[Users] oVirt 3.3.3 RC EL6 Live Snapshot
Steve Dainard
sdainard at miovision.com
Mon Feb 3 12:32:24 EST 2014
When I trigger the live snapshot while pinging the guest I get the
following high latency but no packet loss:
...
64 bytes from 10.0.6.228: icmp_seq=32 ttl=63 time=0.267 ms
64 bytes from 10.0.6.228: icmp_seq=33 ttl=63 time=0.319 ms
64 bytes from 10.0.6.228: icmp_seq=34 ttl=63 time=0.231 ms
64 bytes from 10.0.6.228: icmp_seq=35 ttl=63 time=0.294 ms
64 bytes from 10.0.6.228: icmp_seq=36 ttl=63 time=0.357 ms
*64 bytes from 10.0.6.228 <http://10.0.6.228>: icmp_seq=37 ttl=63
time=10375 ms*
*64 bytes from 10.0.6.228 <http://10.0.6.228>: icmp_seq=38 ttl=63 time=9375
ms*
*64 bytes from 10.0.6.228 <http://10.0.6.228>: icmp_seq=39 ttl=63 time=8375
ms*
*64 bytes from 10.0.6.228 <http://10.0.6.228>: icmp_seq=40 ttl=63 time=7375
ms*
*64 bytes from 10.0.6.228 <http://10.0.6.228>: icmp_seq=41 ttl=63 time=6375
ms*
*64 bytes from 10.0.6.228 <http://10.0.6.228>: icmp_seq=42 ttl=63 time=5375
ms*
*64 bytes from 10.0.6.228 <http://10.0.6.228>: icmp_seq=43 ttl=63 time=4375
ms*
*64 bytes from 10.0.6.228 <http://10.0.6.228>: icmp_seq=44 ttl=63 time=3375
ms*
*64 bytes from 10.0.6.228 <http://10.0.6.228>: icmp_seq=45 ttl=63 time=2375
ms*
*64 bytes from 10.0.6.228 <http://10.0.6.228>: icmp_seq=46 ttl=63 time=1375
ms*
*64 bytes from 10.0.6.228 <http://10.0.6.228>: icmp_seq=47 ttl=63 time=375
ms*
64 bytes from 10.0.6.228: icmp_seq=48 ttl=63 time=0.324 ms
64 bytes from 10.0.6.228: icmp_seq=49 ttl=63 time=0.232 ms
64 bytes from 10.0.6.228: icmp_seq=50 ttl=63 time=0.318 ms
64 bytes from 10.0.6.228: icmp_seq=51 ttl=63 time=0.297 ms
64 bytes from 10.0.6.228: icmp_seq=52 ttl=63 time=0.343 ms
64 bytes from 10.0.6.228: icmp_seq=53 ttl=63 time=0.293 ms
64 bytes from 10.0.6.228: icmp_seq=54 ttl=63 time=0.286 ms
64 bytes from 10.0.6.228: icmp_seq=55 ttl=63 time=0.302 ms
64 bytes from 10.0.6.228: icmp_seq=56 ttl=63 time=0.304 ms
64 bytes from 10.0.6.228: icmp_seq=57 ttl=63 time=0.305 ms
^C
--- 10.0.6.228 ping statistics ---
57 packets transmitted, 57 received, 0% packet loss, time 56000ms
rtt min/avg/max/mdev = 0.228/1037.547/10375.035/2535.522 ms, pipe 11
So the guest is in some sort of paused mode, but its interesting that the
pings seems to be queued rather than dropped.
*Steve Dainard *
IT Infrastructure Manager
Miovision <http://miovision.com/> | *Rethink Traffic*
519-513-2407 ex.250
877-646-8476 (toll-free)
*Blog <http://miovision.com/blog> | **LinkedIn
<https://www.linkedin.com/company/miovision-technologies> | Twitter
<https://twitter.com/miovision> | Facebook
<https://www.facebook.com/miovision>*
------------------------------
Miovision Technologies Inc. | 148 Manitou Drive, Suite 101, Kitchener, ON,
Canada | N2C 1L3
This e-mail may contain information that is privileged or confidential. If
you are not the intended recipient, please delete the e-mail and any
attachments and notify us immediately.
On Mon, Feb 3, 2014 at 12:08 PM, Maor Lipchuk <mlipchuk at redhat.com> wrote:
> From the engine logs it seems that indeed live snapshot is called (The
> command is snapshotVDSCommand see [1]).
> This is done right after the snapshot has been created in the VM and it
> signals the qemu process to start using the new volume created.
>
> When live snapshot does not succeed we should see in the log something
> like "Wasn't able to live snapshot due to error:...", but it does not
> appear so it seems that this worked out fine.
