[ovirt-users] Re-add a node
Dafna Ron
dron at redhat.com
Fri Apr 11 07:16:51 EDT 2014
what is the error message you get when you try to put the host in
maintenance? are there any running vm's reported?
Try to press the "confirm host has been rebooted" button and than see if
you can put the host in maintenance.
If that fails, select the host, in the general tab you will get the
re-install link.
try to re-install, when install fails the host should change status to
failed installation.
On 04/11/2014 12:09 PM, James James wrote:
> No, I can't ....
>
>
> 2014-04-11 12:12 GMT+02:00 Dafna Ron <dron at redhat.com
> <mailto:dron at redhat.com>>:
>
> can you put the host in maintenance?
>
>
>
>
> On 04/11/2014 10:43 AM, James James wrote:
>
> I can't delete the old node because it is in Non Responsive
> state. The remove button is stil blank .
>
> In the engine.log I've got this log :
> 2014-04-11 11:40:45,911 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
> (DefaultQuartzScheduler_Worker-88) Command
> GetCapabilitiesVDSCommand(HostName = node1, HostId =
> 36fb6df3-c2c2-4133-86ac-fe50b99ee2e3, vds=Host[node1])
> execution failed. Exception: VDSNetworkException:
> sun.security.provider.certpath.SunCertPathBuilderException:
> unable to find valid certification path to requested target
> 2014-04-11 11:40:48,943 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
> (DefaultQuartzScheduler_Worker-12) Command
> GetCapabilitiesVDSCommand(HostName = node1, HostId =
> 36fb6df3-c2c2-4133-86ac-fe50b99ee2e3, vds=Host[node1])
> execution failed. Exception: VDSNetworkException:
> sun.security.provider.certpath.SunCertPathBuilderException:
> unable to find valid certification path to requested target
>
>
>
>
>
> 2014-04-11 11:06 GMT+02:00 Alon Bar-Lev <alonbl at redhat.com
> <mailto:alonbl at redhat.com> <mailto:alonbl at redhat.com
> <mailto:alonbl at redhat.com>>>:
>
>
>
>
> ----- Original Message -----
> > From: "James James" <jreg2k at gmail.com
> <mailto:jreg2k at gmail.com> <mailto:jreg2k at gmail.com
> <mailto:jreg2k at gmail.com>>>
> > To: dron at redhat.com <mailto:dron at redhat.com>
> <mailto:dron at redhat.com <mailto:dron at redhat.com>>
> > Cc: "users" <users at ovirt.org <mailto:users at ovirt.org>
> <mailto:users at ovirt.org <mailto:users at ovirt.org>>>
> > Sent: Friday, April 11, 2014 12:04:23 PM
> > Subject: Re: [ovirt-users] Re-add a node
> >
> > The engine is the same but the node (node1) has been
> reinstalled ...
>
> So you need to re-add it to the engine.
> Delete the old node at engine side and use the node user
> interface
> to add it to the engine.
>
> >
> >
> > 2014-04-11 10:48 GMT+02:00 James James <
> jreg2k at gmail.com <mailto:jreg2k at gmail.com>
> <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>> > :
>
> >
> >
> >
> > the log contains information about the first node1
> installation ....
> >
> > http://pastebin.com/mZSb2wmD
> >
> >
> > 2014-04-11 10:12 GMT+02:00 Dafna Ron < dron at redhat.com
> <mailto:dron at redhat.com>
> <mailto:dron at redhat.com <mailto:dron at redhat.com>> > :
>
> >
> >
> >
> > please add the host-deploy log from
> /var/log/ovirt-engine/host-
> deploy/
> >
> >
> > On 04/11/2014 12:11 AM, James James wrote:
> >
> >
> >
> > Hi,
> > I don know i the subject is explicit enough but I have a
> problem
> and I hope
> > to find some help here.
> >
> > I had two hosts in my cluster (node1 and node2). I had to
> reinstall node1 due
> > to some networks problem. In the engine, node1 appears
> now "Not
> reponsive"
> > and I can't remove it from the engine ui.
> >
> > Now node1 is back and I want to add it in the cluster but I
> can't. I've got
> > this error (vdsm.log) :
> > BindingXMLRPC::ERROR::2014-04- 11 01
> <tel:2014-04-%2011%2001>
> <tel:2014-04-%2011%2001>:04:42,622::BindingXMLRPC::
>
> > 81::vds::(threaded_start) xml-rpc handler exception
> > Traceback (most recent call last):
> > File "/usr/share/vdsm/ BindingXMLRPC.py", line 77, in
> threaded_start
> > self.server.handle_request()
> > File "/usr/lib64/python2.6/ SocketServer.py", line 278, in
> handle_request
> > self._handle_request_noblock()
> > File "/usr/lib64/python2.6/ SocketServer.py", line 288, in
> > _handle_request_noblock
> > request, client_address = self.get_request()
> > File "/usr/lib64/python2.6/ SocketServer.py", line 456, in
> get_request
> > return self.socket.accept()
> > File "/usr/lib64/python2.6/site- packages/vdsm/
> SecureXMLRPCServer.py", line
> > 136, in accept
> > raise SSL.SSLError("%s, client %s" % (e, address[0]))
> > SSLError: sslv3 alert certificate unknown, client
> 192.168.1.100
> >
> > 192.168.1.100 is the engine's address
> >
> > Can somebody help me ?
> >
> >
> >
> > ______________________________ _________________
> > Users mailing list
> > Users at ovirt.org <mailto:Users at ovirt.org>
> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>
> > http://lists.ovirt.org/ mailman/listinfo/users
> >
> >
> > --
> > Dafna Ron
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org <mailto:Users at ovirt.org>
> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
>
>
>
> --
> Dafna Ron
>
>
--
Dafna Ron
More information about the Users
mailing list