[Users] Pxeboot - pwd/login issue
Li, David
LiD at cloudshield.com
Fri Feb 10 19:22:37 UTC 2012
ok, I have already patched like this. Hope this is ok:
[lid at FC16-1 ovirt-node]$ git fetch http://gerrit.ovirt.org/p/ovirt-node refs/changes/07/1807/1 && git checkout FETCH_HEAD
remote: Counting objects: 57, done
remote: Finding sources: 100% (39/39)
remote: Total 39 (delta 28), reused 39 (delta 28)
Unpacking objects: 100% (39/39), done.
>From http://gerrit.ovirt.org/p/ovirt-node
* branch refs/changes/07/1807/1 -> FETCH_HEAD
Warning: you are leaving 1 commit behind, not connected to
any of your branches:
07d8a0f Add archipel option with stateless boot
If you want to keep them by creating a new branch, this may be a good time
to do so with:
git branch new_branch_name 07d8a0fc5007c5f74f9421b7a565cd2db2d9e772
HEAD is now at a94c33c... fix ssh_pwauth handling in autoinstall
[lid at FC16-1 ovirt-node]$ git fetch http://gerrit.ovirt.org/p/ovirt-node refs/changes/08/1808/1 && git checkout FETCH_HEAD
remote: Counting objects: 62, done
remote: Finding sources: 100% (44/44)
remote: Total 44 (delta 32), reused 44 (delta 32)
Unpacking objects: 100% (44/44), done.
>From http://gerrit.ovirt.org/p/ovirt-node
* branch refs/changes/08/1808/1 -> FETCH_HEAD
Warning: you are leaving 5 commits behind, not connected to
any of your branches:
a94c33c fix ssh_pwauth handling in autoinstall
893a095 Add archipel option with stateless boot
a1053cb regenerate repos.ks when building iso
237870c Add network configure before dropping into emergency shell
5bb3613 add error handling to recent rhn.py commit
If you want to keep them by creating a new branch, this may be a good time
to do so with:
git branch new_branch_name a94c33c6d0957391a48ab0cd2e78e4a15e5ad80e
HEAD is now at 3daa6d3... when stateless, don't execute store_config and remove_config
[lid at FC16-1 ovirt-node]$
ONE MORE QUESTION: do I need to run 'make publish' before make iso?
- David
________________________________________
From: Mike Burns [mburns at redhat.com]
Sent: Friday, February 10, 2012 11:19 AM
To: Li, David
Cc: users at ovirt.org
Subject: Re: [Users] Pxeboot - pwd/login issue
On Fri, 2012-02-10 at 11:09 -0800, Li, David wrote:
> Ok, what's the right cmd to get both? Do I have to start from scratch?
No need to start from scratch.
First, figure out the name of the remote.
$ git remote show
It will most likely return just one entry, and it's probably named
origin. If it's something other than origin, then just substitute in
the following commands:
$ git fetch origin
$ git reset --hard origin/master
$ git fetch http://gerrit.ovirt.org/p/ovirt-node refs/changes/07/1807/1 && git cherry-pick FETCH_HEAD
$ git fetch http://gerrit.ovirt.org/p/ovirt-node refs/changes/08/1808/1 && git cherry-pick FETCH_HEAD
$ git status # should show something like:
# On branch master
# Your branch is ahead of 'origin/master' by 2 commits.
Now you should be good to build.
Mike
>
> >-----Original Message-----
> >From: Mike Burns [mailto:mburns at redhat.com]
> >Sent: Friday, February 10, 2012 11:01 AM
> >To: Li, David
> >Cc: users at ovirt.org
> >Subject: Re: [Users] Pxeboot - pwd/login issue
> >
> >On Fri, 2012-02-10 at 10:49 -0800, Li, David wrote:
> >> Mike,
> >> I think I got a glimpse of the error message - something like "persistent
> >storage not available" after I tried to login with the new passwd.
> >> Does this make sense?
> >
> >Try this patch with the other one I just sent:
> >
> >http://gerrit.ovirt.org/1808
> >
> >Mike
> >>
> >> David
> >>
> >>
> >> >-----Original Message-----
> >> >From: Mike Burns [mailto:mburns at redhat.com]
> >> >Sent: Friday, February 10, 2012 7:37 AM
> >> >To: Li, David
> >> >Cc: users at ovirt.org
> >> >Subject: RE: [Users] Pxeboot - pwd/login issue
> >> >
> >> >On Fri, 2012-02-10 at 07:17 -0800, Li, David wrote:
> >> >> Hi Mike,
> >> >>
> >> >> I ran into the login/pwd problem again with this new build. Kernel
> >> >> option adminpw worked but only for a short time. I was asked to
> >> >> change pwd immediately after login but then rejected again after I did
> >that.
> >> >> There was an short-lived error message on the screen but I wasn't
> >> >> able to capture it.
> >> >
> >> >You can try booting with "BOOTIF=eth0 ssh_pwauth=1" in the command
> >line.
> >> >This will configure networking and enable SSH password authentication.
> >> >Then you can ssh admin@<your host> and it will show you the error.
> >> >
> >> >>
> >> >> I tried the latest from archipel source and it worked without
> >> >> password issue. I pulled it from:
> >> >>
> >> >> git clone https://github.com/primalmotion/Archipel.git
> >> >
> >> >I'm using git://github.com/primalmotion/Node.git
> >> >
> >> >The only differences I see between the 2 are some minor formatting
> >> >and conditional changes in recipe/Makefile.am and a couple patches
> >> >that were pushed since the github repo was updated. These patches
> >> >are all on the gerrit.ovirt.org side.
> >> >
> >> >Note: there is an incompatible change that was merged into master
> >> >this morning. I'm working on a rebase of the archipel stuff now to include
> >it.
