[Users] ovirtmgmt not installed
Moti Asayag
masayag at redhat.com
Thu Dec 5 06:45:06 EST 2013
----- Original Message -----
> From: "Pascal Jakobi" <pascal.jakobi at gmail.com>
> To: "Antoni Segura Puimedon" <asegurap at redhat.com>
> Cc: "Pascal Jakobi" <pjakobi at yahoo.fr>, users at ovirt.org
> Sent: Wednesday, December 4, 2013 10:37:22 PM
> Subject: Re: [Users] ovirtmgmt not installed
>
> I have done this and it solves the issue.
> However, the next issue I found was that the host was not able to join a 3.3
> cluster (i.e. the "default" cluster).
> At this point, I went back to F18.
>
Could you paste the output of the 'vdsClient -s localhost getVdsCaps' ?
It contains an element named 'clusterLevels' which specifies the compatibility
of the host (the installed vdsm) to the engine cluster.
>
> 2013/12/4 Antoni Segura Puimedon < asegurap at redhat.com >
>
>
>
>
>
> ----- Original Message -----
> > From: "Assaf Muller" < amuller at redhat.com >
> > To: "Pascal Jakobi" < pjakobi at yahoo.fr >
> > Cc: users at ovirt.org
> > Sent: Wednesday, December 4, 2013 9:09:18 AM
> > Subject: Re: [Users] ovirtmgmt not installed
> >
> > I personally have a F19 host working against 3.3 engine. Could you detail
> > what doesn't work, and possibly attach engine and VDSM logs when an
> > operation fails?
>
> It seems to be an instance of
> https://bugzilla.redhat.com/show_bug.cgi?id=973179
> Anaconda created a wrongly named and wrongly configured ifcfg file.
> biosdevname said the device is em1 but the ifcfg file created by anaconda is
> ifcfg-eno1 (and the content refers to that name).
>
> The best way to solve this is to create an ifcfg file from scratch like the
> following:
>
> DEVICE=em1
> BOOTPROTO=dhcp
> ONBOOT=yes
> NM_CONTROLLED=no
> HWADDR=XX:XX:XX:XX:XX:XX # replace X with em1's HWADDR
>
> Then for extra safety, stop and mask Network Manager. And then deploy.
>
> >
> > Assaf Muller, Cloud Networking Engineer
> > Red Hat
> >
> > ----- Original Message -----
> > From: "Pascal Jakobi" < pjakobi at yahoo.fr >
> > To: users at ovirt.org
> > Sent: Wednesday, December 4, 2013 8:22:05 AM
> > Subject: Re: [Users] ovirtmgmt not installed
> >
> > At the end, I could not make an F19 Fedora host work against a 3.3 engine.
> > I
> > suggest someone from the eng team has a look at it. some stuff just does
> > not
> > work there.
> >
> > Therefore, I downgraded the fedora host to F18. On the engine side, I got
> > the
> > following error message :
> > Host lab2 is compatible with versions (3.0,3.1,3.2) and cannot join Cluster
> > Default which is set to version 3.3.
> > Don't know what is to be set....
> >
> > Anyway, I created a 3.2 cluster and installed the host into it. Seems to
> > work
> > (the host is up).
> >
> > Thanks again for support.
> >
> >
> > Pascal Jakobi
> > 116 rue de Stalingrad
> > 93100 Montreuil, France
> > Tel : + 33 6 87 47 58 19
> > @ : pjakobi at yahoo.fr
> >
> >
> > Le Mardi 3 décembre 2013 14h04, Pascal Jakobi < pjakobi at yahoo.fr > a écrit
> > :
> > Will do within a couple of hours.
> > Many, many thanks
> > Pascal Jakobi
> > 116 rue de Stalingrad
> > 93100 Montreuil, France
> > Tel : + 33 6 87 47 58 19
> > @ : pjakobi at yahoo.fr
> >
> >
> > Le Mardi 3 décembre 2013 13h43, Antoni Segura Puimedon <
> > asegurap at redhat.com >
> > a écrit :
> > Hi Pacal,
> >
> > Would you mind joining #ovirt at irc.oftc.net and pinging apuimedo?
