[Users] ovirt LACP/port aggregation fails to initialize on node boot

[Mike Kolesnik]

----- Original Message -----
> I'm experimenting with LACP/port aggregation on my public network
> interface in my oVirt test setup. My goal is to bind two 1G ports
> together.  Our network operations team configured two 1G switch ports
> appropriately, and I set up the bond between eth0 and eth1 on the node
> using the engine.  I can't configure the IP of the interface statically
> because then I don't get the option to set a gateway, which I need for
> our public network.  Using DHCP worked before enabling LACP (which
> acquires the gateway from the DHCP record).  After enabling LACP, when
> the node boots, it doesn't get an address. The node gets hostname
> "localhost".  I have to login to the admin, hit F2, "ifdown PublicNet"
> "ifup PublicNet", but then it works!  There's obviously some minor delay
> issue during node initialization, but there should be some way to tell
> it to wait a bit longer?

Hi Jason,

Can you please send a pastebin of 'vdsClient 0 getVdsCaps' (or 'vdsClient -s 0 getVdsCaps') on the host with the bond?

> 
> Jason.
> 
> --
> Jason Keltz
> Manager of Development
> Department of Electrical Engineering and Computer Science
> York University, Toronto, Canada
> Tel: 416-736-2100 x. 33570
> Fax: 416-736-5872
>