> >> >
> >> >Mike
> >> >
> >> >>
> >> >> There might be a few updates right after you pulled it last time.
> >> >>
> >> >> Would you mind merge the new updates into ovirt node again?
> >> >>
> >> >> Thanks.
> >> >>
> >> >> David
> >> >>
> >> >>
> >> >> >-----Original Message-----
> >> >> >From: Mike Burns [mailto:mburns at redhat.com]
> >> >> >Sent: Thursday, February 09, 2012 5:10 PM
> >> >> >To: Li, David
> >> >> >Cc: Perry Myers; users at ovirt.org
> >> >> >Subject: Re: [Users] Pxeboot
> >> >> >
> >> >> >On Thu, 2012-02-09 at 17:05 -0800, Li, David wrote:
> >> >> >> Mike,
> >> >> >> Built it finally!
> >> >> >> Thanks a lot!
> >> >> >
> >> >> >Woot!
> >> >> >
> >> >> >>
> >> >> >> >-----Original Message-----
> >> >> >> >From: Mike Burns [mailto:mburns at redhat.com]
> >> >> >> >Sent: Thursday, February 09, 2012 4:18 PM
> >> >> >> >To: Li, David
> >> >> >> >Cc: Perry Myers; users at ovirt.org
> >> >> >> >Subject: Re: [Users] Pxeboot
> >> >> >> >
> >> >> >> >On Thu, 2012-02-09 at 15:50 -0800, Li, David wrote:
> >> >> >> >> MIke,
> >> >> >> >>
> >> >> >> >> Got something new this time in make publish:
> >> >> >> >>
> >> >> >> >> /bin/sh: -c: line 36: syntax error near unexpected token `)'
> >> >> >> >> /bin/sh: -c: line 36: `)'
> >> >> >> >> make[1]: *** [repos.ks] Error 1
> >> >> >> >> make[1]: Leaving directory
> >> >> >> >> `/home/lid/workspace/ovirt/node-archipel-
> >> >> >> >2.2.2/ovirt-node/recipe'
> >> >> >> >> make: *** [distdir] Error 1
> >> >> >> >>
> >> >> >> >> [lid at FC16-1 ovirt-node]$ echo $OVIRT_CACHE_DIR
> >> >> >$OVIRT_LOCAL_REPO
> >> >> >> >> /home/lid/ovirt-cache file:///home/lid/ovirt-cache/ovirt
> >> >> >> >> [lid at FC16-1 ovirt-node]$
> >> >> >> >
> >> >> >> >Oops, bad merge on my part.
> >> >> >> >
> >> >> >> >$ git reset --hard origin/master #sets you back to head of the
> >> >> >> >master branch $ git fetch http://gerrit.ovirt.org/p/ovirt-node
> >> >> >> >refs/changes/38/1738/3 && git cherry-pick FETCH_HEAD # checks
> >> >> >> >out the
> >> >> >new version of the patch set.
> >> >> >> >
> >> >> >> >Mike
> >> >> >> >
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> - David
> >> >> >> >> ________________________________________
> >> >> >> >> From: Mike Burns [mburns at redhat.com]
> >> >> >> >> Sent: Thursday, February 09, 2012 2:12 PM
> >> >> >> >> To: Li, David
> >> >> >> >> Cc: Perry Myers; users at ovirt.org
> >> >> >> >> Subject: Re: [Users] Pxeboot
> >> >> >> >>
> >> >> >> >> On Thu, 2012-02-09 at 13:34 -0800, Li, David wrote:
> >> >> >> >> > Mike,
> >> >> >> >> >
> >> >> >> >> > It seems it needs couple vdsm pkgs:
> >> >> >> >> >
> >> >> >> >> > ./node-creator ovirt-node-image.ks Error creating Live CD :
> >> >> >> >> > Failed to find package 'vdsm-cli' : No
> >> >> >> >> > package(s) available to install mv ovirt-node-image.iso
> >> >> >> >> > ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
> >> >> >> >> > mv: cannot stat `ovirt-node-image.iso': No such file or
> >> >> >> >> > directory
> >> >> >> >> > make: *** [ovirt-node-image.iso] Error 1
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > can I remove them from ks files?
> >> >> >> >>
> >> >> >> >> Not if you want to use ovirt-node with ovirt-engine. There
> >> >> >> >> was a bug in that patch set that is fixed in patch set 2
> >> >> >> >> (along with the bad ===== package). I hadn't pulled the
> >> >> >> >> patch set together and uploaded to gerrit yet, but it's there now.
> >> >> >> >>
> >> >> >> >> git fetch http://gerrit.ovirt.org/p/ovirt-node
> >> >> >> >> refs/changes/38/1738/2 && git checkout FETCH_HEAD
> >> >> >> >>
> >> >> >> >> This should fix the problem.
