[Users] ovirt Connection Storage error
xianghuadu
xianghuadu at gmail.com
Wed Feb 27 03:30:09 EST 2013
hi liron aravot
Thank you for your help
[root at kvm1 libvirt]# cat libvirtd.conf
# Master libvirt daemon configuration file
#
# For further information consult http://libvirt.org/format.html
#
# NOTE: the tests/daemon-conf regression test script requires
# that each "PARAMETER = VALUE" line in this file have the parameter
# name just after a leading "#".
#################################################################
#
# Network connectivity controls
#
# Flag listening for secure TLS connections on the public TCP/IP port.
# NB, must pass the --listen flag to the libvirtd process for this to
# have any effect.
#
# It is necessary to setup a CA and issue server certificates before
# using this capability.
#
# This is enabled by default, uncomment this to disable it
#listen_tls = 0
# Listen for unencrypted TCP connections on the public TCP/IP port.
# NB, must pass the --listen flag to the libvirtd process for this to
# have any effect.
#
# Using the TCP socket requires SASL authentication by default. Only
# SASL mechanisms which support data encryption are allowed. This is
# DIGEST_MD5 and GSSAPI (Kerberos5)
#
# This is disabled by default, uncomment this to enable it.
#listen_tcp = 1
# Override the port for accepting secure TLS connections
# This can be a port number, or service name
#
#tls_port = "16514"
# Override the port for accepting insecure TCP connections
# This can be a port number, or service name
#
#tcp_port = "16509"
# Override the default configuration which binds to all network
# interfaces. This can be a numeric IPv4/6 address, or hostname
#
#listen_addr = "192.168.0.1"
# Flag toggling mDNS advertizement of the libvirt service.
#
# Alternatively can disable for all services on a host by
# stopping the Avahi daemon
#
# This is enabled by default, uncomment this to disable it
#mdns_adv = 0
# Override the default mDNS advertizement name. This must be
# unique on the immediate broadcast network.
#
# The default is "Virtualization Host HOSTNAME", where HOSTNAME
# is subsituted for the short hostname of the machine (without domain)
#
#mdns_name = "Virtualization Host Joe Demo"
#################################################################
#
# UNIX socket access controls
#
# Set the UNIX domain socket group ownership. This can be used to
# allow a 'trusted' set of users access to management capabilities
# without becoming root.
#
# This is restricted to 'root' by default.
#unix_sock_group = "libvirt"
# Set the UNIX socket permissions for the R/O socket. This is used
# for monitoring VM status only
#
# Default allows any user. If setting group ownership may want to
# restrict this to:
#unix_sock_ro_perms = "0777"
# Set the UNIX socket permissions for the R/W socket. This is used
# for full management of VMs
#
# Default allows only root. If PolicyKit is enabled on the socket,
# the default will change to allow everyone (eg, 0777)
#
# If not using PolicyKit and setting group ownership for access
# control then you may want to relax this to:
#unix_sock_rw_perms = "0770"
# Set the name of the directory in which sockets will be found/created.
#unix_sock_dir = "/var/run/libvirt"
#################################################################
#
# Authentication.
#
# - none: do not perform auth checks. If you can connect to the
# socket you are allowed. This is suitable if there are
# restrictions on connecting to the socket (eg, UNIX
# socket permissions), or if there is a lower layer in
# the network providing auth (eg, TLS/x509 certificates)
#
# - sasl: use SASL infrastructure. The actual auth scheme is then
# controlled from /etc/sasl2/libvirt.conf. For the TCP
# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
# For non-TCP or TLS sockets, any scheme is allowed.
#
# - polkit: use PolicyKit to authenticate. This is only suitable
# for use on the UNIX sockets. The default policy will
# require a user to supply their own password to gain
# full read/write access (aka sudo like), while anyone
# is allowed read/only access.
#
# Set an authentication scheme for UNIX read-only sockets
# By default socket permissions allow anyone to connect
#
# To restrict monitoring of domains you may wish to enable
# an authentication mechanism here
#auth_unix_ro = "none"
# Set an authentication scheme for UNIX read-write sockets
# By default socket permissions only allow root. If PolicyKit
# support was compiled into libvirt, the default will be to
# use 'polkit' auth.
#
# If the unix_sock_rw_perms are changed you may wish to enable
# an authentication mechanism here
#auth_unix_rw = "none"
