[Users] Choosing which network to run VM migration on ovirt 3.1

[Yuval M]

after a bit of playing with the system, I found a nice workaround:
I added a host route on each host:

# route add -host 10.100.101.101 gw 172.22.22.1
and on the other one:
# route add -host 10.100.101.100 gw 172.22.22.2

where 10.100.101/24 is the slow network and 172.22.22/24 is the fast
network.
migration now works through the fast link, with nothing changed in ovirt's
configuration.

Yuval

On Sun, Jan 6, 2013 at 11:49 PM, Dan Kenigsberg <danken at redhat.com> wrote:

> On Sun, Jan 06, 2013 at 10:08:48PM +0200, Yuval M wrote:
> > Hi,
> > I'm running the following setup:
> > 2 hosts,
> > each has 2 physical NICs,
> > the first NIC (which is bridged to ovirtmgmt) is a 100Mbps ethernet card
> > connected to a switch (and to the internet)
> > the 2nd NIC is a fast Infiniband card which is connected back-to-back to
> > the other host.
> >
> > both links are running fine, and I managed to have the 2nd host mount the
> > storage via the fast link.
> > The problem is that VM migration takes place over the slow link.
> >
> > How do I configure the cluster so that the migration uses the fast link?
> > I've already created a network using the web interface. the migration
> still
> > uses the slow link.
>
> Currently, oVirt always uses the ovirtmgmt network for migration data,
> even though libvirt already supports choosing a non-mananagement IP
> address for that. So I do not see how you could use the Infiniband card
> for migration without defining ovirtmgmt there, or with serious vdsm
> hacking.
>
> When I'm saying "serious", I mean something in the lines of
> (the untested!) http://gerrit.ovirt.org/10696 .
>
> To use this patch, you would first need to define a non-VM network over
> the Infiniband connection on both hosts, and provide them with IP
> address. Then, the name of this network should be passed as the value of
> a VM custom propery call 'mignet'.
>
> It would be great if you can try it out and debug it and/or comment on
> it.
>
> Dan
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130107/f63b66b7/attachment.html>