>
> At some point I can see in the logs that VDSM reports to the engine that
> the VM is paused.
>
>
> [1]
> 2014-02-02 09:41:20,564 INFO
> [org.ovirt.engine.core.vdsbroker.vdsbroker.SnapshotVDSCommand]
> (pool-6-thread-49) START, SnapshotVDSCommand(HostName = ovirt002, HostId
> = 3080fb61-2d03-4008-b47f-9b66276a4257,
> vmId=e261e707-a21f-4ae8-9cff-f535f4430446), log id: 7e0d7872
> 2014-02-02 09:41:21,119 INFO
> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
> (DefaultQuartzScheduler_Worker-93) VM snapshot-test
> e261e707-a21f-4ae8-9cff-f535f4430446 moved from Up --> Paused
> 2014-02-02 09:41:30,234 INFO
> [org.ovirt.engine.core.vdsbroker.vdsbroker.SnapshotVDSCommand]
> (pool-6-thread-49) FINISH, SnapshotVDSCommand, log id: 7e0d7872
> 2014-02-02 09:41:30,238 INFO
> [org.ovirt.engine.core.bll.CreateSnapshotCommand] (pool-6-thread-49)
> [67ea047a] Ending command successfully:
> org.ovirt.engine.core.bll.CreateSnapshotCommand
> ...
>
> Regards,
> Maor
>
> On 02/03/2014 06:24 PM, Dafna Ron wrote:
> > Thanks Steve.
> >
> > from the logs I can see that the create snapshot succeeds and that the
> > vm is resumed.
> > the vm moves to pause as part of libvirt flows:
> >
> > 2014-02-02 14:41:20.872+0000: 5843: debug : qemuProcessHandleStop:728 :
> > Transitioned guest snapshot-test to paused state
> > 2014-02-02 14:41:30.031+0000: 5843: debug : qemuProcessHandleResume:776
> > : Transitioned guest snapshot-test out of paused into resumed state
> >
> > There are bugs here but I am not sure yet if this is libvirt regression
> > or engine.
> >
> > I'm adding Elad and Maor since in engine logs I can't see anything
> > calling for live snapshot (only for snapshot) - Maor, shouldn't live
> > snapshot command be logged somewhere in the logs?
> > Is it possible that engine is calling to create snapshot and not create
> > live snapshot which is why the vm pauses?
> >
> > Elad, if engine is not logging live snapshot anywhere I would open a bug
> > for engine (to print that in the logs).
> > Also, there is a bug in vdsm log for sdc where the below is logged as
> > ERROR and not INFO:
> >
> > Thread-23::ERROR::2014-02-02
> > 09:51:19,497::sdc::137::Storage.StorageDomainCache::(_findDomain)
> > looking for unfetched domain a52938f7-2cf4-4771-acb2-0c78d14999e5
> > Thread-23::ERROR::2014-02-02
> >
> 09:51:19,497::sdc::154::Storage.StorageDomainCache::(_findUnfetchedDomain)
> > looking for domain a52938f7-2cf4-4771-acb2-0c78d14999e5
> >
> > If the engine was sending live snapshot or if there is no difference in
> > the two commands in engine side than I would open a bug for libvirt for
> > pausing the vm during live snapshot.
> >
> > Dafna
> >
> > On 02/03/2014 02:41 PM, Steve Dainard wrote:
> >> [root at ovirt002 ~]# vdsClient -s 0 getStorageDomainInfo
> >> a52938f7-2cf4-4771-acb2-0c78d14999e5
> >> uuid = a52938f7-2cf4-4771-acb2-0c78d14999e5
> >> pool = ['fcb89071-6cdb-4972-94d1-c9324cebf814']
> >> lver = 5
> >> version = 3
> >> role = Master
> >> remotePath = gluster-store-vip:/rep1
> >> spm_id = 2
> >> type = NFS
> >> class = Data
> >> master_ver = 1
> >> name = gluster-store-rep1
> >>
> >>
> >> *Steve Dainard *
> >> IT Infrastructure Manager
> >> Miovision <http://miovision.com/> | /Rethink Traffic/
> >> 519-513-2407 ex.250
> >> 877-646-8476 (toll-free)
> >>
> >> *Blog <http://miovision.com/blog> | **LinkedIn
> >> <https://www.linkedin.com/company/miovision-technologies> | Twitter
> >> <https://twitter.com/miovision> | Facebook
> >> <https://www.facebook.com/miovision>*
> >> ------------------------------------------------------------------------
> >> Miovision Technologies Inc. | 148 Manitou Drive, Suite 101, Kitchener,
> >> ON, Canada | N2C 1L3
> >> This e-mail may contain information that is privileged or
> >> confidential. If you are not the intended recipient, please delete the
> >> e-mail and any attachments and notify us immediately.