> > I have some questions that could be faster solved online.
> >
> > Best,
> >
> > Antoni
> >
> > ----- Original Message -----
> > > From: "Pascal Jakobi" < pjakobi at yahoo.fr >
> > > To: "Pascal Jakobi" < pascal.jakobi at gmail.com >, "Moti Asayag" <
> > > masayag at redhat.com >
> > > Cc: users at ovirt.org
> > > Sent: Tuesday, December 3, 2013 1:11:36 PM
> > > Subject: Re: [Users] ovirtmgmt not installed
> > >
> > > Still the same, even with networking working like a charm...
> > > Any idea ?
> > >
> > > [ root at lab2 vdsm]# vdsClient -s 0 getVdsCaps
> > > HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName':
> > > 'iqn.1994-05.com.redhat:a0bc8a5f9a5d'}]}
> > > ISCSIInitiatorName = 'iqn.1994-05.com.redhat:a0bc8a5f9a5d'
> > > bondings = {'bond0': {'addr': '',
> > > 'cfg': {},
> > > 'hwaddr': '96:9d:8f:27:e1:8f',
> > > 'ipv6addrs': [],
> > > 'mtu': '1500',
> > > 'netmask': '',
> > > 'slaves': []}}
> > > bridges = {}
> > > clusterLevels = ['3.0', '3.1', '3.2', '3.3']
> > > cpuCores = '4'
> > > cpuFlags =
> > > 'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270,model_SandyBridge'
> > > cpuModel = 'Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz'
> > > cpuSockets = '1'
> > > cpuSpeed = '3708.000'
> > > cpuThreads = '8'
> > > emulatedMachines = ['pc',
> > > 'q35',
> > > 'isapc',
> > > 'pc-0.10',
> > > 'pc-0.11',
> > > 'pc-0.12',
> > > 'pc-0.13',
> > > 'pc-0.14',
> > > 'pc-0.15',
> > > 'pc-1.0',
> > > 'pc-1.1',
> > > 'pc-1.2',
> > > 'pc-1.3',
> > > 'none']
> > > guestOverhead = '65'
> > > hooks = {}
> > > kvmEnabled = 'true'
> > > lastClient = '192.168.1.41'
> > > lastClientIface = 'em1'
> > > management_ip = '0.0.0.0'
> > > memSize = '16001'
> > > netConfigDirty = 'True'
> > > networks = {}
> > > nics = {'em1': {'addr': '192.168.1.42',
> > > 'cfg': {},
> > > 'hwaddr': '00:1a:6b:51:de:b4',
> > > 'ipv6addrs': ['fe80::21a:6bff:fe51:deb4/64'],
> > > 'mtu': '1500',
> > > 'netmask': '255.255.255.0',
> > > 'speed': 100}}
> > > operatingSystem = {'name': 'Fedora', 'release': '4', 'version': '19'}
> > > packages2 = {'kernel': {'buildtime': 1384978944.0,
> > > 'release': '200.fc19.x86_64',
> > > 'version': '3.11.9'},
> > > 'libvirt': {'buildtime': 1384730741,
> > > 'release': '2.fc19',
> > > 'version': '1.0.5.7'},
> > > 'mom': {'buildtime': 1375215820, 'release': '3.fc19', 'version':
> > > '0.3.2'},
> > > 'qemu-img': {'buildtime': 1383700301,
> > > 'release': '13.fc19',
> > > 'version': '1.4.2'},
> > > 'qemu-kvm': {'buildtime': 1383700301,
> > > 'release': '13.fc19',
> > > 'version': '1.4.2'},
> > > 'spice-server': {'buildtime': 1383130020,
> > > 'release': '3.fc19',
> > > 'version': '0.12.4'},
> > > 'vdsm': {'buildtime': 1384274283, 'release': '11.fc19', 'version':
> > > '4.13.0'}}
> > > reservedMem = '321'
> > > software_revision = '11'
> > > software_version = '4.13'
> > > supportedENGINEs = ['3.0', '3.1', '3.2', '3.3']
> > > supportedProtocols = ['2.2', '2.3']
> > > uuid = '0A583269-811F-E211-AA06-001A6B51DEB4'
> > > version_name = 'Snow Man'
> > > vlans = {}
> > > vmTypes = ['kvm']
> > > [ root at lab2 vdsm]#
> > >
> > >
> > > Pascal Jakobi
> > > 116 rue de Stalingrad
> > > 93100 Montreuil, France
> > > Tel : + 33 6 87 47 58 19
> > > @ : pjakobi at yahoo.fr
> > >
> > >
> > > Le Lundi 2 décembre 2013 10h31, Pascal Jakobi < pascal.jakobi at gmail.com >
> > > a
> > > écrit :
> > > As a matter of fact, when I installed F19, it created an eno1 device,
> > > aliased
> > > to em1. Don't know why, yet.
