[ovirt-users] [Gluster-users] Gluster command [<UNKNOWN>] failed on server...
Punit Dambiwal
hypunit at gmail.com
Wed Dec 3 05:24:27 UTC 2014
Hi Kaushal,
This is the host...which i rebooted...would you mind to let me know how i
can make the glusterd sevice come up after network...i am using
centos7...if network is the issue...
On Wed, Dec 3, 2014 at 11:54 AM, Kaushal M <kshlmster at gmail.com> wrote:
> This peer cannot be identified.
>
> " [2014-12-03 02:29:25.998153] D
> [glusterd-peer-utils.c:121:glusterd_peerinfo_find_by_hostname]
> 0-management: Unable to find friend: cpu05.zne01.hkg1.ovt.36stack.com"
>
> I don't know why this address is not being resolved during boot time. If
> this is a valid peer, the the only reason I can think of this that the
> network is not up.
>
> If you had previously detached the peer forcefully, the that could have
> left stale entries in some volumes. In this case as well, GlusterD will
> fail to identify the peer.
>
> Do either of these reasons seem a possibility to you?
> On Dec 3, 2014 8:07 AM, "Punit Dambiwal" <hypunit at gmail.com> wrote:
>
>> Hi Kaushal,
>>
>> Please find the logs here :- http://ur1.ca/iyoe5 and http://ur1.ca/iyoed
>>
>> On Tue, Dec 2, 2014 at 10:43 PM, Kaushal M <kshlmster at gmail.com> wrote:
>>
>>> Hey Punit,
>>> In the logs you've provided, GlusterD appears to be running correctly.
>>> Could you provide the logs for the time period when GlusterD attempts to
>>> start but fails.
>>>
>>> ~kaushal
>>> On Dec 2, 2014 8:03 PM, "Punit Dambiwal" <hypunit at gmail.com> wrote:
>>>
>>>> Hi Kaushal,
>>>>
>>>> Please find the logs here :- http://ur1.ca/iyhs5 and
>>>> http://ur1.ca/iyhue
>>>>
>>>> Thanks,
>>>> punit
>>>>
>>>>
>>>> On Tue, Dec 2, 2014 at 12:00 PM, Kaushal M <kshlmster at gmail.com> wrote:
>>>>
>>>>> Hey Punit,
>>>>> Could you start Glusterd in debug mode and provide the logs here?
>>>>> To start it in debug mode, append '-LDEBUG' to the ExecStart line in
>>>>> the service file.
>>>>>
>>>>> ~kaushal
>>>>>
>>>>> On Mon, Dec 1, 2014 at 9:05 AM, Punit Dambiwal <hypunit at gmail.com>
>>>>> wrote:
>>>>> > Hi,
>>>>> >
>>>>> > Can Any body help me on this ??
>>>>> >
>>>>> > On Thu, Nov 27, 2014 at 9:29 AM, Punit Dambiwal <hypunit at gmail.com>
>>>>> wrote:
>>>>> >>
>>>>> >> Hi Kaushal,
>>>>> >>
>>>>> >> Thanks for the detailed reply....let me explain my setup first :-
>>>>> >>
>>>>> >> 1. Ovirt Engine
>>>>> >> 2. 4* host as well as storage machine (Host and gluster combined)
>>>>> >> 3. Every host has 24 bricks...
>>>>> >>
>>>>> >> Now whenever the host machine reboot...it can come up but can not
>>>>> join the
>>>>> >> cluster again and through the following error "Gluster command
>>>>> [<UNKNOWN>]
>>>>> >> failed on server.."
>>>>> >>
>>>>> >> Please check my comment in line :-
>>>>> >>
>>>>> >> 1. Use the same string for doing the peer probe and for the brick
>>>>> address
>>>>> >> during volume create/add-brick. Ideally, we suggest you use properly
>>>>> >> resolvable FQDNs everywhere. If that is not possible, then use only
>>>>> IP
>>>>> >> addresses. Try to avoid short names.
>>>>> >> ---------------
>>>>> >> [root at cpu05 ~]# gluster peer status
>>>>> >> Number of Peers: 3
>>>>> >>
>>>>> >> Hostname: cpu03.stack.com
>>>>> >> Uuid: 5729b8c4-e80d-4353-b456-6f467bddbdfb
>>>>> >> State: Peer in Cluster (Connected)
>>>>> >>
>>>>> >> Hostname: cpu04.stack.com
>>>>> >> Uuid: d272b790-c4b2-4bed-ba68-793656e6d7b0
>>>>> >> State: Peer in Cluster (Connected)
>>>>> >> Other names:
>>>>> >> 10.10.0.8
>>>>> >>
>>>>> >> Hostname: cpu02.stack.com
>>>>> >> Uuid: 8d8a7041-950e-40d0-85f9-58d14340ca25
>>>>> >> State: Peer in Cluster (Connected)
>>>>> >> [root at cpu05 ~]#
>>>>> >> ----------------
>>>>> >> 2. During boot up, make sure to launch glusterd only after the
>>>>> network is
>>>>> >> up. This will allow the new peer identification mechanism to do its
>>>>> >> job correctly.
>>>>> >> >> I think the service itself doing the same job....
>>>>> >>
>>>>> >> [root at cpu05 ~]# cat /usr/lib/systemd/system/glusterd.service
>>>>> >> [Unit]
>>>>> >> Description=GlusterFS, a clustered file-system server
>>>>> >> After=network.target rpcbind.service
>>>>> >> Before=network-online.target
>>>>> >>
>>>>> >> [Service]
>>>>> >> Type=forking
>>>>> >> PIDFile=/var/run/glusterd.pid
>>>>> >> LimitNOFILE=65536
>>>>> >> ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid
>>>>> >> KillMode=process
>>>>> >>
>>>>> >> [Install]
>>>>> >> WantedBy=multi-user.target
>>>>> >> [root at cpu05 ~]#
>>>>> >> --------------------
>>>>> >>
>>>>> >> gluster logs :-
>>>>> >>
>>>>> >> [2014-11-24 09:22:22.147471] I [MSGID: 100030]
>>>>> [glusterfsd.c:2018:main]
>>>>> >> 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version
>>>>> 3.6.1
>>>>> >> (args: /usr/sbin/glusterd -p /var/run/glusterd.pid)
>>>>> >> [2014-11-24 09:22:22.151565] I [glusterd.c:1214:init] 0-management:
>>>>> >> Maximum allowed open file descriptors set to 65536
>>>>> >> [2014-11-24 09:22:22.151599] I [glusterd.c:1259:init] 0-management:
>>>>> Using
>>>>> >> /var/lib/glusterd as working directory
>>>>> >> [2014-11-24 09:22:22.155216] W [rdma.c:4195:__gf_rdma_ctx_create]
>>>>> >> 0-rpc-transport/rdma: rdma_cm event channel creation failed (No
>>>>> such device)
>>>>> >> [2014-11-24 09:22:22.155264] E [rdma.c:4483:init] 0-rdma.management:
>>>>> >> Failed to initialize IB Device
>>>>> >> [2014-11-24 09:22:22.155285] E
>>>>> [rpc-transport.c:333:rpc_transport_load]
>>>>> >> 0-rpc-transport: 'rdma' initialization failed
>>>>> >> [2014-11-24 09:22:22.155354] W
>>>>> [rpcsvc.c:1524:rpcsvc_transport_create]
>>>>> >> 0-rpc-service: cannot create listener, initing the transport failed
>>>>> >> [2014-11-24 09:22:22.156290] I
>>>>> >> [glusterd.c:413:glusterd_check_gsync_present] 0-glusterd:
>>>>> geo-replication
>>>>> >> module not installed in the system
>>>>> >> [2014-11-24 09:22:22.161318] I
>>>>> >> [glusterd-store.c:2043:glusterd_restore_op_version] 0-glusterd:
>>>>> retrieved
>>>>> >> op-version: 30600
>>>>> >> [2014-11-24 09:22:22.821800] I
>>>>> >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo]
>>>>> 0-management:
>>>>> >> connect returned 0
>>>>> >> [2014-11-24 09:22:22.825810] I
>>>>> >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo]
>>>>> 0-management:
>>>>> >> connect returned 0
>>>>> >> [2014-11-24 09:22:22.828705] I
>>>>> >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo]
>>>>> 0-management:
>>>>> >> connect returned 0
>>>>> >> [2014-11-24 09:22:22.828771] I
>>>>> [rpc-clnt.c:969:rpc_clnt_connection_init]
>>>>> >> 0-management: setting frame-timeout to 600
>>>>> >> [2014-11-24 09:22:22.832670] I
>>>>> [rpc-clnt.c:969:rpc_clnt_connection_init]
>>>>> >> 0-management: setting frame-timeout to 600
>>>>> >> [2014-11-24 09:22:22.835919] I
>>>>> [rpc-clnt.c:969:rpc_clnt_connection_init]
>>>>> >> 0-management: setting frame-timeout to 600
>>>>> >> [2014-11-24 09:22:22.840209] E
>>>>> >> [glusterd-store.c:4248:glusterd_resolve_all_bricks] 0-glusterd:
>>>>> resolve
>>>>> >> brick failed in restore
>>>>> >> [2014-11-24 09:22:22.840233] E [xlator.c:425:xlator_init]
>>>>> 0-management:
>>>>> >> Initialization of volume 'management' failed, review your volfile
>>>>> again
>>>>> >> [2014-11-24 09:22:22.840245] E [graph.c:322:glusterfs_graph_init]
>>>>> >> 0-management: initializing translator failed
>>>>> >> [2014-11-24 09:22:22.840264] E
>>>>> [graph.c:525:glusterfs_graph_activate]
>>>>> >> 0-graph: init failed
>>>>> >> [2014-11-24 09:22:22.840754] W [glusterfsd.c:1194:cleanup_and_exit]
>>>>> (-->
>>>>> >> 0-: received signum (0), shutting down
>>>>> >>
>>>>> >> Thanks,
>>>>> >> Punit
>>>>> >>
>>>>> >>
>>>>> >>
>>>>> >>
>>>>> >> On Wed, Nov 26, 2014 at 7:14 PM, Kaushal M <kshlmster at gmail.com>
>>>>> wrote:
>>>>> >>>
>>>>> >>> Based on the logs I can guess that glusterd is being started before
>>>>> >>> the network has come up and that the addresses given to bricks do
>>>>> not
>>>>> >>> directly match the addresses used in during peer probe.
