[node-patches] Build failed in Jenkins: ovirt-node-iso #1258
jenkins at ovirt.org
jenkins at ovirt.org
Fri Feb 28 11:01:30 UTC 2014
See <http://jenkins.ovirt.org/job/ovirt-node-iso/1258/>
------------------------------------------
Started by upstream project "ovirt-node-stable" build number 634
originally caused by:
Started by an SCM change
Building remotely on centos6-vm01 in workspace <http://jenkins.ovirt.org/job/ovirt-node-iso/ws/>
Fetching changes from the remote Git repository
Fetching upstream changes from http://gerrit.ovirt.org/p/ovirt-node-iso.git
Checking out Revision 5ac5557fc5521d644a84559741db5a6c0beee4ba (origin/master)
[ovirt-node-iso] $ /bin/sh -xe /tmp/hudson6681301920536692115.sh
+ rm -rf <http://jenkins.ovirt.org/job/ovirt-node-iso/ws/ovirt-cache/ovirt/binary> <http://jenkins.ovirt.org/job/ovirt-node-iso/ws/ovirt-cache/ovirt/noarch> <http://jenkins.ovirt.org/job/ovirt-node-iso/ws/ovirt-cache/ovirt/repodata> <http://jenkins.ovirt.org/job/ovirt-node-iso/ws/ovirt-cache/ovirt/src> <http://jenkins.ovirt.org/job/ovirt-node-iso/ws/rpmbuild> ovirt-node-iso-3.1.0-0.999.999.20140228102559git67e3694.1257.el6.iso
+ mkdir -p <http://jenkins.ovirt.org/job/ovirt-node-iso/ws/ovirt-cache/ovirt/noarch>
+ rm -vf .rpmmacros
Copied 10 artifacts from "ovirt-node-stable" build number 634
[ovirt-node-iso] $ /bin/sh -xe /tmp/hudson6512429497869150922.sh
+ <http://jenkins.ovirt.org/job/ovirt-node-iso/ws/jenkins.sh>
#Cleanup
test -f Makefile && make -k distclean
test -z "ovirt-node-iso.spec" || rm -f ovirt-node-iso.spec
test . = "." || test -z "" || rm -f
test -z "ovirt-node-iso-3.1.0.tar.gz repos.ks Makefile.in aclocal.m4 autom4te.cache configure install-sh missing *.ks" || rm -f ovirt-node-iso-3.1.0.tar.gz repos.ks Makefile.in aclocal.m4 autom4te.cache configure install-sh missing *.ks
rm: cannot remove `autom4te.cache': Is a directory
make: [distclean-generic] Error 1 (ignored)
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
rm -rf ${WORKSPACE}/ovirt-node-tools ${WORKSPACE}/*iso ${WORKSPACE}/rpmbuild ${WORKSPACE}/manifest* ${WORKSPACE}/old_artifacts ${WORKSPACE}/ovirt-node-recipe
OVIRT_CACHE_DIR=${WORKSPACE}/ovirt-cache
OVIRT_LOCAL_REPO=file://${OVIRT_CACHE_DIR}/ovirt
export OVIRT_CACHE_DIR OVIRT_LOCAL_REPO
if ls ${OVIRT_CACHE_DIR}/ovirt/noarch/ovirt-node-recipe*rpm >/dev/null 2>&1; then
RECIPE_RPM_NAME=ovirt-node-recipe
elif ls ${OVIRT_CACHE_DIR}/ovirt/noarch/ovirt-node-tools*rpm >/dev/null 2>&1; then
RECIPE_RPM_NAME=ovirt-node-tools
else
echo "ERROR: no recipe rpm found"
exit 4
fi
OVIRT_NODE_RECIPE_RPM=$(ls -t ${OVIRT_CACHE_DIR}/ovirt/noarch/${RECIPE_RPM_NAME}* | head -n1)
ls -t ${OVIRT_CACHE_DIR}/ovirt/noarch/${RECIPE_RPM_NAME}* | head -n1)