> >> >> >> >>
> >> >> >> >> Mike
> >> >> >> >>
> >> >> >> >> >
> >> >> >> >> > - David
> >> >> >> >> > ________________________________________
> >> >> >> >> > From: Mike Burns [mburns at redhat.com]
> >> >> >> >> > Sent: Thursday, February 09, 2012 12:07 PM
> >> >> >> >> > To: Li, David
> >> >> >> >> > Cc: Perry Myers; users at ovirt.org
> >> >> >> >> > Subject: Re: [Users] Pxeboot
> >> >> >> >> >
> >> >> >> >> > On Thu, 2012-02-09 at 11:52 -0800, Li, David wrote:
> >> >> >> >> > > It's still the same error:
> >> >> >> >> > >
> >> >> >> >> > > [lid at FC16-1 ovirt-node]$ cd recipe/
> >> >> >> >> > > [lid at FC16-1 recipe]$ make ovirt-node-image.iso ( \
> >> >> >> >> > > echo "PRODUCT='"oVirt Node Hypervisor"'" ;\
> >> >> >> >> > > echo "PRODUCT_SHORT='"oVirt Node Hypervisor"'" ;\
> >> >> >> >> > > echo "PACKAGE=ovirt-node-image" ;\
> >> >> >> >> > > echo "VERSION=2.2.3" ;\
> >> >> >> >> > > echo "RELEASE=0.1fc16.git16688ea" ;\
> >> >> >> >> > > ) > version.ks
> >> >> >> >> > > ./node-creator ovirt-node-image.ks Error creating Live CD :
> >> >> >> >> > > Failed to find package '=======' : No package(s)
> >> >> >> >> > > available to install mv ovirt-node-image.iso
> >> >> >> >> > > ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
> >> >> >> >> > > mv: cannot stat `ovirt-node-image.iso': No such file or
> >> >> >> >> > > directory
> >> >> >> >> > > make: *** [ovirt-node-image.iso] Error 1
> >> >> >> >> > > [lid at FC16-1 recipe]$ echo $OVIRT_LOCAL_REPO
> >> >> >> >> > > file:///home/lid/ovirt-cache/ovirt
> >> >> >> >> > > [lid at FC16-1 recipe]$ ll /home/lid/ovirt-cache/ovirt/
> >> >> >> >> > > total
> >> >> >> >> > > 12 drwxr-xr-x. 2 lid lid 4096 Feb 9 11:10 noarch
> >> >> >> >> > > drwxrwxr-x. 2 lid lid 4096 Feb 9 11:10 repodata drwxrwxr-x.
> >> >> >> >> > > 2 lid lid 4096 Feb 9
> >> >> >> >> > > 11:10 src
> >> >> >> >> >
> >> >> >> >> > That's a bug in the patch. edit recipe/common-pkgs.ks and
> >> >> >> >> > remove the last line which is "======="
> >> >> >> >> >
> >> >> >> >> > Mike
> >> >> >> >> > >
> >> >> >> >> > >
> >> >> >> >> > > Did make publish store the rpms in $OVIRT_LOCAL_REPO?
> >> >> >> >> > >
> >> >> >> >> > > - David
> >> >> >> >> > > ________________________________________
> >> >> >> >> > > From: Mike Burns [mburns at redhat.com]
> >> >> >> >> > > Sent: Thursday, February 09, 2012 11:44 AM
> >> >> >> >> > > To: Li, David
> >> >> >> >> > > Cc: Perry Myers; users at ovirt.org
> >> >> >> >> > > Subject: RE: [Users] Pxeboot
> >> >> >> >> > >
> >> >> >> >> > > On Thu, 2012-02-09 at 11:40 -0800, Li, David wrote:
> >> >> >> >> > > > The error seems a little stubborn.
> >> >> >> >> > > >
> >> >> >> >> > > > [lid at FC16-1 recipe]$ echo $OVIRT_LOCAL_REPO
> >> >> >> >> > > > file://home/lid/ovirt-cache/ovirt
> >> >> >> >> > >
> >> >> >> >> > > You need 3 slashes. file:///home/lid/ovirt-cache/ovirt
> >> >> >> >> > >
> >> >> >> >> > > > [lid at FC16-1 recipe]$ make ovirt-node-image.iso ( \
> >> >> >> >> > > > echo "PRODUCT='"oVirt Node Hypervisor"'" ;\
> >> >> >> >> > > > echo "PRODUCT_SHORT='"oVirt Node Hypervisor"'" ;\
> >> >> >> >> > > > echo "PACKAGE=ovirt-node-image" ;\
> >> >> >> >> > > > echo "VERSION=2.2.3" ;\
> >> >> >> >> > > > echo "RELEASE=0.1fc16.git16688ea" ;\
> >> >> >> >> > > > ) > version.ks
> >> >> >> >> > > > ./node-creator ovirt-node-image.ks Error creating Live CD :
> >> >> >> >> > > > Unable to download from repo : Cannot retrieve
> >> >> >> >> > > > repository metadata (repomd.xml) for repository: local.
> >> >> >> >> > > > Please verify its path and try again mv
> >> >> >> >> > > > ovirt-node-image.iso
> >> >> >> >> > > > ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
> >> >> >> >> > > > mv: cannot stat `ovirt-node-image.iso': No such file or
> >> >> >> >> > > > directory
> >> >> >> >> > > > make: *** [ovirt-node-image.iso] Error 1
> >> >> >> >> > > >
> >> >> >> >> > > > There is also a pop-up window: Unable to open a folder
> >> >> >> >> > > > for _ovirt-node-imag
> >> >> >> >> > > >
> >> >> >> >> > > > maybe it's looking at the wrong place?
> >> >> >> >> > > >
> >> >> >> >> > > >
> >> >> >> >> > > > - David
> >> >> >> >> > > > ________________________________________
> >> >> >> >> > > > From: Mike Burns [mburns at redhat.com]
> >> >> >> >> > > > Sent: Thursday, February 09, 2012 11:15 AM
> >> >> >> >> > > > To: Li, David
> >> >> >> >> > > > Cc: Perry Myers; users at ovirt.org
> >> >> >> >> > > > Subject: RE: [Users] Pxeboot
> >> >> >> >> > > >
> >> >> >> >> > > > On Thu, 2012-02-09 at 10:57 -0800, Li, David wrote:
> >> >> >> >> > > > > ok, that's my bad:)
> >> >> >> >> > > > >
> >> >> >> >> > > > > Ran into error at the last iso build step:
> >> >> >> >> > > > >
> >> >> >> >> > > > > Start building ISO image....