>>>>> >>>
>>>>> >>> The gluster_after_reboot log has the line "[2014-11-25
>>>>> >>> 06:46:09.972113] E
>>>>> [glusterd-store.c:2632:glusterd_resolve_all_bricks]
>>>>> >>> 0-glusterd: resolve brick failed in restore".
>>>>> >>>
>>>>> >>> Brick resolution fails when glusterd cannot match the address for
>>>>> the
>>>>> >>> brick, with one of the peers. Brick resolution happens in two
>>>>> phases,
>>>>> >>> 1. We first try to identify the peer by performing string
>>>>> comparisions
>>>>> >>> with the brick address and the peer addresses (The peer names will
>>>>> be
>>>>> >>> the names/addresses that were given when the peer was probed).
>>>>> >>> 2. If we don't find a match from step 1, we will then resolve all
>>>>> the
>>>>> >>> brick address and the peer addresses into addrinfo structs, and
>>>>> then
>>>>> >>> compare these structs to find a match. This process should
>>>>> generally
>>>>> >>> find a match if available. This will fail only if the network is
>>>>> not
>>>>> >>> up yet as we cannot resolve addresses.
>>>>> >>>
>>>>> >>> The above steps are applicable only to glusterfs versions >=3.6.
>>>>> They
>>>>> >>> were introduced to reduce problems with peer identification, like
>>>>> the
>>>>> >>> one you encountered
>>>>> >>>
>>>>> >>> Since both of the steps failed to find a match in one run, but
>>>>> >>> succeeded later, we can come to the conclusion that,
>>>>> >>> a) the bricks don't have the exact same string used in peer probe
>>>>> for
>>>>> >>> their addresses as step 1 failed, and
>>>>> >>> b) the network was not up in the initial run, as step 2 failed
>>>>> during
>>>>> >>> the initial run, but passed in the second run.
>>>>> >>>
>>>>> >>> Please let me know if my conclusion is correct.
>>>>> >>>
>>>>> >>> If it is, you can solve your problem in two ways.
>>>>> >>> 1. Use the same string for doing the peer probe and for the brick
>>>>> >>> address during volume create/add-brick. Ideally, we suggest you use
>>>>> >>> properly resolvable FQDNs everywhere. If that is not possible, then
>>>>> >>> use only IP addresses. Try to avoid short names.
>>>>> >>> 2. During boot up, make sure to launch glusterd only after the
>>>>> network
>>>>> >>> is up. This will allow the new peer identification mechanism to do
>>>>> its
>>>>> >>> job correctly.
>>>>> >>>
>>>>> >>>
>>>>> >>> If you have already followed these steps and yet still hit the
>>>>> >>> problem, then please provide more information (setup, logs, etc.).
>>>>> It
>>>>> >>> could be much different problem that you are facing.
>>>>> >>>
>>>>> >>> ~kaushal
>>>>> >>>
>>>>> >>> On Wed, Nov 26, 2014 at 4:01 PM, Punit Dambiwal <hypunit at gmail.com
>>>>> >
>>>>> >>> wrote:
>>>>> >>> > Is there any one can help on this ??
>>>>> >>> >
>>>>> >>> > Thanks,
>>>>> >>> > punit
>>>>> >>> >
>>>>> >>> > On Wed, Nov 26, 2014 at 9:42 AM, Punit Dambiwal <
>>>>> hypunit at gmail.com>
>>>>> >>> > wrote:
>>>>> >>> >>
>>>>> >>> >> Hi,
>>>>> >>> >>
>>>>> >>> >> My Glusterfs version is :- glusterfs-3.6.1-1.el7
>>>>> >>> >>
>>>>> >>> >> On Wed, Nov 26, 2014 at 1:59 AM, Kanagaraj Mayilsamy
>>>>> >>> >> <kmayilsa at redhat.com>
>>>>> >>> >> wrote:
>>>>> >>> >>>
>>>>> >>> >>> [+Gluster-users at gluster.org]
>>>>> >>> >>>
>>>>> >>> >>> "Initialization of volume 'management' failed, review your
>>>>> volfile
>>>>> >>> >>> again", glusterd throws this error when the service is started
>>>>> >>> >>> automatically
>>>>> >>> >>> after the reboot. But the service is successfully started later
>>>>> >>> >>> manually by
>>>>> >>> >>> the user.
>>>>> >>> >>>
>>>>> >>> >>> can somebody from gluster-users please help on this?
>>>>> >>> >>>
>>>>> >>> >>> glusterfs version: 3.5.1
>>>>> >>> >>>
>>>>> >>> >>> Thanks,
>>>>> >>> >>> Kanagaraj
>>>>> >>> >>>
>>>>> >>> >>> ----- Original Message -----
>>>>> >>> >>> > From: "Punit Dambiwal" <hypunit at gmail.com>
>>>>> >>> >>> > To: "Kanagaraj" <kmayilsa at redhat.com>
>>>>> >>> >>> > Cc: users at ovirt.org
>>>>> >>> >>> > Sent: Tuesday, November 25, 2014 7:24:45 PM
>>>>> >>> >>> > Subject: Re: [ovirt-users] Gluster command [<UNKNOWN>]
>>>>> failed on
>>>>> >>> >>> > server...
>>>>> >>> >>> >
>>>>> >>> >>> > Hi Kanagraj,
>>>>> >>> >>> >
>>>>> >>> >>> > Please check the attached log files....i didn't find any
>>>>> thing
>>>>> >>> >>> > special....
>>>>> >>> >>> >
>>>>> >>> >>> > On Tue, Nov 25, 2014 at 12:12 PM, Kanagaraj <
>>>>> kmayilsa at redhat.com>
>>>>> >>> >>> > wrote:
>>>>> >>> >>> >
>>>>> >>> >>> > > Do you see any errors in
>>>>> >>> >>> > > /var/log/glusterfs/etc-glusterfs-glusterd.vol.log or
>>>>> vdsm.log
>>>>> >>> >>> > > when
>>>>> >>> >>> > > the
>>>>> >>> >>> > > service is trying to start automatically after the reboot?
