No subject
Thu Aug 30 15:58:33 EDT 2012
http://f18aio ---> ok
click on webadmin portal link ---> ko
Firefox can't establish a connection to the server at f18aio.
http://192.168.122.160 --> ko
Firefox can't establish a connection to the server at 192.168.122.160
If I ssh -X f18aio from host and run firefox on vm side:
http://f18aio ---> ok
click on webadmin portal link ---> ok
(see screenshot at
https://docs.google.com/open?id=0BwoPbcrMv8mvZzdsQnFMU0RuUGs
)
The same if I use 192.168.122.160
DO I have to set up anything at vm side of my host side?
At this moment on it I see I have the ip address put on ovirtmgmt network
that the deploy step made available:
[g.cecchi at f18aio ~]$ ip addr list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master
ovirtmgmt state UP qlen 1000
link/ether 52:54:00:b0:6c:5f brd ff:ff:ff:ff:ff:ff
inet6 fe80::5054:ff:feb0:6c5f/64 scope link
valid_lft forever preferred_lft forever
3: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP
link/ether 52:54:00:b0:6c:5f brd ff:ff:ff:ff:ff:ff
inet 192.168.122.160/24 brd 192.168.122.255 scope global ovirtmgmt
inet6 fe80::5054:ff:feb0:6c5f/64 scope link
valid_lft forever preferred_lft forever
5: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 06:95:56:60:84:1a brd ff:ff:ff:ff:ff:ff
6: bond0: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue
state DOWN
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
7: bond4: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue
state DOWN
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
[g.cecchi at f18aio ~]$ cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: load balancing (round-robin)
MII Status: down
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
[g.cecchi at f18aio ~]$ cat /proc/net/bonding/bond4
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: load balancing (round-robin)
MII Status: down
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
[root at f18aio ~]# brctl show
bridge name bridge id STP enabled interfaces
;vdsmdummy; 8000.000000000000 no
ovirtmgmt 8000.525400b06c5f no eth0
Thanks in advance,
Gianluca
--f46d042ef525ce7b7d04d1218f43
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr">On Wed, Dec 12, 2012 at 11:29 PM, Jason Brooks wrote:<br><=
div class=3D"gmail_extra"><div class=3D"gmail_quote"><blockquote class=3D"g=
mail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left-width:1px;border-=
left-color:rgb(204,204,204);border-left-style:solid;padding-left:1ex">
<div class=3D"im"><br>
> > > > the same if I run from command line:<br>
> > > > /sbin/tuned-adm profile virtual-host<br>
> ><br>
> ><br>
> > I was having this same issue w/ F18 w/ all updates applied and<br=
>
> > ovirt<br>
> > 3.2 from the new 3.2-alpha repo. I did a "yum downgrade tune=
d" and<br>
> > the install completed successfully.<br>
> ><br>
> > Now I just have to figure out why my host is non-operational...<b=
r>
> ><br>
> > Jason<br>
><br>
> I suggest you perform host deployment again.<br>
<br>
</div>Thanks, that worked. The ovirtmgmt bridge wasn't created the firs=
t time around, now I'm up.<br>
<div class=3D""><div class=3D"h5"><br></div></div></blockquote><div><br></d=
iv><div style>Hello, =C2=A0had again time to come back on this today.</div>=
<div style>So I updated my f18 vm with ovirt-nightly repo and then engine-c=
leanup and engine-setup again.</div>
<div style>and=C2=A0I got the usual error on timeout when first deploying h=
ost.</div><div style><br></div><div style>But I'm able to connect from =
my host to webadmin portal on my vm (f18aio)</div><div style>=C2=A0</div><d=
iv style>
After downgrade of tuned-adm it worked for me too the re-deploy of the host=
from the gui.</div><div style><br></div><div style>from</div><div style><d=
iv>Dec 11 00:58:09 Updated: tuned-2.1.1-1.fc18.noarch</div><div><br></div>
<div style>to</div><div style><div>Dec 18 13:00:14 Installed: tuned-2.0.1-4=
.fc18.noarch</div><div><br></div></div></div><div style>I think it was the =
deploy step that caused also the vm (oVirt node deployed from itself...) to=
restart.</div>
<div style>And now I have this situation I would like to fix:</div><div sty=
le><br></div><div style>my vm is f18aio with ip 192.1681.122.160</div><div =
style>On my f17 host I have in /etc/hosts</div><div style>192.168.122.160 f=
18aio.localdomain.local f18aio<br>
</div><div style><br></div><div style>so that dnsmask lets me use firefox o=
n host to connect to webadmin portal on vm</div><div style>But after the su=
ccessful deploy I'm not able anymore to connect correctly as before to =
admin portal....</div>
<div style><br></div><div style>From host:</div><div style><br></div><div s=