# Change the authentication scheme for TCP sockets.
#
# If you don't enable SASL, then all TCP traffic is cleartext.
# Don't do this outside of a dev/test scenario. For real world
# use, always enable SASL and use the GSSAPI or DIGEST-MD5
# mechanism in /etc/sasl2/libvirt.conf
#auth_tcp = "sasl"
# Change the authentication scheme for TLS sockets.
#
# TLS sockets already have encryption provided by the TLS
# layer, and limited authentication is done by certificates
#
# It is possible to make use of any SASL authentication
# mechanism as well, by using 'sasl' for this option
#auth_tls = "none"
#################################################################
#
# TLS x509 certificate configuration
#
# Override the default server key file path
#
#key_file = "/etc/pki/libvirt/private/serverkey.pem"
# Override the default server certificate file path
#
#cert_file = "/etc/pki/libvirt/servercert.pem"
# Override the default CA certificate path
#
#ca_file = "/etc/pki/CA/cacert.pem"
# Specify a certificate revocation list.
#
# Defaults to not using a CRL, uncomment to enable it
#crl_file = "/etc/pki/CA/crl.pem"
#################################################################
#
# Authorization controls
#
# Flag to disable verification of our own server certificates
#
# When libvirtd starts it performs some sanity checks against
# its own certificates.
#
# Default is to always run sanity checks. Uncommenting this
# will disable sanity checks which is not a good idea
#tls_no_sanity_certificate = 1
# Flag to disable verification of client certificates
#
# Client certificate verification is the primary authentication mechanism.
# Any client which does not present a certificate signed by the CA
# will be rejected.
#
# Default is to always verify. Uncommenting this will disable
# verification - make sure an IP whitelist is set
#tls_no_verify_certificate = 1
# A whitelist of allowed x509 Distinguished Names
# This list may contain wildcards such as
#
# "C=GB,ST=London,L=London,O=Red Hat,CN=*"
#
# See the POSIX fnmatch function for the format of the wildcards.
#
# NB If this is an empty list, no client can connect, so comment out
# entirely rather than using empty list to disable these checks
#
# By default, no DN's are checked
#tls_allowed_dn_list = ["DN1", "DN2"]
# A whitelist of allowed SASL usernames. The format for usernames
# depends on the SASL authentication mechanism. Kerberos usernames
# look like username at REALM
#
# This list may contain wildcards such as
#
# "*@EXAMPLE.COM"
#
# See the POSIX fnmatch function for the format of the wildcards.
#
# NB If this is an empty list, no client can connect, so comment out
# entirely rather than using empty list to disable these checks
#
# By default, no Username's are checked
#sasl_allowed_username_list = ["joe at EXAMPLE.COM", "fred at EXAMPLE.COM" ]