>>>>> >>> >>> > >
>>>>> >>> >>> > > Thanks,
>>>>> >>> >>> > > Kanagaraj
>>>>> >>> >>> > >
>>>>> >>> >>> > >
>>>>> >>> >>> > > On 11/24/2014 08:13 PM, Punit Dambiwal wrote:
>>>>> >>> >>> > >
>>>>> >>> >>> > > Hi Kanagaraj,
>>>>> >>> >>> > >
>>>>> >>> >>> > > Yes...once i will start the gluster service and then vdsmd
>>>>> >>> >>> > > ...the
>>>>> >>> >>> > > host
>>>>> >>> >>> > > can connect to cluster...but the question is why it's not
>>>>> started
>>>>> >>> >>> > > even it
>>>>> >>> >>> > > has chkconfig enabled...
>>>>> >>> >>> > >
>>>>> >>> >>> > > I have tested it in two host cluster
>>>>> environment...(Centos 6.6
>>>>> >>> >>> > > and
>>>>> >>> >>> > > centos 7.0) on both hypervisior cluster..it's failed to
>>>>> reconnect
>>>>> >>> >>> > > in
>>>>> >>> >>> > > to
>>>>> >>> >>> > > cluster after reboot....
>>>>> >>> >>> > >
>>>>> >>> >>> > > In both the environment glusterd enabled for next
>>>>> boot....but
>>>>> >>> >>> > > it's
>>>>> >>> >>> > > failed with the same error....seems it's bug in either
>>>>> gluster or
>>>>> >>> >>> > > Ovirt ??
>>>>> >>> >>> > >
>>>>> >>> >>> > > Please help me to find the workaround here if can not
>>>>> resolve
>>>>> >>> >>> > > it...as
>>>>> >>> >>> > > without this the Host machine can not connect after
>>>>> >>> >>> > > reboot....that
>>>>> >>> >>> > > means
>>>>> >>> >>> > > engine will consider it as down and every time need to
>>>>> manually
>>>>> >>> >>> > > start
>>>>> >>> >>> > > the
>>>>> >>> >>> > > gluster service and vdsmd... ??
>>>>> >>> >>> > >
>>>>> >>> >>> > > Thanks,
>>>>> >>> >>> > > Punit
>>>>> >>> >>> > >
>>>>> >>> >>> > > On Mon, Nov 24, 2014 at 10:20 PM, Kanagaraj <
>>>>> kmayilsa at redhat.com>
>>>>> >>> >>> > > wrote:
>>>>> >>> >>> > >
>>>>> >>> >>> > >> From vdsm.log "error: Connection failed. Please check if
>>>>> >>> >>> > >> gluster
>>>>> >>> >>> > >> daemon
>>>>> >>> >>> > >> is operational."
>>>>> >>> >>> > >>
>>>>> >>> >>> > >> Starting glusterd service should fix this issue. 'service
>>>>> >>> >>> > >> glusterd
>>>>> >>> >>> > >> start'
>>>>> >>> >>> > >> But i am wondering why the glusterd was not started
>>>>> >>> >>> > >> automatically
>>>>> >>> >>> > >> after
>>>>> >>> >>> > >> the reboot.
>>>>> >>> >>> > >>
>>>>> >>> >>> > >> Thanks,
>>>>> >>> >>> > >> Kanagaraj
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> >>> >>> > >> On 11/24/2014 07:18 PM, Punit Dambiwal wrote:
>>>>> >>> >>> > >>
>>>>> >>> >>> > >> Hi Kanagaraj,
>>>>> >>> >>> > >>
>>>>> >>> >>> > >> Please find the attached VDSM logs :-
>>>>> >>> >>> > >>
>>>>> >>> >>> > >> ----------------
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> 21:41:17,182::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
>>>>> >>> >>> > >> Owner.cancelAll requests {}
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >>
>>>>> 21:41:17,182::task::993::Storage.TaskManager.Task::(_decref)
>>>>> >>> >>> > >> Task=`1691d409-9b27-4585-8281-5ec26154367a`::ref 0
>>>>> aborting
>>>>> >>> >>> > >> False
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> 21:41:32,393::task::595::Storage.TaskManager.Task::(_updateState)
>>>>> >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from
>>>>> state
>>>>> >>> >>> > >> init
>>>>> >>> >>> > >> ->
>>>>> >>> >>> > >> state preparing
>>>>> >>> >>> > >> Thread-13::INFO::2014-11-24
>>>>> >>> >>> > >> 21:41:32,393::logUtils::44::dispatcher::(wrapper) Run and
>>>>> >>> >>> > >> protect:
>>>>> >>> >>> > >> repoStats(options=None)
>>>>> >>> >>> > >> Thread-13::INFO::2014-11-24
>>>>> >>> >>> > >> 21:41:32,393::logUtils::47::dispatcher::(wrapper) Run and
>>>>> >>> >>> > >> protect:
>>>>> >>> >>> > >> repoStats, Return response: {}
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >>
>>>>> 21:41:32,393::task::1191::Storage.TaskManager.Task::(prepare)
>>>>> >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::finished: {}
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> 21:41:32,394::task::595::Storage.TaskManager.Task::(_updateState)
>>>>> >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from
>>>>> state
>>>>> >>> >>> > >> preparing
>>>>> >>> >>> > >> ->
>>>>> >>> >>> > >> state finished
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> 21:41:32,394::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)
>>>>> >>> >>> > >> Owner.releaseAll requests {} resources {}
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> 21:41:32,394::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
>>>>> >>> >>> > >> Owner.cancelAll requests {}
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >>
>>>>> 21:41:32,394::task::993::Storage.TaskManager.Task::(_decref)
>>>>> >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::ref 0
>>>>> aborting
>>>>> >>> >>> > >> False
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,550::BindingXMLRPC::1132::vds::(wrapper) client
>>>>> >>> >>> > >> [10.10.10.2]::call
>>>>> >>> >>> > >> getCapabilities with () {}
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,553::utils::738::root::(execCmd)
>>>>> >>> >>> > >> /sbin/ip route show to 0.0.0.0/0 table all (cwd None)
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,560::utils::758::root::(execCmd)
>>>>> >>> >>> > >> SUCCESS: <err> = ''; <rc> = 0
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,588::caps::728::root::(_getKeyPackages) rpm
>>>>> package
>>>>> >>> >>> > >> ('gluster-swift',) not found
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,592::caps::728::root::(_getKeyPackages) rpm
>>>>> package
>>>>> >>> >>> > >> ('gluster-swift-object',) not found
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,593::caps::728::root::(_getKeyPackages) rpm
>>>>> package
>>>>> >>> >>> > >> ('gluster-swift-plugin',) not found
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm
>>>>> package
>>>>> >>> >>> > >> ('gluster-swift-account',) not found
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm
>>>>> package
>>>>> >>> >>> > >> ('gluster-swift-proxy',) not found
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm
>>>>> package
>>>>> >>> >>> > >> ('gluster-swift-doc',) not found
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm
>>>>> package