> >> >> >> >> > > > > ( \
> >> >> >> >> > > > > echo "PRODUCT='"oVirt Node Hypervisor"'" ;\
> >> >> >> >> > > > > echo "PRODUCT_SHORT='"oVirt Node Hypervisor"'" ;\
> >> >> >> >> > > > > echo "PACKAGE=ovirt-node-image" ;\
> >> >> >> >> > > > > echo "VERSION=2.2.3" ;\
> >> >> >> >> > > > > echo "RELEASE=0.1.fc16.git16688ea" ;\
> >> >> >> >> > > > > ) > version.ks
> >> >> >> >> > > > > ./node-creator ovirt-node-image.ks Error creating Live CD :
> >> >> >> >> > > > > Unable to download from repo : Cannot retrieve
> >> >> >> >> > > > > repository metadata (repomd.xml) for repository: local.
> >> >> >> >> > > > > Please verify its path and try again mv
> >> >> >> >> > > > > ovirt-node-image.iso
> >> >> >> >> > > > > ovirt-node-image-2.2.3-0.1.fc16.git16688ea.iso
> >> >> >> >> > > > > mv: cannot stat `ovirt-node-image.iso': No such file
> >> >> >> >> > > > > or directory
> >> >> >> >> > > > > make: *** [ovirt-node-image.iso] Error 1
> >> >> >> >> > > >
> >> >> >> >> > > > IIRC, this is usually because you have OVIRT_LOCAL_REPO
> >> >> >> >> > > > defined, but not correctly. It needs to be like this:
> >> >> >> >> > > > file:///home/mburns/rpmbuild/RPMS
> >> >> >> >> > > >
> >> >> >> >> > > > Ok, I just looked at the Node Building page, and it
> >> >> >> >> > > > needs some
> >> >> >updates.
> >> >> >> >> > > > Try this from the base directory of the git repo
> >> >> >> >> > > >
> >> >> >> >> > > > $ export OVIRT_CACHE_DIR=${HOME}/ovirt-cache
> >> >> >> >> > > > $ export
> >> >> >> >> > > > OVIRT_LOCAL_REPO=file://${OVIRT_CACHE_DIR}/ovirt
> >> >> >> >> > > > $ ./autogen.sh --with-image-minimizer $ make publish
> >> >> >> >> > > > #this builds the rpms and puts them in
> >> >> >> >> > > > ${OVIRT_CACHE_DIR} $ cd recipe $ make
> >> >> >> >> > > > ovirt-node-image.iso
> >> >> >> >> > > >
> >> >> >> >> > > > Mike
> >> >> >> >> > > > >
> >> >> >> >> > > > >
> >> >> >> >> > > > >
> >> >> >> >> > > > > I wonder which repo my machine is lacking?
> >> >> >> >> > > > >
> >> >> >> >> > > > > - David
> >> >> >> >> > > > > ________________________________________
> >> >> >> >> > > > > From: Mike Burns [mburns at redhat.com]
> >> >> >> >> > > > > Sent: Thursday, February 09, 2012 10:02 AM
> >> >> >> >> > > > > To: Li, David
> >> >> >> >> > > > > Cc: Perry Myers; users at ovirt.org
> >> >> >> >> > > > > Subject: Re: [Users] Pxeboot
> >> >> >> >> > > > >
> >> >> >> >> > > > > On Thu, 2012-02-09 at 09:47 -0800, Li, David wrote:
> >> >> >> >> > > > > > Got an error:
> >> >> >> >> > > > > > [lid at FC16-1 ovirt-node]$ git fetch
> >> >> >> >> > > > > > http://gerrit.ovirt.org/
> >> >> >> >> > > > > > refs/changes/38/1738/1&&git cherry-pick FETCH_HEAD
> >> >> >> >> > > > > > fatal: http://gerrit.ovirt.org/info/refs not found:
> >> >> >> >> > > > > > did you run git
> >> >> >> >update-server-info on the server?
> >> >> >> >> > > > >
> >> >> >> >> > > > > Bad copy/paste:
> >> >> >> >> > > > >
> >> >> >> >> > > > > git fetch http://gerrit.ovirt.org/p/ovirt-node
> >> >> >> >> > > > > refs/changes/38/1738/1 && git cherry-pick FETCH_HEAD
> >> >> >> >> > > > > >
> >> >> >> >> > > > > > any ideas?
> >> >> >> >> > > > > >
> >> >> >> >> > > > > > - David
> >> >> >> >> > > > > > ________________________________________
> >> >> >> >> > > > > > From: Mike Burns [mburns at redhat.com]
> >> >> >> >> > > > > > Sent: Thursday, February 09, 2012 8:37 AM
> >> >> >> >> > > > > > To: Li, David
> >> >> >> >> > > > > > Cc: Perry Myers; users at ovirt.org
> >> >> >> >> > > > > > Subject: Re: [Users] Pxeboot
> >> >> >> >> > > > > >
> >> >> >> >> > > > > > On Thu, 2012-02-09 at 08:30 -0800, Li, David wrote:
> >> >> >> >> > > > > > > Mike,
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > > Two quick questions before I kick off a build:
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > > 1. Git errors. Do they matter?
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > > [lid at FC16-1 node-archipel-2.2.2]$ git clone
> >> >> >> >> > > > > > > http://gerrit.ovirt.org/p/ovirt-node.git
> >> >> >> >refs/changes/38/1738/1&&git checkout FETCH_HEAD Cloning into
> >> >> >> >refs/changes/38/1738/1...
> >> >> >> >> > > > > > > remote: Counting objects: 14791, done
> >> >> >> >> > > > > > > remote: Finding sources: 100% (14791/14791)
> >> >> >> >> > > > > > > remote: Total 14791 (delta 10855), reused 14778
> >> >> >> >> > > > > > > (delta
> >> >> >> >> > > > > > > 10855) Receiving objects: 100% (14791/14791),
> >> >> >> >> > > > > > > 16.92 MiB
> >> >> >> >> > > > > > > | 154
> >> >> >> >KiB/s, done.
