[ovirt-users] [Gluster-users] Gluster command [<UNKNOWN>] failed on server...
Punit Dambiwal
hypunit at gmail.com
Fri Dec 12 03:34:06 UTC 2014
Hi Alberto,
I tried it but still the same error...
On Thu, Dec 11, 2014 at 9:07 PM, Alberto Larraz <
alarraz at escoladeltreball.org> wrote:
> If you use network service, and the line After=network.target
> rpcbind.service is in the glusterd.service glusterd have to wait to service
> network start... You can try this for debug de problem with the network...
>
> if your ip address for gluster is for example: 10.88.0.1, you can grep
> "10.88" in the line ExecStart
>
> You can create a new service (type oneshot) in systemd, for example:
> /etc/systemd/system/address_up.service
>
>
> [Unit]
> Description=address_up
> After=network-online.target
>
> [Service]
>
> Type=oneshot
> ExecStart=/bin/sh -c 'until ip a s bond0 | grep -q 10.88; do usleep
> 100000; done'
>
> ## debug option
> ExecStart=/bin/sh -c 'ip a s > /var/tmp/ip_information'
>
>
> RemainAfterExit=yes
>
> [Install]
> WantedBy=multi-user.target
>
>
> And then you can modify /usr/lib/systemd/system/glusterd.service . Add the
> service in "After" line:
>
> After=network.target rpcbind.service address_up.service
>
>
>
> Good luck:
>
> Alberto
>
>
> 2014-12-10 3:21 GMT+01:00 Punit Dambiwal <hypunit at gmail.com>:
>>
>> Hi Albereto,
>>
>> I am using the bonding eth2+eth3=bond0 for gluster communication....and i
>> am not using the NetworkManager.service....as all the interface configured
>> by Ovirt itself.....please let me know how i can achieve this...??
>>
>> [root at cpu04 ~]# systemctl list-unit-files | grep Network
>> NetworkManager-dispatcher.service disabled
>> NetworkManager-wait-online.service disabled
>> NetworkManager.service disabled
>> [root at cpu04 ~]# cat /usr/lib/systemd/system/glusterd.service
>> [Unit]
>> Description=GlusterFS, a clustered file-system server
>> After=network.target rpcbind.service
>> Wants=network-online.target
>>
>> [Service]
>> Type=forking
>> PIDFile=/var/run/glusterd.pid
>> LimitNOFILE=65536
>> ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid
>> KillMode=process
>>
>> [Install]
>> WantedBy=multi-user.target
>> [root at cpu04 ~]#
>>
>> Thanks,
>> Punit
>>
>> On Wed, Dec 10, 2014 at 6:21 AM, Alberto Larraz <
>> alarraz at escoladeltreball.org> wrote:
>>
>>> I post a bug in centos about a problem with
>>> NetworkManager-wait-online.service, this service is executed before
>>> network-online.target
>>>
>>> http://bugs.centos.org/view.php?id=7825
>>>
>>> I had a problem with mount drbd in a centos7 at boot time. I think it
>>> could be similar to the problem to mount gluster in boot time in centos7.
>>>
>>> I modified the service adding one line that wait to NetworkManager to
>>> set up the ip address in the interface that is used to connect de drbd, the
>>> the ip address in eth0 is 10.88.0.1 and the line I added is:
>>>
>>> ExecStart=/bin/sh -c 'until ip a s eth0 | grep -q 10.88; do usleep
>>> 100000; done'
>>>
>>>
>>>
>>>
>>> # cat /usr/lib/systemd/system/NetworkManager-wait-online.service
>>>
>>> [Unit]
>>> Description=Network Manager Wait Online
>>> Requisite=NetworkManager.service
>>> After=NetworkManager.service
>>> Wants=network.target
>>> Before=network.target network-online.target
>>>
>>> [Service]
>>> Type=oneshot
>>> ExecStart=/usr/bin/nm-online -q --timeout=30
>>> ExecStart=/bin/sh -c 'until ip a s eth0 | grep -q 10.88; do usleep
>>> 100000; done'
>>>
>>>
>>>
>>> Alberto
>>>
>>> 2014-12-05 14:50 GMT+01:00 Kaushal M <kshlmster at gmail.com>:
>>>
>>>> Can you replace 'Before=network-online.target' with
>>>> 'Wants=network-online.target' and try the boot again? This should
>>>> force the network to be online before starting GlusterD.
>>>>
>>>> If even that fails, you could try adding an entry into /etc/hosts with
>>>> the hostname of the system. This should prevent any more failures.
>>>>
>>>> I still don't believe it's a problem with Gluster. Gluster uses apis
>>>> provided by the system to perform name resolution. These definitely
>>>> work correctly because you can start GlusterD later. Since the
>>>> resolution failure only happens during boot, it points to system or
>>>> network setup issues during boot. To me it seems like the network
>>>> isn't completely setup at that point of time.
>>>>
>>>> ~kaushal
>>>>
>>>> On Fri, Dec 5, 2014 at 12:47 PM, Punit Dambiwal <hypunit at gmail.com>
>>>> wrote:
>>>> > Hi Kaushal,
>>>> >
>>>> > It seems it's bug in glusterfs 3.6....even i manage my systemd to
>>>> start the
>>>> > network service before glusterd...but it's still fail...
>>>> >
>>>> > ---------------
>>>> > [Unit]
>>>> > Description=GlusterFS, a clustered file-system server
>>>> > After=network.target rpcbind.service
>>>> > Before=network-online.target
>>>> >
>>>> > [Service]
>>>> > Type=forking
>>>> > PIDFile=/var/run/glusterd.pid
>>>> > LimitNOFILE=65536
>>>> > ExecStartPre=/etc/rc.d/init.d/network start
>>>> > ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid
>>>> > KillMode=process
>>>> >
>>>> > [Install]
>>>> > WantedBy=multi-user.target
>>>> > ----------------
>>>> >
>>>> > Thanks,
>>>> > Punit
>>>> >
>>>> > On Wed, Dec 3, 2014 at 8:56 PM, Kaushal M <kshlmster at gmail.com>
>>>> wrote:
>>>> >>
>>>> >> I just remembered this.
>>>> >>
>>>> >> There was another user having a similar issue of GlusterD failing to
>>>> >> start on the mailing list a while back. The cause of his problem was
>>>> >> the way his network was brought up.
>>>> >> IIRC, he was using a static network configuration. The problem
>>>> >> vanished when he began using dhcp. Or it might have been he was using
>>>> >> dhcp.service and it got solved after switching to NetworkManager.
>>>> >>
>>>> >> This could be one more thing you could look at.
>>>> >>
>>>> >> I'll try to find the mail thread to see if it was the same problem
>>>> as you.
>>>> >>
>>>> >> ~kaushal
>>>> >>
>>>> >> On Wed, Dec 3, 2014 at 6:22 PM, Kaushal M <kshlmster at gmail.com>
>>>> wrote:
>>>> >> > I don't know much about how the network target is brought up in
>>>> >> > CentOS7, but I'll try as much as I can.
>>>> >> >
>>>> >> > It seems to me that, after the network has been brought up and by
>>>> the
>>>> >> > time GlusterD is started,
>>>> >> > a. The machine hasn't yet recieved it's hostname, or
>>>> >> > b. It hasn't yet registered with the name server.
>>>> >> >
>>>> >> > This is causing name resolution failures.
>>>> >> >
>>>> >> > I don't know if the network target could come up without the
>>>> machine
>>>> >> > getting its hostname, so I'm pretty sure it's not a.
>>>> >> >
>>>> >> > So it seems to be b. But these kind of signing in happens only in
>>>> DDNS
>>>> >> > systems, which doesn't seem to be the case for you.
>>>> >> >
>>>> >> > Both of these reasons might be wrong (most likely wrong). You'd do
>>>> >> > good if you could ask for help from someone with more experience in
>>>> >> > systemd + networking.
>>>> >> >
>>>> >> > ~kaushal
>>>> >> >
>>>> >> > On Wed, Dec 3, 2014 at 10:54 AM, Punit Dambiwal <hypunit at gmail.com
>>>> >
>>>> >> > wrote:
>>>> >> >> Hi Kaushal,
>>>> >> >>
>>>> >> >> This is the host...which i rebooted...would you mind to let me
>>>> know how
>>>> >> >> i
>>>> >> >> can make the glusterd sevice come up after network...i am using
>>>> >> >> centos7...if
>>>> >> >> network is the issue...
>>>> >> >>
>>>> >> >> On Wed, Dec 3, 2014 at 11:54 AM, Kaushal M <kshlmster at gmail.com>
>>>> wrote:
>>>> >> >>>
>>>> >> >>> This peer cannot be identified.
>>>> >> >>>
>>>> >> >>> " [2014-12-03 02:29:25.998153] D
>>>> >> >>> [glusterd-peer-utils.c:121:glusterd_peerinfo_find_by_hostname]
>>>> >> >>> 0-management:
>>>> >> >>> Unable to find friend: cpu05.zne01.hkg1.ovt.36stack.com"
>>>> >> >>>
>>>> >> >>> I don't know why this address is not being resolved during boot
>>>> time.