>>>>> >>> >>> > >> ('gluster-swift-container',) not found
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm
>>>>> package
>>>>> >>> >>> > >> ('glusterfs-geo-replication',) not found
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,600::caps::646::root::(get)
>>>>> >>> >>> > >> VirtioRNG DISABLED: libvirt version 0.10.2-29.el6_5.9
>>>>> required
>>>>> >>> >>> > >> >=
>>>>> >>> >>> > >> 0.10.2-31
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,603::BindingXMLRPC::1139::vds::(wrapper) return
>>>>> >>> >>> > >> getCapabilities
>>>>> >>> >>> > >> with {'status': {'message': 'Done', 'code': 0}, 'info':
>>>>> >>> >>> > >> {'HBAInventory':
>>>>> >>> >>> > >> {'iSCSI': [{'InitiatorName':
>>>>> >>> >>> > >> 'iqn.1994-05.com.redhat:32151ce183c8'}],
>>>>> >>> >>> > >> 'FC':
>>>>> >>> >>> > >> []}, 'packages2': {'kernel': {'release': '431.el6.x86_64',
>>>>> >>> >>> > >> 'buildtime':
>>>>> >>> >>> > >> 1385061309.0, 'version': '2.6.32'}, 'glusterfs-rdma':
>>>>> >>> >>> > >> {'release':
>>>>> >>> >>> > >> '1.el6',
>>>>> >>> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'},
>>>>> 'glusterfs-fuse':
>>>>> >>> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L, 'version':
>>>>> >>> >>> > >> '3.5.1'},
>>>>> >>> >>> > >> 'spice-server': {'release': '6.el6_5.2', 'buildtime':
>>>>> >>> >>> > >> 1402324637L,
>>>>> >>> >>> > >> 'version': '0.12.4'}, 'vdsm': {'release':
>>>>> '1.gitdb83943.el6',
>>>>> >>> >>> > >> 'buildtime':
>>>>> >>> >>> > >> 1412784567L, 'version': '4.16.7'}, 'qemu-kvm': {'release':
>>>>> >>> >>> > >> '2.415.el6_5.10', 'buildtime': 1402435700L, 'version':
>>>>> >>> >>> > >> '0.12.1.2'},
>>>>> >>> >>> > >> 'qemu-img': {'release': '2.415.el6_5.10', 'buildtime':
>>>>> >>> >>> > >> 1402435700L,
>>>>> >>> >>> > >> 'version': '0.12.1.2'}, 'libvirt': {'release':
>>>>> '29.el6_5.9',
>>>>> >>> >>> > >> 'buildtime':
>>>>> >>> >>> > >> 1402404612L, 'version': '0.10.2'}, 'glusterfs':
>>>>> {'release':
>>>>> >>> >>> > >> '1.el6',
>>>>> >>> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'}, 'mom':
>>>>> >>> >>> > >> {'release':
>>>>> >>> >>> > >> '2.el6',
>>>>> >>> >>> > >> 'buildtime': 1403794344L, 'version': '0.4.1'},
>>>>> >>> >>> > >> 'glusterfs-server':
>>>>> >>> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L, 'version':
>>>>> >>> >>> > >> '3.5.1'}},
>>>>> >>> >>> > >> 'numaNodeDistance': {'1': [20, 10], '0': [10, 20]},
>>>>> 'cpuModel':
>>>>> >>> >>> > >> 'Intel(R)
>>>>> >>> >>> > >> Xeon(R) CPU X5650 @ 2.67GHz', 'liveMerge':
>>>>> 'false',
>>>>> >>> >>> > >> 'hooks':
>>>>> >>> >>> > >> {},
>>>>> >>> >>> > >> 'cpuSockets': '2', 'vmTypes': ['kvm'], 'selinux':
>>>>> {'mode': '1'},
>>>>> >>> >>> > >> 'kdumpStatus': 0, 'supportedProtocols': ['2.2', '2.3'],
>>>>> >>> >>> > >> 'networks':
>>>>> >>> >>> > >> {'ovirtmgmt': {'iface': u'bond0.10', 'addr':
>>>>> '43.252.176.16',
>>>>> >>> >>> > >> 'bridged':
>>>>> >>> >>> > >> False, 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'],
>>>>> 'mtu':
>>>>> >>> >>> > >> '1500',
>>>>> >>> >>> > >> 'bootproto4': 'none', 'netmask': '255.255.255.0',
>>>>> 'ipv4addrs':
>>>>> >>> >>> > >> ['
>>>>> >>> >>> > >> 43.252.176.16/24' <http://43.252.176.16/24%27>],
>>>>> 'interface':
>>>>> >>> >>> > >> u'bond0.10', 'ipv6gateway': '::', 'gateway':
>>>>> '43.25.17.1'},
>>>>> >>> >>> > >> 'Internal':
>>>>> >>> >>> > >> {'iface': 'Internal', 'addr': '', 'cfg': {'DEFROUTE':
>>>>> 'no',
>>>>> >>> >>> > >> 'HOTPLUG':
>>>>> >>> >>> > >> 'no', 'MTU': '9000', 'DELAY': '0', 'NM_CONTROLLED': 'no',
>>>>> >>> >>> > >> 'BOOTPROTO':
>>>>> >>> >>> > >> 'none', 'STP': 'off', 'DEVICE': 'Internal', 'TYPE':
>>>>> 'Bridge',
>>>>> >>> >>> > >> 'ONBOOT':
>>>>> >>> >>> > >> 'no'}, 'bridged': True, 'ipv6addrs':
>>>>> >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'],
>>>>> >>> >>> > >> 'gateway': '', 'bootproto4': 'none', 'netmask': '', 'stp':
>>>>> >>> >>> > >> 'off',
>>>>> >>> >>> > >> 'ipv4addrs': [], 'mtu': '9000', 'ipv6gateway': '::',
>>>>> 'ports':
>>>>> >>> >>> > >> ['bond1.100']}, 'storage': {'iface': u'bond1', 'addr':
>>>>> >>> >>> > >> '10.10.10.6',
>>>>> >>> >>> > >> 'bridged': False, 'ipv6addrs':
>>>>> ['fe80::210:18ff:fecd:daac/64'],
>>>>> >>> >>> > >> 'mtu':
>>>>> >>> >>> > >> '9000', 'bootproto4': 'none', 'netmask': '255.255.255.0',
>>>>> >>> >>> > >> 'ipv4addrs': ['
>>>>> >>> >>> > >> 10.10.10.6/24' <http://10.10.10.6/24%27>], 'interface':
>>>>> >>> >>> > >> u'bond1',
>>>>> >>> >>> > >> 'ipv6gateway': '::', 'gateway': ''}, 'VMNetwork':
>>>>> {'iface':
>>>>> >>> >>> > >> 'VMNetwork',
>>>>> >>> >>> > >> 'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': 'no',
>>>>> 'MTU':
>>>>> >>> >>> > >> '1500',
>>>>> >>> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none',
>>>>> 'STP':
>>>>> >>> >>> > >> 'off',
>>>>> >>> >>> > >> 'DEVICE': 'VMNetwork', 'TYPE': 'Bridge', 'ONBOOT': 'no'},
>>>>> >>> >>> > >> 'bridged':
>>>>> >>> >>> > >> True,
>>>>> >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'gateway':
>>>>> '',
>>>>> >>> >>> > >> 'bootproto4':
>>>>> >>> >>> > >> 'none', 'netmask': '', 'stp': 'off', 'ipv4addrs': [],
>>>>> 'mtu':
>>>>> >>> >>> > >> '1500',
>>>>> >>> >>> > >> 'ipv6gateway': '::', 'ports': ['bond0.36']}}, 'bridges':
>>>>> >>> >>> > >> {'Internal':
>>>>> >>> >>> > >> {'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': 'no',
>>>>> 'MTU':
>>>>> >>> >>> > >> '9000',
>>>>> >>> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none',
>>>>> 'STP':
>>>>> >>> >>> > >> 'off',
>>>>> >>> >>> > >> 'DEVICE': 'Internal', 'TYPE': 'Bridge', 'ONBOOT': 'no'},
>>>>> >>> >>> > >> 'ipv6addrs':
>>>>> >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'], 'mtu': '9000',
>>>>> 'netmask': '',
>>>>> >>> >>> > >> 'stp':
>>>>> >>> >>> > >> 'off', 'ipv4addrs': [], 'ipv6gateway': '::', 'gateway':
>>>>> '',
>>>>> >>> >>> > >> 'opts':
>>>>> >>> >>> > >> {'topology_change_detected': '0',
>>>>> 'multicast_last_member_count':
>>>>> >>> >>> > >> '2',
>>>>> >>> >>> > >> 'hash_elasticity': '4',
>>>>> 'multicast_query_response_interval':
>>>>> >>> >>> > >> '999',
>>>>> >>> >>> > >> 'multicast_snooping': '1',
>>>>> 'multicast_startup_query_interval':
>>>>> >>> >>> > >> '3124',
>>>>> >>> >>> > >> 'hello_timer': '31', 'multicast_querier_interval':