> >> >> >> >> > > > > > > Resolving deltas: 100% (10855/10855), done.
> >> >> >> >> > > > > > > fatal: Not a git repository (or any of the parent
> >> >> >> >> > > > > > > directories): .git
> >> >> >> >> > > > > >
> >> >> >> >> > > > > > try this instead:
> >> >> >> >> > > > > >
> >> >> >> >> > > > > > git clone http://gerrit.ovirt.org/p/ovirt-node.git
> >> >> >> >> > > > > > cd ovirt-node
> >> >> >> >> > > > > > git fetch http://gerrit.ovirt.org/p/ovirt-node
> >> >> >> >> > > > > > refs/changes/38/1738/1 && git cherry-pick
> >> >> >> >> > > > > > FETCH_HEAD
> >> >> >> >> > > > > >
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > > 2. Build machine.
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > > I am using a x86_64 FC16 VM as the build machine.
> >> >> >> >> > > > > > > My target is
> >> >> >> >x86_64 Intel board. Is this ok?
> >> >> >> >> > > > > >
> >> >> >> >> > > > > > Should be fine.
> >> >> >> >> > > > > >
> >> >> >> >> > > > > > Mike
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > > - David
> >> >> >> >> > > > > > > ________________________________________
> >> >> >> >> > > > > > > From: Mike Burns [mburns at redhat.com]
> >> >> >> >> > > > > > > Sent: Thursday, February 09, 2012 8:16 AM
> >> >> >> >> > > > > > > To: Li, David
> >> >> >> >> > > > > > > Cc: Perry Myers; users at ovirt.org
> >> >> >> >> > > > > > > Subject: RE: [Users] Pxeboot
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > > On Thu, 2012-02-09 at 08:10 -0800, Li, David wrote:
> >> >> >> >> > > > > > > > Not sure where the boot log is since I can't login.
> >> >> >> >> > > > > > > >
> >> >> >> >> > > > > > > > I got the source from
> >> >> >> >> > > > > > > > https://github.com/primalmotion/archipel-node
> >> >> >> >> > > > > > > > and followed the build instructions in
> >> >> >> >> > > > > > > > http://ovirt.org/wiki/Node_Building
> >> >> >> >> > > > > > > >
> >> >> >> >> > > > > > > > maybe I should rebuild the iso from the ovirt
> >> >> >> >> > > > > > > > node source tree
> >> >> >> >as you have pulled in archipel changes yesterday. How do I do that?
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > > git fetch http://gerrit.ovirt.org/p/ovirt-node
> >> >> >> >> > > > > > > refs/changes/38/1738/1 && git checkout FETCH_HEAD
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > > That command will checkout the current version of
> >> >> >> >> > > > > > > the archipel-node changes. Then you can just
> >> >> >> >> > > > > > > follow the Node_Building process. Note that the
> >> >> >> >> > > > > > > changes aren't merged into master yet. I'm still
> >> >> >> >> > > > > > > in the process of reviewing
> >> >> >them.
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > > Mike
> >> >> >> >> > > > > > > >
> >> >> >> >> > > > > > > > - David
> >> >> >> >> > > > > > > >
> >> >> >> >> > > > > > > >
> >> >> >> >> > > > > > > > >-----Original Message-----
> >> >> >> >> > > > > > > > >From: Mike Burns [mailto:mburns at redhat.com]
> >> >> >> >> > > > > > > > >Sent: Thursday, February 09, 2012 7:22 AM
> >> >> >> >> > > > > > > > >To: Li, David
> >> >> >> >> > > > > > > > >Cc: Perry Myers; users at ovirt.org
> >> >> >> >> > > > > > > > >Subject: Re: [Users] Pxeboot
> >> >> >> >> > > > > > > > >
> >> >> >> >> > > > > > > > >On Thu, 2012-02-09 at 07:06 -0800, Li, David wrote:
> >> >> >> >> > > > > > > > >> Mike,
> >> >> >> >> > > > > > > > >>
> >> >> >> >> > > > > > > > >> I added adminpw as a kernel option. After
> >> >> >> >> > > > > > > > >> boot, I tried
> >> >> >> >"admin/abc123"
> >> >> >> >> > > > > > > > >> and "root/abc123" but not able to login.
> >> >> >> >> > > > > > > > >> Any idea?
> >> >> >> >> > > > > > > > >>
> >> >> >> >> > > > > > > > >
> >> >> >> >> > > > > > > > >Are there any errors in your build or boot logs?
> >> >> >> >> > > > > > > > >
> >> >> >> >> > > > > > > > >Mike
> >> >> >> >> > > > > > > > >
> >> >> >> >> > > > > > > > >> David
> >> >> >> >> > > > > > > > >>
> >> >> >> >> > > > > > > > >>
> >> >> >> >> > > > > > > > >> >-----Original Message-----
> >> >> >> >> > > > > > > > >> >From: Mike Burns [mailto:mburns at redhat.com]
> >> >> >> >> > > > > > > > >> >Sent: Wednesday, February 08, 2012 6:53 PM
> >> >> >> >> > > > > > > > >> >To: Li, David
> >> >> >> >> > > > > > > > >> >Cc: Perry Myers; users at ovirt.org
> >> >> >> >> > > > > > > > >> >Subject: Re: [Users] Pxeboot
> >> >> >> >> > > > > > > > >> >
> >> >> >> >> > > > > > > > >> >On Wed, 2012-02-08 at 17:11 -0800, Li, David
> >wrote:
> >> >> >> >> > > > > > > > >> >> Ok, I built an iso out of archipel and
> >> >> >> >> > > > > > > > >> >> pxebooted it with stateless option. Now
> >> >> >> >> > > > > > > > >> >I got a "localhost" login prompt. Any idea
> >> >> >> >> > > > > > > > >> >what should I put
> >> >> >> >in as user/pwd?
