[node-patches] Change in ovirt-node[puppet-ovirt-node-plugin]: Initial push of puppet plugin code to ovirt repo
rbarry at redhat.com
rbarry at redhat.com
Sat May 11 00:08:43 UTC 2013
Ryan Barry has uploaded a new change for review.
Change subject: Initial push of puppet plugin code to ovirt repo
......................................................................
Initial push of puppet plugin code to ovirt repo
Cleanup to follow on Mondy
Change-Id: Icb639acf019a48e809fb983ab2124c6215c00157
Signed-off-by: Ryan Barry <rbarry at redhat.com>
---
A plugins/puppet/COPYING
A plugins/puppet/Makefile.am
A plugins/puppet/README.md
A plugins/puppet/autogen.sh
A plugins/puppet/build/COPYING
A plugins/puppet/build/Makefile.am
A plugins/puppet/build/README.md
A plugins/puppet/build/autogen.sh
A plugins/puppet/build/build/autogen.sh
A plugins/puppet/build/configure.ac
A plugins/puppet/build/provider/Makefile.am
A plugins/puppet/build/provider/ovirt_provider.rb
A plugins/puppet/build/puppet-ovirt-node-plugin-0.0.1.tar.gz
A plugins/puppet/build/puppet-ovirt-node-plugin.spec
A plugins/puppet/build/puppet-ovirt-node-plugin.spec.in
A plugins/puppet/build/recipe/Makefile.am
A plugins/puppet/build/recipe/puppet-plugin-iso.ks
A plugins/puppet/build/recipe/puppet-plugin-minimizer.ks
A plugins/puppet/build/src/Makefile.am
A plugins/puppet/build/src/ovirt.rb
A plugins/puppet/build/src/puppet_page.py
A plugins/puppet/configure.ac
A plugins/puppet/provider/Makefile.am
A plugins/puppet/provider/lib/ovirt_node.rb
A plugins/puppet/provider/type/.ovirt_node.rb.swp
A plugins/puppet/provider/type/ovirt_node.rb
A plugins/puppet/puppet-ovirt-node-plugin.spec.in
A plugins/puppet/recipe/Makefile.am
A plugins/puppet/recipe/puppet-plugin-iso.ks
A plugins/puppet/recipe/puppet-plugin-minimizer.ks
A plugins/puppet/src/Makefile.am
A plugins/puppet/src/ovirt.rb
A plugins/puppet/src/puppet_page.py
33 files changed, 2,405 insertions(+), 0 deletions(-)
git pull ssh://gerrit.ovirt.org:29418/ovirt-node refs/changes/64/14664/1
diff --git a/plugins/puppet/COPYING b/plugins/puppet/COPYING
new file mode 100644
index 0000000..623b625
--- /dev/null
+++ b/plugins/puppet/COPYING
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/plugins/puppet/Makefile.am b/plugins/puppet/Makefile.am
new file mode 100644
index 0000000..3ea5158
--- /dev/null
+++ b/plugins/puppet/Makefile.am
@@ -0,0 +1,104 @@
+# Copyright (C) 2008 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301, USA. A copy of the GNU General Public License is
+# also available at http://www.gnu.org/copyleft/gpl.html.
+
+OVIRT_CACHE_DIR ?= $(HOME)/ovirt-cache
+
+PYTHONSOURCES = \
+ $(shell find scripts -name \*.py)
+
+SHELL := /bin/bash
+
+
+SUBDIRS = \
+ src \
+ recipe
+
+EXTRA_DIST = \
+ puppet-ovirt-node-plugin.spec \
+ puppet-ovirt-node-plugin.spec.in
+
+DISTCLEANFILES = $(PACKAGE)-$(VERSION).tar.gz \
+ aclocal.m4 \
+ configure \
+ install-sh \
+ missing \
+ py-compile
+
+DISTCLEANDIRS = autom4te.cache
+
+rpms: dist
+ rpmbuild $(RPM_FLAGS) -ta $(distdir).tar.gz
+
+srpms: dist
+ rpmbuild $(RPM_FLAGS) -ts $(distdir).tar.gz
+
+publish: rpms
+ mkdir -p $(OVIRT_CACHE_DIR)
+ rsync -aq $(shell rpm --eval '%{_rpmdir}')/ $(OVIRT_CACHE_DIR)/ovirt/
+ rsync -aq $(shell rpm --eval '%{_srcrpmdir}')/ $(OVIRT_CACHE_DIR)/ovirt/src
+ createrepo $(OVIRT_CACHE_DIR)/ovirt
+
+iso: publish
+ cd recipe
+ make node
+
+.PHONY: rpms publish srpms
+
+
+check-local: doctests pep8 pyflakes pylint
+ @echo -e "---\n Passed.\n---"
+
+check-local-fast:
+ @for M in $(PYTHONSOURCES); \
+ do \
+ export PARENT=$$$$ ; \
+ echo "Fast checks on '$$M'"; \
+ PYTHONPATH=. python -m doctest $$M || kill $$PARENT & \
+ PYTHONPATH=. pep8 -r $$M || kill $$PARENT & \
+ PYTHONPATH=. pyflakes $$M || kill $$PARENT & \
+ done ; wait
+
+doctests:
+ @for M in $(PYTHONSOURCES); \
+ do \
+ echo Doctest on "$$M"; \
+ PYTHONPATH=. python -m doctest $$M || exit 1; \
+ done
+
+pep8:
+ @for M in $(PYTHONSOURCES); \
+ do \
+ echo pep8 on "$$M"; \
+ PYTHONPATH=. pep8 -r $$M || exit 1; \
+ done
+
+PYLINT=pylint -f parseable --include-ids=yes --rcfile=.pylintrc
+pylint:
+ @for M in $(PYTHONSOURCES); \
+ do \
+ echo pylint on "$$M"; \
+ PYTHONPATH=. $(PYLINT) $$M || exit 1; \
+ done
+
+pyflakes:
+ @for M in $(PYTHONSOURCES); \
+ do \
+ echo pyflakes on "$$M"; \
+ PYTHONPATH=. pyflakes $$M || exit 1; \
+ done
+
+# vim: ts=2
diff --git a/plugins/puppet/README.md b/plugins/puppet/README.md
new file mode 100644
index 0000000..d58edb3
--- /dev/null
+++ b/plugins/puppet/README.md
@@ -0,0 +1,4 @@
+puppet-ovirt-node-plugin
+========================
+
+./autogen.sh && make rpms
diff --git a/plugins/puppet/autogen.sh b/plugins/puppet/autogen.sh
new file mode 100755
index 0000000..03ca10b
--- /dev/null
+++ b/plugins/puppet/autogen.sh
@@ -0,0 +1,66 @@
+#!/bin/sh
+# Run this to generate configure and Makefile
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+THEDIR=`pwd`
+(
+ cd $srcdir
+ die=0
+
+ (autoconf --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have autoconf installed."
+ echo "Download the appropriate package for your distribution,"
+ echo "or see http://www.gnu.org/software/autoconf"
+ die=1
+ }
+
+ # Require libtool only if one of of LT_INIT,
+ # AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac.
+ grep -E '^[[:blank:]]*(LT_INIT|A[CM]_PROG_LIBTOOL)' configure.ac >/dev/null \
+ && {
+ (libtool --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have libtool installed."
+ echo "Download the appropriate package for your distribution,"
+ echo "or see http://www.gnu.org/software/libtool"
+ die=1
+ }
+ }
+
+ (automake --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ die=1
+ echo "You must have automake installed."
+ echo "Download the appropriate package for your distribution,"
+ echo "or see http://www.gnu.org/software/automake"
+ }
+
+ test $die = 1 && exit 1
+
+ test -f puppet-ovirt-node-plugin.spec.in || {
+ echo "You must run this script in the top-level directory"
+ exit 1
+ }
+
+ if test -z "$*"; then
+ echo "I am going to run ./configure with no arguments - if you wish "
+ echo "to pass any to it, please specify them on the $0 command line."
+ fi
+
+ aclocal
+
+ # Run autoheader only if needed
+ grep '^[[:blank:]]*AC_CONFIG_HEADERS' configure.ac >/dev/null && autoheader
+
+ automake --add-missing
+ autoconf
+ ./configure "$@"
+)
+
+if test "x$OBJ_DIR" != x; then
+ mkdir -p "$OBJ_DIR"
+ cd "$OBJ_DIR"
+fi
diff --git a/plugins/puppet/build/COPYING b/plugins/puppet/build/COPYING
new file mode 100644
index 0000000..623b625
--- /dev/null
+++ b/plugins/puppet/build/COPYING
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/plugins/puppet/build/Makefile.am b/plugins/puppet/build/Makefile.am
new file mode 100644
index 0000000..3ea5158
--- /dev/null
+++ b/plugins/puppet/build/Makefile.am
@@ -0,0 +1,104 @@
+# Copyright (C) 2008 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301, USA. A copy of the GNU General Public License is
+# also available at http://www.gnu.org/copyleft/gpl.html.