>>>>> '25496',
>>>>> >>> >>> > >> 'max_age':
>>>>> >>> >>> > >> '1999', 'hash_max': '512', 'stp_state': '0', 'root_id':
>>>>> >>> >>> > >> '8000.001018cddaac', 'priority': '32768',
>>>>> >>> >>> > >> 'multicast_membership_interval':
>>>>> >>> >>> > >> '25996', 'root_path_cost': '0', 'root_port': '0',
>>>>> >>> >>> > >> 'multicast_querier':
>>>>> >>> >>> > >> '0',
>>>>> >>> >>> > >> 'multicast_startup_query_count': '2', 'hello_time': '199',
>>>>> >>> >>> > >> 'topology_change': '0', 'bridge_id': '8000.001018cddaac',
>>>>> >>> >>> > >> 'topology_change_timer': '0', 'ageing_time': '29995',
>>>>> >>> >>> > >> 'gc_timer':
>>>>> >>> >>> > >> '31',
>>>>> >>> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0',
>>>>> >>> >>> > >> 'multicast_query_interval': '12498',
>>>>> >>> >>> > >> 'multicast_last_member_interval':
>>>>> >>> >>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'},
>>>>> 'ports':
>>>>> >>> >>> > >> ['bond1.100']}, 'VMNetwork': {'addr': '', 'cfg':
>>>>> {'DEFROUTE':
>>>>> >>> >>> > >> 'no',
>>>>> >>> >>> > >> 'HOTPLUG': 'no', 'MTU': '1500', 'DELAY': '0',
>>>>> 'NM_CONTROLLED':
>>>>> >>> >>> > >> 'no',
>>>>> >>> >>> > >> 'BOOTPROTO': 'none', 'STP': 'off', 'DEVICE': 'VMNetwork',
>>>>> >>> >>> > >> 'TYPE':
>>>>> >>> >>> > >> 'Bridge',
>>>>> >>> >>> > >> 'ONBOOT': 'no'}, 'ipv6addrs':
>>>>> ['fe80::62eb:69ff:fe20:b46c/64'],
>>>>> >>> >>> > >> 'mtu':
>>>>> >>> >>> > >> '1500', 'netmask': '', 'stp': 'off', 'ipv4addrs': [],
>>>>> >>> >>> > >> 'ipv6gateway':
>>>>> >>> >>> > >> '::',
>>>>> >>> >>> > >> 'gateway': '', 'opts': {'topology_change_detected': '0',
>>>>> >>> >>> > >> 'multicast_last_member_count': '2', 'hash_elasticity':
>>>>> '4',
>>>>> >>> >>> > >> 'multicast_query_response_interval': '999',
>>>>> >>> >>> > >> 'multicast_snooping':
>>>>> >>> >>> > >> '1',
>>>>> >>> >>> > >> 'multicast_startup_query_interval': '3124', 'hello_timer':
>>>>> >>> >>> > >> '131',
>>>>> >>> >>> > >> 'multicast_querier_interval': '25496', 'max_age': '1999',
>>>>> >>> >>> > >> 'hash_max':
>>>>> >>> >>> > >> '512', 'stp_state': '0', 'root_id': '8000.60eb6920b46c',
>>>>> >>> >>> > >> 'priority':
>>>>> >>> >>> > >> '32768', 'multicast_membership_interval': '25996',
>>>>> >>> >>> > >> 'root_path_cost':
>>>>> >>> >>> > >> '0',
>>>>> >>> >>> > >> 'root_port': '0', 'multicast_querier': '0',
>>>>> >>> >>> > >> 'multicast_startup_query_count': '2', 'hello_time': '199',
>>>>> >>> >>> > >> 'topology_change': '0', 'bridge_id': '8000.60eb6920b46c',
>>>>> >>> >>> > >> 'topology_change_timer': '0', 'ageing_time': '29995',
>>>>> >>> >>> > >> 'gc_timer':
>>>>> >>> >>> > >> '31',
>>>>> >>> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0',
>>>>> >>> >>> > >> 'multicast_query_interval': '12498',
>>>>> >>> >>> > >> 'multicast_last_member_interval':
>>>>> >>> >>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'},
>>>>> 'ports':
>>>>> >>> >>> > >> ['bond0.36']}}, 'uuid':
>>>>> '44454C4C-4C00-1057-8053-B7C04F504E31',
>>>>> >>> >>> > >> 'lastClientIface': 'bond1', 'nics': {'eth3':
>>>>> {'permhwaddr':
>>>>> >>> >>> > >> '00:10:18:cd:da:ae', 'addr': '', 'cfg': {'SLAVE': 'yes',
>>>>> >>> >>> > >> 'NM_CONTROLLED':
>>>>> >>> >>> > >> 'no', 'MTU': '9000', 'HWADDR': '00:10:18:cd:da:ae',
>>>>> 'MASTER':
>>>>> >>> >>> > >> 'bond1',
>>>>> >>> >>> > >> 'DEVICE': 'eth3', 'ONBOOT': 'no'}, 'ipv6addrs': [], 'mtu':
>>>>> >>> >>> > >> '9000',
>>>>> >>> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr':
>>>>> '00:10:18:cd:da:ac',
>>>>> >>> >>> > >> 'speed':
>>>>> >>> >>> > >> 1000}, 'eth2': {'permhwaddr': '00:10:18:cd:da:ac',
>>>>> 'addr': '',
>>>>> >>> >>> > >> 'cfg':
>>>>> >>> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': '9000',
>>>>> 'HWADDR':
>>>>> >>> >>> > >> '00:10:18:cd:da:ac', 'MASTER': 'bond1', 'DEVICE': 'eth2',
>>>>> >>> >>> > >> 'ONBOOT':
>>>>> >>> >>> > >> 'no'},
>>>>> >>> >>> > >> 'ipv6addrs': [], 'mtu': '9000', 'netmask': '',
>>>>> 'ipv4addrs': [],
>>>>> >>> >>> > >> 'hwaddr':
>>>>> >>> >>> > >> '00:10:18:cd:da:ac', 'speed': 1000}, 'eth1':
>>>>> {'permhwaddr':
>>>>> >>> >>> > >> '60:eb:69:20:b4:6d', 'addr': '', 'cfg': {'SLAVE': 'yes',
>>>>> >>> >>> > >> 'NM_CONTROLLED':
>>>>> >>> >>> > >> 'no', 'MTU': '1500', 'HWADDR': '60:eb:69:20:b4:6d',
>>>>> 'MASTER':
>>>>> >>> >>> > >> 'bond0',
>>>>> >>> >>> > >> 'DEVICE': 'eth1', 'ONBOOT': 'yes'}, 'ipv6addrs': [],
>>>>> 'mtu':
>>>>> >>> >>> > >> '1500',
>>>>> >>> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr':
>>>>> '60:eb:69:20:b4:6c',
>>>>> >>> >>> > >> 'speed':
>>>>> >>> >>> > >> 1000}, 'eth0': {'permhwaddr': '60:eb:69:20:b4:6c',
>>>>> 'addr': '',
>>>>> >>> >>> > >> 'cfg':
>>>>> >>> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': '1500',
>>>>> 'HWADDR':
>>>>> >>> >>> > >> '60:eb:69:20:b4:6c', 'MASTER': 'bond0', 'DEVICE': 'eth0',
>>>>> >>> >>> > >> 'ONBOOT':
>>>>> >>> >>> > >> 'yes'},
>>>>> >>> >>> > >> 'ipv6addrs': [], 'mtu': '1500', 'netmask': '',
>>>>> 'ipv4addrs': [],
>>>>> >>> >>> > >> 'hwaddr':
>>>>> >>> >>> > >> '60:eb:69:20:b4:6c', 'speed': 1000}},
>>>>> 'software_revision': '1',
>>>>> >>> >>> > >> 'clusterLevels': ['3.0', '3.1', '3.2', '3.3', '3.4',
>>>>> '3.5'],
>>>>> >>> >>> > >> 'cpuFlags':
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> u'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270',
>>>>> >>> >>> > >> 'ISCSIInitiatorName':
>>>>> 'iqn.1994-05.com.redhat:32151ce183c8',
>>>>> >>> >>> > >> 'netConfigDirty': 'False', 'supportedENGINEs': ['3.0',
>>>>> '3.1',
>>>>> >>> >>> > >> '3.2',
>>>>> >>> >>> > >> '3.3',
>>>>> >>> >>> > >> '3.4', '3.5'], 'autoNumaBalancing': 2, 'reservedMem':
>>>>> '321',
>>>>> >>> >>> > >> 'bondings':
>>>>> >>> >>> > >> {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500',
>>>>> 'netmask': '',
>>>>> >>> >>> > >> 'slaves':
>>>>> >>> >>> > >> [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '',
>>>>> 'cfg':
>>>>> >>> >>> > >> {'HOTPLUG': 'no', 'MTU': '1500', 'NM_CONTROLLED': 'no',
>>>>> >>> >>> > >> 'BONDING_OPTS':
>>>>> >>> >>> > >> 'mode=4 miimon=100', 'DEVICE': 'bond0', 'ONBOOT': 'yes'},
>>>>> >>> >>> > >> 'ipv6addrs':
>>>>> >>> >>> > >> ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu': '1500',
>>>>> 'netmask': '',