> >> >> >> >> > > > > > > > >> >> David
> >> >> >> >> > > > > > > > >> >
> >> >> >> >> > > > > > > > >> >You will need to pass a password in on the
> >> >> >> >> > > > > > > > >> >command line as well
> >> >> >> >> > > > > > > > >> >
> >> >> >> >> > > > > > > > >> >adminpw=<hashed_password>
> >> >> >> >> > > > > > > > >> >
> >> >> >> >> > > > > > > > >> >You can generate the hashed password using:
> >> >> >> >> > > > > > > > >> >
> >> >> >> >> > > > > > > > >> >$ openssl passwd
> >> >> >> >> > > > > > > > >> >
> >> >> >> >> > > > > > > > >> >Assuming the password was abc123
> >> >> >> >> > > > > > > > >> >
> >> >> >> >> > > > > > > > >> >$ openssl passwd abc123
> >> >> >> >> > > > > > > > >> >tKrQfufCbosr6
> >> >> >> >> > > > > > > > >> >
> >> >> >> >> > > > > > > > >> >adminpw=tKrQfufCbosr6
> >> >> >> >> > > > > > > > >> >
> >> >> >> >> > > > > > > > >> >Mike
> >> >> >> >> > > > > > > > >> >
> >> >> >> >> > > > > > > > >> >>
> >> >> >> >> > > > > > > > >> >> >-----Original Message-----
> >> >> >> >> > > > > > > > >> >> >From: Mike Burns
> >> >> >> >> > > > > > > > >> >> >[mailto:mburns at redhat.com]
> >> >> >> >> > > > > > > > >> >> >Sent: Wednesday, February 08, 2012 4:31
> >> >> >> >> > > > > > > > >> >> >PM
> >> >> >> >> > > > > > > > >> >> >To: Li, David
> >> >> >> >> > > > > > > > >> >> >Cc: Perry Myers; users at ovirt.org
> >> >> >> >> > > > > > > > >> >> >Subject: RE: [Users] Pxeboot
> >> >> >> >> > > > > > > > >> >> >
> >> >> >> >> > > > > > > > >> >> >On Wed, 2012-02-08 at 15:43 -0800, Li,
> >> >> >> >> > > > > > > > >> >> >David
> >> >wrote:
> >> >> >> >> > > > > > > > >> >> >> Ok, I think we are on the same page
> >> >> >> >> > > > > > > > >> >> >> now regarding
> >> >> >> >stateless node.
> >> >> >> >> > > > > > > > >> >> >> It looks like the achipel diff you
> >> >> >> >> > > > > > > > >> >> >> just pulled in might be able to do
> >> >> >> >> > > > > > > > >> >> >> this. But I can't quite make it out
> >> >> >> >> > > > > > > > >> >> >> what the kernel option should
> >> >> >> >> > > > > > > > >be.
> >> >> >> >> > > > > > > > >> >> >> Is it "stateless=1"?
> >> >> >> >> > > > > > > > >> >> >>
> >> >> >> >> > > > > > > > >> >> >
> >> >> >> >> > > > > > > > >> >> >stateless=1 or just stateless, both will work.
> >> >> >> >> > > > > > > > >> >> >
> >> >> >> >> > > > > > > > >> >> >
> >> >> >> >> > > > > > > > >> >> >> David
> >> >> >> >> > > > > > > > >> >> >>
> >> >> >> >> > > > > > > > >> >> >> >-----Original Message-----
> >> >> >> >> > > > > > > > >> >> >> >From: Mike Burns
> >> >> >> >> > > > > > > > >> >> >> >[mailto:mburns at redhat.com]
> >> >> >> >> > > > > > > > >> >> >> >Sent: Wednesday, February 08, 2012
> >> >> >> >> > > > > > > > >> >> >> >3:27 PM
> >> >> >> >> > > > > > > > >> >> >> >To: Li, David
> >> >> >> >> > > > > > > > >> >> >> >Cc: Perry Myers; users at ovirt.org
> >> >> >> >> > > > > > > > >> >> >> >Subject: Re: [Users] Pxeboot
> >> >> >> >> > > > > > > > >> >> >> >
> >> >> >> >> > > > > > > > >> >> >> >On Wed, 2012-02-08 at 15:19 -0800,
> >> >> >> >> > > > > > > > >> >> >> >Li, David
> >> >> >wrote:
> >> >> >> >> > > > > > > > >> >> >> >> Perry,
> >> >> >> >> > > > > > > > >> >> >> >>
> >> >> >> >> > > > > > > > >> >> >> >> I am glad you brought this up.
> >> >> >> >> > > > > > > > >> >> >> >> I 'd be perfectly happy to run the
> >> >> >> >> > > > > > > > >> >> >> >> root fs entirely in
> >> >> >> >RAM.
> >> >> >> >> > > > > > > > >> >> >> >> In fact that would
> >> >> >> >> > > > > > > > >> >> >> >be ideal for me. It's just I am not
> >> >> >> >> > > > > > > > >> >> >> >quite sure how to use pxeboot to achieve
> >this.
> >> >> >> >> > > > > > > > >> >> >> >>
> >> >> >> >> > > > > > > > >> >> >> >> I am doing a test now using the
> >> >> >> >> > > > > > > > >> >> >> >> tftpboot files
> >> >> >> >created from the iso.