#################################################################
#
# Processing controls
#
# The maximum number of concurrent client connections to allow
# over all sockets combined.
#max_clients = 20
# The minimum limit sets the number of workers to start up
# initially. If the number of active clients exceeds this,
# then more threads are spawned, upto max_workers limit.
# Typically you'd want max_workers to equal maximum number
# of clients allowed
#min_workers = 5
#max_workers = 20
# The number of priority workers. If all workers from above
# pool will stuck, some calls marked as high priority
# (notably domainDestroy) can be executed in this pool.
#prio_workers = 5
# Total global limit on concurrent RPC calls. Should be
# at least as large as max_workers. Beyond this, RPC requests
# will be read into memory and queued. This directly impact
# memory usage, currently each request requires 256 KB of
# memory. So by default upto 5 MB of memory is used
#
# XXX this isn't actually enforced yet, only the per-client
# limit is used so far
#max_requests = 20
# Limit on concurrent requests from a single client
# connection. To avoid one client monopolizing the server
# this should be a small fraction of the global max_requests
# and max_workers parameter
#max_client_requests = 5
#################################################################
#
# Logging controls
#
# Logging level: 4 errors, 3 warnings, 2 information, 1 debug
# basically 1 will log everything possible
#log_level = 3
# Logging filters:
# A filter allows to select a different logging level for a given category
# of logs
# The format for a filter is:
# x:name
# where name is a match string e.g. remote or qemu
# the x prefix is the minimal level where matching messages should be logged
# 1: DEBUG
# 2: INFO
# 3: WARNING
# 4: ERROR
#
# Multiple filter can be defined in a single @filters, they just need to be
# separated by spaces.
#
# e.g:
# log_filters="3:remote 4:event"
# to only get warning or errors from the remote layer and only errors from
# the event layer.
# Logging outputs:
# An output is one of the places to save logging information
# The format for an output can be:
# x:stderr
# output goes to stderr
# x:syslog:name
# use syslog for the output and use the given name as the ident
# x:file:file_path
# output to a file, with the given filepath
# In all case the x prefix is the minimal level, acting as a filter
# 1: DEBUG
# 2: INFO
# 3: WARNING
# 4: ERROR
#
# Multiple output can be defined, they just need to be separated by spaces.
# e.g.:
# log_outputs="3:syslog:libvirtd"
# to log all warnings and errors to syslog under the libvirtd ident
# Log debug buffer size: default 64
# The daemon keeps an internal debug log buffer which will be dumped in case
# of crash or upon receiving a SIGUSR2 signal. This setting allows to override
# the default buffer size in kilobytes.
# If value is 0 or less the debug log buffer is deactivated
#log_buffer_size = 64
##################################################################
#
# Auditing
#
# This setting allows usage of the auditing subsystem to be altered:
#
# audit_level == 0 -> disable all auditing
# audit_level == 1 -> enable auditing, only if enabled on host (default)
# audit_level == 2 -> enable auditing, and exit if disabled on host
#
#audit_level = 2
#
# If set to 1, then audit messages will also be sent
# via libvirt logging infrastructure. Defaults to 0
#
#audit_logging = 1
###################################################################
# UUID of the host:
# Provide the UUID of the host here in case the command
# 'dmidecode -s system-uuid' does not provide a valid uuid. In case
# 'dmidecode' does not provide a valid UUID and none is provided here, a
# temporary UUID will be generated.
# Keep the format of the example UUID below. UUID must not have all digits
# be the same.
# NB This default all-zeros UUID will not work. Replace
# it with the output of the 'uuidgen' command and then
# uncomment this entry
#host_uuid = "00000000-0000-0000-0000-000000000000"
###################################################################
# Keepalive protocol:
# This allows libvirtd to detect broken client connections or even
# dead client. A keepalive message is sent to a client after
# keepalive_interval seconds of inactivity to check if the client is
# still responding; keepalive_count is a maximum number of keepalive
# messages that are allowed to be sent to the client without getting
# any response before the connection is considered broken. In other
# words, the connection is automatically closed approximately after
# keepalive_interval * (keepalive_count + 1) seconds since the last
# message received from the client. If keepalive_interval is set to
# -1, libvirtd will never send keepalive requests; however clients
# can still send them and the deamon will send responses. When
# keepalive_count is set to 0, connections will be automatically
# closed after keepalive_interval seconds of inactivity without
# sending any keepalive messages. Disabled by default.
#
#keepalive_interval = 5
#keepalive_count = 5
#
# If set to 1, libvirtd will refuse to talk to clients that do not
# support keepalive protocol. Defaults to 0.
#
#keepalive_required = 1
## beginning of configuration section by vdsm-4.9.6
listen_addr="0.0.0.0"
unix_sock_group="kvm"
unix_sock_rw_perms="0770"
auth_unix_rw="sasl"
save_image_format="lzop"
log_outputs="1:file:/var/log/libvirtd.log"
log_filters="1:libvirt 3:event 3:json 1:util 1:qemu"
ca_file="/etc/pki/vdsm/certs/cacert.pem"
cert_file="/etc/pki/vdsm/certs/vdsmcert.pem"
key_file="/etc/pki/vdsm/keys/vdsmkey.pem"
## end of configuration section by vdsm-4.9.6
[root at kvm1 libvirt]# tail /var/log/libvirt/libvirtd.log -n 20
2013-02-26 06:33:27.063+0000: 2128: error : remoteDispatchAuthPolkit:2559 : Policy kit denied action org.libvirt.unix.manage from pid 4031, uid 36: exit status 2
2013-02-26 06:33:27.063+0000: 2128: error : remoteDispatchAuthPolkit:2588 : authentication failed: Authorization requires authentication but no agent is available.
2013-02-26 06:33:27.098+0000: 2119: error : virNetSocketReadWire:999 : End of file while reading data: Input/output error
2013-02-26 06:33:27.333+0000: 2120: error : remoteDispatchAuthPolkit:2559 : Policy kit denied action org.libvirt.unix.manage from pid 4041, uid 36: exit status 2
2013-02-26 06:33:27.333+0000: 2120: error : remoteDispatchAuthPolkit:2588 : authentication failed: Authorization requires authentication but no agent is available.