> > > Even adding a "GATEWAY" clause in /etc/sysconfig/network does not seem to
> > > change the problem....
> > >
> > > Will check how to change the device name.
> > >
> > >
> > > 2013/12/1 Moti Asayag < masayag at redhat.com >
> > >
> > >
> > > Hi Pascal,
> > >
> > > ----- Original Message -----
> > > > From: "Pascal Jakobi" < pascal.jakobi at gmail.com >
> > > > To: "Mike Kolesnik" < mkolesni at redhat.com >
> > > > Cc: users at ovirt.org , masayag at redhat.com
> > > > Sent: Sunday, December 1, 2013 10:58:40 AM
> > > > Subject: Re: ovirtmgmt not installed
> > > >
> > > > Mike
> > > >
> > > > Here you go. However, please note that I must investigate the
> > > > connection
> > > > issue that Alon saw. will do it tomorrow.
> > > > Many thanks to you folks.
> > > > P
> > >
> > > According to the output of 'nics' element, the 'em1' device is missing
> > > his
> > > default gateway entry under the 'cfg' element.
> > >
> > > One reason for that can be there is no
> > > '/etc/sysconfig/network-scripts/ifcfg-em1'
> > > file and vdsm fails to obtain the default gateway for it.
> > >
> > > Could you create this file by your own and retry installing the host ?
> > > After creating the file (make sure it contains NM_CONTROLLED=no), restart
> > > the
> > > network service
> > > and run 'vdsClient -s 0 getVdsCaps' to make sure 'em1' output contains
> > > the
> > > data its 'cfg' sub-
> > > element.
> > >
> > > >
> > > > [ root at lab2 ~]# vdsClient -s 0 getVdsCaps
> > > > HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName':
> > > > 'iqn.1994-05.com.redhat:eea1322229a8'}]}
> > > > ISCSIInitiatorName = 'iqn.1994-05.com.redhat:eea1322229a8'
> > > > bondings = {'bond0': {'addr': '',
> > > > 'cfg': {},
> > > > 'hwaddr': 'fa:7e:79:56:5a:c2',
> > > > 'ipv6addrs': [],
> > > > 'mtu': '1500',
> > > > 'netmask': '',
> > > > 'slaves': []}}
> > > > bridges = {}
> > > > clusterLevels = ['3.0', '3.1', '3.2', '3.3']
> > > > cpuCores = '4'
> > > > cpuFlags =
> > > > 'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270,model_SandyBridge'
> > > > cpuModel = 'Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz'
> > > > cpuSockets = '1'
> > > > cpuSpeed = '3744.000'
> > > > cpuThreads = '8'
> > > > emulatedMachines = ['pc',
> > > > 'q35',
> > > > 'isapc',
> > > > 'pc-0.10',
> > > > 'pc-0.11',
> > > > 'pc-0.12',
> > > > 'pc-0.13',
> > > > 'pc-0.14',
> > > > 'pc-0.15',
> > > > 'pc-1.0',
> > > > 'pc-1.1',
> > > > 'pc-1.2',
> > > > 'pc-1.3',
> > > > 'none']
> > > > guestOverhead = '65'
> > > > hooks = {}
> > > > kvmEnabled = 'false'
> > > > lastClient = '192.168.1.41'
> > > > lastClientIface = 'em1'
> > > > management_ip = '0.0.0.0'
> > > > memSize = '16001'
> > > > netConfigDirty = 'False'
> > > > networks = {}
> > > > nics = {'em1': {'addr': '192.168.1.42',
> > > > 'cfg': {},
> > > > 'hwaddr': '00:1a:6b:51:de:b4',
> > > > 'ipv6addrs': ['fe80::21a:6bff:fe51:deb4/64'],
