[ovirt-users] Re-add a node
Dafna Ron
dron at redhat.com
Fri Apr 11 08:08:20 EDT 2014
James, Please answer the user's list as well as to me so that other
people can participate as well :)
did you try to press the "confirm host has been rebooted" (right click)
On 04/11/2014 12:41 PM, James James wrote:
>
>
>
> 2014-04-11 13:16 GMT+02:00 Dafna Ron <dron at redhat.com
> <mailto:dron at redhat.com>>:
>
> what is the error message you get when you try to put the host in
> maintenance?
>
>
> I have this message :
>
>
> Error while executing action: Cannot switch Host to Maintenance mode.
> Host is Storage Pool Manager and is in Non Responsive state.
> - If power management is configured, engine will try to fence the host
> automatically.
> - Otherwise, either bring the node back up, or release the SPM resource.
> To do so, verify that the node is really down by right clicking on the
> host and confirm that the node was shutdown manually.
>
>
>
> are there any running vm's reported?
>
>
> No there is no VM running on this host
>
>
>
> Try to press the "confirm host has been rebooted" button and than
> see if you can put the host in maintenance.
>
> If that fails, select the host, in the general tab you will get
> the re-install link.
>
>
>
> I am running ovirt 3.4.0-1. I down't know where is the re-install link
> but I can't see it.
>
> try to re-install, when install fails the host should change
> status to failed installation.
>
>
>
>
> On 04/11/2014 12:09 PM, James James wrote:
>
> No, I can't ....
>
>
> 2014-04-11 12:12 GMT+02:00 Dafna Ron <dron at redhat.com
> <mailto:dron at redhat.com> <mailto:dron at redhat.com
> <mailto:dron at redhat.com>>>:
>
>
> can you put the host in maintenance?
>
>
>
>
> On 04/11/2014 10:43 AM, James James wrote:
>
> I can't delete the old node because it is in Non
> Responsive
> state. The remove button is stil blank .
>
> In the engine.log I've got this log :
> 2014-04-11 11:40:45,911 ERROR
>
> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
> (DefaultQuartzScheduler_Worker-88) Command
> GetCapabilitiesVDSCommand(HostName = node1, HostId =
> 36fb6df3-c2c2-4133-86ac-fe50b99ee2e3, vds=Host[node1])
> execution failed. Exception: VDSNetworkException:
>
> sun.security.provider.certpath.SunCertPathBuilderException:
> unable to find valid certification path to requested
> target
> 2014-04-11 11:40:48,943 ERROR
>
> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
> (DefaultQuartzScheduler_Worker-12) Command
> GetCapabilitiesVDSCommand(HostName = node1, HostId =
> 36fb6df3-c2c2-4133-86ac-fe50b99ee2e3, vds=Host[node1])
> execution failed. Exception: VDSNetworkException:
>
> sun.security.provider.certpath.SunCertPathBuilderException:
> unable to find valid certification path to requested
> target
>
>
>
>
>
> 2014-04-11 11:06 GMT+02:00 Alon Bar-Lev
> <alonbl at redhat.com <mailto:alonbl at redhat.com>
> <mailto:alonbl at redhat.com <mailto:alonbl at redhat.com>>
> <mailto:alonbl at redhat.com <mailto:alonbl at redhat.com>
>
> <mailto:alonbl at redhat.com <mailto:alonbl at redhat.com>>>>:
>
>
>
>
> ----- Original Message -----
> > From: "James James" <jreg2k at gmail.com
> <mailto:jreg2k at gmail.com>
> <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>>
> <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>
> <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>>>>
> > To: dron at redhat.com <mailto:dron at redhat.com>
> <mailto:dron at redhat.com <mailto:dron at redhat.com>>
> <mailto:dron at redhat.com <mailto:dron at redhat.com>
> <mailto:dron at redhat.com <mailto:dron at redhat.com>>>
> > Cc: "users" <users at ovirt.org
> <mailto:users at ovirt.org> <mailto:users at ovirt.org
> <mailto:users at ovirt.org>>
> <mailto:users at ovirt.org <mailto:users at ovirt.org>
> <mailto:users at ovirt.org <mailto:users at ovirt.org>>>>
> > Sent: Friday, April 11, 2014 12:04:23 PM
> > Subject: Re: [ovirt-users] Re-add a node
> >
> > The engine is the same but the node (node1) has been
> reinstalled ...
>
> So you need to re-add it to the engine.
> Delete the old node at engine side and use the
> node user
> interface
> to add it to the engine.
>
> >
> >
> > 2014-04-11 10:48 GMT+02:00 James James <
> jreg2k at gmail.com <mailto:jreg2k at gmail.com>
> <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>>
> <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>
> <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>>> > :
>
>
> >
> >
> >
> > the log contains information about the first node1
> installation ....
> >
> > http://pastebin.com/mZSb2wmD
> >
> >
> > 2014-04-11 10:12 GMT+02:00 Dafna Ron <
> dron at redhat.com <mailto:dron at redhat.com>
> <mailto:dron at redhat.com <mailto:dron at redhat.com>>
> <mailto:dron at redhat.com <mailto:dron at redhat.com>
> <mailto:dron at redhat.com <mailto:dron at redhat.com>>> > :
>
>
> >
> >
> >
> > please add the host-deploy log from
> /var/log/ovirt-engine/host-
> deploy/
> >
> >
> > On 04/11/2014 12:11 AM, James James wrote:
> >
> >
> >
> > Hi,
> > I don know i the subject is explicit enough but
> I have a
> problem
> and I hope
> > to find some help here.
> >
> > I had two hosts in my cluster (node1 and node2).
> I had to
> reinstall node1 due
> > to some networks problem. In the engine, node1
> appears
> now "Not
> reponsive"
> > and I can't remove it from the engine ui.
> >
> > Now node1 is back and I want to add it in the
> cluster but I
> can't. I've got
> > this error (vdsm.log) :
> > BindingXMLRPC::ERROR::2014-04- 11 01
> <tel:2014-04-%2011%2001>
> <tel:2014-04-%2011%2001>
> <tel:2014-04-%2011%2001>:04:42,622::BindingXMLRPC::
>
> > 81::vds::(threaded_start) xml-rpc handler exception
> > Traceback (most recent call last):
> > File "/usr/share/vdsm/ BindingXMLRPC.py", line
> 77, in
> threaded_start
> > self.server.handle_request()
> > File "/usr/lib64/python2.6/ SocketServer.py",
> line 278, in
> handle_request
> > self._handle_request_noblock()
> > File "/usr/lib64/python2.6/ SocketServer.py",
> line 288, in
> > _handle_request_noblock
> > request, client_address = self.get_request()
> > File "/usr/lib64/python2.6/ SocketServer.py",
> line 456, in
> get_request
> > return self.socket.accept()
> > File "/usr/lib64/python2.6/site- packages/vdsm/
> SecureXMLRPCServer.py", line
> > 136, in accept
> > raise SSL.SSLError("%s, client %s" % (e,
> address[0]))
> > SSLError: sslv3 alert certificate unknown, client
> 192.168.1.100
> >
> > 192.168.1.100 is the engine's address
> >
> > Can somebody help me ?
> >
> >
> >
> > ______________________________ _________________
> > Users mailing list
> > Users at ovirt.org <mailto:Users at ovirt.org>
> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
>
>
> > http://lists.ovirt.org/ mailman/listinfo/users
> >
> >
> > --
> > Dafna Ron
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org <mailto:Users at ovirt.org>
> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
>
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
>
>
>
> -- Dafna Ron
>
>
>
>
> --
> Dafna Ron
>
>
--
Dafna Ron
More information about the Users
mailing list