>>>>> >>> >>> > >> 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c', 'slaves':
>>>>> >>> >>> > >> ['eth0',
>>>>> >>> >>> > >> 'eth1'],
>>>>> >>> >>> > >> 'opts': {'miimon': '100', 'mode': '4'}}, 'bond1': {'addr':
>>>>> >>> >>> > >> '10.10.10.6',
>>>>> >>> >>> > >> 'cfg': {'DEFROUTE': 'no', 'IPADDR': '10.10.10.6',
>>>>> 'HOTPLUG':
>>>>> >>> >>> > >> 'no',
>>>>> >>> >>> > >> 'MTU':
>>>>> >>> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0',
>>>>> >>> >>> > >> 'BOOTPROTO':
>>>>> >>> >>> > >> 'none', 'BONDING_OPTS': 'mode=4 miimon=100', 'DEVICE':
>>>>> 'bond1',
>>>>> >>> >>> > >> 'ONBOOT':
>>>>> >>> >>> > >> 'no'}, 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'],
>>>>> 'mtu':
>>>>> >>> >>> > >> '9000',
>>>>> >>> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': ['10.10.10.6/24'
>>>>> >>> >>> > >> <http://10.10.10.6/24%27>], 'hwaddr':
>>>>> '00:10:18:cd:da:ac',
>>>>> >>> >>> > >> 'slaves':
>>>>> >>> >>> > >> ['eth2', 'eth3'], 'opts': {'miimon': '100', 'mode': '4'}},
>>>>> >>> >>> > >> 'bond2':
>>>>> >>> >>> > >> {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '',
>>>>> 'slaves':
>>>>> >>> >>> > >> [],
>>>>> >>> >>> > >> 'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '',
>>>>> 'cfg': {},
>>>>> >>> >>> > >> 'mtu':
>>>>> >>> >>> > >> '1500', 'netmask': '', 'slaves': [], 'hwaddr':
>>>>> >>> >>> > >> '00:00:00:00:00:00'}},
>>>>> >>> >>> > >> 'software_version': '4.16', 'memSize': '24019',
>>>>> 'cpuSpeed':
>>>>> >>> >>> > >> '2667.000',
>>>>> >>> >>> > >> 'numaNodes': {u'1': {'totalMemory': '12288', 'cpus': [6,
>>>>> 7, 8,
>>>>> >>> >>> > >> 9,
>>>>> >>> >>> > >> 10, 11,
>>>>> >>> >>> > >> 18, 19, 20, 21, 22, 23]}, u'0': {'totalMemory': '12278',
>>>>> 'cpus':
>>>>> >>> >>> > >> [0,
>>>>> >>> >>> > >> 1, 2,
>>>>> >>> >>> > >> 3, 4, 5, 12, 13, 14, 15, 16, 17]}}, 'version_name': 'Snow
>>>>> Man',
>>>>> >>> >>> > >> 'vlans':
>>>>> >>> >>> > >> {'bond0.10': {'iface': 'bond0', 'addr': '43.25.17.16',
>>>>> 'cfg':
>>>>> >>> >>> > >> {'DEFROUTE':
>>>>> >>> >>> > >> 'yes', 'VLAN': 'yes', 'IPADDR': '43.25.17.16', 'HOTPLUG':
>>>>> 'no',
>>>>> >>> >>> > >> 'GATEWAY':
>>>>> >>> >>> > >> '43.25.17.1', 'NM_CONTROLLED': 'no', 'NETMASK':
>>>>> '255.255.255.0',
>>>>> >>> >>> > >> 'BOOTPROTO': 'none', 'DEVICE': 'bond0.10', 'MTU': '1500',
>>>>> >>> >>> > >> 'ONBOOT':
>>>>> >>> >>> > >> 'yes'},
>>>>> >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid':
>>>>> 10,
>>>>> >>> >>> > >> 'mtu':
>>>>> >>> >>> > >> '1500',
>>>>> >>> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': ['43.25.17.16/24
>>>>> ']
>>>>> >>> >>> > >> <http://43.25.17.16/24%27%5D>}, 'bond0.36': {'iface':
>>>>> 'bond0',
>>>>> >>> >>> > >> 'addr':
>>>>> >>> >>> > >> '', 'cfg': {'BRIDGE': 'VMNetwork', 'VLAN': 'yes',
>>>>> 'HOTPLUG':
>>>>> >>> >>> > >> 'no',
>>>>> >>> >>> > >> 'MTU':
>>>>> >>> >>> > >> '1500', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond0.36',
>>>>> 'ONBOOT':
>>>>> >>> >>> > >> 'no'},
>>>>> >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid':
>>>>> 36,
>>>>> >>> >>> > >> 'mtu':
>>>>> >>> >>> > >> '1500',
>>>>> >>> >>> > >> 'netmask': '', 'ipv4addrs': []}, 'bond1.100': {'iface':
>>>>> 'bond1',
>>>>> >>> >>> > >> 'addr':
>>>>> >>> >>> > >> '', 'cfg': {'BRIDGE': 'Internal', 'VLAN': 'yes',
>>>>> 'HOTPLUG':
>>>>> >>> >>> > >> 'no',
>>>>> >>> >>> > >> 'MTU':
>>>>> >>> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond1.100',
>>>>> 'ONBOOT':
>>>>> >>> >>> > >> 'no'},
>>>>> >>> >>> > >> 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], 'vlanid':
>>>>> 100,
>>>>> >>> >>> > >> 'mtu':
>>>>> >>> >>> > >> '9000',
>>>>> >>> >>> > >> 'netmask': '', 'ipv4addrs': []}}, 'cpuCores': '12',
>>>>> >>> >>> > >> 'kvmEnabled':
>>>>> >>> >>> > >> 'true',
>>>>> >>> >>> > >> 'guestOverhead': '65', 'cpuThreads': '24',
>>>>> 'emulatedMachines':
>>>>> >>> >>> > >> [u'rhel6.5.0', u'pc', u'rhel6.4.0', u'rhel6.3.0',
>>>>> u'rhel6.2.0',
>>>>> >>> >>> > >> u'rhel6.1.0', u'rhel6.0.0', u'rhel5.5.0', u'rhel5.4.4',
>>>>> >>> >>> > >> u'rhel5.4.0'],
>>>>> >>> >>> > >> 'operatingSystem': {'release': '5.el6.centos.11.1',
>>>>> 'version':
>>>>> >>> >>> > >> '6',
>>>>> >>> >>> > >> 'name':
>>>>> >>> >>> > >> 'RHEL'}, 'lastClient': '10.10.10.2'}}
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,620::BindingXMLRPC::1132::vds::(wrapper) client
>>>>> >>> >>> > >> [10.10.10.2]::call
>>>>> >>> >>> > >> getHardwareInfo with () {}
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,621::BindingXMLRPC::1139::vds::(wrapper) return
>>>>> >>> >>> > >> getHardwareInfo
>>>>> >>> >>> > >> with {'status': {'message': 'Done', 'code': 0}, 'info':
>>>>> >>> >>> > >> {'systemProductName': 'CS24-TY', 'systemSerialNumber':
>>>>> >>> >>> > >> '7LWSPN1',
>>>>> >>> >>> > >> 'systemFamily': 'Server', 'systemVersion': 'A00',
>>>>> 'systemUUID':
>>>>> >>> >>> > >> '44454c4c-4c00-1057-8053-b7c04f504e31',
>>>>> 'systemManufacturer':
>>>>> >>> >>> > >> 'Dell'}}
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >> 21:41:41,733::BindingXMLRPC::1132::vds::(wrapper) client
>>>>> >>> >>> > >> [10.10.10.2]::call
>>>>> >>> >>> > >> hostsList with () {} flowID [222e8036]
>>>>> >>> >>> > >> Thread-13::ERROR::2014-11-24
>>>>> >>> >>> > >> 21:41:44,753::BindingXMLRPC::1148::vds::(wrapper) vdsm
>>>>> exception
>>>>> >>> >>> > >> occured
>>>>> >>> >>> > >> Traceback (most recent call last):
>>>>> >>> >>> > >> File "/usr/share/vdsm/rpc/BindingXMLRPC.py", line 1135,
>>>>> in
>>>>> >>> >>> > >> wrapper
>>>>> >>> >>> > >> res = f(*args, **kwargs)
>>>>> >>> >>> > >> File "/usr/share/vdsm/gluster/api.py", line 54, in
>>>>> wrapper
>>>>> >>> >>> > >> rv = func(*args, **kwargs)
>>>>> >>> >>> > >> File "/usr/share/vdsm/gluster/api.py", line 251, in
>>>>> hostsList
>>>>> >>> >>> > >> return {'hosts': self.svdsmProxy.glusterPeerStatus()}
>>>>> >>> >>> > >> File "/usr/share/vdsm/supervdsm.py", line 50, in
>>>>> __call__
>>>>> >>> >>> > >> return callMethod()
>>>>> >>> >>> > >> File "/usr/share/vdsm/supervdsm.py", line 48, in
>>>>> <lambda>
>>>>> >>> >>> > >> **kwargs)
>>>>> >>> >>> > >> File "<string>", line 2, in glusterPeerStatus
>>>>> >>> >>> > >> File
>>>>> "/usr/lib64/python2.6/multiprocessing/managers.py", line
