[ovirt-users] Re-add a node
James James
jreg2k at gmail.com
Fri Apr 11 08:23:29 EDT 2014
2014-04-11 14:08 GMT+02:00 Dafna Ron <dron at redhat.com>:
> James, Please answer the user's list as well as to me so that other people
> can participate as well :)
>
Oups ... I will do that ..
>
> did you try to press the "confirm host has been rebooted" (right click)
>
>
Yes but same problem. node1 cannot be in maintenance mode.
node1 is SPM . I will make node1 release the SPM ressource.
>
>
> On 04/11/2014 12:41 PM, James James wrote:
>
>>
>>
>>
>> 2014-04-11 13:16 GMT+02:00 Dafna Ron <dron at redhat.com <mailto:
>> dron at redhat.com>>:
>>
>>
>> what is the error message you get when you try to put the host in
>> maintenance?
>>
>> I have this message :
>>
>>
>> Error while executing action: Cannot switch Host to Maintenance mode.
>> Host is Storage Pool Manager and is in Non Responsive state.
>> - If power management is configured, engine will try to fence the host
>> automatically.
>> - Otherwise, either bring the node back up, or release the SPM resource.
>> To do so, verify that the node is really down by right clicking on the
>> host and confirm that the node was shutdown manually.
>>
>>
>>
>> are there any running vm's reported?
>>
>>
>> No there is no VM running on this host
>>
>>
>>
>> Try to press the "confirm host has been rebooted" button and than
>> see if you can put the host in maintenance.
>>
>> If that fails, select the host, in the general tab you will get
>> the re-install link.
>>
>>
>>
>> I am running ovirt 3.4.0-1. I down't know where is the re-install link
>> but I can't see it.
>>
>> try to re-install, when install fails the host should change
>> status to failed installation.
>>
>>
>>
>>
>> On 04/11/2014 12:09 PM, James James wrote:
>>
>> No, I can't ....
>>
>>
>> 2014-04-11 12:12 GMT+02:00 Dafna Ron <dron at redhat.com
>> <mailto:dron at redhat.com> <mailto:dron at redhat.com
>>
>> <mailto:dron at redhat.com>>>:
>>
>>
>> can you put the host in maintenance?
>>
>>
>>
>>
>> On 04/11/2014 10:43 AM, James James wrote:
>>
>> I can't delete the old node because it is in Non
>> Responsive
>> state. The remove button is stil blank .
>>
>> In the engine.log I've got this log :
>> 2014-04-11 11:40:45,911 ERROR
>> [org.ovirt.engine.core.vdsbroker.vdsbroker.
>> GetCapabilitiesVDSCommand]
>> (DefaultQuartzScheduler_Worker-88) Command
>> GetCapabilitiesVDSCommand(HostName = node1, HostId =
>> 36fb6df3-c2c2-4133-86ac-fe50b99ee2e3, vds=Host[node1])
>> execution failed. Exception: VDSNetworkException:
>> sun.security.provider.certpath.
>> SunCertPathBuilderException:
>> unable to find valid certification path to requested
>> target
>> 2014-04-11 11:40:48,943 ERROR
>> [org.ovirt.engine.core.vdsbroker.vdsbroker.
>> GetCapabilitiesVDSCommand]
>> (DefaultQuartzScheduler_Worker-12) Command
>> GetCapabilitiesVDSCommand(HostName = node1, HostId =
>> 36fb6df3-c2c2-4133-86ac-fe50b99ee2e3, vds=Host[node1])
>> execution failed. Exception: VDSNetworkException:
>> sun.security.provider.certpath.
>> SunCertPathBuilderException:
>> unable to find valid certification path to requested
>> target
>>
>>
>>
>>
>>
>> 2014-04-11 11:06 GMT+02:00 Alon Bar-Lev
>> <alonbl at redhat.com <mailto:alonbl at redhat.com>
>> <mailto:alonbl at redhat.com <mailto:alonbl at redhat.com>>
>> <mailto:alonbl at redhat.com <mailto:alonbl at redhat.com>
>>
>> <mailto:alonbl at redhat.com <mailto:alonbl at redhat.com>>>>:
>>
>>
>>
>>
>>
>> ----- Original Message -----
>> > From: "James James" <jreg2k at gmail.com
>> <mailto:jreg2k at gmail.com>
>> <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>>
>> <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>
>> <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>>>>
>> > To: dron at redhat.com <mailto:dron at redhat.com>
>> <mailto:dron at redhat.com <mailto:dron at redhat.com>>
>> <mailto:dron at redhat.com <mailto:dron at redhat.com>
>> <mailto:dron at redhat.com <mailto:dron at redhat.com>>>
>> > Cc: "users" <users at ovirt.org
>> <mailto:users at ovirt.org> <mailto:users at ovirt.org
>> <mailto:users at ovirt.org>>
>> <mailto:users at ovirt.org <mailto:users at ovirt.org>
>> <mailto:users at ovirt.org <mailto:users at ovirt.org>>>>
>> > Sent: Friday, April 11, 2014 12:04:23 PM
>> > Subject: Re: [ovirt-users] Re-add a node
>> >
>> > The engine is the same but the node (node1) has been
>> reinstalled ...
