import random
+import time
+
+from wok.objectstore import ObjectStore
+from wok.utils import add_task, wok_log
+
+import config
+from model import cpuinfo
+from model.debugreports import DebugReportsModel
+from model.model import Model
+
+
+fake_user = {'root': 'letmein!'}
+mockmodel_defaults = {'domain': 'test', 'arch': 'i686'}
+
+
+class MockModel(Model):
+
+ def __init__(self, objstore_loc=None):
+ # Override osinfo.defaults to ajust the values according to
+ # test:///default driver
+
+ self._mock_devices = MockDevices()
+ self._mock_partitions = MockPartitions()
+ self._mock_swupdate = MockSoftwareUpdate()
+ self._mock_repositories = MockRepositories()
+
+ cpuinfo.get_topo_capabilities = \
+ MockModel.get_topo_capabilities
+
+ super(MockModel, self).__init__(objstore_loc)
+ self.objstore_loc = objstore_loc
+ self.objstore = ObjectStore(objstore_loc)
+
+ # The MockModel methods are instantiated on runtime according to Model
+ # and BaseModel
+ # Because that a normal method override will not work here
+ # Instead of that we also need to do the override on runtime
+ for method in dir(self):
+ if method.startswith('_mock_'):
+ mock_method = getattr(self, method)
+ if not callable(mock_method):
+ continue
+
+ m = method[6:]
+ model_method = getattr(self, m)
+ setattr(self, '_model_' + m, model_method)
+ setattr(self, m, mock_method)
+
+ DebugReportsModel._gen_debugreport_file = self._gen_debugreport_file
+
+ def reset(self):
+ self._mock_swupdate = MockSoftwareUpdate()
+ self._mock_repositories = MockRepositories()
+
+ if hasattr(self, 'objstore'):
+ self.objstore = ObjectStore(self.objstore_loc)
+
+ @staticmethod
+ def get_topo_capabilities(conn):
+ # The libvirt test driver doesn't return topology.
+ xml = "<topology sockets='1' cores='2' threads='2'/>"
+ return ET.fromstring(xml)
+
+ def _gen_debugreport_file(self, name):
+ return add_task('/plugins/gingerbase/debugreports/%s' % name, self._create_log,
+ self.objstore, name)
+
+ def _create_log(self, cb, name):
+ path = config.get_debugreports_path()
+ tmpf = os.path.join(path, name + '.tmp')
+ realf = os.path.join(path, name + '.txt')
+ length = random.randint(1000, 10000)
+ with open(tmpf, 'w') as fd:
+ while length:
+ fd.write('I am logged')
+ length = length - 1
+ os.rename(tmpf, realf)
+ cb("OK", True)
+
+ def _mock_host_shutdown(self, *name):
+ wok_log.info("The host system will be shutted down")
+
+ def _mock_host_reboot(self, *name):
+ wok_log.info("The host system will be rebooted")
+
+ def _mock_partitions_get_list(self):
+ return self._mock_partitions.partitions.keys()
+
+ def _mock_partition_lookup(self, name):
+ return self._mock_partitions.partitions[name]
+
+ def _mock_packagesupdate_get_list(self):
+ return self._mock_swupdate.pkgs.keys()
+
+ def _mock_packageupdate_lookup(self, pkg_name):
+ return self._mock_swupdate.pkgs[pkg_name]
+
+ def _mock_host_swupdate(self, args=None):
+ task_id = add_task('/plugins/gingerbase/host/swupdate', self._mock_swupdate.doUpdate,
+ self.objstore)
+ return self.task_lookup(task_id)
+
+ def _mock_repositories_get_list(self):
+ return self._mock_repositories.repos.keys()
+
+ def _mock_repositories_create(self, params):
+ # Create a repo_id if not given by user. The repo_id will follow
+ # the format gingerbase_repo_<integer>, where integer is the number of
+ # seconds since the Epoch (January 1st, 1970), in UTC.