>>>> >> >>> If
>>>> >> >>> this is a valid peer, the the only reason I can think of this
>>>> that the
>>>> >> >>> network is not up.
>>>> >> >>>
>>>> >> >>> If you had previously detached the peer forcefully, the that
>>>> could
>>>> >> >>> have
>>>> >> >>> left stale entries in some volumes. In this case as well,
>>>> GlusterD
>>>> >> >>> will fail
>>>> >> >>> to identify the peer.
>>>> >> >>>
>>>> >> >>> Do either of these reasons seem a possibility to you?
>>>> >> >>>
>>>> >> >>> On Dec 3, 2014 8:07 AM, "Punit Dambiwal" <hypunit at gmail.com>
>>>> wrote:
>>>> >> >>>>
>>>> >> >>>> Hi Kaushal,
>>>> >> >>>>
>>>> >> >>>> Please find the logs here :- http://ur1.ca/iyoe5 and
>>>> >> >>>> http://ur1.ca/iyoed
>>>> >> >>>>
>>>> >> >>>> On Tue, Dec 2, 2014 at 10:43 PM, Kaushal M <kshlmster at gmail.com
>>>> >
>>>> >> >>>> wrote:
>>>> >> >>>>>
>>>> >> >>>>> Hey Punit,
>>>> >> >>>>> In the logs you've provided, GlusterD appears to be running
>>>> >> >>>>> correctly.
>>>> >> >>>>> Could you provide the logs for the time period when GlusterD
>>>> >> >>>>> attempts to
>>>> >> >>>>> start but fails.
>>>> >> >>>>>
>>>> >> >>>>> ~kaushal
>>>> >> >>>>>
>>>> >> >>>>> On Dec 2, 2014 8:03 PM, "Punit Dambiwal" <hypunit at gmail.com>
>>>> wrote:
>>>> >> >>>>>>
>>>> >> >>>>>> Hi Kaushal,
>>>> >> >>>>>>
>>>> >> >>>>>> Please find the logs here :- http://ur1.ca/iyhs5 and
>>>> >> >>>>>> http://ur1.ca/iyhue
>>>> >> >>>>>>
>>>> >> >>>>>> Thanks,
>>>> >> >>>>>> punit
>>>> >> >>>>>>
>>>> >> >>>>>>
>>>> >> >>>>>> On Tue, Dec 2, 2014 at 12:00 PM, Kaushal M <
>>>> kshlmster at gmail.com>
>>>> >> >>>>>> wrote:
>>>> >> >>>>>>>
>>>> >> >>>>>>> Hey Punit,
>>>> >> >>>>>>> Could you start Glusterd in debug mode and provide the logs
>>>> here?
>>>> >> >>>>>>> To start it in debug mode, append '-LDEBUG' to the ExecStart
>>>> line
>>>> >> >>>>>>> in
>>>> >> >>>>>>> the service file.
>>>> >> >>>>>>>
>>>> >> >>>>>>> ~kaushal
>>>> >> >>>>>>>
>>>> >> >>>>>>> On Mon, Dec 1, 2014 at 9:05 AM, Punit Dambiwal <
>>>> hypunit at gmail.com>
>>>> >> >>>>>>> wrote:
>>>> >> >>>>>>> > Hi,
>>>> >> >>>>>>> >
>>>> >> >>>>>>> > Can Any body help me on this ??
>>>> >> >>>>>>> >
>>>> >> >>>>>>> > On Thu, Nov 27, 2014 at 9:29 AM, Punit Dambiwal
>>>> >> >>>>>>> > <hypunit at gmail.com>
>>>> >> >>>>>>> > wrote:
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> Hi Kaushal,
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> Thanks for the detailed reply....let me explain my setup
>>>> first
>>>> >> >>>>>>> >> :-
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> 1. Ovirt Engine
>>>> >> >>>>>>> >> 2. 4* host as well as storage machine (Host and gluster
>>>> >> >>>>>>> >> combined)
>>>> >> >>>>>>> >> 3. Every host has 24 bricks...
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> Now whenever the host machine reboot...it can come up but
>>>> can
>>>> >> >>>>>>> >> not
>>>> >> >>>>>>> >> join the
>>>> >> >>>>>>> >> cluster again and through the following error "Gluster
>>>> command
>>>> >> >>>>>>> >> [<UNKNOWN>]
>>>> >> >>>>>>> >> failed on server.."
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> Please check my comment in line :-
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> 1. Use the same string for doing the peer probe and for
>>>> the
>>>> >> >>>>>>> >> brick
>>>> >> >>>>>>> >> address
>>>> >> >>>>>>> >> during volume create/add-brick. Ideally, we suggest you
>>>> use
>>>> >> >>>>>>> >> properly
>>>> >> >>>>>>> >> resolvable FQDNs everywhere. If that is not possible,
>>>> then use
>>>> >> >>>>>>> >> only
>>>> >> >>>>>>> >> IP
>>>> >> >>>>>>> >> addresses. Try to avoid short names.
>>>> >> >>>>>>> >> ---------------
>>>> >> >>>>>>> >> [root at cpu05 ~]# gluster peer status
>>>> >> >>>>>>> >> Number of Peers: 3
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> Hostname: cpu03.stack.com
>>>> >> >>>>>>> >> Uuid: 5729b8c4-e80d-4353-b456-6f467bddbdfb
>>>> >> >>>>>>> >> State: Peer in Cluster (Connected)
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> Hostname: cpu04.stack.com
>>>> >> >>>>>>> >> Uuid: d272b790-c4b2-4bed-ba68-793656e6d7b0
>>>> >> >>>>>>> >> State: Peer in Cluster (Connected)
>>>> >> >>>>>>> >> Other names:
>>>> >> >>>>>>> >> 10.10.0.8
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> Hostname: cpu02.stack.com
>>>> >> >>>>>>> >> Uuid: 8d8a7041-950e-40d0-85f9-58d14340ca25
>>>> >> >>>>>>> >> State: Peer in Cluster (Connected)
>>>> >> >>>>>>> >> [root at cpu05 ~]#
>>>> >> >>>>>>> >> ----------------
>>>> >> >>>>>>> >> 2. During boot up, make sure to launch glusterd only
>>>> after the
>>>> >> >>>>>>> >> network is
>>>> >> >>>>>>> >> up. This will allow the new peer identification mechanism
>>>> to do
>>>> >> >>>>>>> >> its
>>>> >> >>>>>>> >> job correctly.
>>>> >> >>>>>>> >> >> I think the service itself doing the same job....