> > > > 'mtu': '1500',
> > > > 'netmask': '255.255.255.0',
> > > > 'speed': 100}}
> > > > operatingSystem = {'name': 'Fedora', 'release': '2', 'version': '19'}
> > > > packages2 = {'kernel': {'buildtime': 1384978944.0,
> > > > 'release': '200.fc19.x86_64',
> > > > 'version': '3.11.9'},
> > > > 'libvirt': {'buildtime': 1384730741,
> > > > 'release': '2.fc19',
> > > > 'version': '1.0.5.7'},
> > > > 'mom': {'buildtime': 1375215820, 'release': '3.fc19',
> > > > 'version': '0.3.2'},
> > > > 'qemu-img': {'buildtime': 1383700301,
> > > > 'release': '13.fc19',
> > > > 'version': '1.4.2'},
> > > > 'qemu-kvm': {'buildtime': 1383700301,
> > > > 'release': '13.fc19',
> > > > 'version': '1.4.2'},
> > > > 'spice-server': {'buildtime': 1383130020,
> > > > 'release': '3.fc19',
> > > > 'version': '0.12.4'},
> > > > 'vdsm': {'buildtime': 1384274283, 'release': '11.fc19',
> > > > 'version': '4.13.0'}}
> > > > reservedMem = '321'
> > > > software_revision = '11'
> > > > software_version = '4.13'
> > > > supportedENGINEs = ['3.0', '3.1', '3.2', '3.3']
> > > > supportedProtocols = ['2.2', '2.3']
> > > > uuid = '0A583269-811F-E211-AA06-001A6B51DEB4'
> > > > version_name = 'Snow Man'
> > > > vlans = {}
> > > > vmTypes = ['kvm']
> > > >
> > > >
> > > >
> > > > 2013/12/1 Mike Kolesnik < mkolesni at redhat.com >
> > > >
> > > > > ------------------------------
> > > > >
> > > > > *Hi there *
> > > > >
> > > > >
> > > > > Hi Pascal,
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > *I installed a console on F19, then a F19 host (time 11:09 today).*
> > > > >
> > > > > *Everything works fine, apart from the installation of the mgmt
> > > > > network
> > > > > at
> > > > > the end. *
> > > > > *Can someone tell me what's going wrong ?*
> > > > >
> > > > >
> > > > > Can you please send the output of vdsCaps from the host (vdsClient -s
> > > > > 0
> > > > > getVdsCaps)?
> > > > >
> > > > >
> > > > > *Thxs in advance*
> > > > >
> > > > > *Pascal*
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > > *Pascal Jakobi*
> > > > 116 rue de Stalingrad
> > > > 93100 Montreuil, France
> > > >
> > > > * +33 6 87 47 58 19 * Pascal.Jakobi at gmail.com
> > > >
> > >
> > >
> > >
> > > --
> > > Pascal Jakobi
> > > 116 rue de Stalingrad
> > > 93100 Montreuil, France
> > > +33 6 87 47 58 19
> > > Pascal.Jakobi at gmail.com
> > >
> > > _______________________________________________
> > > Users mailing list
> > > Users at ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> >
> > >
> > >
> > >
> > > _______________________________________________
> > > Users mailing list
> > > Users at ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> >
> >
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> --
> Pascal Jakobi
> 116 rue de Stalingrad
> 93100 Montreuil, France
> +33 6 87 47 58 19
> Pascal.Jakobi at gmail.com
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
More information about the Users
mailing list