[Users] ovirtmgmt not installed

Assaf Muller amuller at redhat.com
Wed Dec 4 03:09:18 EST 2013


I personally have a F19 host working against 3.3 engine. Could you detail what doesn't work, and possibly attach engine and VDSM logs when an operation fails?

Assaf Muller, Cloud Networking Engineer 
Red Hat 

----- Original Message -----
From: "Pascal Jakobi" <pjakobi at yahoo.fr>
To: users at ovirt.org
Sent: Wednesday, December 4, 2013 8:22:05 AM
Subject: Re: [Users] ovirtmgmt not installed

At the end, I could not make an F19 Fedora host work against a 3.3 engine. I suggest someone from the eng team has a look at it. some stuff just does not work there. 

Therefore, I downgraded the fedora host to F18. On the engine side, I got the following error message : 
Host lab2 is compatible with versions (3.0,3.1,3.2) and cannot join Cluster Default which is set to version 3.3. 
Don't know what is to be set.... 

Anyway, I created a 3.2 cluster and installed the host into it. Seems to work (the host is up). 

Thanks again for support. 


Pascal Jakobi 
116 rue de Stalingrad 
93100 Montreuil, France 
Tel : + 33 6 87 47 58 19 
@ : pjakobi at yahoo.fr 


Le Mardi 3 décembre 2013 14h04, Pascal Jakobi <pjakobi at yahoo.fr> a écrit : 
Will do within a couple of hours. 
Many, many thanks 
Pascal Jakobi 
116 rue de Stalingrad 
93100 Montreuil, France 
Tel : + 33 6 87 47 58 19 
@ : pjakobi at yahoo.fr 


Le Mardi 3 décembre 2013 13h43, Antoni Segura Puimedon <asegurap at redhat.com> a écrit : 
Hi Pacal, 

Would you mind joining #ovirt at irc.oftc.net and pinging apuimedo? 
I have some questions that could be faster solved online. 