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> [root at cpu05 ~]# cat
>>>> /usr/lib/systemd/system/glusterd.service
>>>> >> >>>>>>> >> [Unit]
>>>> >> >>>>>>> >> Description=GlusterFS, a clustered file-system server
>>>> >> >>>>>>> >> After=network.target rpcbind.service
>>>> >> >>>>>>> >> Before=network-online.target
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> [Service]
>>>> >> >>>>>>> >> Type=forking
>>>> >> >>>>>>> >> PIDFile=/var/run/glusterd.pid
>>>> >> >>>>>>> >> LimitNOFILE=65536
>>>> >> >>>>>>> >> ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid
>>>> >> >>>>>>> >> KillMode=process
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> [Install]
>>>> >> >>>>>>> >> WantedBy=multi-user.target
>>>> >> >>>>>>> >> [root at cpu05 ~]#
>>>> >> >>>>>>> >> --------------------
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> gluster logs :-
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.147471] I [MSGID: 100030]
>>>> >> >>>>>>> >> [glusterfsd.c:2018:main]
>>>> >> >>>>>>> >> 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd
>>>> >> >>>>>>> >> version
>>>> >> >>>>>>> >> 3.6.1
>>>> >> >>>>>>> >> (args: /usr/sbin/glusterd -p /var/run/glusterd.pid)
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.151565] I [glusterd.c:1214:init]
>>>> >> >>>>>>> >> 0-management:
>>>> >> >>>>>>> >> Maximum allowed open file descriptors set to 65536
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.151599] I [glusterd.c:1259:init]
>>>> >> >>>>>>> >> 0-management:
>>>> >> >>>>>>> >> Using
>>>> >> >>>>>>> >> /var/lib/glusterd as working directory
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.155216] W
>>>> >> >>>>>>> >> [rdma.c:4195:__gf_rdma_ctx_create]
>>>> >> >>>>>>> >> 0-rpc-transport/rdma: rdma_cm event channel creation
>>>> failed (No
>>>> >> >>>>>>> >> such device)
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.155264] E [rdma.c:4483:init]
>>>> >> >>>>>>> >> 0-rdma.management:
>>>> >> >>>>>>> >> Failed to initialize IB Device
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.155285] E
>>>> >> >>>>>>> >> [rpc-transport.c:333:rpc_transport_load]
>>>> >> >>>>>>> >> 0-rpc-transport: 'rdma' initialization failed
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.155354] W
>>>> >> >>>>>>> >> [rpcsvc.c:1524:rpcsvc_transport_create]
>>>> >> >>>>>>> >> 0-rpc-service: cannot create listener, initing the
>>>> transport
>>>> >> >>>>>>> >> failed
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.156290] I
>>>> >> >>>>>>> >> [glusterd.c:413:glusterd_check_gsync_present] 0-glusterd:
>>>> >> >>>>>>> >> geo-replication
>>>> >> >>>>>>> >> module not installed in the system
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.161318] I
>>>> >> >>>>>>> >> [glusterd-store.c:2043:glusterd_restore_op_version]
>>>> 0-glusterd:
>>>> >> >>>>>>> >> retrieved
>>>> >> >>>>>>> >> op-version: 30600
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.821800] I
>>>> >> >>>>>>> >>
>>>> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo]
>>>> >> >>>>>>> >> 0-management:
>>>> >> >>>>>>> >> connect returned 0
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.825810] I
>>>> >> >>>>>>> >>
>>>> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo]
>>>> >> >>>>>>> >> 0-management:
>>>> >> >>>>>>> >> connect returned 0
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.828705] I
>>>> >> >>>>>>> >>
>>>> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo]
>>>> >> >>>>>>> >> 0-management:
>>>> >> >>>>>>> >> connect returned 0
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.828771] I
>>>> >> >>>>>>> >> [rpc-clnt.c:969:rpc_clnt_connection_init]
>>>> >> >>>>>>> >> 0-management: setting frame-timeout to 600
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.832670] I
>>>> >> >>>>>>> >> [rpc-clnt.c:969:rpc_clnt_connection_init]
>>>> >> >>>>>>> >> 0-management: setting frame-timeout to 600
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.835919] I
>>>> >> >>>>>>> >> [rpc-clnt.c:969:rpc_clnt_connection_init]
>>>> >> >>>>>>> >> 0-management: setting frame-timeout to 600
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.840209] E
>>>> >> >>>>>>> >> [glusterd-store.c:4248:glusterd_resolve_all_bricks]
>>>> 0-glusterd:
>>>> >> >>>>>>> >> resolve
>>>> >> >>>>>>> >> brick failed in restore
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.840233] E [xlator.c:425:xlator_init]
>>>> >> >>>>>>> >> 0-management:
>>>> >> >>>>>>> >> Initialization of volume 'management' failed, review your
>>>> >> >>>>>>> >> volfile
>>>> >> >>>>>>> >> again
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.840245] E
>>>> >> >>>>>>> >> [graph.c:322:glusterfs_graph_init]
>>>> >> >>>>>>> >> 0-management: initializing translator failed
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.840264] E
>>>> >> >>>>>>> >> [graph.c:525:glusterfs_graph_activate]
>>>> >> >>>>>>> >> 0-graph: init failed
>>>> >> >>>>>>> >> [2014-11-24 09:22:22.840754] W
>>>> >> >>>>>>> >> [glusterfsd.c:1194:cleanup_and_exit]
>>>> >> >>>>>>> >> (-->
>>>> >> >>>>>>> >> 0-: received signum (0), shutting down
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> Thanks,
>>>> >> >>>>>>> >> Punit
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >>
>>>> >> >>>>>>> >> On Wed, Nov 26, 2014 at 7:14 PM, Kaushal M
>>>> >> >>>>>>> >> <kshlmster at gmail.com>
>>>> >> >>>>>>> >> wrote:
>>>> >> >>>>>>> >>>
>>>> >> >>>>>>> >>> Based on the logs I can guess that glusterd is being
>>>> started
>>>> >> >>>>>>> >>> before
>>>> >> >>>>>>> >>> the network has come up and that the addresses given to
>>>> bricks
>>>> >> >>>>>>> >>> do
>>>> >> >>>>>>> >>> not
>>>> >> >>>>>>> >>> directly match the addresses used in during peer probe.
>>>> >> >>>>>>> >>>
>>>> >> >>>>>>> >>> The gluster_after_reboot log has the line "[2014-11-25
>>>> >> >>>>>>> >>> 06:46:09.972113] E
>>>> >> >>>>>>> >>> [glusterd-store.c:2632:glusterd_resolve_all_bricks]
>>>> >> >>>>>>> >>> 0-glusterd: resolve brick failed in restore".
>>>> >> >>>>>>> >>>
>>>> >> >>>>>>> >>> Brick resolution fails when glusterd cannot match the
>>>> address
>>>> >> >>>>>>> >>> for
>>>> >> >>>>>>> >>> the
>>>> >> >>>>>>> >>> brick, with one of the peers. Brick resolution happens
>>>> in two
>>>> >> >>>>>>> >>> phases,
>>>> >> >>>>>>> >>> 1. We first try to identify the peer by performing string
>>>> >> >>>>>>> >>> comparisions
>>>> >> >>>>>>> >>> with the brick address and the peer addresses (The peer
>>>> names
>>>> >> >>>>>>> >>> will
>>>> >> >>>>>>> >>> be
>>>> >> >>>>>>> >>> the names/addresses that were given when the peer was
>>>> probed).
>>>> >> >>>>>>> >>> 2. If we don't find a match from step 1, we will then
>>>> resolve
>>>> >> >>>>>>> >>> all
>>>> >> >>>>>>> >>> the
>>>> >> >>>>>>> >>> brick address and the peer addresses into addrinfo
>>>> structs,
>>>> >> >>>>>>> >>> and
>>>> >> >>>>>>> >>> then
>>>> >> >>>>>>> >>> compare these structs to find a match. This process
>>>> should
>>>> >> >>>>>>> >>> generally
>>>> >> >>>>>>> >>> find a match if available. This will fail only if the
>>>> network
>>>> >> >>>>>>> >>> is
>>>> >> >>>>>>> >>> not
>>>> >> >>>>>>> >>> up yet as we cannot resolve addresses.
>>>> >> >>>>>>> >>>
>>>> >> >>>>>>> >>> The above steps are applicable only to glusterfs versions
>>>> >> >>>>>>> >>> >=3.6.
>>>> >> >>>>>>> >>> They
>>>> >> >>>>>>> >>> were introduced to reduce problems with peer
>>>> identification,
>>>> >> >>>>>>> >>> like
>>>> >> >>>>>>> >>> the
>>>> >> >>>>>>> >>> one you encountered
>>>> >> >>>>>>> >>>
>>>> >> >>>>>>> >>> Since both of the steps failed to find a match in one
>>>> run, but
>>>> >> >>>>>>> >>> succeeded later, we can come to the conclusion that,
>>>> >> >>>>>>> >>> a) the bricks don't have the exact same string used in
>>>> peer
>>>> >> >>>>>>> >>> probe
>>>> >> >>>>>>> >>> for
>>>> >> >>>>>>> >>> their addresses as step 1 failed, and
>>>> >> >>>>>>> >>> b) the network was not up in the initial run, as step 2
>>>> failed
>>>> >> >>>>>>> >>> during
>>>> >> >>>>>>> >>> the initial run, but passed in the second run.
>>>> >> >>>>>>> >>>
>>>> >> >>>>>>> >>> Please let me know if my conclusion is correct.
>>>> >> >>>>>>> >>>
>>>> >> >>>>>>> >>> If it is, you can solve your problem in two ways.
>>>> >> >>>>>>> >>> 1. Use the same string for doing the peer probe and for
>>>> the
>>>> >> >>>>>>> >>> brick
>>>> >> >>>>>>> >>> address during volume create/add-brick. Ideally, we
>>>> suggest
>>>> >> >>>>>>> >>> you
>>>> >> >>>>>>> >>> use
>>>> >> >>>>>>> >>> properly resolvable FQDNs everywhere. If that is not
>>>> possible,
>>>> >> >>>>>>> >>> then
>>>> >> >>>>>>> >>> use only IP addresses. Try to avoid short names.
>>>> >> >>>>>>> >>> 2. During boot up, make sure to launch glusterd only
>>>> after the
>>>> >> >>>>>>> >>> network
>>>> >> >>>>>>> >>> is up. This will allow the new peer identification
>>>> mechanism
>>>> >> >>>>>>> >>> to do
>>>> >> >>>>>>> >>> its
>>>> >> >>>>>>> >>> job correctly.
>>>> >> >>>>>>> >>>
>>>> >> >>>>>>> >>>
>>>> >> >>>>>>> >>> If you have already followed these steps and yet still
>>>> hit the
>>>> >> >>>>>>> >>> problem, then please provide more information (setup,
>>>> logs,
>>>> >> >>>>>>> >>> etc.).
>>>> >> >>>>>>> >>> It
>>>> >> >>>>>>> >>> could be much different problem that you are facing.