>>
>> So you need to re-add it to the engine.
>> Delete the old node at engine side and use the
>> node user
>> interface
>> to add it to the engine.
>>
>> >
>> >
>> > 2014-04-11 10:48 GMT+02:00 James James <
>> jreg2k at gmail.com <mailto:jreg2k at gmail.com>
>> <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>>
>> <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>
>> <mailto:jreg2k at gmail.com <mailto:jreg2k at gmail.com>>> > :
>>
>>
>> >
>> >
>> >
>> > the log contains information about the first node1
>> installation ....
>> >
>> > http://pastebin.com/mZSb2wmD
>> >
>> >
>> > 2014-04-11 10:12 GMT+02:00 Dafna Ron <
>> dron at redhat.com <mailto:dron at redhat.com>
>> <mailto:dron at redhat.com <mailto:dron at redhat.com>>
>> <mailto:dron at redhat.com <mailto:dron at redhat.com>
>> <mailto:dron at redhat.com <mailto:dron at redhat.com>>> > :
>>
>>
>> >
>> >
>> >
>> > please add the host-deploy log from
>> /var/log/ovirt-engine/host-
>> deploy/
>> >
>> >
>> > On 04/11/2014 12:11 AM, James James wrote:
>> >
>> >
>> >
>> > Hi,
>> > I don know i the subject is explicit enough but
>> I have a
>> problem
>> and I hope
>> > to find some help here.
>> >
>> > I had two hosts in my cluster (node1 and node2).
>> I had to
>> reinstall node1 due
>> > to some networks problem. In the engine, node1
>> appears
>> now "Not
>> reponsive"
>> > and I can't remove it from the engine ui.
>> >
>> > Now node1 is back and I want to add it in the
>> cluster but I
>> can't. I've got
>> > this error (vdsm.log) :
>> > BindingXMLRPC::ERROR::2014-04- 11 01
>> <tel:2014-04-%2011%2001>
>> <tel:2014-04-%2011%2001>
>> <tel:2014-04-%2011%2001>:04:42,622::BindingXMLRPC::
>>
>> > 81::vds::(threaded_start) xml-rpc handler exception
>> > Traceback (most recent call last):
>> > File "/usr/share/vdsm/ BindingXMLRPC.py", line
>> 77, in
>> threaded_start
>> > self.server.handle_request()
>> > File "/usr/lib64/python2.6/ SocketServer.py",
>> line 278, in
>> handle_request
>> > self._handle_request_noblock()
>> > File "/usr/lib64/python2.6/ SocketServer.py",
>> line 288, in
>> > _handle_request_noblock
>> > request, client_address = self.get_request()
>> > File "/usr/lib64/python2.6/ SocketServer.py",
>> line 456, in
>> get_request
>> > return self.socket.accept()
>> > File "/usr/lib64/python2.6/site- packages/vdsm/
>> SecureXMLRPCServer.py", line
>> > 136, in accept
>> > raise SSL.SSLError("%s, client %s" % (e,
>> address[0]))
>> > SSLError: sslv3 alert certificate unknown, client
>> 192.168.1.100
>> >
>> > 192.168.1.100 is the engine's address
>> >
>> > Can somebody help me ?
>> >
>> >
>> >
>> > ______________________________ _________________
>> > Users mailing list
>> > Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
>>
>>
>> > http://lists.ovirt.org/ mailman/listinfo/users
>> >
>> >
>> > --
>> > Dafna Ron
>> >
>> >
>> >
>> > _______________________________________________
>> > Users mailing list
>> > Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
>>
>> > http://lists.ovirt.org/mailman/listinfo/users
>> >
>>
>>
>>
>>
>> -- Dafna Ron
>>
>>
>>
>>
>> -- Dafna Ron
>>
>>
>>
>
> --
> Dafna Ron
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140411/07fdb73d/attachment-0001.html>
More information about the Users
mailing list