2013-02-26 06:33:27.368+0000: 2119: error : virNetSocketReadWire:999 : End of file while reading data: Input/output error
2013-02-26 06:33:27.603+0000: 2122: error : remoteDispatchAuthPolkit:2559 : Policy kit denied action org.libvirt.unix.manage from pid 4051, uid 36: exit status 2
2013-02-26 06:33:27.603+0000: 2122: error : remoteDispatchAuthPolkit:2588 : authentication failed: Authorization requires authentication but no agent is available.
2013-02-26 06:33:27.636+0000: 2119: error : virNetSocketReadWire:999 : End of file while reading data: Input/output error
2013-02-26 06:33:27.871+0000: 2124: error : remoteDispatchAuthPolkit:2559 : Policy kit denied action org.libvirt.unix.manage from pid 4061, uid 36: exit status 2
2013-02-26 06:33:27.872+0000: 2124: error : remoteDispatchAuthPolkit:2588 : authentication failed: Authorization requires authentication but no agent is available.
2013-02-26 06:33:27.904+0000: 2119: error : virNetSocketReadWire:999 : End of file while reading data: Input/output error
2013-02-26 06:33:28.142+0000: 2126: error : remoteDispatchAuthPolkit:2559 : Policy kit denied action org.libvirt.unix.manage from pid 4071, uid 36: exit status 2
2013-02-26 06:33:28.142+0000: 2126: error : remoteDispatchAuthPolkit:2588 : authentication failed: Authorization requires authentication but no agent is available.
2013-02-26 06:33:28.176+0000: 2119: error : virNetSocketReadWire:999 : End of file while reading data: Input/output error
xianghuadu
From: Liron Aravot
Date: 2013-02-27 16:01
To: xianghuadu
CC: users
Subject: Re: [Users] ovirt Connection Storage error
Hi, looking in the vdsm logs i see
libvirtError: authentication failed: Authorization requires authentication but no agent is available.
can you please attach your libvirt configuration file and the libvirt log perhaps?
----- Original Message -----
> From: "xianghuadu" <xianghuadu at gmail.com>
> To: "Liron Aravot" <laravot at redhat.com>
> Cc: "users" <users at ovirt.org>
> Sent: Tuesday, February 26, 2013 10:21:57 AM
> Subject: Re: Re: [Users] ovirt Connection Storage error
>
>
> hi liron aravot
> attached is full vdsm log
> thx
>
>
> xianghuadu
>
>
>
> From: Liron Aravot
> Date: 2013-02-26 15:50
> To: xianghuadu
> CC: users
> Subject: Re: [Users] ovirt Connection Storage error
>
> Hi,
> can you please attach the full vdsm log?
>
> ----- Original Message -----
> > From: "xianghuadu" <xianghuadu at gmail.com>
> > To: "users" <users at ovirt.org>
> > Sent: Tuesday, February 26, 2013 9:27:05 AM
> > Subject: [Users] ovirt Connection Storage error
> >
> >
> >
> > Hi all
> > Add iscsi storage, Error while executing action New SAN storage
> > Domain: Unexpected exception.
> > engine log
> >
> >
> >
> > 2013-02-26 15:09:08,211 INFO
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > (ajp--127.0.0.1-8702-1) [4952790e] HostName = 225
> > 2013-02-26 15:09:08,212 ERROR
> > [org.ovirt.engine.core.vdsbroker.VDSCommandBase]
> > (ajp--127.0.0.1-8702-1) [4952790e] Command FormatStorageDomainVDS
> > execution failed. Exception: VDSErrorException:
> > VDSGenericException:
> > VDSErrorException: Failed to FormatStorageDomainVDS, error = Cannot
> > format attached storage domain:
> > ('378ef2e6-e12d-4eae-8c6c-9bc2b983d4ce',)
> > 2013-02-26 15:09:08,214 INFO
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.FormatStorageDomainVDSCommand]
> > (ajp--127.0.0.1-8702-1) [4952790e] FINISH,
> > FormatStorageDomainVDSCommand, log id: 1f498799
> > 2013-02-26 15:09:08,215 ERROR
> > [org.ovirt.engine.core.bll.storage.RemoveStorageDomainCommand]
> > (ajp--127.0.0.1-8702-1) [4952790e] Command
> > org.ovirt.engine.core.bll.storage.RemoveStorageDomainCommand throw
> > Vdc Bll exception. With error message VdcBLLException:
> > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
> > VDSGenericException: VDSErrorException: Failed to
> > FormatStorageDomainVDS, error = Cannot format attached storage
> > domain: ('378ef2e6-e12d-4eae-8c6c-9bc2b983d4ce',)
> > 2013-02-26 15:09:08,221 INFO
> > [org.ovirt.engine.core.bll.storage.RemoveStorageDomainCommand]
> > (ajp--127.0.0.1-8702-1) [4952790e] Lock freed to object EngineLock
> > [exclusiveLocks= key: 378ef2e6-e12d-4eae-8c6c-9bc2b983d4ce value:
> > STORAGE
> > , sharedLocks= ]
> > 2013-02-26 15:09:42,067 WARN
> > [org.ovirt.engine.core.bll.storage.UpdateStoragePoolCommand]
> > (ajp--127.0.0.1-8702-6) [a8c7727] CanDoAction of action
> > UpdateStoragePool failed.