>>>> >> >>>>>>> >>>
>>>> >> >>>>>>> >>> ~kaushal
>>>> >> >>>>>>> >>>
>>>> >> >>>>>>> >>> On Wed, Nov 26, 2014 at 4:01 PM, Punit Dambiwal
>>>> >> >>>>>>> >>> <hypunit at gmail.com>
>>>> >> >>>>>>> >>> wrote:
>>>> >> >>>>>>> >>> > Is there any one can help on this ??
>>>> >> >>>>>>> >>> >
>>>> >> >>>>>>> >>> > Thanks,
>>>> >> >>>>>>> >>> > punit
>>>> >> >>>>>>> >>> >
>>>> >> >>>>>>> >>> > On Wed, Nov 26, 2014 at 9:42 AM, Punit Dambiwal
>>>> >> >>>>>>> >>> > <hypunit at gmail.com>
>>>> >> >>>>>>> >>> > wrote:
>>>> >> >>>>>>> >>> >>
>>>> >> >>>>>>> >>> >> Hi,
>>>> >> >>>>>>> >>> >>
>>>> >> >>>>>>> >>> >> My Glusterfs version is :- glusterfs-3.6.1-1.el7
>>>> >> >>>>>>> >>> >>
>>>> >> >>>>>>> >>> >> On Wed, Nov 26, 2014 at 1:59 AM, Kanagaraj Mayilsamy
>>>> >> >>>>>>> >>> >> <kmayilsa at redhat.com>
>>>> >> >>>>>>> >>> >> wrote:
>>>> >> >>>>>>> >>> >>>
>>>> >> >>>>>>> >>> >>> [+Gluster-users at gluster.org]
>>>> >> >>>>>>> >>> >>>
>>>> >> >>>>>>> >>> >>> "Initialization of volume 'management' failed,
>>>> review your
>>>> >> >>>>>>> >>> >>> volfile
>>>> >> >>>>>>> >>> >>> again", glusterd throws this error when the service
>>>> is
>>>> >> >>>>>>> >>> >>> started
>>>> >> >>>>>>> >>> >>> automatically
>>>> >> >>>>>>> >>> >>> after the reboot. But the service is successfully
>>>> started
>>>> >> >>>>>>> >>> >>> later
>>>> >> >>>>>>> >>> >>> manually by
>>>> >> >>>>>>> >>> >>> the user.
>>>> >> >>>>>>> >>> >>>
>>>> >> >>>>>>> >>> >>> can somebody from gluster-users please help on this?
>>>> >> >>>>>>> >>> >>>
>>>> >> >>>>>>> >>> >>> glusterfs version: 3.5.1
>>>> >> >>>>>>> >>> >>>
>>>> >> >>>>>>> >>> >>> Thanks,
>>>> >> >>>>>>> >>> >>> Kanagaraj
>>>> >> >>>>>>> >>> >>>
>>>> >> >>>>>>> >>> >>> ----- Original Message -----
>>>> >> >>>>>>> >>> >>> > From: "Punit Dambiwal" <hypunit at gmail.com>
>>>> >> >>>>>>> >>> >>> > To: "Kanagaraj" <kmayilsa at redhat.com>
>>>> >> >>>>>>> >>> >>> > Cc: users at ovirt.org
>>>> >> >>>>>>> >>> >>> > Sent: Tuesday, November 25, 2014 7:24:45 PM
>>>> >> >>>>>>> >>> >>> > Subject: Re: [ovirt-users] Gluster command
>>>> [<UNKNOWN>]
>>>> >> >>>>>>> >>> >>> > failed on
>>>> >> >>>>>>> >>> >>> > server...
>>>> >> >>>>>>> >>> >>> >
>>>> >> >>>>>>> >>> >>> > Hi Kanagraj,
>>>> >> >>>>>>> >>> >>> >
>>>> >> >>>>>>> >>> >>> > Please check the attached log files....i didn't
>>>> find any
>>>> >> >>>>>>> >>> >>> > thing
>>>> >> >>>>>>> >>> >>> > special....
>>>> >> >>>>>>> >>> >>> >
>>>> >> >>>>>>> >>> >>> > On Tue, Nov 25, 2014 at 12:12 PM, Kanagaraj
>>>> >> >>>>>>> >>> >>> > <kmayilsa at redhat.com>
>>>> >> >>>>>>> >>> >>> > wrote:
>>>> >> >>>>>>> >>> >>> >
>>>> >> >>>>>>> >>> >>> > > Do you see any errors in
>>>> >> >>>>>>> >>> >>> > >
>>>> /var/log/glusterfs/etc-glusterfs-glusterd.vol.log or
>>>> >> >>>>>>> >>> >>> > > vdsm.log
>>>> >> >>>>>>> >>> >>> > > when
>>>> >> >>>>>>> >>> >>> > > the
>>>> >> >>>>>>> >>> >>> > > service is trying to start automatically after
>>>> the
>>>> >> >>>>>>> >>> >>> > > reboot?
>>>> >> >>>>>>> >>> >>> > >
>>>> >> >>>>>>> >>> >>> > > Thanks,
>>>> >> >>>>>>> >>> >>> > > Kanagaraj
>>>> >> >>>>>>> >>> >>> > >
>>>> >> >>>>>>> >>> >>> > >
>>>> >> >>>>>>> >>> >>> > > On 11/24/2014 08:13 PM, Punit Dambiwal wrote:
>>>> >> >>>>>>> >>> >>> > >
>>>> >> >>>>>>> >>> >>> > > Hi Kanagaraj,
>>>> >> >>>>>>> >>> >>> > >
>>>> >> >>>>>>> >>> >>> > > Yes...once i will start the gluster service and
>>>> then
>>>> >> >>>>>>> >>> >>> > > vdsmd
>>>> >> >>>>>>> >>> >>> > > ...the
>>>> >> >>>>>>> >>> >>> > > host
>>>> >> >>>>>>> >>> >>> > > can connect to cluster...but the question is why
>>>> it's
>>>> >> >>>>>>> >>> >>> > > not
>>>> >> >>>>>>> >>> >>> > > started
>>>> >> >>>>>>> >>> >>> > > even it
>>>> >> >>>>>>> >>> >>> > > has chkconfig enabled...
>>>> >> >>>>>>> >>> >>> > >
>>>> >> >>>>>>> >>> >>> > > I have tested it in two host cluster
>>>> >> >>>>>>> >>> >>> > > environment...(Centos 6.6
>>>> >> >>>>>>> >>> >>> > > and
>>>> >> >>>>>>> >>> >>> > > centos 7.0) on both hypervisior cluster..it's
>>>> failed
>>>> >> >>>>>>> >>> >>> > > to
>>>> >> >>>>>>> >>> >>> > > reconnect
>>>> >> >>>>>>> >>> >>> > > in
>>>> >> >>>>>>> >>> >>> > > to
>>>> >> >>>>>>> >>> >>> > > cluster after reboot....
>>>> >> >>>>>>> >>> >>> > >
>>>> >> >>>>>>> >>> >>> > > In both the environment glusterd enabled for
>>>> next
>>>> >> >>>>>>> >>> >>> > > boot....but
>>>> >> >>>>>>> >>> >>> > > it's
>>>> >> >>>>>>> >>> >>> > > failed with the same error....seems it's bug in
>>>> either
>>>> >> >>>>>>> >>> >>> > > gluster or
>>>> >> >>>>>>> >>> >>> > > Ovirt ??
>>>> >> >>>>>>> >>> >>> > >
>>>> >> >>>>>>> >>> >>> > > Please help me to find the workaround here if
>>>> can not
>>>> >> >>>>>>> >>> >>> > > resolve
>>>> >> >>>>>>> >>> >>> > > it...as
>>>> >> >>>>>>> >>> >>> > > without this the Host machine can not connect
>>>> after
>>>> >> >>>>>>> >>> >>> > > reboot....that
>>>> >> >>>>>>> >>> >>> > > means
>>>> >> >>>>>>> >>> >>> > > engine will consider it as down and every time
>>>> need to
>>>> >> >>>>>>> >>> >>> > > manually
>>>> >> >>>>>>> >>> >>> > > start
>>>> >> >>>>>>> >>> >>> > > the
>>>> >> >>>>>>> >>> >>> > > gluster service and vdsmd... ??
>>>> >> >>>>>>> >>> >>> > >
>>>> >> >>>>>>> >>> >>> > > Thanks,
>>>> >> >>>>>>> >>> >>> > > Punit
>>>> >> >>>>>>> >>> >>> > >
>>>> >> >>>>>>> >>> >>> > > On Mon, Nov 24, 2014 at 10:20 PM, Kanagaraj
>>>> >> >>>>>>> >>> >>> > > <kmayilsa at redhat.com>
>>>> >> >>>>>>> >>> >>> > > wrote:
>>>> >> >>>>>>> >>> >>> > >
>>>> >> >>>>>>> >>> >>> > >> From vdsm.log "error: Connection failed. Please
>>>> >> >>>>>>> >>> >>> > >> check if
>>>> >> >>>>>>> >>> >>> > >> gluster
>>>> >> >>>>>>> >>> >>> > >> daemon
>>>> >> >>>>>>> >>> >>> > >> is operational."