+
+OVIRT_CACHE_DIR ?= $(HOME)/ovirt-cache
+
+PYTHONSOURCES = \
+ $(shell find scripts -name \*.py)
+
+SHELL := /bin/bash
+
+
+SUBDIRS = \
+ src \
+ recipe
+
+EXTRA_DIST = \
+ puppet-ovirt-node-plugin.spec \
+ puppet-ovirt-node-plugin.spec.in
+
+DISTCLEANFILES = $(PACKAGE)-$(VERSION).tar.gz \
+ aclocal.m4 \
+ configure \
+ install-sh \
+ missing \
+ py-compile
+
+DISTCLEANDIRS = autom4te.cache
+
+rpms: dist
+ rpmbuild $(RPM_FLAGS) -ta $(distdir).tar.gz
+
+srpms: dist
+ rpmbuild $(RPM_FLAGS) -ts $(distdir).tar.gz
+
+publish: rpms
+ mkdir -p $(OVIRT_CACHE_DIR)
+ rsync -aq $(shell rpm --eval '%{_rpmdir}')/ $(OVIRT_CACHE_DIR)/ovirt/
+ rsync -aq $(shell rpm --eval '%{_srcrpmdir}')/ $(OVIRT_CACHE_DIR)/ovirt/src
+ createrepo $(OVIRT_CACHE_DIR)/ovirt
+
+iso: publish
+ cd recipe
+ make node
+
+.PHONY: rpms publish srpms
+
+
+check-local: doctests pep8 pyflakes pylint
+ @echo -e "---\n Passed.\n---"
+
+check-local-fast:
+ @for M in $(PYTHONSOURCES); \
+ do \
+ export PARENT=$$$$ ; \
+ echo "Fast checks on '$$M'"; \
+ PYTHONPATH=. python -m doctest $$M || kill $$PARENT & \
+ PYTHONPATH=. pep8 -r $$M || kill $$PARENT & \
+ PYTHONPATH=. pyflakes $$M || kill $$PARENT & \
+ done ; wait
+
+doctests:
+ @for M in $(PYTHONSOURCES); \
+ do \
+ echo Doctest on "$$M"; \
+ PYTHONPATH=. python -m doctest $$M || exit 1; \
+ done
+
+pep8:
+ @for M in $(PYTHONSOURCES); \
+ do \
+ echo pep8 on "$$M"; \
+ PYTHONPATH=. pep8 -r $$M || exit 1; \
+ done
+
+PYLINT=pylint -f parseable --include-ids=yes --rcfile=.pylintrc
+pylint:
+ @for M in $(PYTHONSOURCES); \
+ do \
+ echo pylint on "$$M"; \
+ PYTHONPATH=. $(PYLINT) $$M || exit 1; \
+ done
+
+pyflakes:
+ @for M in $(PYTHONSOURCES); \
+ do \
+ echo pyflakes on "$$M"; \
+ PYTHONPATH=. pyflakes $$M || exit 1; \
+ done
+
+# vim: ts=2
diff --git a/plugins/puppet/build/README.md b/plugins/puppet/build/README.md
new file mode 100644
index 0000000..d58edb3
--- /dev/null
+++ b/plugins/puppet/build/README.md
@@ -0,0 +1,4 @@
+puppet-ovirt-node-plugin
+========================
+
+./autogen.sh && make rpms
diff --git a/plugins/puppet/build/autogen.sh b/plugins/puppet/build/autogen.sh
new file mode 100755
index 0000000..03ca10b
--- /dev/null
+++ b/plugins/puppet/build/autogen.sh
@@ -0,0 +1,66 @@
+#!/bin/sh
+# Run this to generate configure and Makefile
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+THEDIR=`pwd`
+(
+ cd $srcdir
+ die=0
+
+ (autoconf --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have autoconf installed."
+ echo "Download the appropriate package for your distribution,"
+ echo "or see http://www.gnu.org/software/autoconf"
+ die=1
+ }
+
+ # Require libtool only if one of of LT_INIT,
+ # AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac.
+ grep -E '^[[:blank:]]*(LT_INIT|A[CM]_PROG_LIBTOOL)' configure.ac >/dev/null \
+ && {
+ (libtool --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have libtool installed."
+ echo "Download the appropriate package for your distribution,"
+ echo "or see http://www.gnu.org/software/libtool"
+ die=1
+ }
+ }
+
+ (automake --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ die=1
+ echo "You must have automake installed."
+ echo "Download the appropriate package for your distribution,"
+ echo "or see http://www.gnu.org/software/automake"
+ }
+
+ test $die = 1 && exit 1
+
+ test -f puppet-ovirt-node-plugin.spec.in || {
+ echo "You must run this script in the top-level directory"
+ exit 1
+ }
+
+ if test -z "$*"; then
+ echo "I am going to run ./configure with no arguments - if you wish "
+ echo "to pass any to it, please specify them on the $0 command line."
+ fi
+
+ aclocal
+
+ # Run autoheader only if needed
+ grep '^[[:blank:]]*AC_CONFIG_HEADERS' configure.ac >/dev/null && autoheader
+
+ automake --add-missing
+ autoconf
+ ./configure "$@"
+)
+
+if test "x$OBJ_DIR" != x; then
+ mkdir -p "$OBJ_DIR"
+ cd "$OBJ_DIR"
+fi
diff --git a/plugins/puppet/build/build/autogen.sh b/plugins/puppet/build/build/autogen.sh
new file mode 100755
index 0000000..03ca10b
--- /dev/null
+++ b/plugins/puppet/build/build/autogen.sh
@@ -0,0 +1,66 @@
+#!/bin/sh
+# Run this to generate configure and Makefile
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+THEDIR=`pwd`
+(
+ cd $srcdir
+ die=0
+
+ (autoconf --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have autoconf installed."
+ echo "Download the appropriate package for your distribution,"
+ echo "or see http://www.gnu.org/software/autoconf"
+ die=1
+ }
+
+ # Require libtool only if one of of LT_INIT,
+ # AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac.
+ grep -E '^[[:blank:]]*(LT_INIT|A[CM]_PROG_LIBTOOL)' configure.ac >/dev/null \
+ && {
+ (libtool --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have libtool installed."
+ echo "Download the appropriate package for your distribution,"
+ echo "or see http://www.gnu.org/software/libtool"
+ die=1
+ }
+ }
+
+ (automake --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ die=1
+ echo "You must have automake installed."
+ echo "Download the appropriate package for your distribution,"
+ echo "or see http://www.gnu.org/software/automake"
+ }
+
+ test $die = 1 && exit 1
+
+ test -f puppet-ovirt-node-plugin.spec.in || {
+ echo "You must run this script in the top-level directory"
+ exit 1
+ }
+
+ if test -z "$*"; then
+ echo "I am going to run ./configure with no arguments - if you wish "
+ echo "to pass any to it, please specify them on the $0 command line."
+ fi
+
+ aclocal
+
+ # Run autoheader only if needed
+ grep '^[[:blank:]]*AC_CONFIG_HEADERS' configure.ac >/dev/null && autoheader
+
+ automake --add-missing
+ autoconf
+ ./configure "$@"
+)
+
+if test "x$OBJ_DIR" != x; then
+ mkdir -p "$OBJ_DIR"
+ cd "$OBJ_DIR"
+fi
diff --git a/plugins/puppet/build/configure.ac b/plugins/puppet/build/configure.ac
new file mode 100644
index 0000000..f408efb
--- /dev/null
+++ b/plugins/puppet/build/configure.ac
@@ -0,0 +1,10 @@
+AC_INIT([puppet-ovirt-node-plugin], [0.0.1], [node-devel at ovirt.org])
+AM_INIT_AUTOMAKE([-Wall -Werror foreign -Wno-portability tar-pax])
+
+AM_PATH_PYTHON
+
+AC_CONFIG_FILES([Makefile
+ src/Makefile
+ recipe/Makefile
+ puppet-ovirt-node-plugin.spec])
+AC_OUTPUT
diff --git a/plugins/puppet/build/provider/Makefile.am b/plugins/puppet/build/provider/Makefile.am
new file mode 100644
index 0000000..0d2886c
--- /dev/null
+++ b/plugins/puppet/build/provider/Makefile.am
@@ -0,0 +1,25 @@
+# Copyright (C) 2010, Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301, USA. A copy of the GNU General Public License is
+# also available at http://www.gnu.org/copyleft/gpl.html.