> >>
> >>
> >> On Sun, Feb 2, 2014 at 2:55 PM, Dafna Ron <dron at redhat.com
> >> <mailto:dron at redhat.com>> wrote:
> >>
> >> please run vdsClient -s 0 getStorageDomainInfo
> >> a52938f7-2cf4-4771-acb2-0c78d14999e5
> >>
> >> Thanks,
> >>
> >> Dafna
> >>
> >>
> >>
> >> On 02/02/2014 03:02 PM, Steve Dainard wrote:
> >>
> >> Logs attached with VM running on qemu-kvm-rhev packages
> >> installed.
> >>
> >> *Steve Dainard *
> >> IT Infrastructure Manager
> >> Miovision <http://miovision.com/> | /Rethink Traffic/
> >> 519-513-2407 <tel:519-513-2407> ex.250
> >>
> >> 877-646-8476 <tel:877-646-8476> (toll-free)
> >>
> >> *Blog <http://miovision.com/blog> | **LinkedIn
> >> <https://www.linkedin.com/company/miovision-technologies> |
> >> Twitter <https://twitter.com/miovision> | Facebook
> >> <https://www.facebook.com/miovision>*
> >>
> >> ------------------------------------------------------------------------
> >> Miovision Technologies Inc. | 148 Manitou Drive, Suite 101,
> >> Kitchener, ON, Canada | N2C 1L3
> >> This e-mail may contain information that is privileged or
> >> confidential. If you are not the intended recipient, please
> >> delete the e-mail and any attachments and notify us immediately.
> >>
> >>
> >> On Sun, Feb 2, 2014 at 5:05 AM, Dafna Ron <dron at redhat.com
> >> <mailto:dron at redhat.com> <mailto:dron at redhat.com
> >> <mailto:dron at redhat.com>>> wrote:
> >>
> >> can you please upload full engine, vdsm, libvirt and vm's
> >> qemu logs?
> >>
> >>
> >> On 02/02/2014 02:08 AM, Steve Dainard wrote:
> >>
> >> I have two CentOS 6.5 Ovirt hosts (ovirt001, ovirt002)
> >>
> >> I've installed the applicable qemu-kvm-rhev packages
> >> from this
> >> site: http://www.dreyou.org/ovirt/vdsm32/Packages/ on
> >> ovirt002.
> >>
> >> On ovirt001 if I take a live snapshot:
> >>
> >> Snapshot 'test qemu-kvm' creation for VM
> >> 'snapshot-test' was
> >> initiated by admin at internal.
> >> The VM is paused
> >> Failed to create live snapshot 'test qemu-kvm' for VM
> >> 'snapshot-test'. VM restart is recommended.
> >> Failed to complete snapshot 'test qemu-kvm' creation
> >> for VM
> >> 'snapshot-test'.
> >> The VM is then started, and the status for the snapshot
> >> changes to OK.
> >>
> >> On ovirt002 (with the packages from dreyou) I don't
> >> get any
> >> messages about a snapshot failing, but my VM is still
> >> paused
> >> to complete the snapshot. Is there something else
> >> other than
> >> the qemu-kvm-rhev packages that would enable this
> >> functionality?
> >>
> >> I've looked for some information on when the packages
> >> would be
> >> built as required in the CentOS repos, but I don't see
> >> anything definitive.
> >>
> >>
> http://lists.ovirt.org/pipermail/users/2013-December/019126.html
> >> Looks like one of the maintainers is waiting for
> >> someone to
> >> tell him what flags need to be set.
> >>
> >> Also, another thread here:
> >> http://comments.gmane.org/gmane.comp.emulators.ovirt.arch/1618
> >> same maintainer, mentioning that he hasn't seen
> >> anything in
> >> the bug tracker.
> >>
> >> There is a bug here:
> >> https://bugzilla.redhat.com/show_bug.cgi?id=1009100 that seems
> >> to have ended in finding a way for qemu to expose
> >> whether it
> >> supports live snapshots, rather than figuring out how
> >> to get
> >> the CentOS team the info they need to build the
> >> packages with
> >> the proper flags set.
> >>
> >> I have bcc'd both dreyou (packaged the qemu-kvm-rhev
> >> packages
> >> listed above) and Russ (CentOS maintainer mentioned in
> >> the
> >> other threads) if they wish to chime in and perhaps
> >> collaborate on which flags, if any, should be set for
> the
> >> qemu-kvm builds so we can get a CentOS bug report
> >> going and
> >> hammer this out.