Best, 

Antoni 

----- Original Message ----- 
> From: "Pascal Jakobi" < pjakobi at yahoo.fr > 
> To: "Pascal Jakobi" < pascal.jakobi at gmail.com >, "Moti Asayag" < masayag at redhat.com > 
> Cc: users at ovirt.org 
> Sent: Tuesday, December 3, 2013 1:11:36 PM 
> Subject: Re: [Users] ovirtmgmt not installed 
> 
> Still the same, even with networking working like a charm... 
> Any idea ? 
> 
> [ root at lab2 vdsm]# vdsClient -s 0 getVdsCaps 
> HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName': 
> 'iqn.1994-05.com.redhat:a0bc8a5f9a5d'}]} 
> ISCSIInitiatorName = 'iqn.1994-05.com.redhat:a0bc8a5f9a5d' 
> bondings = {'bond0': {'addr': '', 
> 'cfg': {}, 
> 'hwaddr': '96:9d:8f:27:e1:8f', 
> 'ipv6addrs': [], 
> 'mtu': '1500', 
> 'netmask': '', 
> 'slaves': []}} 
> bridges = {} 
> clusterLevels = ['3.0', '3.1', '3.2', '3.3'] 
> cpuCores = '4' 
> cpuFlags = 
> 'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270,model_SandyBridge' 
> cpuModel = 'Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz' 
> cpuSockets = '1' 
> cpuSpeed = '3708.000' 
> cpuThreads = '8' 
> emulatedMachines = ['pc', 
> 'q35', 
> 'isapc', 
> 'pc-0.10', 
> 'pc-0.11', 
> 'pc-0.12', 
> 'pc-0.13', 
> 'pc-0.14', 
> 'pc-0.15', 
> 'pc-1.0', 
> 'pc-1.1', 
> 'pc-1.2', 
> 'pc-1.3', 
> 'none'] 
> guestOverhead = '65' 
> hooks = {} 
> kvmEnabled = 'true' 
> lastClient = '192.168.1.41' 
> lastClientIface = 'em1' 
> management_ip = '0.0.0.0' 
> memSize = '16001' 
> netConfigDirty = 'True' 
> networks = {} 
> nics = {'em1': {'addr': '192.168.1.42', 
> 'cfg': {}, 
> 'hwaddr': '00:1a:6b:51:de:b4', 
> 'ipv6addrs': ['fe80::21a:6bff:fe51:deb4/64'], 
> 'mtu': '1500', 
> 'netmask': '255.255.255.0', 
> 'speed': 100}} 
> operatingSystem = {'name': 'Fedora', 'release': '4', 'version': '19'} 
> packages2 = {'kernel': {'buildtime': 1384978944.0, 
> 'release': '200.fc19.x86_64', 
> 'version': '3.11.9'}, 
> 'libvirt': {'buildtime': 1384730741, 
> 'release': '2.fc19', 
> 'version': '1.0.5.7'}, 
> 'mom': {'buildtime': 1375215820, 'release': '3.fc19', 'version': '0.3.2'}, 
> 'qemu-img': {'buildtime': 1383700301, 
> 'release': '13.fc19', 
> 'version': '1.4.2'}, 
> 'qemu-kvm': {'buildtime': 1383700301, 
> 'release': '13.fc19', 
> 'version': '1.4.2'}, 
> 'spice-server': {'buildtime': 1383130020, 
> 'release': '3.fc19', 
> 'version': '0.12.4'}, 
> 'vdsm': {'buildtime': 1384274283, 'release': '11.fc19', 'version': '4.13.0'}} 
> reservedMem = '321' 
> software_revision = '11' 
> software_version = '4.13' 
> supportedENGINEs = ['3.0', '3.1', '3.2', '3.3'] 
> supportedProtocols = ['2.2', '2.3'] 
> uuid = '0A583269-811F-E211-AA06-001A6B51DEB4' 
> version_name = 'Snow Man' 
> vlans = {} 
> vmTypes = ['kvm'] 
> [ root at lab2 vdsm]# 
> 
> 
> Pascal Jakobi 
> 116 rue de Stalingrad 
> 93100 Montreuil, France 
> Tel : + 33 6 87 47 58 19 
> @ : pjakobi at yahoo.fr 
> 
> 
> Le Lundi 2 décembre 2013 10h31, Pascal Jakobi < pascal.jakobi at gmail.com > a 
> écrit : 
> As a matter of fact, when I installed F19, it created an eno1 device, aliased 
> to em1. Don't know why, yet. 
> Even adding a "GATEWAY" clause in /etc/sysconfig/network does not seem to 
> change the problem.... 
> 
> Will check how to change the device name. 
> 
> 
> 2013/12/1 Moti Asayag < masayag at redhat.com > 
> 
> 
> Hi Pascal, 
> 
> ----- Original Message ----- 
> > From: "Pascal Jakobi" < pascal.jakobi at gmail.com > 
> > To: "Mike Kolesnik" < mkolesni at redhat.com > 
> > Cc: users at ovirt.org , masayag at redhat.com 
> > Sent: Sunday, December 1, 2013 10:58:40 AM 
> > Subject: Re: ovirtmgmt not installed 
> > 
> > Mike 
> > 
> > Here you go. However, please note that I must investigate the connection 
> > issue that Alon saw. will do it tomorrow. 
> > Many thanks to you folks. 
> > P 
> 
> According to the output of 'nics' element, the 'em1' device is missing his 
> default gateway entry under the 'cfg' element. 
> 
> One reason for that can be there is no 
> '/etc/sysconfig/network-scripts/ifcfg-em1' 
> file and vdsm fails to obtain the default gateway for it. 
> 
> Could you create this file by your own and retry installing the host ? 