+
+EXTRA_DIST = \
+ *.rb
+
+OVIRT_NODE_RECIPEdir = $(datadir)/ovirt-node-recipe
+OVIRT_NODE_RECIPE_DATA = \
+ puppet-plugin-minimizer.ks \
+ puppet-plugin-iso.ks
+
diff --git a/plugins/puppet/build/provider/ovirt_provider.rb b/plugins/puppet/build/provider/ovirt_provider.rb
new file mode 100644
index 0000000..bde172e
--- /dev/null
+++ b/plugins/puppet/build/provider/ovirt_provider.rb
@@ -0,0 +1,5 @@
+Puppet::Type.newtype(:ovirt_engine) do
+ newparam(:address, :namevar => true) do
+
+ end
+end
diff --git a/plugins/puppet/build/puppet-ovirt-node-plugin-0.0.1.tar.gz b/plugins/puppet/build/puppet-ovirt-node-plugin-0.0.1.tar.gz
new file mode 100644
index 0000000..6bf9724
--- /dev/null
+++ b/plugins/puppet/build/puppet-ovirt-node-plugin-0.0.1.tar.gz
Binary files differ
diff --git a/plugins/puppet/build/puppet-ovirt-node-plugin.spec b/plugins/puppet/build/puppet-ovirt-node-plugin.spec
new file mode 100644
index 0000000..103b68b
--- /dev/null
+++ b/plugins/puppet/build/puppet-ovirt-node-plugin.spec
@@ -0,0 +1,191 @@
+Summary: A plugin to make oVirt Node installs compatible with Puppet
+Name: puppet-ovirt-node-plugin
+Version: 0.0.1
+Release: 0%{?BUILD_NUMBER}%{?extra_release}%{?dist}
+Source0: %{name}-%{version}.tar.gz
+License: GPLv2+
+Group: Applications/System
+
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot
+URL: http://www.ovirt.org/
+BuildRequires: automake autoconf
+Requires: ovirt-node >= 2.6.0
+Requires: puppet
+
+BuildArch: noarch
+
+%define app_root %{_datadir}/%{name}
+%define recipe_root %{_datadir}/ovirt-node-recipe
+
+%description
+Provides UI and associated scripts for integrating oVirt Node and Puppet
+
+%package recipe
+Summary: Kickstarts for building oVirt Node isos including %{name}
+Group: Applications/System
+Requires: ovirt-node-recipe >= 2.6.0
+
+%description recipe
+Provides kickstart files for generating an oVirt Node ISO image containing
+%{name}.
+
+%prep
+%setup -q
+
+
+%build
+aclocal && autoheader && automake --add-missing && autoconf
+
+
+%configure
+make
+
+
+%install
+%{__rm} -rf %{buildroot}
+make install DESTDIR=%{buildroot}
+
+
+%clean
+%{__rm} -rf %{buildroot}
+
+
+%post -p /bin/bash
+cd /usr/share/ruby/vendor_ruby/facter
+patch -p0 << EOF
+--- operatingsystem.rb 2013-03-19 16:12:46.610079038 -0700
++++ operatingsystemnew.rb 2013-03-21 11:51:59.199657472 -0700
+@@ -10,6 +10,9 @@
+ #
+ # Caveats:
+ #
++#
++\$LOAD_PATH.unshift('/var/lib/puppet/facts')
++require 'ovirt.rb'
+
+ Facter.add(:operatingsystem) do
+ confine :kernel => :sunos
+@@ -25,7 +28,12 @@
+ Facter.add(:operatingsystem) do
+ confine :kernel => :linux
+ setcode do
+- if Facter.value(:lsbdistid) == "Ubuntu"
++ if FileTest.exists?("/etc/default/version")
++ txt = File.read("/etc/default/version")
++ if txt =~ /^PRODUCT='(.*?)\s/
++ $1
++ end
++ elsif Facter.value(:lsbdistid) == "Ubuntu"
+ "Ubuntu"
+ elsif FileTest.exists?("/etc/debian_version")
+ "Debian"
+EOF
+
+cd /etc/puppet
+patch -p0 << EOF
+--- puppet.conf 2013-03-21 14:55:43.969130799 -0700
++++ puppet.conf.new 2013-03-21 14:56:02.690178578 -0700
+@@ -1,4 +1,6 @@
+ [main]
++ server = ""
++ certname = ""
+ # The Puppet log directory.
+ # The default value is '$vardir/log'.
+ logdir = /var/log/puppet
+EOF
+
+cd /usr/libexec
+patch -p0 << EOF
+--- ovirt-init-functions.sh 2013-03-21 15:30:13.078014954 -0700
++++ ovirt-init-functions-new.sh 2013-03-21 16:33:52.893135359 -0700
+@@ -223,6 +223,9 @@
+ # rhn_proxyuser=PROXY-USERNAME
+ # rhn_proxypassword=PROXY-PASSWORD
+ # snmp_password=<authpassphrase>
++ # puppet_enabled=<y|n>
++ # puppet_server=server
++ # puppet_cetname=<certname>
+
+ # BOOTIF=link|eth*|<MAC> (appended by pxelinux)
+ # network boot interface is assumed to be on management network where
+@@ -329,6 +332,14 @@
+ cim_passwd=
+ cim_enabled=
+
++ # Puppet related options
++ # puppet_enabled=y|n
++ # puppet_server=server
++ # puppet_certname=<certname>
++ puppet_enabled=
++ puppet_server=
++ puppet_certame=
++
+ # pxelinux format: ip=<client-ip>:<boot-server-ip>:<gw-ip>:<netmask>
+ # anaconda format: ip=<client-ip> netmask=<netmask> gateway=<gw-ip>
+ # or ip=dhcp|off
+@@ -613,6 +624,19 @@
+ snmp_password=${i#snmp_password=}
+ ;;
+
++ puppet_enabled=n | puppet_enabled=0)
++ puppet_enabled=0
++ ;;
++ puppet_enabled* | puppet_enabled=y | puppet_enabled=1)
++ puppet_enabled=1
++ ;;
++ puppet_server=*)
++ puppet_server=${i#puppet_server=}
++ ;;
++ puppet_certname=*)
++ puppet_certname=${i#puppet_certname=}
++ ;;
++
+ mem_overcommit* | ovirt_overcommit*)
+ i=${i#mem_overcommit=}
+ i=${i#ovirt_overcommit=}
+@@ -797,7 +821,7 @@
+
+
+ # save boot parameters as defaults for ovirt-config-*
+- params="bootif init init_app vol_boot_size vol_efi_size vol_swap_size vol_root_size vol_config_size vol_logging_size vol_data_size vol_swap2_size vol_data2_size crypt_swap crypt_swap2 upgrade standalone overcommit ip_address ip_netmask ip_gateway ipv6 dns ntp vlan ssh_pwauth syslog_server syslog_port collectd_server collectd_port bootparams hostname firstboot rhn_type rhn_url rhn_ca_cert rhn_username rhn_password rhn_profile rhn_activationkey rhn_org rhn_proxy rhn_proxyuser rhn_proxypassword runtime_mode kdump_nfs iscsi_name snmp_password install netconsole_server netconsole_port stateless cim_enabled wipe_fakeraid iscsi_init iscsi_target_name iscsi_target_host iscsi_target_port iscsi_install"
++ params="bootif init init_app vol_boot_size vol_efi_size vol_swap_size vol_root_size vol_config_size vol_logging_size vol_data_size vol_swap2_size vol_data2_size crypt_swap crypt_swap2 upgrade standalone overcommit ip_address ip_netmask ip_gateway ipv6 dns ntp vlan ssh_pwauth syslog_server syslog_port collectd_server collectd_port bootparams hostname firstboot rhn_type rhn_url rhn_ca_cert rhn_username rhn_password rhn_profile rhn_activationkey rhn_org rhn_proxy rhn_proxyuser rhn_proxypassword runtime_mode kdump_nfs iscsi_name snmp_password install netconsole_server netconsole_port stateless cim_enabled wipe_fakeraid iscsi_init iscsi_target_name iscsi_target_host iscsi_target_port iscsi_install puppet_enabled puppet_server puppet_certname"
+ # mount /config unless firstboot is forced
+ if [ "$firstboot" != "1" ]; then
+ mount_config
+@@ -855,6 +879,13 @@
+ /usr/sbin/usermod -p "$rootpw" root
+ chage -d 0 root
+ fi
++ if [ "$puppet_enabled" = 1]; then
++ if [ `hostname` != "localhost" ] | [ -n $puppet_certname ]; then
++ python -c "from ovirt.node.setup.puppet_page import *; ActivatePuppet()"
++ else
++ log "Puppet disabled. Hostname not set and puppet_certname not specified"
++ fi
++ fi
+ # check if root or admin password is expired, this might be upon reboot
+ # in case of automated installed with rootpw or adminpw parameter!