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >> Starting glusterd service should fix this issue.
>>>> >> >>>>>>> >>> >>> > >> 'service
>>>> >> >>>>>>> >>> >>> > >> glusterd
>>>> >> >>>>>>> >>> >>> > >> start'
>>>> >> >>>>>>> >>> >>> > >> But i am wondering why the glusterd was not
>>>> started
>>>> >> >>>>>>> >>> >>> > >> automatically
>>>> >> >>>>>>> >>> >>> > >> after
>>>> >> >>>>>>> >>> >>> > >> the reboot.
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >> Thanks,
>>>> >> >>>>>>> >>> >>> > >> Kanagaraj
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >> On 11/24/2014 07:18 PM, Punit Dambiwal wrote:
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >> Hi Kanagaraj,
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >> Please find the attached VDSM logs :-
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >> ----------------
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:17,182::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
>>>> >> >>>>>>> >>> >>> > >> Owner.cancelAll requests {}
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:17,182::task::993::Storage.TaskManager.Task::(_decref)
>>>> >> >>>>>>> >>> >>> > >>
>>>> Task=`1691d409-9b27-4585-8281-5ec26154367a`::ref 0
>>>> >> >>>>>>> >>> >>> > >> aborting
>>>> >> >>>>>>> >>> >>> > >> False
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:32,393::task::595::Storage.TaskManager.Task::(_updateState)
>>>> >> >>>>>>> >>> >>> > >>
>>>> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving
>>>> >> >>>>>>> >>> >>> > >> from
>>>> >> >>>>>>> >>> >>> > >> state
>>>> >> >>>>>>> >>> >>> > >> init
>>>> >> >>>>>>> >>> >>> > >> ->
>>>> >> >>>>>>> >>> >>> > >> state preparing
>>>> >> >>>>>>> >>> >>> > >> Thread-13::INFO::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:32,393::logUtils::44::dispatcher::(wrapper) Run
>>>> >> >>>>>>> >>> >>> > >> and
>>>> >> >>>>>>> >>> >>> > >> protect:
>>>> >> >>>>>>> >>> >>> > >> repoStats(options=None)
>>>> >> >>>>>>> >>> >>> > >> Thread-13::INFO::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:32,393::logUtils::47::dispatcher::(wrapper) Run
>>>> >> >>>>>>> >>> >>> > >> and
>>>> >> >>>>>>> >>> >>> > >> protect:
>>>> >> >>>>>>> >>> >>> > >> repoStats, Return response: {}
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:32,393::task::1191::Storage.TaskManager.Task::(prepare)
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::finished: {}
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:32,394::task::595::Storage.TaskManager.Task::(_updateState)
>>>> >> >>>>>>> >>> >>> > >>
>>>> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving
>>>> >> >>>>>>> >>> >>> > >> from
>>>> >> >>>>>>> >>> >>> > >> state
>>>> >> >>>>>>> >>> >>> > >> preparing
>>>> >> >>>>>>> >>> >>> > >> ->
>>>> >> >>>>>>> >>> >>> > >> state finished
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:32,394::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)
>>>> >> >>>>>>> >>> >>> > >> Owner.releaseAll requests {} resources {}
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:32,394::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
>>>> >> >>>>>>> >>> >>> > >> Owner.cancelAll requests {}
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:32,394::task::993::Storage.TaskManager.Task::(_decref)
>>>> >> >>>>>>> >>> >>> > >>
>>>> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::ref 0
>>>> >> >>>>>>> >>> >>> > >> aborting
>>>> >> >>>>>>> >>> >>> > >> False
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:41,550::BindingXMLRPC::1132::vds::(wrapper)
>>>> >> >>>>>>> >>> >>> > >> client
>>>> >> >>>>>>> >>> >>> > >> [10.10.10.2]::call
>>>> >> >>>>>>> >>> >>> > >> getCapabilities with () {}
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >> 21:41:41,553::utils::738::root::(execCmd)
>>>> >> >>>>>>> >>> >>> > >> /sbin/ip route show to 0.0.0.0/0 table all
>>>> (cwd None)
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >> 21:41:41,560::utils::758::root::(execCmd)
>>>> >> >>>>>>> >>> >>> > >> SUCCESS: <err> = ''; <rc> = 0
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:41,588::caps::728::root::(_getKeyPackages) rpm
>>>> >> >>>>>>> >>> >>> > >> package
>>>> >> >>>>>>> >>> >>> > >> ('gluster-swift',) not found
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:41,592::caps::728::root::(_getKeyPackages) rpm
>>>> >> >>>>>>> >>> >>> > >> package
>>>> >> >>>>>>> >>> >>> > >> ('gluster-swift-object',) not found
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:41,593::caps::728::root::(_getKeyPackages) rpm
>>>> >> >>>>>>> >>> >>> > >> package
>>>> >> >>>>>>> >>> >>> > >> ('gluster-swift-plugin',) not found
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm
>>>> >> >>>>>>> >>> >>> > >> package
>>>> >> >>>>>>> >>> >>> > >> ('gluster-swift-account',) not found
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm
>>>> >> >>>>>>> >>> >>> > >> package
>>>> >> >>>>>>> >>> >>> > >> ('gluster-swift-proxy',) not found
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm
>>>> >> >>>>>>> >>> >>> > >> package
>>>> >> >>>>>>> >>> >>> > >> ('gluster-swift-doc',) not found
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm
>>>> >> >>>>>>> >>> >>> > >> package
>>>> >> >>>>>>> >>> >>> > >> ('gluster-swift-container',) not found
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm
>>>> >> >>>>>>> >>> >>> > >> package
>>>> >> >>>>>>> >>> >>> > >> ('glusterfs-geo-replication',) not found
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >> 21:41:41,600::caps::646::root::(get)
>>>> >> >>>>>>> >>> >>> > >> VirtioRNG DISABLED: libvirt version
>>>> 0.10.2-29.el6_5.9
>>>> >> >>>>>>> >>> >>> > >> required
>>>> >> >>>>>>> >>> >>> > >> >=
>>>> >> >>>>>>> >>> >>> > >> 0.10.2-31
>>>> >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24
>>>> >> >>>>>>> >>> >>> > >>
>>>> 21:41:41,603::BindingXMLRPC::1139::vds::(wrapper)
>>>> >> >>>>>>> >>> >>> > >> return
>>>> >> >>>>>>> >>> >>> > >> getCapabilities
>>>> >> >>>>>>> >>> >>> > >> with {'status': {'message': 'Done', 'code': 0},
>>>> >> >>>>>>> >>> >>> > >> 'info':
>>>> >> >>>>>>> >>> >>> > >> {'HBAInventory':