> After creating the file (make sure it contains NM_CONTROLLED=no), restart the 
> network service 
> and run 'vdsClient -s 0 getVdsCaps' to make sure 'em1' output contains the 
> data its 'cfg' sub- 
> element. 
> 
> > 
> > [ root at lab2 ~]# vdsClient -s 0 getVdsCaps 
> > HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName': 
> > 'iqn.1994-05.com.redhat:eea1322229a8'}]} 
> > ISCSIInitiatorName = 'iqn.1994-05.com.redhat:eea1322229a8' 
> > bondings = {'bond0': {'addr': '', 
> > 'cfg': {}, 
> > 'hwaddr': 'fa:7e:79:56:5a:c2', 
> > 'ipv6addrs': [], 
> > 'mtu': '1500', 
> > 'netmask': '', 
> > 'slaves': []}} 
> > bridges = {} 
> > clusterLevels = ['3.0', '3.1', '3.2', '3.3'] 
> > cpuCores = '4' 
> > cpuFlags = 
> > 'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270,model_SandyBridge' 
> > cpuModel = 'Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz' 
> > cpuSockets = '1' 
> > cpuSpeed = '3744.000' 
> > cpuThreads = '8' 
> > emulatedMachines = ['pc', 
> > 'q35', 
> > 'isapc', 
> > 'pc-0.10', 
> > 'pc-0.11', 
> > 'pc-0.12', 
> > 'pc-0.13', 
> > 'pc-0.14', 
> > 'pc-0.15', 
> > 'pc-1.0', 
> > 'pc-1.1', 
> > 'pc-1.2', 
> > 'pc-1.3', 
> > 'none'] 
> > guestOverhead = '65' 
> > hooks = {} 
> > kvmEnabled = 'false' 
> > lastClient = '192.168.1.41' 
> > lastClientIface = 'em1' 
> > management_ip = '0.0.0.0' 
> > memSize = '16001' 
> > netConfigDirty = 'False' 
> > networks = {} 
> > nics = {'em1': {'addr': '192.168.1.42', 
> > 'cfg': {}, 
> > 'hwaddr': '00:1a:6b:51:de:b4', 
> > 'ipv6addrs': ['fe80::21a:6bff:fe51:deb4/64'], 
> > 'mtu': '1500', 
> > 'netmask': '255.255.255.0', 
> > 'speed': 100}} 
> > operatingSystem = {'name': 'Fedora', 'release': '2', 'version': '19'} 
> > packages2 = {'kernel': {'buildtime': 1384978944.0, 
> > 'release': '200.fc19.x86_64', 
> > 'version': '3.11.9'}, 
> > 'libvirt': {'buildtime': 1384730741, 
> > 'release': '2.fc19', 
> > 'version': '1.0.5.7'}, 
> > 'mom': {'buildtime': 1375215820, 'release': '3.fc19', 
> > 'version': '0.3.2'}, 
> > 'qemu-img': {'buildtime': 1383700301, 
> > 'release': '13.fc19', 
> > 'version': '1.4.2'}, 
> > 'qemu-kvm': {'buildtime': 1383700301, 
> > 'release': '13.fc19', 
> > 'version': '1.4.2'}, 
> > 'spice-server': {'buildtime': 1383130020, 
> > 'release': '3.fc19', 
> > 'version': '0.12.4'}, 
> > 'vdsm': {'buildtime': 1384274283, 'release': '11.fc19', 
> > 'version': '4.13.0'}} 
> > reservedMem = '321' 
> > software_revision = '11' 
> > software_version = '4.13' 
> > supportedENGINEs = ['3.0', '3.1', '3.2', '3.3'] 
> > supportedProtocols = ['2.2', '2.3'] 
> > uuid = '0A583269-811F-E211-AA06-001A6B51DEB4' 
> > version_name = 'Snow Man' 
> > vlans = {} 
> > vmTypes = ['kvm'] 
> > 
> > 
> > 
> > 2013/12/1 Mike Kolesnik < mkolesni at redhat.com > 
> > 
> > > ------------------------------ 
> > > 
> > > *Hi there * 
> > > 
> > > 
> > > Hi Pascal, 
> > > 
> > > 
> > > 
> > > 
> > > *I installed a console on F19, then a F19 host (time 11:09 today).* 
> > > 
> > > *Everything works fine, apart from the installation of the mgmt network 
> > > at 
> > > the end. * 
> > > *Can someone tell me what's going wrong ?* 
> > > 
> > > 
> > > Can you please send the output of vdsCaps from the host (vdsClient -s 0 
> > > getVdsCaps)? 
> > > 
> > > 
> > > *Thxs in advance* 
> > > 
> > > *Pascal* 
> > > 
> > > 
> > > 
> > 
> > 
> > -- 
> > *Pascal Jakobi* 
> > 116 rue de Stalingrad 
> > 93100 Montreuil, France 
> > 
> > * +33 6 87 47 58 19 * Pascal.Jakobi at gmail.com 
> > 
> 
> 
> 
> -- 
> Pascal Jakobi 
> 116 rue de Stalingrad 
> 93100 Montreuil, France 
> +33 6 87 47 58 19 
> Pascal.Jakobi at gmail.com 
> 
> _______________________________________________ 
> Users mailing list 
> Users at ovirt.org 
> http://lists.ovirt.org/mailman/listinfo/users 

> 
> 
> 
> _______________________________________________ 
> Users mailing list 
> Users at ovirt.org 
> http://lists.ovirt.org/mailman/listinfo/users 
> 





_______________________________________________
Users mailing list
Users at ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


More information about the Users mailing list