+ if LC_ALL=C chage -l root | grep -q "password must be changed" \
+@@ -1373,8 +1404,6 @@
+ return $?
+ }
+
+-
+-
+ #
+ # If called with a param from .service file:
+ #
+EOF
+
+%preun
+
+%files recipe
+%{recipe_root}
+
+%files
+%{python_sitelib}/ovirt/node/setup/puppet_page.py*
+%{_localstatedir}/lib/puppet/facts/ovirt.rb
+
+%changelog
+* Fri Mar 22 2013 Ryan Barry <rbarry at redhat.com> 0.0.1
+- initial commit
diff --git a/plugins/puppet/build/puppet-ovirt-node-plugin.spec.in b/plugins/puppet/build/puppet-ovirt-node-plugin.spec.in
new file mode 100644
index 0000000..7b4999a
--- /dev/null
+++ b/plugins/puppet/build/puppet-ovirt-node-plugin.spec.in
@@ -0,0 +1,191 @@
+Summary: A plugin to make oVirt Node installs compatible with Puppet
+Name: puppet-ovirt-node-plugin
+Version: @VERSION@
+Release: 0%{?BUILD_NUMBER}%{?extra_release}%{?dist}
+Source0: %{name}-%{version}.tar.gz
+License: GPLv2+
+Group: Applications/System
+
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot
+URL: http://www.ovirt.org/
+BuildRequires: automake autoconf
+Requires: ovirt-node >= 2.6.0
+Requires: puppet
+
+BuildArch: noarch
+
+%define app_root %{_datadir}/%{name}
+%define recipe_root %{_datadir}/ovirt-node-recipe
+
+%description
+Provides UI and associated scripts for integrating oVirt Node and Puppet
+
+%package recipe
+Summary: Kickstarts for building oVirt Node isos including %{name}
+Group: Applications/System
+Requires: ovirt-node-recipe >= 2.6.0
+
+%description recipe
+Provides kickstart files for generating an oVirt Node ISO image containing
+%{name}.
+
+%prep
+%setup -q
+
+
+%build
+aclocal && autoheader && automake --add-missing && autoconf
+
+
+%configure
+make
+
+
+%install
+%{__rm} -rf %{buildroot}
+make install DESTDIR=%{buildroot}
+
+
+%clean
+%{__rm} -rf %{buildroot}
+
+
+%post -p /bin/bash
+cd /usr/share/ruby/vendor_ruby/facter
+patch -p0 << EOF
+--- operatingsystem.rb 2013-03-19 16:12:46.610079038 -0700
++++ operatingsystemnew.rb 2013-03-21 11:51:59.199657472 -0700
+@@ -10,6 +10,9 @@
+ #
+ # Caveats:
+ #
++#
++\$LOAD_PATH.unshift('/var/lib/puppet/facts')
++require 'ovirt.rb'
+
+ Facter.add(:operatingsystem) do
+ confine :kernel => :sunos
+@@ -25,7 +28,12 @@
+ Facter.add(:operatingsystem) do
+ confine :kernel => :linux
+ setcode do
+- if Facter.value(:lsbdistid) == "Ubuntu"
++ if FileTest.exists?("/etc/default/version")
++ txt = File.read("/etc/default/version")
++ if txt =~ /^PRODUCT='(.*?)\s/
++ $1
++ end
++ elsif Facter.value(:lsbdistid) == "Ubuntu"
+ "Ubuntu"
+ elsif FileTest.exists?("/etc/debian_version")
+ "Debian"
+EOF
+
+cd /etc/puppet
+patch -p0 << EOF
+--- puppet.conf 2013-03-21 14:55:43.969130799 -0700
++++ puppet.conf.new 2013-03-21 14:56:02.690178578 -0700
+@@ -1,4 +1,6 @@
+ [main]
++ server = ""
++ certname = ""
+ # The Puppet log directory.
+ # The default value is '$vardir/log'.
+ logdir = /var/log/puppet
+EOF
+
+cd /usr/libexec
+patch -p0 << EOF
+--- ovirt-init-functions.sh 2013-03-21 15:30:13.078014954 -0700
++++ ovirt-init-functions-new.sh 2013-03-21 16:33:52.893135359 -0700
+@@ -223,6 +223,9 @@
+ # rhn_proxyuser=PROXY-USERNAME
+ # rhn_proxypassword=PROXY-PASSWORD
+ # snmp_password=<authpassphrase>
++ # puppet_enabled=<y|n>
++ # puppet_server=server
++ # puppet_cetname=<certname>
+
+ # BOOTIF=link|eth*|<MAC> (appended by pxelinux)
+ # network boot interface is assumed to be on management network where
+@@ -329,6 +332,14 @@
+ cim_passwd=
+ cim_enabled=
+
++ # Puppet related options
++ # puppet_enabled=y|n
++ # puppet_server=server
++ # puppet_certname=<certname>
++ puppet_enabled=
++ puppet_server=
++ puppet_certame=
++
+ # pxelinux format: ip=<client-ip>:<boot-server-ip>:<gw-ip>:<netmask>
+ # anaconda format: ip=<client-ip> netmask=<netmask> gateway=<gw-ip>
+ # or ip=dhcp|off
+@@ -613,6 +624,19 @@
+ snmp_password=${i#snmp_password=}
+ ;;
+
++ puppet_enabled=n | puppet_enabled=0)
++ puppet_enabled=0
++ ;;
++ puppet_enabled* | puppet_enabled=y | puppet_enabled=1)
++ puppet_enabled=1
++ ;;
++ puppet_server=*)
++ puppet_server=${i#puppet_server=}
++ ;;
++ puppet_certname=*)
++ puppet_certname=${i#puppet_certname=}
++ ;;
++
+ mem_overcommit* | ovirt_overcommit*)
+ i=${i#mem_overcommit=}
+ i=${i#ovirt_overcommit=}
+@@ -797,7 +821,7 @@
+
+
+ # save boot parameters as defaults for ovirt-config-*
+- params="bootif init init_app vol_boot_size vol_efi_size vol_swap_size vol_root_size vol_config_size vol_logging_size vol_data_size vol_swap2_size vol_data2_size crypt_swap crypt_swap2 upgrade standalone overcommit ip_address ip_netmask ip_gateway ipv6 dns ntp vlan ssh_pwauth syslog_server syslog_port collectd_server collectd_port bootparams hostname firstboot rhn_type rhn_url rhn_ca_cert rhn_username rhn_password rhn_profile rhn_activationkey rhn_org rhn_proxy rhn_proxyuser rhn_proxypassword runtime_mode kdump_nfs iscsi_name snmp_password install netconsole_server netconsole_port stateless cim_enabled wipe_fakeraid iscsi_init iscsi_target_name iscsi_target_host iscsi_target_port iscsi_install"
++ params="bootif init init_app vol_boot_size vol_efi_size vol_swap_size vol_root_size vol_config_size vol_logging_size vol_data_size vol_swap2_size vol_data2_size crypt_swap crypt_swap2 upgrade standalone overcommit ip_address ip_netmask ip_gateway ipv6 dns ntp vlan ssh_pwauth syslog_server syslog_port collectd_server collectd_port bootparams hostname firstboot rhn_type rhn_url rhn_ca_cert rhn_username rhn_password rhn_profile rhn_activationkey rhn_org rhn_proxy rhn_proxyuser rhn_proxypassword runtime_mode kdump_nfs iscsi_name snmp_password install netconsole_server netconsole_port stateless cim_enabled wipe_fakeraid iscsi_init iscsi_target_name iscsi_target_host iscsi_target_port iscsi_install puppet_enabled puppet_server puppet_certname"
+ # mount /config unless firstboot is forced
+ if [ "$firstboot" != "1" ]; then
+ mount_config
+@@ -855,6 +879,13 @@
+ /usr/sbin/usermod -p "$rootpw" root
+ chage -d 0 root
+ fi
++ if [ "$puppet_enabled" = 1]; then
++ if [ `hostname` != "localhost" ] | [ -n $puppet_certname ]; then
++ python -c "from ovirt.node.setup.puppet_page import *; ActivatePuppet()"
++ else
++ log "Puppet disabled. Hostname not set and puppet_certname not specified"
++ fi
++ fi
+ # check if root or admin password is expired, this might be upon reboot
+ # in case of automated installed with rootpw or adminpw parameter!