>>>> >> >>>>>>> >>> >>> > >> {'iSCSI': [{'InitiatorName':
>>>> >> >>>>>>> >>> >>> > >> 'iqn.1994-05.com.redhat:32151ce183c8'}],
>>>> >> >>>>>>> >>> >>> > >> 'FC':
>>>> >> >>>>>>> >>> >>> > >> []}, 'packages2': {'kernel': {'release':
>>>> >> >>>>>>> >>> >>> > >> '431.el6.x86_64',
>>>> >> >>>>>>> >>> >>> > >> 'buildtime':
>>>> >> >>>>>>> >>> >>> > >> 1385061309.0, 'version': '2.6.32'},
>>>> 'glusterfs-rdma':
>>>> >> >>>>>>> >>> >>> > >> {'release':
>>>> >> >>>>>>> >>> >>> > >> '1.el6',
>>>> >> >>>>>>> >>> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'},
>>>> >> >>>>>>> >>> >>> > >> 'glusterfs-fuse':
>>>> >> >>>>>>> >>> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L,
>>>> >> >>>>>>> >>> >>> > >> 'version':
>>>> >> >>>>>>> >>> >>> > >> '3.5.1'},
>>>> >> >>>>>>> >>> >>> > >> 'spice-server': {'release': '6.el6_5.2',
>>>> 'buildtime':
>>>> >> >>>>>>> >>> >>> > >> 1402324637L,
>>>> >> >>>>>>> >>> >>> > >> 'version': '0.12.4'}, 'vdsm': {'release':
>>>> >> >>>>>>> >>> >>> > >> '1.gitdb83943.el6',
>>>> >> >>>>>>> >>> >>> > >> 'buildtime':
>>>> >> >>>>>>> >>> >>> > >> 1412784567L, 'version': '4.16.7'}, 'qemu-kvm':
>>>> >> >>>>>>> >>> >>> > >> {'release':
>>>> >> >>>>>>> >>> >>> > >> '2.415.el6_5.10', 'buildtime': 1402435700L,
>>>> >> >>>>>>> >>> >>> > >> 'version':
>>>> >> >>>>>>> >>> >>> > >> '0.12.1.2'},
>>>> >> >>>>>>> >>> >>> > >> 'qemu-img': {'release': '2.415.el6_5.10',
>>>> >> >>>>>>> >>> >>> > >> 'buildtime':
>>>> >> >>>>>>> >>> >>> > >> 1402435700L,
>>>> >> >>>>>>> >>> >>> > >> 'version': '0.12.1.2'}, 'libvirt': {'release':
>>>> >> >>>>>>> >>> >>> > >> '29.el6_5.9',
>>>> >> >>>>>>> >>> >>> > >> 'buildtime':
>>>> >> >>>>>>> >>> >>> > >> 1402404612L, 'version': '0.10.2'}, 'glusterfs':
>>>> >> >>>>>>> >>> >>> > >> {'release':
>>>> >> >>>>>>> >>> >>> > >> '1.el6',
>>>> >> >>>>>>> >>> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'},
>>>> 'mom':
>>>> >> >>>>>>> >>> >>> > >> {'release':
>>>> >> >>>>>>> >>> >>> > >> '2.el6',
>>>> >> >>>>>>> >>> >>> > >> 'buildtime': 1403794344L, 'version': '0.4.1'},
>>>> >> >>>>>>> >>> >>> > >> 'glusterfs-server':
>>>> >> >>>>>>> >>> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L,
>>>> >> >>>>>>> >>> >>> > >> 'version':
>>>> >> >>>>>>> >>> >>> > >> '3.5.1'}},
>>>> >> >>>>>>> >>> >>> > >> 'numaNodeDistance': {'1': [20, 10], '0': [10,
>>>> 20]},
>>>> >> >>>>>>> >>> >>> > >> 'cpuModel':
>>>> >> >>>>>>> >>> >>> > >> 'Intel(R)
>>>> >> >>>>>>> >>> >>> > >> Xeon(R) CPU X5650 @ 2.67GHz',
>>>> 'liveMerge':
>>>> >> >>>>>>> >>> >>> > >> 'false',
>>>> >> >>>>>>> >>> >>> > >> 'hooks':
>>>> >> >>>>>>> >>> >>> > >> {},
>>>> >> >>>>>>> >>> >>> > >> 'cpuSockets': '2', 'vmTypes': ['kvm'],
>>>> 'selinux':
>>>> >> >>>>>>> >>> >>> > >> {'mode': '1'},
>>>> >> >>>>>>> >>> >>> > >> 'kdumpStatus': 0, 'supportedProtocols': ['2.2',
>>>> >> >>>>>>> >>> >>> > >> '2.3'],
>>>> >> >>>>>>> >>> >>> > >> 'networks':
>>>> >> >>>>>>> >>> >>> > >> {'ovirtmgmt': {'iface': u'bond0.10', 'addr':
>>>> >> >>>>>>> >>> >>> > >> '43.252.176.16',
>>>> >> >>>>>>> >>> >>> > >> 'bridged':
>>>> >> >>>>>>> >>> >>> > >> False, 'ipv6addrs':
>>>> ['fe80::62eb:69ff:fe20:b46c/64'],
>>>> >> >>>>>>> >>> >>> > >> 'mtu':
>>>> >> >>>>>>> >>> >>> > >> '1500',
>>>> >> >>>>>>> >>> >>> > >> 'bootproto4': 'none', 'netmask':
>>>> '255.255.255.0',
>>>> >> >>>>>>> >>> >>> > >> 'ipv4addrs':
>>>> >> >>>>>>> >>> >>> > >> ['
>>>> >> >>>>>>> >>> >>> > >> 43.252.176.16/24' <http://43.252.176.16/24%27
>>>> >],
>>>> >> >>>>>>> >>> >>> > >> 'interface':
>>>> >> >>>>>>> >>> >>> > >> u'bond0.10', 'ipv6gateway': '::', 'gateway':
>>>> >> >>>>>>> >>> >>> > >> '43.25.17.1'},
>>>> >> >>>>>>> >>> >>> > >> 'Internal':
>>>> >> >>>>>>> >>> >>> > >> {'iface': 'Internal', 'addr': '', 'cfg':
>>>> {'DEFROUTE':
>>>> >> >>>>>>> >>> >>> > >> 'no',
>>>> >> >>>>>>> >>> >>> > >> 'HOTPLUG':
>>>> >> >>>>>>> >>> >>> > >> 'no', 'MTU': '9000', 'DELAY': '0',
>>>> 'NM_CONTROLLED':
>>>> >> >>>>>>> >>> >>> > >> 'no',
>>>> >> >>>>>>> >>> >>> > >> 'BOOTPROTO':
>>>> >> >>>>>>> >>> >>> > >> 'none', 'STP': 'off', 'DEVICE': 'Internal',
>>>> 'TYPE':
>>>> >> >>>>>>> >>> >>> > >> 'Bridge',
>>>> >> >>>>>>> >>> >>> > >> 'ONBOOT':
>>>> >> >>>>>>> >>> >>> > >> 'no'}, 'bridged': True, 'ipv6addrs':
>>>> >> >>>>>>> >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'],
>>>> >> >>>>>>> >>> >>> > >> 'gateway': '', 'bootproto4': 'none', 'netmask':
>>>> '',
>>>> >> >>>>>>> >>> >>> > >> 'stp':
>>>> >> >>>>>>> >>> >>> > >> 'off',
>>>> >> >>>>>>> >>> >>> > >> 'ipv4addrs': [], 'mtu': '9000', 'ipv6gateway':
>>>> '::',
>>>> >> >>>>>>> >>> >>> > >> 'ports':
>>>> >> >>>>>>> >>> >>> > >> ['bond1.100']}, 'storage': {'iface': u'bond1',
>>>> >> >>>>>>> >>> >>> > >> 'addr':
>>>> >> >>>>>>> >>> >>> > >> '10.10.10.6',
>>>> >> >>>>>>> >>> >>> > >> 'bridged': False, 'ipv6addrs':
>>>> >> >>>>>>> >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'],
>>>> >> >>>>>>> >>> >>> > >> 'mtu':
>>>> >> >>>>>>> >>> >>> > >> '9000', 'bootproto4': 'none', 'netmask':
>>>> >> >>>>>>> >>> >>> > >> '255.255.255.0',
>>>> >> >>>>>>> >>> >>> > >> 'ipv4addrs': ['
>>>> >> >>>>>>> >>> >>> > >> 10.10.10.6/24' <http://10.10.10.6/24%27>],
>>>> >> >>>>>>> >>> >>> > >> 'interface':
>>>> >> >>>>>>> >>> >>> > >> u'bond1',
>>>> >> >>>>>>> >>> >>> > >> 'ipv6gateway': '::', 'gateway': ''},
>>>> 'VMNetwork':
>>>> >> >>>>>>> >>> >>> > >> {'iface':
>>>> >> >>>>>>> >>> >>> > >> 'VMNetwork',
>>>> >> >>>>>>> >>> >>> > >> 'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG':
>>>> >> >>>>>>> >>> >>> > >> 'no',
>>>> >> >>>>>>> >>> >>> > >> 'MTU':
>>>> >> >>>>>>> >>> >>> > >> '1500',
>>>> >> >>>>>>> >>> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no',
>>>> 'BOOTPROTO':
>>>> >> >>>>>>> >>> >>> > >> 'none',
>>>> >> >>>>>>> >>> >>> > >> 'STP':
>>>> >> >>>>>>> >>> >>> > >> 'off',
>>>> >> >>>>>>> >>> >>> > >> 'DEVICE': 'VMNetwork', 'TYPE': 'Bridge',
>>>> 'ONBOOT':
>>>> >> >>>>>>> >>> >>> > >> 'no'},
>>>> >> >>>>>>> >>> >>> > >> 'bridged':
>>>> >> >>>>>>> >>> >>> > >> True,
>>>> >> >>>>>>> >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'],
>>>> >> >>>>>>> >>> >>> > >> 'gateway':