ls -t ${OVIRT_CACHE_DIR}/ovirt/noarch/${RECIPE_RPM_NAME}* | head -n1
export HOME=${WORKSPACE}
createrepo ${OVIRT_CACHE_DIR}/ovirt
Spawning worker 0 with 9 pkgs
Workers Finished
Gathering worker results
Saving Primary metadata
Saving file lists metadata
Saving other metadata
Generating sqlite DBs
Sqlite DBs complete
# ovirt-node recipe rpm should be copied to ${OVIRT_CACHE_DIR}/ovirt/noarch
mkdir ${WORKSPACE}/${RECIPE_RPM_NAME}
cd ${WORKSPACE}/${RECIPE_RPM_NAME}
rpm2cpio ${OVIRT_NODE_RECIPE_RPM} | pax -r
OVIRT_NODE_RECIPE_RPM=$(basename ${OVIRT_NODE_RECIPE_RPM})
basename ${OVIRT_NODE_RECIPE_RPM})
basename ${OVIRT_NODE_RECIPE_RPM}
ONT_NAME=$(echo $OVIRT_NODE_RECIPE_RPM | sed -r 's/^([a-zA-Z0-9\-]+)-([a-zA-Z0-9\.]+)-([a-zA-Z0-9\.]+).noarch.rpm$/\1/')
echo $OVIRT_NODE_RECIPE_RPM | sed -r 's/^([a-zA-Z0-9\-]+)-([a-zA-Z0-9\.]+)-([a-zA-Z0-9\.]+).noarch.rpm$/\1/')
echo $OVIRT_NODE_RECIPE_RPM | sed -r 's/^([a-zA-Z0-9\-]+)-([a-zA-Z0-9\.]+)-([a-zA-Z0-9\.]+).noarch.rpm$/\1/'
ONT_VERSION=$(echo $OVIRT_NODE_RECIPE_RPM | sed -r 's/^([a-zA-Z0-9\-]+)-([a-zA-Z0-9\.]+)-([a-zA-Z0-9\.]+).noarch.rpm$/\2/')
echo $OVIRT_NODE_RECIPE_RPM | sed -r 's/^([a-zA-Z0-9\-]+)-([a-zA-Z0-9\.]+)-([a-zA-Z0-9\.]+).noarch.rpm$/\2/')
echo $OVIRT_NODE_RECIPE_RPM | sed -r 's/^([a-zA-Z0-9\-]+)-([a-zA-Z0-9\.]+)-([a-zA-Z0-9\.]+).noarch.rpm$/\2/'
ONT_RELEASE=$(echo $OVIRT_NODE_RECIPE_RPM | sed -r 's/^([a-zA-Z0-9\-]+)-([a-zA-Z0-9\.]+)-([a-zA-Z0-9\.]+).noarch.rpm$/\3/')
echo $OVIRT_NODE_RECIPE_RPM | sed -r 's/^([a-zA-Z0-9\-]+)-([a-zA-Z0-9\.]+)-([a-zA-Z0-9\.]+).noarch.rpm$/\3/')
echo $OVIRT_NODE_RECIPE_RPM | sed -r 's/^([a-zA-Z0-9\-]+)-([a-zA-Z0-9\.]+)-([a-zA-Z0-9\.]+).noarch.rpm$/\3/'
ONT_BUILD_NUMBER=$(echo $ONT_RELEASE | sed -r 's/^[0-9]+\.(.*)\.[ef][lc][0-9]+$/\1./')
echo $ONT_RELEASE | sed -r 's/^[0-9]+\.(.*)\.[ef][lc][0-9]+$/\1./')
echo $ONT_RELEASE | sed -r 's/^[0-9]+\.(.*)\.[ef][lc][0-9]+$/\1./'
if [ "$ONT_BUILD_NUMBER" = "$ONT_RELEASE" ]; then
ONT_BUILD_NUMBER=""
fi
cd ${WORKSPACE}
if [ -z "${BUILD_TYPE}" ]; then
BUILD_TYPE="STABLE"
fi
RECIPE_DIR=${WORKSPACE}/${RECIPE_RPM_NAME}/usr/share/${RECIPE_RPM_NAME}
cp ${WORKSPACE}/${RECIPE_RPM_NAME}/usr/sbin/node-creator ${WORKSPACE}
./autogen.sh --with-recipe=${RECIPE_DIR} --with-build-number=${ONT_BUILD_NUMBER}${BUILD_NUMBER}
configure.ac:2: installing `./install-sh'
configure.ac:2: installing `./missing'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking how to create a pax tar archive... gnutar
configure: creating ./config.status
config.status: creating Makefile
config.status: creating ovirt-node-iso.spec
make BUILD_TYPE=$BUILD_TYPE iso publish
rm -f *.ks
cp <http://jenkins.ovirt.org/job/ovirt-node-iso/ws/ovirt-node-recipe/usr/share/ovirt-node-recipe/*.ks> .