tyle><a href=3D"http://f18aio">http://f18aio</a> ---> ok</div><div style=
><br></div><div style>click on webadmin portal link ---> =C2=A0ko</div><=
div style>
Firefox can't establish a connection to the server at f18aio.<br></div>=
<div style><br></div><div style><a href=3D"http://192.168.122.160">http://1=
92.168.122.160</a> -->=C2=A0ko</div><div style>Firefox can't establi=
sh a connection to the server at=C2=A0192.168.122.160<br>
</div><div style><br></div><div style>If I ssh -X f18aio from host and run =
firefox on vm side:</div><div style><br></div><div style><a href=3D"http://=
f18aio">http://f18aio</a> ---> ok<br></div><div style><br></div><div sty=
le>
click on webadmin portal link ---> =C2=A0ok<br></div><div style>(see scr=
eenshot at</div><div style><a href=3D"https://docs.google.com/open?id=3D0Bw=
oPbcrMv8mvZzdsQnFMU0RuUGs">https://docs.google.com/open?id=3D0BwoPbcrMv8mvZ=
zdsQnFMU0RuUGs</a><br>
</div><div style>)</div><div style><br></div><div style>The same if I use 1=
92.168.122.160</div><div style><br></div><div style><div><br class=3D"">DO =
I have to set up anything at vm side of my host side?</div><div>At this mom=
ent on it I see I have the ip address put on=C2=A0ovirtmgmt network that th=
e deploy step made available:</div>
<div><br></div></div><div style><div>[g.cecchi at f18aio ~]$ ip addr list</div=
><div>1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNK=
NOWN=C2=A0</div><div>=C2=A0 =C2=A0 link/loopback 00:00:00:00:00:00 brd 00:0=
0:00:00:00:00</div>
<div>=C2=A0 =C2=A0 inet <a href=3D"http://127.0.0.1/8">127.0.0.1/8</a> scop=
e host lo</div><div>=C2=A0 =C2=A0 inet6 ::1/128 scope host=C2=A0</div><div>=
=C2=A0 =C2=A0 =C2=A0 =C2=A0valid_lft forever preferred_lft forever</div><di=
v>2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fas=
t master ovirtmgmt state UP qlen 1000</div>
<div>=C2=A0 =C2=A0 link/ether 52:54:00:b0:6c:5f brd ff:ff:ff:ff:ff:ff</div>=
<div>=C2=A0 =C2=A0 inet6 fe80::5054:ff:feb0:6c5f/64 scope link=C2=A0</div><=
div>=C2=A0 =C2=A0 =C2=A0 =C2=A0valid_lft forever preferred_lft forever</div=
><div>3: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc =
noqueue state UP=C2=A0</div>
<div>=C2=A0 =C2=A0 link/ether 52:54:00:b0:6c:5f brd ff:ff:ff:ff:ff:ff</div>=
<div>=C2=A0 =C2=A0 inet <a href=3D"http://192.168.122.160/24">192.168.122.1=
60/24</a> brd 192.168.122.255 scope global ovirtmgmt</div><div>=C2=A0 =C2=
=A0 inet6 fe80::5054:ff:feb0:6c5f/64 scope link=C2=A0</div>
<div>=C2=A0 =C2=A0 =C2=A0 =C2=A0valid_lft forever preferred_lft forever</di=
v><div>5: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop stat=
e DOWN=C2=A0</div><div>=C2=A0 =C2=A0 link/ether 06:95:56:60:84:1a brd ff:ff=
:ff:ff:ff:ff</div><div>6: bond0: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,=
UP> mtu 1500 qdisc noqueue state DOWN=C2=A0</div>
<div>=C2=A0 =C2=A0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff</div>=
<div>7: bond4: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qd=
isc noqueue state DOWN=C2=A0</div><div>=C2=A0 =C2=A0 link/ether 00:00:00:00=
:00:00 brd ff:ff:ff:ff:ff:ff</div>
<div><br></div><div>[g.cecchi at f18aio ~]$ cat /proc/net/bonding/bond0<br></d=
iv><div>Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)</div><div>=
<br></div><div>Bonding Mode: load balancing (round-robin)</div><div>MII Sta=
tus: down</div>
<div>MII Polling Interval (ms): 0</div><div>Up Delay (ms): 0</div><div>Down=
Delay (ms): 0</div><div><br></div><div>[g.cecchi at f18aio ~]$ cat /proc/net/=
bonding/bond4</div><div>Ethernet Channel Bonding Driver: v3.7.1 (April 27, =
2011)</div>
<div><br></div><div>Bonding Mode: load balancing (round-robin)</div><div>MI=
I Status: down</div><div>MII Polling Interval (ms): 0</div><div>Up Delay (m=
s): 0</div><div>Down Delay (ms): 0</div><div><br></div><div><div>[root at f18a=
io ~]# brctl show</div>
<div>bridge name<span class=3D"" style=3D"white-space:pre"> </span>bridge i=
d<span class=3D"" style=3D"white-space:pre"> </span>STP enabled<span class=
=3D"" style=3D"white-space:pre"> </span>interfaces</div><div>;vdsmdummy;<sp=
an class=3D"" style=3D"white-space:pre"> </span>8000.000000000000<span cla=
ss=3D"" style=3D"white-space:pre"> </span>no<span class=3D"" style=3D"white=
-space:pre"> </span></div>
<div>ovirtmgmt<span class=3D"" style=3D"white-space:pre"> </span>8000.5254=
00b06c5f<span class=3D"" style=3D"white-space:pre"> </span>no<span class=3D=
"" style=3D"white-space:pre"> </span>eth0</div></div><div><br></div><div><=
br></div>
</div><div style>Thanks in advance,</div><div style>Gianluca</div><div styl=
e><br></div><div>=C2=A0</div></div></div></div>
--f46d042ef525ce7b7d04d1218f43--
More information about the Users
mailing list