+ if LC_ALL=C chage -l root | grep -q "password must be changed" \
+@@ -1373,8 +1404,6 @@
+ return $?
+ }
+
+-
+-
+ #
+ # If called with a param from .service file:
+ #
+EOF
+
+%preun
+
+%files recipe
+%{recipe_root}
+
+%files
+%{python_sitelib}/ovirt/node/setup/puppet_page.py*
+%{_localstatedir}/lib/puppet/facts/ovirt.rb
+
+%changelog
+* Fri Mar 22 2013 Ryan Barry <rbarry at redhat.com> 0.0.1
+- initial commit
diff --git a/plugins/puppet/build/recipe/Makefile.am b/plugins/puppet/build/recipe/Makefile.am
new file mode 100644
index 0000000..5f06fe0
--- /dev/null
+++ b/plugins/puppet/build/recipe/Makefile.am
@@ -0,0 +1,25 @@
+# Copyright (C) 2010, Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301, USA. A copy of the GNU General Public License is
+# also available at http://www.gnu.org/copyleft/gpl.html.
+
+EXTRA_DIST = \
+ *.ks
+
+OVIRT_NODE_RECIPEdir = $(datadir)/ovirt-node-recipe
+OVIRT_NODE_RECIPE_DATA = \
+ puppet-plugin-minimizer.ks \
+ puppet-plugin-iso.ks
+
diff --git a/plugins/puppet/build/recipe/puppet-plugin-iso.ks b/plugins/puppet/build/recipe/puppet-plugin-iso.ks
new file mode 100644
index 0000000..28bb232
--- /dev/null
+++ b/plugins/puppet/build/recipe/puppet-plugin-iso.ks
@@ -0,0 +1 @@
+%include ovirt-node-image.ks
diff --git a/plugins/puppet/build/recipe/puppet-plugin-minimizer.ks b/plugins/puppet/build/recipe/puppet-plugin-minimizer.ks
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/plugins/puppet/build/recipe/puppet-plugin-minimizer.ks
diff --git a/plugins/puppet/build/src/Makefile.am b/plugins/puppet/build/src/Makefile.am
new file mode 100644
index 0000000..61b4714
--- /dev/null
+++ b/plugins/puppet/build/src/Makefile.am
@@ -0,0 +1,42 @@
+# Copyright (C) 2010 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301, USA. A copy of the GNU General Public License is
+# also available at http://www.gnu.org/copyleft/gpl.html.
+
+nodeconfdir = $(sysconfdir)/sysconfig
+localboottriggerdir=$(sysconfdir)/ovirt-config-boot.d
+
+#
+# newt tui
+#
+pyovirtsetupdir = $(pythondir)/ovirt/node/setup
+pyovirtsetup_PYTHON = \
+ puppet_page.py
+
+EXTRA_DIST = \
+ *.rb
+
+rbovirtsetupdir = $(localstatedir)/lib/puppet/facts
+rbovirtsetup_SCRIPTS = \
+ ovirt.rb
+
+# Requires python-pep8 package (Fedora)
+check-local: check-local-pep8
+
+check-local-pep8:
+ find $(srcdir) -name \*.py | sort | uniq | xargs pep8 --repeat --statistics --count
+
+check-local-doctest:
+ find $(srcdir) -name \*.py | sort | uniq | xargs python -m doctest -v
diff --git a/plugins/puppet/build/src/ovirt.rb b/plugins/puppet/build/src/ovirt.rb
new file mode 100644
index 0000000..4ef3575
--- /dev/null
+++ b/plugins/puppet/build/src/ovirt.rb
@@ -0,0 +1,26 @@
+Facter.add(:operatingsystem) do
+ has_weight 100_000_000
+ confine :kernel => :linux
+ setcode do
+ if FileTest.exists?("/etc/default/version")
+ txt = File.read("/etc/default/version")
+ if txt =~ /^PRODUCT='(.*?)\s/
+ $1
+ end
+ end
+ end
+end
+
+Facter.add(:operatingsystemrelease) do
+ confine :operatingsystem => %w{oVirt}
+ setcode do
+ if FileTest.exists?("/etc/default/version")
+ txt = File.read("/etc/default/version")
+ if txt =~ /^VERSION=(.*)/
+ $1
+ else
+ "unknown"
+ end
+ end
+ end
+end
diff --git a/plugins/puppet/build/src/puppet_page.py b/plugins/puppet/build/src/puppet_page.py
new file mode 100644
index 0000000..eed8ca0
--- /dev/null
+++ b/plugins/puppet/build/src/puppet_page.py
@@ -0,0 +1,157 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+#
+# puppet_page.py - Copyright (C) 2013 Red Hat, Inc.
+# Written by Ryan Barry <rbarry at redhat.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301, USA. A copy of the GNU General Public License is
+# also available at http://www.gnu.org/copyleft/gpl.html.
+from ovirt.node import plugins, valid, ui, utils
+from ovirt.node.config.defaults import NodeConfigFileSection
+from ovirt.node.plugins import Changeset
+import logging
+import socket
+import re
+
+"""
+Configure Puppet
+"""
+
+
+LOGGER = logging.getLogger(__name__)
+
+
+class Plugin(plugins.NodePlugin):
+ _server = None
+
+ def name(self):
+ return "Puppet"
+
+ def rank(self):
+ return 105
+
+ def model(self):
+ cfg = Puppet().retrieve()
+ model = {
+ "puppet.enabled": True if cfg["enabled"] else False,
+ "puppet.server": cfg["server"] or "puppet",
+ "puppet.certname": cfg["certname"] or socket.gethostname()
+ }
+ return model
+
+ def validators(self):
+ return {"puppet.server": valid.FQDNOrIPAddress() | valid.Empty(),
+ }
+
+ def ui_content(self):
+ ws = [ui.Header("header[0]", "Puppet Configuration"),
+ ui.Checkbox("puppet.enabled", "Enable Puppet"),
+ ui.Entry("puppet.server", "Puppet Server:"),
+ ui.Entry("puppet.certname", "Puppet Certificate Name"),
+ ui.Divider("divider[0]"),
+ ]
+
+ page = ui.Page("page", ws)
+ page.buttons = [ui.SaveButton("action.register", "Save & Run")]
+
+ self.widgets.add(page)
+ return page
+
+ def on_change(self, changes):
+ pass
+
+ def on_merge(self, effective_changes):
+ self.logger.info("Saving Puppet config")
+ changes = Changeset(self.pending_changes(False))
+ effective_model = Changeset(self.model())
+ effective_model.update(effective_changes)
+
+ puppet_keys = ["puppet.enabled", "puppet.server", "puppet.certname"]
+ if changes.contains_any(puppet_keys):
+ Puppet().update(*effective_model.values_for(puppet_keys))
+
+ self.logger.debug("Changes: %s" % changes)
+ self.logger.debug("Effective Model: %s" % effective_model)
+
+ txs = utils.Transaction("Configuring Puppet")
+
+ if effective_changes.contains_any(["action.register"]):
+ self.logger.debug("Connecting to puppet")
+ txs += [ActivatePuppet()]
+
+ if len(txs) > 0:
+ progress_dialog = ui.TransactionProgressDialog("dialog.txs", txs,
+ self)
+ progress_dialog.run()
+
+ # Acts like a page reload
+ return self.ui_content()
+
+
+#
+#
+# Functions and classes to support the UI
+#
+#
+class Puppet(NodeConfigFileSection):
+ """Class to handle Puppet configuration in /etc/default/ovirt file
+
+ >>> from ovirt.node.config.defaults import ConfigFile, SimpleProvider
+ >>> fn = "/tmp/cfg_dummy"
+ >>> cfgfile = ConfigFile(fn, SimpleProvider)
+ >>> n = Puppet(cfgfile)
+ >>> n.update("puppet.example.com")
+ >>> sorted(n.retrieve().items())
+ [(server, 'puppet.example.com')]
+ """
+ keys = ("OVIRT_PUPPET_ENABLED",
+ "OVIRT_PUPPET_SERVER",
+ "OVIRT_PUPPET_CERTIFICATE_NAME"
+ )
+
+ @NodeConfigFileSection.map_and_update_defaults_decorator
+ def update(self, enabled, server, certname):
+ valid.Boolean()(enabled)
+ (valid.Empty() | valid.FQDNOrIPAddress())(server)
+ (valid.Empty() | valid.FQDN())(certname)
+ return {"OVIRT_PUPPET_ENABLED": "yes" if enabled else False}
+
+
+class ActivatePuppet(utils.Transaction.Element):
+
+ title = "Activating Puppet"
+
+ def commit(self):
+
+ self.logger.info("Connecting to Puppet server")
+
+ cfg = Puppet().retrieve()
+
+ with open("/etc/puppet/puppet.conf") as conf:
+ lines = conf.readlines()
+ with open("/etc/puppet/puppet.conf", "w") as conf:
+ for line in lines:
+ try:
+ item = re.match(r'^\s+(\w+) =', line).group(1)
+ if item in cfg:
+ print "matched"
+ conf.write(re.sub(r'(^.*?' + item + ' =).*', r'\1 "' +
+ cfg[item] + '"', line))
+ except:
+ conf.write(line)
+
+ utils.process.call("service puppet stop")
+ #utils.process.check_call("puppet agent --test")
+ #utils.process.call("service puppet start")
diff --git a/plugins/puppet/configure.ac b/plugins/puppet/configure.ac
new file mode 100644
index 0000000..f408efb
--- /dev/null
+++ b/plugins/puppet/configure.ac
@@ -0,0 +1,10 @@
+AC_INIT([puppet-ovirt-node-plugin], [0.0.1], [node-devel at ovirt.org])
+AM_INIT_AUTOMAKE([-Wall -Werror foreign -Wno-portability tar-pax])
+
+AM_PATH_PYTHON
+
+AC_CONFIG_FILES([Makefile
+ src/Makefile
+ recipe/Makefile
+ puppet-ovirt-node-plugin.spec])
+AC_OUTPUT
diff --git a/plugins/puppet/provider/Makefile.am b/plugins/puppet/provider/Makefile.am
new file mode 100644
index 0000000..0d2886c
--- /dev/null
+++ b/plugins/puppet/provider/Makefile.am
@@ -0,0 +1,25 @@
+# Copyright (C) 2010, Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301, USA. A copy of the GNU General Public License is
+# also available at http://www.gnu.org/copyleft/gpl.html.