> >> >> >> >> > > > > > > > >> >> >> >> As far as I see, the kernel boot
> >> >> >> >> > > > > > > > >> >> >> >> options
> >> >> >> >(pxelinux.cfg/default) has:
> >> >> >> >> > > > > > > > >> >> >> >>
> >> >> >> >> > > > > > > > >> >> >> >> root=live:/ovirt-node-image-2.2.2-1.1.
> >> >> >> >> > > > > > > > >> >> >> >> fc1 6.i so
> >> >> >> >> > > > > > > > >> >> >> >>
> >> >> >> >> > > > > > > > >> >> >> >> With this I can only pxeboot to the
> >> >> >> >> > > > > > > > >> >> >> >> intall screen. What should I use
> >> >> >> >> > > > > > > > >> >> >> >> to let the
> >> >> >> >> > > > > > > > >> >> >> >kernel mount the root fs in memory?
> >> >> >> >> > > > > > > > >> >> >> >Something like
> >> >> >> >> > > > > > > > >root=/dev/ram0?
> >> >> >> >> > > > > > > > >> >> >> >>
> >> >> >> >> > > > > > > > >> >> >> >> David
> >> >> >> >> > > > > > > > >> >> >> >
> >> >> >> >> > > > > > > > >> >> >> >It's not currently possible with ovirt-node.
> >> >> >> >> > > > > > > > >> >> >> >That's the whole stateless feature
> >> >> >> >> > > > > > > > >> >> >> >that we outlined. Once we actually
> >> >> >> >> > > > > > > > >> >> >> >have it implemented, it will be
> >> >> >> >> > > > > > > > >> >> >> >something along the lines of adding
> >> >> >> >> > > > > > > > >> >> >> >"stateless" to
> >> >> >> >> > > > > > > > >> >> >the kernel commandline.
> >> >> >> >> > > > > > > > >> >> >> >
> >> >> >> >> > > > > > > > >> >> >> >Mike
> >> >> >> >> > > > > > > > >> >> >> >>
> >> >> >> >> > > > > > > > >> >> >> >>
> >> >> >> >> > > > > > > > >> >> >> >> >-----Original Message-----
> >> >> >> >> > > > > > > > >> >> >> >> >From: Perry Myers
> >> >> >> >> > > > > > > > >> >> >> >> >[mailto:pmyers at redhat.com]
> >> >> >> >> > > > > > > > >> >> >> >> >Sent: Wednesday, February 08, 2012
> >> >> >> >> > > > > > > > >> >> >> >> >2:54 PM
> >> >> >> >> > > > > > > > >> >> >> >> >To: Mike Burns
> >> >> >> >> > > > > > > > >> >> >> >> >Cc: Li, David; users at ovirt.org
> >> >> >> >> > > > > > > > >> >> >> >> >Subject: Re: [Users] Pxeboot
> >> >> >> >> > > > > > > > >> >> >> >> >
> >> >> >> >> > > > > > > > >> >> >> >> >On 02/08/2012 05:03 PM, Mike Burns
> >wrote:
> >> >> >> >> > > > > > > > >> >> >> >> >> On Wed, 2012-02-08 at 13:46
> >> >> >> >> > > > > > > > >> >> >> >> >> -0800, Li, David
> >> >> >> >wrote:
> >> >> >> >> > > > > > > > >> >> >> >> >>> Mike,
> >> >> >> >> > > > > > > > >> >> >> >> >>>
> >> >> >> >> > > > > > > > >> >> >> >> >>> If I understand this correctly,
> >> >> >> >> > > > > > > > >> >> >> >> >>> today I should be able to
> >> >> >> >> > > > > > > > >> >> >> >> >>> pxeboot and nfs mount the
> >> >> >> >root fs from a remote server.
> >> >> >> >> > > > > > > > >> >> >> >> >>> Apart from setting up the pxe
> >> >> >> >> > > > > > > > >> >> >> >> >>> stuff, I 'd have to populate
> >> >> >> >> > > > > > > > >> >> >> >> >>> the ovirt node root fs on the
> >> >> >> >> > > > > > > > >> >> >> >> >>> server
> >> >> >> >> > > > > > > > >> >> >> >> >>> - perhaps steal it from a disk install.
> >> >> >> >> > > > > > > > >> >> >> >> >>> In other words I am concerned
> >> >> >> >> > > > > > > > >> >> >> >> >>> about the point from which the
> >> >> >> >> > > > > > > > >> >> >> >> >>> kernel starts to execute /init
> >> >> >> >> > > > > > > > >> >> >> >> >>> script (in the initramfs) to
> >> >> >> >> > > > > > > > >> >> >> >> >>> the
> >> >> >> >point /init is able to mount the final root fs from a remote server.
> >> >> >> >> > > > > > > > >> >> >> >> >>
> >> >> >> >> > > > > > > > >> >> >> >> >> No, there is no way to set this
> >> >> >> >> > > > > > > > >> >> >> >> >> up currently in
> >> >> >> >ovirt-node.
> >> >> >> >> > > > > > > > >> >> >> >> >> You could install using a remote
> >> >> >> >> > > > > > > > >> >> >> >> >> iscsi lun if you have a hardware
> >> >> >> >> > > > > > > > >> >> >> >> >> iscsi HBA, but there isn't a way
> >> >> >> >> > > > > > > > >> >> >> >> >> to mount a remote nfs share as
> >> >> >> >> > > > > > > > >> >> >> >> >> the
> >> >> >> >> > > > > > > > >> >> >root fs.