rm -f version.ks
( \
if [ -n "6" ]; then \
CENTOS_REPO_LINE="repo --name=centos --mirrorlist=http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os" ;\
UPDATES_REPO_LINE="repo --name=centos-updates --mirrorlist=http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=updates" ;\
EPEL_REPO_LINE="repo --name=epel --baseurl=http://dl.fedoraproject.org/pub/epel/6/x86_64/" ;\
OVIRT_STABLE_REPO_LINE="repo --name=ovirt-stable-repo --baseurl=http://ovirt.org/releases//stable/rpm/EL/6\n" ;\
OVIRT_NIGHTLY_REPO_LINE="repo --name=ovirt-nightly-repo --baseurl=http://ovirt.org/releases//nightly/rpm/EL/6\n" ;\
OVIRT_BETA_REPO_LINE="repo --name=ovirt-beta-repo --baseurl=http://ovirt.org/releases//beta/rpm/EL/6\n" ;\
OVIRT_ALPHA_REPO_LINE="repo --name=ovirt-alpha-repo --baseurl=http://ovirt.org/releases//alpha/rpm/EL/6\n" ;\
NODE_STABLE_REPO_LINE="repo --name=node-stable-repo --baseurl=http://ovirt.org/releases//node-base/stable/rpm/EL/6\n" ;\
NODE_NIGHTLY_REPO_LINE="repo --name=node-nightly-repo --baseurl=http://ovirt.org/releases//node-base/nightly/rpm/EL/6\n" ;\
NODE_BETA_REPO_LINE="repo --name=node-beta-repo --baseurl=http://ovirt.org/releases//node-base/beta/rpm/EL/6\n" ;\
NODE_ALPHA_REPO_LINE="repo --name=node-alpha-repo --baseurl=http://ovirt.org/releases//node-base/alpha/rpm/EL/6\n" ;\
GLUSTER_REPO_LINE="repo --name=gluster-3.4 --baseurl=http://download.gluster.org/pub/gluster/glusterfs/3.4/3.4.0/CentOS/epel-6Server/x86_64/\n" ;\
echo "${CENTOS_REPO_LINE}" > repos.ks ;\
echo "${UPDATES_REPO_LINE}" >> repos.ks ;\
echo "${EPEL_REPO_LINE}" >> repos.ks ;\
elif [ -n "" ]; then \
OVIRT_STABLE_REPO_LINE="repo --name=ovirt-stable-repo --baseurl=http://ovirt.org/releases//stable/rpm/Fedora/\n" ;\
OVIRT_NIGHTLY_REPO_LINE="repo --name=ovirt-nightly-repo --baseurl=http://ovirt.org/releases//nightly/rpm/Fedora/\n" ;\
OVIRT_BETA_REPO_LINE="repo --name=ovirt-beta-repo --baseurl=http://ovirt.org/releases//beta/rpm/Fedora/\n" ;\
OVIRT_ALPHA_REPO_LINE="repo --name=ovirt-alpha-repo --baseurl=http://ovirt.org/releases//alpha/rpm/Fedora/\n" ;\
NODE_STABLE_REPO_LINE="repo --name=node-stable-repo --baseurl=http://ovirt.org/releases//node-base/stable/rpm/Fedora/\n" ;\
NODE_NIGHTLY_REPO_LINE="repo --name=node-nightly-repo --baseurl=http://ovirt.org/releases//node-base/nightly/rpm/Fedora/\n" ;\
NODE_BETA_REPO_LINE="repo --name=node-beta-repo --baseurl=http://ovirt.org/releases//node-base/beta/rpm/Fedora/\n" ;\
NODE_ALPHA_REPO_LINE="repo --name=node-alpha-repo --baseurl=http://ovirt.org/releases//node-base/alpha/rpm/Fedora/\n" ;\
if [ 0 == 020 ]; then \
FEDORA_REPO=rawhide ;\
FEDORA_REPO_LOC="--mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=x86_64" ;\
elif [ 0 == 020 ]; then \