+
+EXTRA_DIST = \
+ *.rb
+
+OVIRT_NODE_RECIPEdir = $(datadir)/ovirt-node-recipe
+OVIRT_NODE_RECIPE_DATA = \
+ puppet-plugin-minimizer.ks \
+ puppet-plugin-iso.ks
+
diff --git a/plugins/puppet/provider/lib/ovirt_node.rb b/plugins/puppet/provider/lib/ovirt_node.rb
new file mode 100644
index 0000000..09ae3f8
--- /dev/null
+++ b/plugins/puppet/provider/lib/ovirt_node.rb
@@ -0,0 +1,113 @@
+require 'fileutils'
+require 'filetest'
+require 'augeas'
+
+Puppet::Type.type(:ovirt_node).provide(:ovirt) do
+ commands :python => "/usr/bin/python"
+
+ def initialize(value={})
+ super(value)
+ @property_flush = {}
+ end
+
+ def update_wrapper(type, value)
+ python("-c 'from ovirt.node.config import defaults; model = defaults.#{type}(); model.update(#{value}); tx = model.transaction(); tx()'")
+ end
+
+ def instances
+ config_vars = %w[hostname ssh_pwauth dns ip_address ip_gateway ip_netmask
+ management_server use_strong_rng]
+ if FileTests.exists?("/etc/pki/vdsm/certs/engine_web_ca.pem")
+ engine = %x(openssl x509 -in /etc/pki/vdsm/certs/engine_web_ca.pem -noout -issuer).
+ match(/CN=CA-(.*?)\.\d+$/)
+ if engine?
+ vars = {}
+# augtool = %x(augtool print /files/etc/default/ovirt | grep = | awk '{print $1}')
+ keys = Hash[keys.split("\n").collect.map { |x| [x, nil] } ]
+ keys.each.key do |key|
+ if config_vars.include? "OVIRT_#{key}".downcase
+ Augeas::open do |aug|
+ x = aug.get(key)
+ vars[key.split("/").last.to_sym] = x
+ end
+ end
+ end
+ new(vars)
+ end
+ end
+ end
+
+ def exists?
+ `openssl x509 -in /etc/pki/vdsm/certs/engine_web_ca.pem -noout -issuer`
+ .match(/CN=CA-#{@resource[:address]}/) ? true : false
+ end
+
+ def address=(engine)
+ puts "Do nothing"
+ #Waiting to see logic from new VDSM plugin
+ end
+
+ def nfsdomain=(domain)
+ # The py snippet below will only change the runtime configuratio (NFSv4 domain)
+ # To make persistent changes we'll need to use the ovirt.node.config.defaults
+ # module, which gives us access to all topics which are covered by Node's logic.
+ # ovirt.node.utils.* modules only change the runtime config, but don't persist the
+ # changes.
+ # See ssh_pwauth for a complete example
+ update_wrapper("NFS", domain)
+ end
+
+ def iscsi_initiator=(name)
+ update_wrapper("iSCSI", name)
+ end
+
+ def ssh=(bool)
+ # It needs to be ensured that #{bool} is either True or False (so a bool in py syntax)
+ value = ""
+ if bool
+ value = "True"
+ else
+ value = "False"
+ end
+ update_wrapper("SSH", value)
+ end
+
+ def kdump=(options)
+ kdump = options.first
+ kdump.each do |type, server|
+ if type.downcase == "ssh"
+ #It's SSH
+ update_wrapper("KDump", "None, #{server}, None")
+ elsif type.downcase == "nfs"
+ update_wrapper("KDump", "#{server}, None, None")
+ end
+ end
+ end
+
+ def rsyslog=(server)
+ server, port = server.split(":")[0]
+ port = port ? port : 7634
+ update_wrapper("Syslog", "#{server}, #{port}")
+ end
+
+ def netconsole=(server)
+ server, port = server.split(":")[0]
+ port = port ? port : 7634
+ update_wrapper("Netconsole", "#{server}, #{port}")
+ end
+
+ def monitoring=(server)
+ server, port = server.split(":")[0]
+ port = port ? port : 7634
+ update_wrapper("Collectd", "#{server}, #{port}")
+ end
+
+ def ntp=(servers)
+ update_wrapper("Timeservers", "[#{servers.join(", ")}]")
+ end
+
+ def ntp=(servers)
+ update_wrapper("Nameservers", "[#{servers.join(", ")}]")
+ end
+
+end
diff --git a/plugins/puppet/provider/type/.ovirt_node.rb.swp b/plugins/puppet/provider/type/.ovirt_node.rb.swp
new file mode 100644
index 0000000..26502ae
--- /dev/null
+++ b/plugins/puppet/provider/type/.ovirt_node.rb.swp
Binary files differ
diff --git a/plugins/puppet/provider/type/ovirt_node.rb b/plugins/puppet/provider/type/ovirt_node.rb
new file mode 100644
index 0000000..c6b7d1e
--- /dev/null
+++ b/plugins/puppet/provider/type/ovirt_node.rb
@@ -0,0 +1,48 @@
+Puppet::Type.newtype(:ovirt_node) do
+ ensurable
+
+ newparam(:address, :namevar => true) do
+ desc "The address of the server"
+ end
+
+ newparam(:nfsdomain) do
+ desc "The NFSv4 domain for the node"
+ end
+
+ newparam(:iscsi_initiator) do
+ desc "The iSCSI Initiator Name"
+ end
+
+ newparam(:kdump) do
+ desc "kdump configuration"
+ end
+
+ newparam(:ssh) do
+ desc "Enable SSH authentication"
+ newvalues(:True, :true, :False, :false)
+ defaultto :False
+
+ munge do |value|
+ case value
+ when :true
+ :True
+ when :false
+ :False
+ else
+ super
+ end
+ end
+ end
+
+ newparam(:rsyslog) do
+ desc "RSyslog server"
+ end
+
+ newparam(:netconsole) do
+ desc "Netconsole server"
+ end
+
+ newparam(:monitoring) do
+ desc "Monitoring server"
+ end
+end
diff --git a/plugins/puppet/puppet-ovirt-node-plugin.spec.in b/plugins/puppet/puppet-ovirt-node-plugin.spec.in
new file mode 100644
index 0000000..7b4999a
--- /dev/null
+++ b/plugins/puppet/puppet-ovirt-node-plugin.spec.in
@@ -0,0 +1,191 @@
+Summary: A plugin to make oVirt Node installs compatible with Puppet
+Name: puppet-ovirt-node-plugin
+Version: @VERSION@
+Release: 0%{?BUILD_NUMBER}%{?extra_release}%{?dist}
+Source0: %{name}-%{version}.tar.gz
+License: GPLv2+
+Group: Applications/System
+
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot
+URL: http://www.ovirt.org/
+BuildRequires: automake autoconf
+Requires: ovirt-node >= 2.6.0
+Requires: puppet
+
+BuildArch: noarch
+
+%define app_root %{_datadir}/%{name}
+%define recipe_root %{_datadir}/ovirt-node-recipe
+
+%description
+Provides UI and associated scripts for integrating oVirt Node and Puppet
+
+%package recipe
+Summary: Kickstarts for building oVirt Node isos including %{name}
+Group: Applications/System
+Requires: ovirt-node-recipe >= 2.6.0
+
+%description recipe
+Provides kickstart files for generating an oVirt Node ISO image containing
+%{name}.