> > Reasons:VAR__TYPE__STORAGE__POOL,ACTION_TYPE_FAILED_STORAGE_POOL_WITH_DEFAULT_VDS_GROUP_CANNOT_BE_LOCALFS,VAR__ACTION__UPDATE
> > 2013-02-26 15:09:59,224 INFO
> > [org.ovirt.engine.core.bll.storage.UpdateStoragePoolCommand]
> > (ajp--127.0.0.1-8702-3) [3d8faa5f] Running command:
> > UpdateStoragePoolCommand internal: false. Entities affected : ID:
> > da5870e0-7aae-11e2-9da5-00188be4de29 Type: StoragePool
> > 2013-02-26 15:10:00,000 INFO
> > [org.ovirt.engine.core.bll.AutoRecoveryManager]
> > (QuartzScheduler_Worker-80) Autorecovering hosts is disabled,
> > skipping
> > 2013-02-26 15:10:00,001 INFO
> > [org.ovirt.engine.core.bll.AutoRecoveryManager]
> > (QuartzScheduler_Worker-80) Autorecovering storage domains is
> > disabled, skipping
> > 2013-02-26 15:10:23,814 INFO
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.GetDeviceListVDSCommand]
> > (ajp--127.0.0.1-8702-2) START, GetDeviceListVDSCommand(HostName =
> > 225, HostId = 342b111a-7fdf-11e2-a963-00188be4de29,
> > storageType=ISCSI), log id: 484eccef
> > 2013-02-26 15:10:24,119 INFO
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.GetDeviceListVDSCommand]
> > (ajp--127.0.0.1-8702-2) FINISH, GetDeviceListVDSCommand, return:
> > [org.ovirt.engine.core.common.businessentities.LUNs at b420cc6], log
> > id: 484eccef
> > 2013-02-26 15:10:32,523 INFO
> > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
> > (ajp--127.0.0.1-8702-4) [66fa978c] Running command:
> > AddSANStorageDomainCommand internal: false. Entities affected : ID:
> > aaa00000-0000-0000-0000-123456789aaa Type: System
> > 2013-02-26 15:10:32,539 INFO
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand]
> > (ajp--127.0.0.1-8702-4) [66fa978c] START,
> > CreateVGVDSCommand(HostName = 225, HostId =
> > 342b111a-7fdf-11e2-a963-00188be4de29,
> > storageDomainId=c13260c4-d1aa-455c-9031-0711a7a4cc8d,
> > deviceList=[1494554000000000078797a00000000000000000000000000],
> > force=false), log id: 4f1651f1
> > 2013-02-26 15:10:32,578 ERROR
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > (ajp--127.0.0.1-8702-4) [66fa978c] Failed in CreateVGVDS method
> > 2013-02-26 15:10:32,579 ERROR
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > (ajp--127.0.0.1-8702-4) [66fa978c] Error code unexpected and error
> > message VDSGenericException: VDSErrorException: Failed to
> > CreateVGVDS, error = Unexpected exception
> > 2013-02-26 15:10:32,581 INFO
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > (ajp--127.0.0.1-8702-4) [66fa978c] Command
> > org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand return
> > value
> > Class Name:
> > org.ovirt.engine.core.vdsbroker.irsbroker.OneUuidReturnForXmlRpc
> > mUuid Null
> > mStatus Class Name:
> > org.ovirt.engine.core.vdsbroker.vdsbroker.StatusForXmlRpc
> > mCode 16
> > mMessage Unexpected exception
> >
> > 2013-02-26 15:10:32,585 INFO
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > (ajp--127.0.0.1-8702-4) [66fa978c] HostName = 225
> > 2013-02-26 15:10:32,586 ERROR
> > [org.ovirt.engine.core.vdsbroker.VDSCommandBase]
> > (ajp--127.0.0.1-8702-4) [66fa978c] Command CreateVGVDS execution
> > failed. Exception: VDSErrorException: VDSGenericException:
> > VDSErrorException: Failed to CreateVGVDS, error = Unexpected
> > exception