FEDORA_REPO=f ;\
FEDORA_REPO_LOC="--mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-&arch=x86_64" ;\
UPDATE_REPO_LINE="repo --name=${FEDORA_REPO}-updates-testing --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=updates-testing-f&arch=x86_64\n" ;\
VIRT_PREVIEW_LINE="repo --name=${FEDORA_REPO}-virt-preview --baseurl=http://fedorapeople.org/groups/virt/virt-preview/fedora-/x86_64\n" ;\
else \
FEDORA_REPO=f ;\
FEDORA_REPO_LOC="--mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-&arch=x86_64" ;\
UPDATE_REPO_LINE="repo --name=${FEDORA_REPO}-updates --mirrorlist=http://mirrors.fedoraproject.org/mirrorlist?repo=updates-released-f&arch=x86_64\n" ;\
VIRT_PREVIEW_LINE="repo --name=${FEDORA_REPO}-virt-preview --baseurl=http://fedorapeople.org/groups/virt/virt-preview/fedora-/x86_64\n" ;\
fi ;\
echo "repo --name=${FEDORA_REPO} ${FEDORA_REPO_LOC}" > repos.ks ;\
printf "${UPDATE_REPO_LINE}" >> repos.ks ;\
printf "${VIRT_PREVIEW_LINE}" >> repos.ks ;\
else \
echo "# NODE_REPO_URL=" > repos.ks ;\
for repo in ; do \
echo "repo --name=repo${i} --baseurl=${repo}" >> repos.ks ;\
i=${i}_ ;\
done ;\
fi ;\
printf "${NODE_STABLE_REPO_LINE}" >> repos.ks ;\
printf "${GLUSTER_REPO_LINE}" >> repos.ks ;\
if [ "${MANAGEMENT}" == "OVIRT" ]; then \
printf "${OVIRT_STABLE_REPO_LINE}" >> repos.ks ;\
fi ;\
if [ "${BUILD_TYPE}" == "NIGHTLY" ]; then \
if [ "${MANAGEMENT}" == "OVIRT" ]; then \
printf "${OVIRT_NIGHTLY_REPO_LINE}" >> repos.ks ;\
printf "${OVIRT_ALPHA_REPO_LINE}" >> repos.ks ;\
printf "${OVIRT_BETA_REPO_LINE}" >> repos.ks ;\
fi ;\
printf "${NODE_NIGHTLY_REPO_LINE}" >> repos.ks ;\
printf "${NODE_ALPHA_REPO_LINE}" >> repos.ks ;\
printf "${NODE_BETA_REPO_LINE}" >> repos.ks ;\
elif [ "${BUILD_TYPE}" == "ALPHA" ]; then \
if [ "${MANAGEMENT}" == "OVIRT" ]; then \
printf "${OVIRT_ALPHA_REPO_LINE}" >> repos.ks ;\
printf "${OVIRT_BETA_REPO_LINE}" >> repos.ks ;\
fi ;\
printf "${NODE_BETA_REPO_LINE}" >> repos.ks ;\
printf "${NODE_ALPHA_REPO_LINE}" >> repos.ks ;\
elif [ "${BUILD_TYPE}" == "BETA" ]; then \
if [ "${MANAGEMENT}" == "OVIRT" ]; then \
printf "${OVIRT_BETA_REPO_LINE}" >> repos.ks ;\
fi ;\
printf "${NODE_BETA_REPO_LINE}" >> repos.ks ;\
fi ;\
)
( \
echo "PRODUCT='"oVirt Node Hypervisor"'" ;\
echo "PRODUCT_SHORT='"oVirt Node Hypervisor"'" ;\
echo "PACKAGE=ovirt-node-iso" ;\
echo "VERSION=3.1.0" ;\
echo "RELEASE=0.999.999.20140228103958gitc9408f8.1258.el6" ;\
) > version.ks
ksflatten -c ovirt-node-image.ks -o ovirt-node-iso.ks
./node-creator ovirt-node-iso.ks
You must run livecd-creator as root
ERROR: ISO build failed.
make: *** [iso] Error 1
Build step 'Execute shell' marked build as failure
Archiving artifacts
More information about the node-patches
mailing list