+
+%prep
+%setup -q
+
+
+%build
+aclocal && autoheader && automake --add-missing && autoconf
+
+
+%configure
+make
+
+
+%install
+%{__rm} -rf %{buildroot}
+make install DESTDIR=%{buildroot}
+
+
+%clean
+%{__rm} -rf %{buildroot}
+
+
+%post -p /bin/bash
+cd /usr/share/ruby/vendor_ruby/facter
+patch -p0 << EOF
+--- operatingsystem.rb 2013-03-19 16:12:46.610079038 -0700
++++ operatingsystemnew.rb 2013-03-21 11:51:59.199657472 -0700
+@@ -10,6 +10,9 @@
+ #
+ # Caveats:
+ #
++#
++\$LOAD_PATH.unshift('/var/lib/puppet/facts')
++require 'ovirt.rb'
+
+ Facter.add(:operatingsystem) do
+ confine :kernel => :sunos
+@@ -25,7 +28,12 @@
+ Facter.add(:operatingsystem) do
+ confine :kernel => :linux
+ setcode do
+- if Facter.value(:lsbdistid) == "Ubuntu"
++ if FileTest.exists?("/etc/default/version")
++ txt = File.read("/etc/default/version")
++ if txt =~ /^PRODUCT='(.*?)\s/
++ $1
++ end
++ elsif Facter.value(:lsbdistid) == "Ubuntu"
+ "Ubuntu"
+ elsif FileTest.exists?("/etc/debian_version")
+ "Debian"
+EOF
+
+cd /etc/puppet
+patch -p0 << EOF
+--- puppet.conf 2013-03-21 14:55:43.969130799 -0700
++++ puppet.conf.new 2013-03-21 14:56:02.690178578 -0700
+@@ -1,4 +1,6 @@
+ [main]
++ server = ""
++ certname = ""
+ # The Puppet log directory.
+ # The default value is '$vardir/log'.
+ logdir = /var/log/puppet
+EOF
+
+cd /usr/libexec
+patch -p0 << EOF
+--- ovirt-init-functions.sh 2013-03-21 15:30:13.078014954 -0700
++++ ovirt-init-functions-new.sh 2013-03-21 16:33:52.893135359 -0700
+@@ -223,6 +223,9 @@
+ # rhn_proxyuser=PROXY-USERNAME
+ # rhn_proxypassword=PROXY-PASSWORD
+ # snmp_password=<authpassphrase>
++ # puppet_enabled=<y|n>
++ # puppet_server=server
++ # puppet_cetname=<certname>
+
+ # BOOTIF=link|eth*|<MAC> (appended by pxelinux)
+ # network boot interface is assumed to be on management network where
+@@ -329,6 +332,14 @@
+ cim_passwd=
+ cim_enabled=
+
++ # Puppet related options
++ # puppet_enabled=y|n
++ # puppet_server=server
++ # puppet_certname=<certname>
++ puppet_enabled=
++ puppet_server=
++ puppet_certame=
++
+ # pxelinux format: ip=<client-ip>:<boot-server-ip>:<gw-ip>:<netmask>
+ # anaconda format: ip=<client-ip> netmask=<netmask> gateway=<gw-ip>
+ # or ip=dhcp|off
+@@ -613,6 +624,19 @@
+ snmp_password=${i#snmp_password=}
+ ;;
+
++ puppet_enabled=n | puppet_enabled=0)
++ puppet_enabled=0
++ ;;
++ puppet_enabled* | puppet_enabled=y | puppet_enabled=1)
++ puppet_enabled=1
++ ;;
++ puppet_server=*)
++ puppet_server=${i#puppet_server=}
++ ;;
++ puppet_certname=*)
++ puppet_certname=${i#puppet_certname=}
++ ;;
++
+ mem_overcommit* | ovirt_overcommit*)
+ i=${i#mem_overcommit=}
+ i=${i#ovirt_overcommit=}
+@@ -797,7 +821,7 @@
+
+
+ # save boot parameters as defaults for ovirt-config-*
+- params="bootif init init_app vol_boot_size vol_efi_size vol_swap_size vol_root_size vol_config_size vol_logging_size vol_data_size vol_swap2_size vol_data2_size crypt_swap crypt_swap2 upgrade standalone overcommit ip_address ip_netmask ip_gateway ipv6 dns ntp vlan ssh_pwauth syslog_server syslog_port collectd_server collectd_port bootparams hostname firstboot rhn_type rhn_url rhn_ca_cert rhn_username rhn_password rhn_profile rhn_activationkey rhn_org rhn_proxy rhn_proxyuser rhn_proxypassword runtime_mode kdump_nfs iscsi_name snmp_password install netconsole_server netconsole_port stateless cim_enabled wipe_fakeraid iscsi_init iscsi_target_name iscsi_target_host iscsi_target_port iscsi_install"
++ params="bootif init init_app vol_boot_size vol_efi_size vol_swap_size vol_root_size vol_config_size vol_logging_size vol_data_size vol_swap2_size vol_data2_size crypt_swap crypt_swap2 upgrade standalone overcommit ip_address ip_netmask ip_gateway ipv6 dns ntp vlan ssh_pwauth syslog_server syslog_port collectd_server collectd_port bootparams hostname firstboot rhn_type rhn_url rhn_ca_cert rhn_username rhn_password rhn_profile rhn_activationkey rhn_org rhn_proxy rhn_proxyuser rhn_proxypassword runtime_mode kdump_nfs iscsi_name snmp_password install netconsole_server netconsole_port stateless cim_enabled wipe_fakeraid iscsi_init iscsi_target_name iscsi_target_host iscsi_target_port iscsi_install puppet_enabled puppet_server puppet_certname"
+ # mount /config unless firstboot is forced
+ if [ "$firstboot" != "1" ]; then
+ mount_config
+@@ -855,6 +879,13 @@
+ /usr/sbin/usermod -p "$rootpw" root
+ chage -d 0 root
+ fi
++ if [ "$puppet_enabled" = 1]; then
++ if [ `hostname` != "localhost" ] | [ -n $puppet_certname ]; then
++ python -c "from ovirt.node.setup.puppet_page import *; ActivatePuppet()"
++ else
++ log "Puppet disabled. Hostname not set and puppet_certname not specified"
++ fi
++ fi
+ # check if root or admin password is expired, this might be upon reboot
+ # in case of automated installed with rootpw or adminpw parameter!
+ if LC_ALL=C chage -l root | grep -q "password must be changed" \
+@@ -1373,8 +1404,6 @@
+ return $?
+ }
+
+-
+-
+ #
+ # If called with a param from .service file:
+ #
+EOF
+
+%preun
+
+%files recipe
+%{recipe_root}
+
+%files
+%{python_sitelib}/ovirt/node/setup/puppet_page.py*
+%{_localstatedir}/lib/puppet/facts/ovirt.rb
+
+%changelog
+* Fri Mar 22 2013 Ryan Barry <rbarry at redhat.com> 0.0.1
+- initial commit
diff --git a/plugins/puppet/recipe/Makefile.am b/plugins/puppet/recipe/Makefile.am
new file mode 100644
index 0000000..5f06fe0
--- /dev/null
+++ b/plugins/puppet/recipe/Makefile.am
@@ -0,0 +1,25 @@
+# Copyright (C) 2010, Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301, USA. A copy of the GNU General Public License is
+# also available at http://www.gnu.org/copyleft/gpl.html.