>>>>> >>> >>> > >> 740,
>>>>> >>> >>> > >> in
>>>>> >>> >>> > >> _callmethod
>>>>> >>> >>> > >> raise convert_to_error(kind, result)
>>>>> >>> >>> > >> GlusterCmdExecFailedException: Command execution failed
>>>>> >>> >>> > >> error: Connection failed. Please check if gluster daemon
>>>>> is
>>>>> >>> >>> > >> operational.
>>>>> >>> >>> > >> return code: 1
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> 21:41:50,949::task::595::Storage.TaskManager.Task::(_updateState)
>>>>> >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from
>>>>> state
>>>>> >>> >>> > >> init
>>>>> >>> >>> > >> ->
>>>>> >>> >>> > >> state preparing
>>>>> >>> >>> > >> Thread-13::INFO::2014-11-24
>>>>> >>> >>> > >> 21:41:50,950::logUtils::44::dispatcher::(wrapper) Run and
>>>>> >>> >>> > >> protect:
>>>>> >>> >>> > >> repoStats(options=None)
>>>>> >>> >>> > >> Thread-13::INFO::2014-11-24
>>>>> >>> >>> > >> 21:41:50,950::logUtils::47::dispatcher::(wrapper) Run and
>>>>> >>> >>> > >> protect:
>>>>> >>> >>> > >> repoStats, Return response: {}
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >>
>>>>> 21:41:50,950::task::1191::Storage.TaskManager.Task::(prepare)
>>>>> >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::finished: {}
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> 21:41:50,950::task::595::Storage.TaskManager.Task::(_updateState)
>>>>> >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from
>>>>> state
>>>>> >>> >>> > >> preparing
>>>>> >>> >>> > >> ->
>>>>> >>> >>> > >> state finished
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> 21:41:50,951::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)
>>>>> >>> >>> > >> Owner.releaseAll requests {} resources {}
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> 21:41:50,951::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
>>>>> >>> >>> > >> Owner.cancelAll requests {}
>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>>> >>> >>> > >>
>>>>> 21:41:50,951::task::993::Storage.TaskManager.Task::(_decref)
>>>>> >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::ref 0
>>>>> aborting
>>>>> >>> >>> > >> False
>>>>> >>> >>> > >> -------------------------------
>>>>> >>> >>> > >>
>>>>> >>> >>> > >> [root at compute4 ~]# service glusterd status
>>>>> >>> >>> > >> glusterd is stopped
>>>>> >>> >>> > >> [root at compute4 ~]# chkconfig --list | grep glusterd
>>>>> >>> >>> > >> glusterd 0:off 1:off 2:on 3:on 4:on
>>>>> 5:on
>>>>> >>> >>> > >> 6:off
>>>>> >>> >>> > >> [root at compute4 ~]#
>>>>> >>> >>> > >>
>>>>> >>> >>> > >> Thanks,
>>>>> >>> >>> > >> Punit
>>>>> >>> >>> > >>
>>>>> >>> >>> > >> On Mon, Nov 24, 2014 at 6:36 PM, Kanagaraj <
>>>>> kmayilsa at redhat.com>
>>>>> >>> >>> > >> wrote:
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>> Can you send the corresponding error in vdsm.log from
>>>>> the
>>>>> >>> >>> > >>> host?
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>> Also check if glusterd service is running.
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>> Thanks,
>>>>> >>> >>> > >>> Kanagaraj
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>> On 11/24/2014 03:39 PM, Punit Dambiwal wrote:
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>> Hi,
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>> After reboot my Hypervisior host can not activate again
>>>>> in the
>>>>> >>> >>> > >>> cluster
>>>>> >>> >>> > >>> and failed with the following error :-
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>> Gluster command [<UNKNOWN>] failed on server...
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>> Engine logs :-
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>> 2014-11-24 18:05:28,397 INFO
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-64) START,
>>>>> >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId
>>>>> =
>>>>> >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 5f251c90
>>>>> >>> >>> > >>> 2014-11-24 18:05:30,609 INFO
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-64) FINISH,
>>>>> >>> >>> > >>> GlusterVolumesListVDSCommand,
>>>>> >>> >>> > >>> return:
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity at d95203e0
>>>>> },
>>>>> >>> >>> > >>> log id: 5f251c90
>>>>> >>> >>> > >>> 2014-11-24 18:05:33,768 INFO
>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>>>>> >>> >>> > >>> (ajp--127.0.0.1-8702-8)
>>>>> >>> >>> > >>> [287d570d] Lock Acquired to object EngineLock
>>>>> [exclusiveLocks=
>>>>> >>> >>> > >>> key:
>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a value: VDS
>>>>> >>> >>> > >>> , sharedLocks= ]
>>>>> >>> >>> > >>> 2014-11-24 18:05:33,795 INFO
>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Running
>>>>> command:
>>>>> >>> >>> > >>> ActivateVdsCommand internal: false. Entities affected :
>>>>> ID:
>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDSAction
>>>>> group
>>>>> >>> >>> > >>> MANIPULATE_HOST
>>>>> >>> >>> > >>> with role type ADMIN
>>>>> >>> >>> > >>> 2014-11-24 18:05:33,796 INFO
>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Before
>>>>> acquiring
>>>>> >>> >>> > >>> lock in
>>>>> >>> >>> > >>> order to prevent monitoring for host Compute5 from
>>>>> data-center
>>>>> >>> >>> > >>> SV_WTC
>>>>> >>> >>> > >>> 2014-11-24 18:05:33,797 INFO
>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Lock
>>>>> acquired,
>>>>> >>> >>> > >>> from
>>>>> >>> >>> > >>> now a
>>>>> >>> >>> > >>> monitoring of host will be skipped for host Compute5 from
>>>>> >>> >>> > >>> data-center
>>>>> >>> >>> > >>> SV_WTC
>>>>> >>> >>> > >>> 2014-11-24 18:05:33,817 INFO
>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] START,
>>>>> >>> >>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId =
>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, status=Unassigned,
>>>>> >>> >>> > >>> nonOperationalReason=NONE, stopSpmFailureLogged=false),
>>>>> log id:
>>>>> >>> >>> > >>> 1cbc7311
>>>>> >>> >>> > >>> 2014-11-24 18:05:33,820 INFO
>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] FINISH,
>>>>> >>> >>> > >>> SetVdsStatusVDSCommand, log id: 1cbc7311
>>>>> >>> >>> > >>> 2014-11-24 18:05:34,086 INFO
>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Activate finished.