> >>
> >> Thanks everyone.
> >>
> >> **crosses fingers and hopes for live snapshots soon**
> >>
> >>
> >>
> >> *Steve Dainard *
> >> IT Infrastructure Manager
> >> Miovision <http://miovision.com/> | /Rethink Traffic/
> >> 519-513-2407 <tel:519-513-2407> <tel:519-513-2407
> >> <tel:519-513-2407>> <tel:519-513-2407 <tel:519-513-2407>
> >> <tel:519-513-2407 <tel:519-513-2407>>> ex.250
> >> 877-646-8476 <tel:877-646-8476> <tel:877-646-8476
> >> <tel:877-646-8476>> <tel:877-646-8476 <tel:877-646-8476>
> >>
> >> <tel:877-646-8476 <tel:877-646-8476>>> (toll-free)
> >>
> >> *Blog <http://miovision.com/blog> | **LinkedIn
> >>
> >> <https://www.linkedin.com/company/miovision-technologies> |
> >> Twitter <https://twitter.com/miovision> | Facebook
> >> <https://www.facebook.com/miovision>*
> >>
> >> ------------------------------------------------------------------------
> >>
> >>
> >> Miovision Technologies Inc. | 148 Manitou Drive, Suite
> >> 101,
> >> Kitchener, ON, Canada | N2C 1L3
> >> This e-mail may contain information that is privileged
> or
> >> confidential. If you are not the intended recipient,
> >> please
> >> delete the e-mail and any attachments and notify us
> >> immediately.
> >>
> >>
> >> On Fri, Jan 31, 2014 at 1:26 PM, Steve Dainard
> >> <sdainard at miovision.com
> >> <mailto:sdainard at miovision.com> <mailto:sdainard at miovision.com
> >> <mailto:sdainard at miovision.com>>
> >> <mailto:sdainard at miovision.com
> >> <mailto:sdainard at miovision.com>
> >>
> >> <mailto:sdainard at miovision.com
> >> <mailto:sdainard at miovision.com>>>> wrote:
> >>
> >>
> >> How would you developers, speaking for the
> >> oVirt-community,
> >> propose to
> >> solve this for CentOS _now_ ?
> >>
> >> I would imagine that the easiest way is that
> >> you build and
> >> host this one
> >> package(qemu-kvm-rhev), since you´ve basically
> >> already
> >> have
> >> the source
> >> and recipe (since you´re already providing it
> >> for RHEV
> >> anyway). Then,
> >> once that´s in place, it´s more a question of
> >> where to
> >> host the
> >> packages, in what repository. Be it your own,
> >> or some
> >> other
> >> repo set up
> >> for the SIG.
> >>
> >> This is my view, how I as a user view this
> issue.
> >>
> >>
> >>
> >> I think this is a pretty valid view.
> >>
> >> What would it take to get the correct qemu package
> >> hosted
> >> in the
> >> ovirt repo?
> >>
> >> --
> >>
> >> Med Vänliga Hälsningar
> >>
> >>
> >>
> -------------------------------------------------------------------------------
> >>
> >> Karli Sjöberg
> >> Swedish University of Agricultural Sciences
> >> Box 7079
> >> (Visiting
> >> Address
> >> Kronåsvägen 8)
> >> S-750 07 Uppsala, Sweden
> >> Phone: +46-(0)18-67 15 66
> >> <tel:%2B46-%280%2918-67%2015%2066>
> >> <tel:%2B46-%280%2918-67%2015%2066>
> >> <tel:%2B46-%280%2918-67%2015%2066>
> >> karli.sjoberg at slu.se <mailto:karli.sjoberg at slu.se>
> >> <mailto:karli.sjoberg at slu.se <mailto:karli.sjoberg at slu.se>>
> >> <mailto:karli.sjoberg at slu.se
> >> <mailto:karli.sjoberg at slu.se> <mailto:karli.sjoberg at slu.se
> >> <mailto:karli.sjoberg at slu.se>>>
> >>
> >> _______________________________________________
> >> Users mailing list
> >> Users at ovirt.org <mailto:Users at ovirt.org>
> >> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
> >> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
> >> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
> >>
> >> http://lists.ovirt.org/mailman/listinfo/users
> >>
> >>
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >> Users mailing list
> >> Users at ovirt.org <mailto:Users at ovirt.org>
> >> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
> >>
> >> http://lists.ovirt.org/mailman/listinfo/users
> >>
> >>
> >>
> >> -- Dafna Ron
> >>
> >>
> >>
> >>
> >> -- Dafna Ron
> >>
> >>
> >
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140203/fc18148f/attachment-0001.html>
More information about the Users
mailing list