> > 2013-02-26 15:10:32,588 INFO
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand]
> > (ajp--127.0.0.1-8702-4) [66fa978c] FINISH, CreateVGVDSCommand, log
> > id: 4f1651f1
> > 2013-02-26 15:10:32,589 ERROR
> > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
> > (ajp--127.0.0.1-8702-4) [66fa978c] Command
> > org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand throw
> > Vdc Bll exception. With error message VdcBLLException:
> > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
> > VDSGenericException: VDSErrorException: Failed to CreateVGVDS,
> > error
> > = Unexpected exception
> > 2013-02-26 15:10:32,600 INFO
> > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
> > (ajp--127.0.0.1-8702-4) [66fa978c] Command
> > [id=62567c07-e736-4909-a501-ee8663d71eac]: Compensating
> > NEW_ENTITY_ID of
> > org.ovirt.engine.core.common.businessentities.storage_domain_dynamic;
> > snapshot: c13260c4-d1aa-455c-9031-0711a7a4cc8d.
> > 2013-02-26 15:10:32,607 INFO
> > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
> > (ajp--127.0.0.1-8702-4) [66fa978c] Command
> > [id=62567c07-e736-4909-a501-ee8663d71eac]: Compensating
> > NEW_ENTITY_ID of
> > org.ovirt.engine.core.common.businessentities.storage_domain_static;
> > snapshot: c13260c4-d1aa-455c-9031-0711a7a4cc8d.
> > 2013-02-26 15:10:32,617 ERROR
> > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
> > (ajp--127.0.0.1-8702-4) [66fa978c] Transaction rolled-back for
> > command:
> > org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand.
> > vdsm log
> >
> >
> >
> > Thread-1296::DEBUG::2013-02-26
> > 15:19:23,200::resourceManager::844::ResourceManager.Owner::(cancelAll)
> > Owner.cancelAll requests {}
> > Thread-1296::DEBUG::2013-02-26
> > 15:19:23,200::task::978::TaskManager.Task::(_decref)
> > Task=`d9716eca-da88-472d-8fdd-19b8be8a02ab`::ref 0 aborting False
> > Thread-1302::DEBUG::2013-02-26
> > 15:19:33,367::task::588::TaskManager.Task::(_updateState)
> > Task=`30352e65-67be-4cea-a094-9830c5bda21f`::moving from state init
> > -> state preparing
> > Thread-1302::INFO::2013-02-26
> > 15:19:33,367::logUtils::37::dispatcher::(wrapper) Run and protect:
> > repoStats(options=None)
> > Thread-1302::INFO::2013-02-26
> > 15:19:33,368::logUtils::39::dispatcher::(wrapper) Run and protect:
> > repoStats, Return response: {}
> > Thread-1302::DEBUG::2013-02-26
> > 15:19:33,368::task::1172::TaskManager.Task::(prepare)
> > Task=`30352e65-67be-4cea-a094-9830c5bda21f`::finished: {}
> > Thread-1302::DEBUG::2013-02-26
> > 15:19:33,368::task::588::TaskManager.Task::(_updateState)
> > Task=`30352e65-67be-4cea-a094-9830c5bda21f`::moving from state
> > preparing -> state finished
> > Thread-1302::DEBUG::2013-02-26
> > 15:19:33,368::resourceManager::809::ResourceManager.Owner::(releaseAll)
> > Owner.releaseAll requests {} resources {}
> > Thread-1302::DEBUG::2013-02-26
> > 15:19:33,368::resourceManager::844::ResourceManager.Owner::(cancelAll)
> > Owner.cancelAll requests {}
> > Thread-1302::DEBUG::2013-02-26
> > 15:19:33,368::task::978::TaskManager.Task::(_decref)
> > Task=`30352e65-67be-4cea-a094-9830c5bda21f`::ref 0 aborting False
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130227/14c70910/attachment-0001.html>
More information about the Users
mailing list