[node-devel] oVirt Node ISO for oVirt 3.3 - Draft image for testing
Laercio Motta
laerciomasala at gmail.com
Mon Jan 20 15:49:05 UTC 2014
No problem.
But I believe this is because the file already has something.
Or he's duplicating information. As you can see in the file I sent, the MAC
of NIC and eth1 eth6 are the same ..
Well, we stayed anyway: P
2014/1/20 Fabian Deutsch <fabiand at redhat.com>
> Am Montag, den 20.01.2014, 13:10 -0200 schrieb Laercio Motta:
> > Understand?? o.0
>
> Hey Laercio,
>
> sorry for the delay.
> I think I do understand the problem: The NIC order is different the
> previously, right?
>
> When you configure a NIC you cna use the <Flash NIC to identify> button
> to identify a special NIC.
>
> We won't change this on el6 - but the Feora based Node should be using
> predictable network names, which is addressing this issue.
>
> - fabian
>
> >
> >
> > 2014/1/17 Laercio Motta <laerciomasala at gmail.com>
> > Hi,
> >
> >
> > > Could you explain this a bit more?
> > > Did all NICs appear, or did to many NICs appear?
> >
> >
> > I'm used to udev leave my NIC in sequence.
> > And in this case it got messed up:
> > common:
> > eth0 -> port 1
> > eth1 -> port 2
> > ethx >> port X
> >
> > What happened:
> > eth0 -> port 1
> > eth4 -> port 3
> > eth5 -> port 4
> > eth6 -> port 2
> >
> > As follows attached file ..
> >
> > Not a big problem .. But it confused me a little time to
> > configure the network of 'nodes' ... Had to use tcpdump
> > (thankfully that was available) to find out which interface
> > belonged to what port Switch for CDP: P
> >
> >
> >
> >
> > 2014/1/17 Fabian Deutsch <fabiand at redhat.com>
> > Hi Laercio,
> >
> > Am Freitag, den 17.01.2014, 14:49 -0200 schrieb
> > Laercio Motta:
> >
> > > I tested the ISO here.
> >
> >
> > Thanks for being that brave! ;)
> >
> > > - I was able to register with the engine and aprove
> > (thing with
> > > 'oVirt-node-3.0.1-iso-1.0.2.vdsm.el6.iso' version
> > was not possible)
> >
> >
> > Great that this works now.
> >
> > > - Firewall: Being duplicated the rule of vdsm port
> > (54321).
> > > - 'Sanlock' is being blocked by 'selinux' (audit.log
> > attached)
> >
> >
> > Okay, those are probably bugs we need to take care of.
> >
> > > - NIC was messy .. :P (eth0, eth4, eth5, eth6... )..
> >
> >
> > Could you explain this a bit more?
> > Did all NICs appear, or did to many NICs appear?
> >
> > Thanks
> > fabian
> >
> > >
> > >
> > >
> > > 2014/1/17 Fabian Deutsch <fabiand at redhat.com>
> > > Hey,
> > >
> > > as many of you have noticed there wasn't any
> > well working
> > > oVirt Node ISO
> > > around for oVirt 3.3.
> > > To get this ball rolling again I've put
> > together a draft image
> > > of ALPHA
> > > quality. It contains many fixes some of us
> > have been working
> > > on over the
> > > last weeks.
> > >
> > > - Source & ISO -
> > > To not drown Jenkins in a
> > hell-of-a-patch-queue I've pushed
> > > the patches to
> > >
> > >
> > https://github.com/fabiand/ovirt-node/tree/teamsync
> > >
> > > The ISO built from that patchset can be
> > found here:
> > >
> > >
> >
> http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.3-0.999.201401170926draft.vdsm.el6.iso
> > >
> > > Please test this draft image and provide
> > feedback on how it
> > > works for
> > > you.
> > > If you encounter problems - and you probably
> > will - please
> > > take a look
> > > here on how to debug them:
> > >
> > > http://www.ovirt.org/Node_Troubleshooting
> > >
> > > - Important Notes -
> > > SELinux: Boot this alpha image with
> > enforcing=0 to log
> > > potential
> > > denials, but not block the calls. To fix
> > those denials
> > > permanently
> > > please attach your /var/log/audit/audit.log
> > to a bug in
> > > bugzilla.
> > >
> > > Known problems:
> > > - Exception is raised after registration to
> > Engine
> > > - Many bond devices are show on network page
> > > - Denials appear in /var/log/audit/audit.log
> > >
> > >
> > > And don't hesitate to reach out to us if you
> > want to get more
> > > involved
> > > with Node.
> > >
> > > - fabian
> > >
> > >
> > >
> > > --
> > > ╔══════════════════════════════════════════════╗
> > > ║▒▒▒▒▒▒▒▒▒▒▒ Laercio da Silva Motta ▒▒▒▒▒▒▒▒▒▒▒║
> > > ║----------------------------------------------║
> > > ║ Blog: http://www.laerciomotta.com/ ║
> > > ║ Twitter: http://twitter.com/#!/laerciomasala ║
> > > ║ Skype: laerciomasala ║
> > > ║ Chave PGP: http://bit.ly/kXS6ga ║
> > > ╚═════════════════════════════════════════v1.0═╝
> >
> >
> >
> >
> >
> > --
> > ╔══════════════════════════════════════════════╗
> > ║▒▒▒▒▒▒▒▒▒▒▒ Laercio da Silva Motta ▒▒▒▒▒▒▒▒▒▒▒║
> > ║----------------------------------------------║
> > ║ Blog: http://www.laerciomotta.com/ ║
> > ║ Twitter: http://twitter.com/#!/laerciomasala ║
> > ║ Skype: laerciomasala ║
> > ║ Chave PGP: http://bit.ly/kXS6ga ║
> > ╚═════════════════════════════════════════v1.0═╝
> >
> >
> >
> > --
> > ╔══════════════════════════════════════════════╗
> > ║▒▒▒▒▒▒▒▒▒▒▒ Laercio da Silva Motta ▒▒▒▒▒▒▒▒▒▒▒║
> > ║----------------------------------------------║
> > ║ Blog: http://www.laerciomotta.com/ ║
> > ║ Twitter: http://twitter.com/#!/laerciomasala ║
> > ║ Skype: laerciomasala ║
> > ║ Chave PGP: http://bit.ly/kXS6ga ║
> > ╚═════════════════════════════════════════v1.0═╝
>
>
--
╔══════════════════════════════════════════════╗
║▒▒▒▒▒▒▒▒▒▒▒ Laercio da Silva Motta ▒▒▒▒▒▒▒▒▒▒▒║
║----------------------------------------------║
║* Blog: *http://www.laerciomotta.com/ ║
║ *Twitter:* http://twitter.com/#!/laerciomasala ║
║ *Skype*: laerciomasala ║
║ Chave PGP: http://bit.ly/kXS6ga ║
╚═════════════════════════════════════════v1.0═╝
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/node-devel/attachments/20140120/96383798/attachment.html>
More information about the node-devel
mailing list