[Users] Host missing cpuFlags

[Itamar Heim]

On 05/04/2012 02:26 PM, Nicholas Kesick wrote:
>
>
>  > Date: Fri, 4 May 2012 08:14:14 +0300
>  > From: iheim at redhat.com
>  > To: cybertimber2000 at hotmail.com
>  > CC: users at ovirt.org
>  > Subject: Re: [Users] Host missing cpuFlags
>  >
>  > On 05/04/2012 06:49 AM, Nicholas Kesick wrote:
>  > > I managed to get a host successfully added into oVirt Manager (Fedora16
>  > > minimum install, then used the wiki RPM install method), but the last
>  > > event reports "Host <hostname> moved to Non-operational state as host
>  > > does not meet the cluster's minimum CPU level. Missing CPU features:
>  > > CpuFlags"
>  > >
>  > > Can anyone shine some light on the problem? The CPU does support
>  > > virtualization... and as far as I can tell from cat /proc/cpuinfo does
>  > > does have cpu flags.
>  > > flags : fpu vme de pse tsc msr *pae* mce cx8 apic sep mtrr pge mca cmov
>  > > pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm
>  > > constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl *vmx* est cid cx16
>  > > xtpr pdcm lahf_lm tpr_shadow
>  >
>  > what is the cpu level of the cluster?
>  > what cluster compatibility level?
>  > what does vdsClient -s 0 getVdsCaps shows for cpu flags?
> I didn't even know there was a setting for that until now. This probably
> explains it.
> CPU Level of cluster: Intel Conroe Family
> Cluster Compatibility Level: 3.0 (?)
> Output of vdsClient -S - getVdsCaps:
> vdsClient -s 0 getVdsCaps
> HBAInventory = {'iSCSI': [{'InitiatorName':
> 'iqn.1994-05.com.redhat:238a26703858'}], 'FC': []}
> ISCSIInitiatorName = iqn.1994-05.com.redhat:238a26703858
> bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': {},
> 'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr':
> '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves':
> []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '',
> 'addr': '', 'slaves': []}, 'bond2': {'hwaddr': '00:00:00:00:00:00',
> 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond3': {'hwaddr':
> '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}}
> clusterLevels = ['3.0']
> cpuCores = 2
> cpuFlags =
> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,pebs,bts,nopl,pni,dtes64,monitor,ds_cpl,vmx,est,cid,cx16,xtpr,pdcm,lahf_lm,tpr_shadow,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_Opteron_G1

either libvirt isn't reporting this, or there is a vdsm bug filtering it 
erroneously.
cc-ing vdsm-devel