>>>> >> >>>>>>> >>> >>> > >> '',
>>>> >> >>>>>>> >>> >>> > >> 'bootproto4':
>>>> >> >>>>>>> >>> >>> > >> 'none', 'netmask': '', 'stp': 'off',
>>>> 'ipv4addrs': [],
>>>> >> >>>>>>> >>> >>> > >> 'mtu':
>>>> >> >>>>>>> >>> >>> > >> '1500',
>>>> >> >>>>>>> >>> >>> > >> 'ipv6gateway': '::', 'ports': ['bond0.36']}},
>>>> >> >>>>>>> >>> >>> > >> 'bridges':
>>>> >> >>>>>>> >>> >>> > >> {'Internal':
>>>> >> >>>>>>> >>> >>> > >> {'addr': '', 'cfg': {'DEFROUTE': 'no',
>>>> 'HOTPLUG':
>>>> >> >>>>>>> >>> >>> > >> 'no',
>>>> >> >>>>>>> >>> >>> > >> 'MTU':
>>>> >> >>>>>>> >>> >>> > >> '9000',
>>>> >> >>>>>>> >>> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no',
>>>> 'BOOTPROTO':
>>>> >> >>>>>>> >>> >>> > >> 'none',
>>>> >> >>>>>>> >>> >>> > >> 'STP':
>>>> >> >>>>>>> >>> >>> > >> 'off',
>>>> >> >>>>>>> >>> >>> > >> 'DEVICE': 'Internal', 'TYPE': 'Bridge',
>>>> 'ONBOOT':
>>>> >> >>>>>>> >>> >>> > >> 'no'},
>>>> >> >>>>>>> >>> >>> > >> 'ipv6addrs':
>>>> >> >>>>>>> >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'], 'mtu': '9000',
>>>> >> >>>>>>> >>> >>> > >> 'netmask': '',
>>>> >> >>>>>>> >>> >>> > >> 'stp':
>>>> >> >>>>>>> >>> >>> > >> 'off', 'ipv4addrs': [], 'ipv6gateway': '::',
>>>> >> >>>>>>> >>> >>> > >> 'gateway':
>>>> >> >>>>>>> >>> >>> > >> '',
>>>> >> >>>>>>> >>> >>> > >> 'opts':
>>>> >> >>>>>>> >>> >>> > >> {'topology_change_detected': '0',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_last_member_count':
>>>> >> >>>>>>> >>> >>> > >> '2',
>>>> >> >>>>>>> >>> >>> > >> 'hash_elasticity': '4',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_query_response_interval':
>>>> >> >>>>>>> >>> >>> > >> '999',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_snooping': '1',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_startup_query_interval':
>>>> >> >>>>>>> >>> >>> > >> '3124',
>>>> >> >>>>>>> >>> >>> > >> 'hello_timer': '31',
>>>> 'multicast_querier_interval':
>>>> >> >>>>>>> >>> >>> > >> '25496',
>>>> >> >>>>>>> >>> >>> > >> 'max_age':
>>>> >> >>>>>>> >>> >>> > >> '1999', 'hash_max': '512', 'stp_state': '0',
>>>> >> >>>>>>> >>> >>> > >> 'root_id':
>>>> >> >>>>>>> >>> >>> > >> '8000.001018cddaac', 'priority': '32768',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_membership_interval':
>>>> >> >>>>>>> >>> >>> > >> '25996', 'root_path_cost': '0', 'root_port':
>>>> '0',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_querier':
>>>> >> >>>>>>> >>> >>> > >> '0',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_startup_query_count': '2',
>>>> 'hello_time':
>>>> >> >>>>>>> >>> >>> > >> '199',
>>>> >> >>>>>>> >>> >>> > >> 'topology_change': '0', 'bridge_id':
>>>> >> >>>>>>> >>> >>> > >> '8000.001018cddaac',
>>>> >> >>>>>>> >>> >>> > >> 'topology_change_timer': '0', 'ageing_time':
>>>> '29995',
>>>> >> >>>>>>> >>> >>> > >> 'gc_timer':
>>>> >> >>>>>>> >>> >>> > >> '31',
>>>> >> >>>>>>> >>> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_query_interval': '12498',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_last_member_interval':
>>>> >> >>>>>>> >>> >>> > >> '99', 'multicast_router': '1', 'forward_delay':
>>>> '0'},
>>>> >> >>>>>>> >>> >>> > >> 'ports':
>>>> >> >>>>>>> >>> >>> > >> ['bond1.100']}, 'VMNetwork': {'addr': '', 'cfg':
>>>> >> >>>>>>> >>> >>> > >> {'DEFROUTE':
>>>> >> >>>>>>> >>> >>> > >> 'no',
>>>> >> >>>>>>> >>> >>> > >> 'HOTPLUG': 'no', 'MTU': '1500', 'DELAY': '0',
>>>> >> >>>>>>> >>> >>> > >> 'NM_CONTROLLED':
>>>> >> >>>>>>> >>> >>> > >> 'no',
>>>> >> >>>>>>> >>> >>> > >> 'BOOTPROTO': 'none', 'STP': 'off', 'DEVICE':
>>>> >> >>>>>>> >>> >>> > >> 'VMNetwork',
>>>> >> >>>>>>> >>> >>> > >> 'TYPE':
>>>> >> >>>>>>> >>> >>> > >> 'Bridge',
>>>> >> >>>>>>> >>> >>> > >> 'ONBOOT': 'no'}, 'ipv6addrs':
>>>> >> >>>>>>> >>> >>> > >> ['fe80::62eb:69ff:fe20:b46c/64'],
>>>> >> >>>>>>> >>> >>> > >> 'mtu':
>>>> >> >>>>>>> >>> >>> > >> '1500', 'netmask': '', 'stp': 'off',
>>>> 'ipv4addrs': [],
>>>> >> >>>>>>> >>> >>> > >> 'ipv6gateway':
>>>> >> >>>>>>> >>> >>> > >> '::',
>>>> >> >>>>>>> >>> >>> > >> 'gateway': '', 'opts':
>>>> {'topology_change_detected':
>>>> >> >>>>>>> >>> >>> > >> '0',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_last_member_count': '2',
>>>> >> >>>>>>> >>> >>> > >> 'hash_elasticity':
>>>> >> >>>>>>> >>> >>> > >> '4',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_query_response_interval': '999',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_snooping':
>>>> >> >>>>>>> >>> >>> > >> '1',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_startup_query_interval': '3124',
>>>> >> >>>>>>> >>> >>> > >> 'hello_timer':
>>>> >> >>>>>>> >>> >>> > >> '131',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_querier_interval': '25496',
>>>> 'max_age':
>>>> >> >>>>>>> >>> >>> > >> '1999',
>>>> >> >>>>>>> >>> >>> > >> 'hash_max':
>>>> >> >>>>>>> >>> >>> > >> '512', 'stp_state': '0', 'root_id':
>>>> >> >>>>>>> >>> >>> > >> '8000.60eb6920b46c',
>>>> >> >>>>>>> >>> >>> > >> 'priority':
>>>> >> >>>>>>> >>> >>> > >> '32768', 'multicast_membership_interval':
>>>> '25996',
>>>> >> >>>>>>> >>> >>> > >> 'root_path_cost':
>>>> >> >>>>>>> >>> >>> > >> '0',
>>>> >> >>>>>>> >>> >>> > >> 'root_port': '0', 'multicast_querier': '0',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_startup_query_count': '2',
>>>> 'hello_time':
>>>> >> >>>>>>> >>> >>> > >> '199',
>>>> >> >>>>>>> >>> >>> > >> 'topology_change': '0', 'bridge_id':
>>>> >> >>>>>>> >>> >>> > >> '8000.60eb6920b46c',
>>>> >> >>>>>>> >>> >>> > >> 'topology_change_timer': '0', 'ageing_time':
>>>> '29995',
>>>> >> >>>>>>> >>> >>> > >> 'gc_timer':
>>>> >> >>>>>>> >>> >>> > >> '31',
>>>> >> >>>>>>> >>> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_query_interval': '12498',
>>>> >> >>>>>>> >>> >>> > >> 'multicast_last_member_interval':
>>>> >> >>>>>>> >>> >>> > >> '99', 'multicast_router': '1', 'forward_delay':
>>>> '0'},
>>>> >> >>>>>>> >>> >>> > >> 'ports':
>>>> >> >>>>>>> >>> >>> > >> ['bond0.36']}}, 'uuid':
>>>> >> >>>>>>> >>> >>> > >> '44454C4C-4C00-1057-8053-B7C04F504E31',
>>>> >> >>>>>>> >>> >>> > >> 'lastClientIface': 'bond1', 'nics': {'eth3':
