[Users] networking: basic vlan help

[Robert Story]

On Thu, 23 Jan 2014 10:59:57 -0500 (EST) Assaf wrote:
AM> If you enable VLAN tagging on the management network, which is
AM> configured on eth0 (Which also provides internet access from my
AM> understanding) then you will connectivity as (I assume) your physical
AM> switches aren't configured for VLANs.

I'm assuming "will connectivity" should have been "will lose connectivity",
which is what I feared. I'm glad I asked!

AM> For an all-in-one, what I would suggest is the following procedure:

Excellent, I'll try that. Thanks!

My next question is for future planning. There is a second interface
(eth1) with a separate physical network which only contains the engine,
nodes and the nfs server. 

 +----------+
 | internet |-----|-----------|----------|
 +----------+ +--------+  +-------+  +-------+  < eth0
              | engine |  | node1 |  | node2 |
    +-----+   +--------+  +-------+  +-------+  < eth1
    | nfs |-------|-----------|----------|
    +-----+

Can the mgmt network be easily moved to eth1? Then the pubX would be
non-vlan on eth0, and mgmt + privY would be on eth1. If all the eth1
interfaces are connected to a dedicated/isolated switch, does that switch
need to explicitly support vlans, or does it matter?



Robert

--
Senior Software Engineer @ Parsons
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140123/cb8480ff/attachment.sig>