> >> >> >> >> > > > > > > > >> >> >> >> >>
> >> >> >> >> > > > > > > > >> >> >> >> >> Supporting a remote NFS share as
> >> >> >> >> > > > > > > > >> >> >> >> >> the root fs isn't even something
> >> >> >> >> > > > > > > > >> >> >> >> >> that requested as an RFE at this
> >> >> >> >> > > > > > > > >> >> >> >> >> point or on the roadmap as far
> >> >> >> >> > > > > > > > >> >> >> >> >> as
> >> >> >> >I'm aware.
> >> >> >> >> > > > > > > > >> >> >> >> >>
> >> >> >> >> > > > > > > > >> >> >> >> >> It sounds like what you're
> >> >> >> >> > > > > > > > >> >> >> >> >> really looking for is a shared
> >> >> >> >> > > > > > > > >> >> >> >> >> root fs that multiple hosts could use.
> >> >> >> >> > > > > > > > >> >> >> >> >> This is something that we will
> >> >> >> >> > > > > > > > >> >> >> >> >> probably look into eventually,
> >> >> >> >> > > > > > > > >> >> >> >> >> but it's not on the immediate
> >> >> >> >> > > > > > > > >> >> >roadmap.
> >> >> >> >> > > > > > > > >> >> >> >> >
> >> >> >> >> > > > > > > > >> >> >> >> >Given that the rootfs of oVirt
> >> >> >> >> > > > > > > > >> >> >> >> >Node is fairly small and in a
> >> >> >> >> > > > > > > > >> >> >> >> >truly stateless environment would
> >> >> >> >> > > > > > > > >> >> >> >> >just run out of system RAM,
> >> >> >> >> > > > > > > > >> >> >> >> >there's no real reason to try to
> >> >> >> >> > > > > > > > >> >> >> >> >do a shared NFS based
> >> >> >> >> > > > > > > > >rootfs.
> >> >> >> >> > > > > > > > >> >> >> >> >It's an unnecessary complication I
> >> >> >> >> > > > > > > > >> >> >> >> >think, if the end goal is to move
> >> >> >> >> > > > > > > > >> >> >> >> >to truly
> >> >> >> >> > > > > > > > >> >> >> >stateless.
> >> >> >> >> > > > > > > > >> >> >> >> >
> >> >> >> >> > > > > > > > >> >> >> >> >For larger systems where the
> >> >> >> >> > > > > > > > >> >> >> >> >rootfs is on the order of GB's,
> >> >> >> >> > > > > > > > >> >> >> >> >shared root may make more
> >> >> >> >sense.
> >> >> >> >> > > > > > > > >> >> >> >>
> >> >> >> >____________________________________________
> >> >> >> >> > > > > > > > >> >> >> >> ___ Users mailing list
> >> >> >> >> > > > > > > > >> >> >> >> Users at ovirt.org
> >> >> >> >> > > > > > > > >> >> >> >> http://lists.ovirt.org/mailman/list
> >> >> >> >> > > > > > > > >> >> >> >> inf o/u ser s
> >> >> >> >> > > > > > > > >> >> >> >
> >> >> >> >> > > > > > > > >> >> >>
> >> >> >> >> > > > > > > > >> >> >
> >> >> >> >> > > > > > > > >> >>
> >> >> >> >> > > > > > > > >> >>
> >> >> >> >_______________________________________________
> >> >> >> >> > > > > > > > >> >> Users mailing list Users at ovirt.org
> >> >> >> >> > > > > > > > >> >> http://lists.ovirt.org/mailman/listinfo/user
> >> >> >> >> > > > > > > > >> >> s
> >> >> >> >> > > > > > > > >> >
> >> >> >> >> > > > > > > > >>
> >> >> >> >> > > > > > > > >>
> >> >> >> >_______________________________________________
> >> >> >> >> > > > > > > > >> Users mailing list Users at ovirt.org
> >> >> >> >> > > > > > > > >> http://lists.ovirt.org/mailman/listinfo/users
> >> >> >> >> > > > > > > > >
> >> >> >> >> > > > > > > >
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > >
> >> >> >> >> > > > > > >
> >> >_______________________________________________
> >> >> >> >> > > > > > > Users mailing list
> >> >> >> >> > > > > > > Users at ovirt.org
> >> >> >> >> > > > > > > http://lists.ovirt.org/mailman/listinfo/users
> >> >> >> >> > > > > >
> >> >> >> >> > > > > >
> >> >> >> >> > > > > >
> >> >_______________________________________________
> >> >> >> >> > > > > > Users mailing list
> >> >> >> >> > > > > > Users at ovirt.org
> >> >> >> >> > > > > > http://lists.ovirt.org/mailman/listinfo/users
> >> >> >> >> > > > >
> >> >> >> >> > > > >
> >> >> >> >> > > >
> >> >> >> >> > > >
> >> >> >> >> > >
> >> >> >> >> > >
> >> >> >> >> > > _______________________________________________
> >> >> >> >> > > Users mailing list
> >> >> >> >> > > Users at ovirt.org
> >> >> >> >> > > http://lists.ovirt.org/mailman/listinfo/users
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > _______________________________________________
> >> >> >> >> > Users mailing list
> >> >> >> >> > Users at ovirt.org
> >> >> >> >> > http://lists.ovirt.org/mailman/listinfo/users
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> _______________________________________________
> >> >> >> >> Users mailing list
> >> >> >> >> Users at ovirt.org
> >> >> >> >> http://lists.ovirt.org/mailman/listinfo/users
> >> >> >> >
> >> >> >>
> >> >> >> _______________________________________________
> >> >> >> Users mailing list
> >> >> >> Users at ovirt.org
> >> >> >> http://lists.ovirt.org/mailman/listinfo/users
> >> >> >
> >> >>
> >> >
> >>
> >> _______________________________________________
> >> Users mailing list
> >> Users at ovirt.org
> >> http://lists.ovirt.org/mailman/listinfo/users
> >
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
More information about the Users
mailing list