+ repo_id = params.get('repo_id', None)
+ if repo_id is None:
+ repo_id = "gingerbase_repo_%s" % str(int(time.time() * 1000))
+ params.update({'repo_id': repo_id})
+
+ config = params.get('config', {})
+ info = {'repo_id': repo_id,
+ 'baseurl': params['baseurl'],
+ 'enabled': True,
+ 'config': {'repo_name': config.get('repo_name', repo_id),
+ 'gpgkey': config.get('gpgkey', []),
+ 'gpgcheck': True,
+ 'mirrorlist': params.get('mirrorlist', '')}}
+ self._mock_repositories.repos[repo_id] = info
+ return repo_id
+
+ def _mock_repository_lookup(self, repo_id):
+ return self._mock_repositories.repos[repo_id]
+
+ def _mock_repository_delete(self, repo_id):
+ del self._mock_repositories.repos[repo_id]
+
+ def _mock_repository_enable(self, repo_id):
+ self._mock_repositories.repos[repo_id]['enabled'] = True
+
+ def _mock_repository_disable(self, repo_id):
+ self._mock_repositories.repos[repo_id]['enabled'] = False
+
+ def _mock_repository_update(self, repo_id, params):
+ self._mock_repositories.repos[repo_id].update(params)
+ return repo_id
+
+class MockPartitions(object):
+ def __init__(self):
+ self.partitions = {"vdx": {"available": True, "name": "vdx",
+ "fstype": "", "path": "/dev/vdx",
+ "mountpoint": "", "type": "disk",
+ "size": "2147483648"},
+ "vdz": {"available": True, "name": "vdz",
+ "fstype": "", "path": "/dev/vdz",
+ "mountpoint": "", "type": "disk",
+ "size": "2147483648"}}
+
+
+class MockDevices(object):
+ def __init__(self):
+ self.devices = {
+ 'computer': {'device_type': 'system',
+ 'firmware': {'release_date': '01/01/2012',
+ 'vendor': 'LENOVO',
+ 'version': 'XXXXX (X.XX )'},
+ 'hardware': {'serial': 'PXXXXX',
+ 'uuid':
+ '9d660370-820f-4241-8731-5a60c97e8aa6',
+ 'vendor': 'LENOVO',
+ 'version': 'ThinkPad T420'},
+ 'name': 'computer',
+ 'parent': None,
+ 'product': '4180XXX'},
+ 'pci_0000_03_00_0': {'bus': 3,
+ 'device_type': 'pci',
+ 'domain': 0,
+ 'driver': {'name': 'iwlwifi'},
+ 'function': 0,
+ 'iommuGroup': 7,
+ 'name': 'pci_0000_03_00_0',
+ 'parent': 'computer',
+ 'path':
+ '/sys/devices/pci0000:00/0000:03:00.0',
+ 'product': {
+ 'description':
+ 'Centrino Advanced-N 6205 [Taylor Peak]',
+ 'id': '0x0085'},
+ 'slot': 0,
+ 'vendor': {'description': 'Intel Corporation',
+ 'id': '0x8086'}},
+ 'pci_0000_0d_00_0': {'bus': 13,
+ 'device_type': 'pci',
+ 'domain': 0,
+ 'driver': {'name': 'sdhci-pci'},
+ 'function': 0,
+ 'iommuGroup': 7,
+ 'name': 'pci_0000_0d_00_0',
+ 'parent': 'computer',
+ 'path':
+ '/sys/devices/pci0000:00/0000:0d:00.0',
+ 'product': {'description':
+ 'PCIe SDXC/MMC Host Controller',
+ 'id': '0xe823'},
+ 'slot': 0,
+ 'vendor': {'description': 'Ricoh Co Ltd',
+ 'id': '0x1180'}},
+ 'scsi_host0': {'adapter': {'fabric_wwn': '37df6c1efa1b4388',
+ 'type': 'fc_host',
+ 'wwnn': 'efb6563f06434a98',
+ 'wwpn': '742f32073aab45d7'},
+ 'device_type': 'scsi_host',
+ 'host': 0,
+ 'name': 'scsi_host0',
+ 'parent': 'computer',
+ 'path': '/sys/devices/pci0000:00/0000:40:00.0/0'},
+ 'scsi_host1': {'adapter': {'fabric_wwn': '542efa5dced34123',
+ 'type': 'fc_host',
+ 'wwnn': 'b7433a40c9b84092',
+ 'wwpn': '25c1f485ae42497f'},
+ 'device_type': 'scsi_host',
+ 'host': 0,
+ 'name': 'scsi_host1',
+ 'parent': 'computer',
+ 'path': '/sys/devices/pci0000:00/0000:40:00.0/1'},
+ 'scsi_host2': {'adapter': {'fabric_wwn': '5c373c334c20478d',
+ 'type': 'fc_host',
+ 'wwnn': 'f2030bec4a254e6b',
+ 'wwpn': '07dbca4164d44096'},
+ 'device_type': 'scsi_host',
+ 'host': 0,
+ 'name': 'scsi_host2',
+ 'parent': 'computer',
+ 'path': '/sys/devices/pci0000:00/0000:40:00.0/2'}}
+
+
+class MockSoftwareUpdate(object):
+ def __init__(self):
+ self.pkgs = {
+ 'udevmountd': {'repository': 'openSUSE-13.1-Update',
+ 'version': '0.81.5-14.1',
+ 'arch': 'x86_64',
+ 'package_name': 'udevmountd'},
+ 'sysconfig-network': {'repository': 'openSUSE-13.1-Extras',
+ 'version': '0.81.5-14.1',
+ 'arch': 'x86_64',
+ 'package_name': 'sysconfig-network'},
+ 'libzypp': {'repository': 'openSUSE-13.1-Update',
+ 'version': '13.9.0-10.1',
+ 'arch': 'noarch',
+ 'package_name': 'libzypp'}}
+ self._num2update = 3
+
+ def doUpdate(self, cb, params):
+ msgs = []
+ for pkg in self.pkgs.keys():
+ msgs.append("Updating package %s" % pkg)
+ cb('\n'.join(msgs))
+ time.sleep(1)
+
+ time.sleep(2)
+ msgs.append("All packages updated")
+ cb('\n'.join(msgs), True)
+
+ # After updating all packages any package should be listed to be
+ # updated, so reset self._packages
+ self.pkgs = {}
+
+
+class MockRepositories(object):
+ def __init__(self):
+ self.repos = {"gingerbase_repo_1392167832":
+ {"repo_id": "gingerbase_repo_1392167832",
+ "enabled": True,
+ "baseurl": "http://www.fedora.org",
+ "config": {"repo_name": "gingerbase_repo_1392167832",
+ "gpgkey": [],
+ "gpgcheck": True,
+ "mirrorlist": ""}}}
+
+
+
--
2.1.0
More information about the Kimchi-devel
mailing list