>>>>> Lock
>>>>> >>> >>> > >>> released.
>>>>> >>> >>> > >>> Monitoring can run now for host Compute5 from data-center
>>>>> >>> >>> > >>> SV_WTC
>>>>> >>> >>> > >>> 2014-11-24 18:05:34,088 INFO
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Correlation ID:
>>>>> 287d570d,
>>>>> >>> >>> > >>> Job
>>>>> >>> >>> > >>> ID:
>>>>> >>> >>> > >>> 5ef8e4d6-b2bc-469e-8e81-7ef74b2a001a, Call Stack: null,
>>>>> Custom
>>>>> >>> >>> > >>> Event ID:
>>>>> >>> >>> > >>> -1, Message: Host Compute5 was activated by admin.
>>>>> >>> >>> > >>> 2014-11-24 18:05:34,090 INFO
>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Lock freed to object
>>>>> >>> >>> > >>> EngineLock
>>>>> >>> >>> > >>> [exclusiveLocks= key:
>>>>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a
>>>>> >>> >>> > >>> value:
>>>>> >>> >>> > >>> VDS
>>>>> >>> >>> > >>> , sharedLocks= ]
>>>>> >>> >>> > >>> 2014-11-24 18:05:35,792 INFO
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] START,
>>>>> >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId
>>>>> =
>>>>> >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 48a0c832
>>>>> >>> >>> > >>> 2014-11-24 18:05:37,064 INFO
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) START,
>>>>> >>> >>> > >>> GetHardwareInfoVDSCommand(HostName = Compute5, HostId =
>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a,
>>>>> >>> >>> > >>>
>>>>> vds=Host[Compute5,0bf6b00f-7947-4411-b55a-cc5eea2b381a]), log
>>>>> >>> >>> > >>> id:
>>>>> >>> >>> > >>> 6d560cc2
>>>>> >>> >>> > >>> 2014-11-24 18:05:37,074 INFO
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) FINISH,
>>>>> >>> >>> > >>> GetHardwareInfoVDSCommand, log
>>>>> >>> >>> > >>> id: 6d560cc2
>>>>> >>> >>> > >>> 2014-11-24 18:05:37,093 WARN
>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.VdsManager]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) Host Compute5 is
>>>>> running
>>>>> >>> >>> > >>> with
>>>>> >>> >>> > >>> disabled
>>>>> >>> >>> > >>> SELinux.
>>>>> >>> >>> > >>> 2014-11-24 18:05:37,127 INFO
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> [org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] Running
>>>>> command:
>>>>> >>> >>> > >>> HandleVdsCpuFlagsOrClusterChangedCommand internal: true.
>>>>> >>> >>> > >>> Entities
>>>>> >>> >>> > >>> affected
>>>>> >>> >>> > >>> : ID: 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS
>>>>> >>> >>> > >>> 2014-11-24 18:05:37,147 INFO
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] START,
>>>>> >>> >>> > >>> GlusterServersListVDSCommand(HostName = Compute5, HostId
>>>>> =
>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a), log id: 4faed87
>>>>> >>> >>> > >>> 2014-11-24 18:05:37,164 INFO
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] FINISH,
>>>>> >>> >>> > >>> GlusterServersListVDSCommand, log id: 4faed87
>>>>> >>> >>> > >>> 2014-11-24 18:05:37,189 INFO
>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Running
>>>>> command:
>>>>> >>> >>> > >>> SetNonOperationalVdsCommand internal: true. Entities
>>>>> affected :
>>>>> >>> >>> > >>> ID:
>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS
>>>>> >>> >>> > >>> 2014-11-24 18:05:37,206 INFO
>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] START,
>>>>> >>> >>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId =
>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a,
>>>>> status=NonOperational,
>>>>> >>> >>> > >>> nonOperationalReason=GLUSTER_COMMAND_FAILED,
>>>>> >>> >>> > >>> stopSpmFailureLogged=false),
>>>>> >>> >>> > >>> log id: fed5617
>>>>> >>> >>> > >>> 2014-11-24 18:05:37,209 INFO
>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] FINISH,
>>>>> >>> >>> > >>> SetVdsStatusVDSCommand, log id: fed5617
>>>>> >>> >>> > >>> 2014-11-24 18:05:37,223 ERROR
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5]
>>>>> Correlation ID:
>>>>> >>> >>> > >>> 4a84c4e5,
>>>>> >>> >>> > >>> Job
>>>>> >>> >>> > >>> ID: 4bfd4a6d-c3ef-468f-a40e-a3a6ca13011b, Call Stack:
>>>>> null,
>>>>> >>> >>> > >>> Custom
>>>>> >>> >>> > >>> Event
>>>>> >>> >>> > >>> ID: -1, Message: Gluster command [<UNKNOWN>] failed on
>>>>> server
>>>>> >>> >>> > >>> Compute5.
>>>>> >>> >>> > >>> 2014-11-24 18:05:37,243 INFO
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5]
>>>>> Correlation ID:
>>>>> >>> >>> > >>> null,
>>>>> >>> >>> > >>> Call
>>>>> >>> >>> > >>> Stack: null, Custom Event ID: -1, Message: Status of host
>>>>> >>> >>> > >>> Compute5
>>>>> >>> >>> > >>> was
>>>>> >>> >>> > >>> set
>>>>> >>> >>> > >>> to NonOperational.
>>>>> >>> >>> > >>> 2014-11-24 18:05:37,272 INFO
>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.HandleVdsVersionCommand]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Running
>>>>> command:
>>>>> >>> >>> > >>> HandleVdsVersionCommand internal: true. Entities
>>>>> affected :
>>>>> >>> >>> > >>> ID:
>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS
>>>>> >>> >>> > >>> 2014-11-24 18:05:37,274 INFO
>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Host
>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a : Compute5 is
>>>>> already in
>>>>> >>> >>> > >>> NonOperational status for reason GLUSTER_COMMAND_FAILED.
>>>>> >>> >>> > >>> SetNonOperationalVds command is skipped.
>>>>> >>> >>> > >>> 2014-11-24 18:05:38,065 INFO
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] FINISH,
>>>>> >>> >>> > >>> GlusterVolumesListVDSCommand, return:
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity at 4e72a1b1
>>>>> },
>>>>> >>> >>> > >>> log id: 48a0c832
>>>>> >>> >>> > >>> 2014-11-24 18:05:43,243 INFO
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-35) START,
>>>>> >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId
>>>>> =
>>>>> >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 3ce13ebc
>>>>> >>> >>> > >>> ^C
>>>>> >>> >>> > >>> [root at ccr01 ~]#
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>> Thanks,
>>>>> >>> >>> > >>> Punit
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>> _______________________________________________
>>>>> >>> >>> > >>> Users mailing
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>> listUsers at ovirt.orghttp://
>>>>> lists.ovirt.org/mailman/listinfo/users
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>>
>>>>> >>> >>> > >>
>>>>> >>> >>> > >>
>>>>> >>> >>> > >
>>>>> >>> >>> > >
>>>>> >>> >>> >
>>>>> >>> >>
>>>>> >>> >>
>>>>> >>> >
>>>>> >>> >
>>>>> >>> > _______________________________________________
>>>>> >>> > Gluster-users mailing list
>>>>> >>> > Gluster-users at gluster.org
>>>>> >>> > http://supercolony.gluster.org/mailman/listinfo/gluster-users
>>>>> >>
>>>>> >>
>>>>> >
>>>>>
>>>>
>>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20141203/e063f13a/attachment-0001.html>
More information about the Users
mailing list