+
+EXTRA_DIST = \
+ *.ks
+
+OVIRT_NODE_RECIPEdir = $(datadir)/ovirt-node-recipe
+OVIRT_NODE_RECIPE_DATA = \
+ puppet-plugin-minimizer.ks \
+ puppet-plugin-iso.ks
+
diff --git a/plugins/puppet/recipe/puppet-plugin-iso.ks b/plugins/puppet/recipe/puppet-plugin-iso.ks
new file mode 100644
index 0000000..28bb232
--- /dev/null
+++ b/plugins/puppet/recipe/puppet-plugin-iso.ks
@@ -0,0 +1 @@
+%include ovirt-node-image.ks
diff --git a/plugins/puppet/recipe/puppet-plugin-minimizer.ks b/plugins/puppet/recipe/puppet-plugin-minimizer.ks
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/plugins/puppet/recipe/puppet-plugin-minimizer.ks
diff --git a/plugins/puppet/src/Makefile.am b/plugins/puppet/src/Makefile.am
new file mode 100644
index 0000000..61b4714
--- /dev/null
+++ b/plugins/puppet/src/Makefile.am
@@ -0,0 +1,42 @@
+# Copyright (C) 2010 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301, USA. A copy of the GNU General Public License is
+# also available at http://www.gnu.org/copyleft/gpl.html.
+
+nodeconfdir = $(sysconfdir)/sysconfig
+localboottriggerdir=$(sysconfdir)/ovirt-config-boot.d
+
+#
+# newt tui
+#
+pyovirtsetupdir = $(pythondir)/ovirt/node/setup
+pyovirtsetup_PYTHON = \
+ puppet_page.py
+
+EXTRA_DIST = \
+ *.rb
+
+rbovirtsetupdir = $(localstatedir)/lib/puppet/facts
+rbovirtsetup_SCRIPTS = \
+ ovirt.rb
+
+# Requires python-pep8 package (Fedora)
+check-local: check-local-pep8
+
+check-local-pep8:
+ find $(srcdir) -name \*.py | sort | uniq | xargs pep8 --repeat --statistics --count
+
+check-local-doctest:
+ find $(srcdir) -name \*.py | sort | uniq | xargs python -m doctest -v
diff --git a/plugins/puppet/src/ovirt.rb b/plugins/puppet/src/ovirt.rb
new file mode 100644
index 0000000..4ef3575
--- /dev/null
+++ b/plugins/puppet/src/ovirt.rb
@@ -0,0 +1,26 @@
+Facter.add(:operatingsystem) do
+ has_weight 100_000_000
+ confine :kernel => :linux
+ setcode do
+ if FileTest.exists?("/etc/default/version")
+ txt = File.read("/etc/default/version")
+ if txt =~ /^PRODUCT='(.*?)\s/
+ $1
+ end
+ end
+ end
+end
+
+Facter.add(:operatingsystemrelease) do
+ confine :operatingsystem => %w{oVirt}
+ setcode do
+ if FileTest.exists?("/etc/default/version")
+ txt = File.read("/etc/default/version")
+ if txt =~ /^VERSION=(.*)/
+ $1
+ else
+ "unknown"
+ end
+ end
+ end
+end
diff --git a/plugins/puppet/src/puppet_page.py b/plugins/puppet/src/puppet_page.py
new file mode 100644
index 0000000..eed8ca0
--- /dev/null
+++ b/plugins/puppet/src/puppet_page.py
@@ -0,0 +1,157 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+#
+# puppet_page.py - Copyright (C) 2013 Red Hat, Inc.
+# Written by Ryan Barry <rbarry at redhat.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301, USA. A copy of the GNU General Public License is
+# also available at http://www.gnu.org/copyleft/gpl.html.
+from ovirt.node import plugins, valid, ui, utils
+from ovirt.node.config.defaults import NodeConfigFileSection
+from ovirt.node.plugins import Changeset
+import logging
+import socket
+import re
+
+"""
+Configure Puppet
+"""
+
+
+LOGGER = logging.getLogger(__name__)
+
+
+class Plugin(plugins.NodePlugin):
+ _server = None
+
+ def name(self):
+ return "Puppet"
+
+ def rank(self):
+ return 105
+
+ def model(self):
+ cfg = Puppet().retrieve()
+ model = {
+ "puppet.enabled": True if cfg["enabled"] else False,
+ "puppet.server": cfg["server"] or "puppet",
+ "puppet.certname": cfg["certname"] or socket.gethostname()
+ }
+ return model
+
+ def validators(self):
+ return {"puppet.server": valid.FQDNOrIPAddress() | valid.Empty(),
+ }
+
+ def ui_content(self):
+ ws = [ui.Header("header[0]", "Puppet Configuration"),
+ ui.Checkbox("puppet.enabled", "Enable Puppet"),
+ ui.Entry("puppet.server", "Puppet Server:"),
+ ui.Entry("puppet.certname", "Puppet Certificate Name"),
+ ui.Divider("divider[0]"),
+ ]
+
+ page = ui.Page("page", ws)
+ page.buttons = [ui.SaveButton("action.register", "Save & Run")]
+
+ self.widgets.add(page)
+ return page
+
+ def on_change(self, changes):
+ pass
+
+ def on_merge(self, effective_changes):
+ self.logger.info("Saving Puppet config")
+ changes = Changeset(self.pending_changes(False))
+ effective_model = Changeset(self.model())
+ effective_model.update(effective_changes)
+
+ puppet_keys = ["puppet.enabled", "puppet.server", "puppet.certname"]
+ if changes.contains_any(puppet_keys):
+ Puppet().update(*effective_model.values_for(puppet_keys))
+
+ self.logger.debug("Changes: %s" % changes)
+ self.logger.debug("Effective Model: %s" % effective_model)
+
+ txs = utils.Transaction("Configuring Puppet")
+
+ if effective_changes.contains_any(["action.register"]):
+ self.logger.debug("Connecting to puppet")
+ txs += [ActivatePuppet()]
+
+ if len(txs) > 0:
+ progress_dialog = ui.TransactionProgressDialog("dialog.txs", txs,
+ self)
+ progress_dialog.run()
+
+ # Acts like a page reload
+ return self.ui_content()
+
+
+#
+#
+# Functions and classes to support the UI
+#
+#
+class Puppet(NodeConfigFileSection):
+ """Class to handle Puppet configuration in /etc/default/ovirt file
+
+ >>> from ovirt.node.config.defaults import ConfigFile, SimpleProvider
+ >>> fn = "/tmp/cfg_dummy"
+ >>> cfgfile = ConfigFile(fn, SimpleProvider)
+ >>> n = Puppet(cfgfile)
+ >>> n.update("puppet.example.com")
+ >>> sorted(n.retrieve().items())
+ [(server, 'puppet.example.com')]
+ """
+ keys = ("OVIRT_PUPPET_ENABLED",
+ "OVIRT_PUPPET_SERVER",
+ "OVIRT_PUPPET_CERTIFICATE_NAME"
+ )
+
+ @NodeConfigFileSection.map_and_update_defaults_decorator
+ def update(self, enabled, server, certname):
+ valid.Boolean()(enabled)
+ (valid.Empty() | valid.FQDNOrIPAddress())(server)
+ (valid.Empty() | valid.FQDN())(certname)
+ return {"OVIRT_PUPPET_ENABLED": "yes" if enabled else False}
+
+
+class ActivatePuppet(utils.Transaction.Element):
+
+ title = "Activating Puppet"
+
+ def commit(self):
+
+ self.logger.info("Connecting to Puppet server")
+
+ cfg = Puppet().retrieve()
+
+ with open("/etc/puppet/puppet.conf") as conf:
+ lines = conf.readlines()
+ with open("/etc/puppet/puppet.conf", "w") as conf:
+ for line in lines:
+ try:
+ item = re.match(r'^\s+(\w+) =', line).group(1)
+ if item in cfg:
+ print "matched"
+ conf.write(re.sub(r'(^.*?' + item + ' =).*', r'\1 "' +
+ cfg[item] + '"', line))
+ except:
+ conf.write(line)
+
+ utils.process.call("service puppet stop")
+ #utils.process.check_call("puppet agent --test")
+ #utils.process.call("service puppet start")
--
To view, visit http://gerrit.ovirt.org/14664
To unsubscribe, visit http://gerrit.ovirt.org/settings
Gerrit-MessageType: newchange
Gerrit-Change-Id: Icb639acf019a48e809fb983ab2124c6215c00157
Gerrit-PatchSet: 1
Gerrit-Project: ovirt-node
Gerrit-Branch: puppet-ovirt-node-plugin
Gerrit-Owner: Ryan Barry <rbarry at redhat.com>
More information about the node-patches
mailing list