>>>> >> >>>>>>> >>> >>> > >> {'permhwaddr':
>>>> >> >>>>>>> >>> >>> > >> '00:10:18:cd:da:ae', 'addr': '', 'cfg':
>>>> {'SLAVE':
>>>> >> >>>>>>> >>> >>> > >> 'yes',
>>>> >> >>>>>>> >>> >>> > >> 'NM_CONTROLLED':
>>>> >> >>>>>>> >>> >>> > >> 'no', 'MTU': '9000', 'HWADDR':
>>>> '00:10:18:cd:da:ae',
>>>> >> >>>>>>> >>> >>> > >> 'MASTER':
>>>> >> >>>>>>> >>> >>> > >> 'bond1',
>>>> >> >>>>>>> >>> >>> > >> 'DEVICE': 'eth3', 'ONBOOT': 'no'}, 'ipv6addrs':
>>>> [],
>>>> >> >>>>>>> >>> >>> > >> 'mtu':
>>>> >> >>>>>>> >>> >>> > >> '9000',
>>>> >> >>>>>>> >>> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr':
>>>> >> >>>>>>> >>> >>> > >> '00:10:18:cd:da:ac',
>>>> >> >>>>>>> >>> >>> > >> 'speed':
>>>> >> >>>>>>> >>> >>> > >> 1000}, 'eth2': {'permhwaddr':
>>>> '00:10:18:cd:da:ac',
>>>> >> >>>>>>> >>> >>> > >> 'addr': '',
>>>> >> >>>>>>> >>> >>> > >> 'cfg':
>>>> >> >>>>>>> >>> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU':
>>>> >> >>>>>>> >>> >>> > >> '9000',
>>>> >> >>>>>>> >>> >>> > >> 'HWADDR':
>>>> >> >>>>>>> >>> >>> > >> '00:10:18:cd:da:ac', 'MASTER': 'bond1',
>>>> 'DEVICE':
>>>> >> >>>>>>> >>> >>> > >> 'eth2',
>>>> >> >>>>>>> >>> >>> > >> 'ONBOOT':
>>>> >> >>>>>>> >>> >>> > >> 'no'},
>>>> >> >>>>>>> >>> >>> > >> 'ipv6addrs': [], 'mtu': '9000', 'netmask': '',
>>>> >> >>>>>>> >>> >>> > >> 'ipv4addrs': [],
>>>> >> >>>>>>> >>> >>> > >> 'hwaddr':
>>>> >> >>>>>>> >>> >>> > >> '00:10:18:cd:da:ac', 'speed': 1000}, 'eth1':
>>>> >> >>>>>>> >>> >>> > >> {'permhwaddr':
>>>> >> >>>>>>> >>> >>> > >> '60:eb:69:20:b4:6d', 'addr': '', 'cfg':
>>>> {'SLAVE':
>>>> >> >>>>>>> >>> >>> > >> 'yes',
>>>> >> >>>>>>> >>> >>> > >> 'NM_CONTROLLED':
>>>> >> >>>>>>> >>> >>> > >> 'no', 'MTU': '1500', 'HWADDR':
>>>> '60:eb:69:20:b4:6d',
>>>> >> >>>>>>> >>> >>> > >> 'MASTER':
>>>> >> >>>>>>> >>> >>> > >> 'bond0',
>>>> >> >>>>>>> >>> >>> > >> 'DEVICE': 'eth1', 'ONBOOT': 'yes'},
>>>> 'ipv6addrs': [],
>>>> >> >>>>>>> >>> >>> > >> 'mtu':
>>>> >> >>>>>>> >>> >>> > >> '1500',
>>>> >> >>>>>>> >>> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr':
>>>> >> >>>>>>> >>> >>> > >> '60:eb:69:20:b4:6c',
>>>> >> >>>>>>> >>> >>> > >> 'speed':
>>>> >> >>>>>>> >>> >>> > >> 1000}, 'eth0': {'permhwaddr':
>>>> '60:eb:69:20:b4:6c',
>>>> >> >>>>>>> >>> >>> > >> 'addr': '',
>>>> >> >>>>>>> >>> >>> > >> 'cfg':
>>>> >> >>>>>>> >>> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU':
>>>> >> >>>>>>> >>> >>> > >> '1500',
>>>> >> >>>>>>> >>> >>> > >> 'HWADDR':
>>>> >> >>>>>>> >>> >>> > >> '60:eb:69:20:b4:6c', 'MASTER': 'bond0',
>>>> 'DEVICE':
>>>> >> >>>>>>> >>> >>> > >> 'eth0',
>>>> >> >>>>>>> >>> >>> > >> 'ONBOOT':
>>>> >> >>>>>>> >>> >>> > >> 'yes'},
>>>> >> >>>>>>> >>> >>> > >> 'ipv6addrs': [], 'mtu': '1500', 'netmask': '',
>>>> >> >>>>>>> >>> >>> > >> 'ipv4addrs': [],
>>>> >> >>>>>>> >>> >>> > >> 'hwaddr':
>>>> >> >>>>>>> >>> >>> > >> '60:eb:69:20:b4:6c', 'speed': 1000}},
>>>> >> >>>>>>> >>> >>> > >> 'software_revision': '1',
>>>> >> >>>>>>> >>> >>> > >> 'clusterLevels': ['3.0', '3.1', '3.2', '3.3',
>>>> '3.4',
>>>> >> >>>>>>> >>> >>> > >> '3.5'],
>>>> >> >>>>>>> >>> >>> > >> 'cpuFlags':
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> >> >>>>>>> >>> >>> > >>
>>>> u'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270',
>>>> >> >>>>>>> >>> >>> > >> 'ISCSIInitiatorName':
>>>> >> >>>>>>> >>> >>> > >> 'iqn.1994-05.com.redhat:32151ce183c8',
>>>> >> >>>>>>> >>> >>> > >> 'netConfigDirty': 'False', 'supportedENGINEs':
>>>> >> >>>>>>> >>> >>> > >> ['3.0',
>>>> >> >>>>>>> >>> >>> > >> '3.1',
>>>> >> >>>>>>> >>> >>> > >> '3.2',
>>>> >> >>>>>>> >>> >>> > >> '3.3',
>>>> >> >>>>>>> >>> >>> > >> '3.4', '3.5'], 'autoNumaBalancing': 2,
>>>> 'reservedMem':
>>>> >> >>>>>>> >>> >>> > >> '321',
>>>> >> >>>>>>> >>> >>> > >> 'bondings':
>>>> >> >>>>>>> >>> >>> > >> {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500',
>>>> >> >>>>>>> >>> >>> > >> 'netmask': '',
>>>> >> >>>>>>> >>> >>> > >> 'slaves':
>>>> >> >>>>>>> >>> >>> > >> [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0':
>>>> {'addr':
>>>> >> >>>>>>> >>> >>> > >> '',
>>>> >> >>>>>>> >>> >>> > >> 'cfg':
>>>> >> >>>>>>> >>> >>> > >> {'HOTPLUG': 'no', 'MTU': '1500',
>>>> 'NM_CONTROLLED':
>>>> >> >>>>>>> >>> >>> > >> 'no',
>>>> >> >>>>>>> >>> >>> > >> 'BONDING_OPTS':
>>>> >> >>>>>>> >>> >>> > >> 'mode=4 miimon=100', 'DEVICE': 'bond0',
>>>> 'ONBOOT':
>>>> >> >>>>>>> >>> >>> > >> 'yes'},
>>>> >> >>>>>>> >>> >>> > >> 'ipv6addrs':
>>>> >> >>>>>>> >>> >>> > >> ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu': '1500',
>>>> >> >>>>>>> >>> >>> > >> 'netmask': '',
>>>> >> >>>>>>> >>> >>> > >> 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c',
>>>> >> >>>>>>> >>> >>> > >> 'slaves':
>>>> >> >>>>>>> >>> >>> > >> ['eth0',
>>>> >> >>>>>>> >>> >>> > >> 'eth1'],
>>>> >> >>>>>>> >>> >>> > >> 'opts': {'miimon': '100', 'mode': '4'}},
>>>> 'bond1':
>>>> >> >>>>>>> >>> >>> > >> {'addr':
>>>> >> >>>>>>> >>> >>> > >> '10.10.10.6',
>>>> >> >>>>>>> >>> >>> > >> 'cfg': {'DEFROUTE': 'no', 'IPADDR':
>>>> '10.10.10.6',
>>>> >> >>>>>>> >>> >>> > >> 'HOTPLUG':
>>>> >> >>>>>>> >>> >>> > >> 'no',
>>>> >> >>>>>>> >>> >>> > >> 'MTU':
>>>> >> >>>>>>> >>> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'NETMASK':
>>>> >> >>>>>>> >>> >>> > >> '255.255.255.0',
>>>> >> >>>>>>> >>> >>> > >> 'BOOTPROTO':
>>>> >> >>>>>>> >>> >>> > >> 'none', 'BONDING_OPTS': 'mode=4 miimon=100',
>>>> >> >>>>>>> >>> >>> > >> 'DEVICE':
>>>> >> >>>>>>> >>> >>> > >> 'bond1',
>>>> >> >>>>>>> >>> >>> > >> 'ONBOOT':
>>>> >> >>>>>>> >>> >>> > >> 'no'}, 'ipv6addrs':
>>>> ['fe80::210:18ff:fecd:daac/64'],
>>>> >> >>>>>>> >>> >>> > >> 'mtu':
>>>> >> >>>>>>> >>> >>> > >> '9000',
>>>> >> >>>>>>> >>> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs':
>>>> >> >>>>>>> >>> >>> > >> ['10.10.10.6/24'
>>>> >> >>>>>>> >>> >>> > >> <http://10.10.10.6/24%27>], 'hwaddr':
>>>> >> >>>>>>> >>> >>> > >> '00:10:18:cd:da:ac',
>>>> >> >>>>>>> >>>
>>>>
>>> ...
>>
>> [Mensaje recortado]
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20141212/311875cb/attachment-0001.html>
More information about the Users
mailing list