[Users] New user to oVirt, and I haz a sad so far...

[Einav Cohen]

go to the "Network Interface" sub-tab of that node and click the "Setup 
Host Networks" button. 
In the dialog that has opened, attach the 'ovirtmgmt' network from the 
right-hand side of the dialog to one of your node's NICs on the left-hand 
side by dragging that network onto the NIC.
click OK.
after a short while, your Host should become 'Up'.

----- Original Message -----
> From: "Willard Dennis" <willarddennis at live.com>
> To: "Einav Cohen" <ecohen at redhat.com>
> Cc: "noc" <noc at nieuwland.nl>, users at ovirt.org
> Sent: Friday, January 17, 2014 12:15:22 PM
> Subject: RE: [Users] New user to oVirt, and I haz a sad so far...
> 
> Aha!
> "Host <hostname> does not comply with the cluster Default networks, the
> following networks are missing on host: 'ovirtmgmt' "
>  
> What must I do to correct this? I do not remember reading about having to do
> something like this in the docs... Also, the node is on a different network
> that the engine, not sure if this matters or not (the two network do have
> connectivity to each other thru a router.)
>  
> Thanks,
> Will
>  
> > Date: Fri, 17 Jan 2014 12:10:50 -0500
> > From: ecohen at redhat.com
> > To: willarddennis at live.com
> > CC: noc at nieuwland.nl; users at ovirt.org
> > Subject: Re: [Users] New user to oVirt, and I haz a sad so far...
> > 
> > > ----- Original Message -----
> > > From: "Will Dennis (Live.com)" <willarddennis at live.com>
> > > Sent: Friday, January 17, 2014 11:55:55 AM
> > > 
> > > 
> > > 
> > > Thanks, Joop, for the node platform best practices… I did turn selinux
> > > from
> > > “enforcing” to “permissive”, and then when I tried to ping the engine by
> > > fqdn, I saw that DNS lookups were failing (even tho resolv.conf looked
> > > correct…) Did a ‘yum remove NetworkManager” and then fixed the
> > > /etc/sysconfig/network-scripts/ifcfg-<nic>, and then after a reboot, I
> > > can
> > > now see the info for the node in the WUI on the manager, although the
> > > status
> > > for the node is still “Non Operational”…
> > 
> > In the GUI, within the "Events" sub-tab of that node, there should be an
> > error
> > message detailing the reason for that node being in the Non-Operational
> > state;
> > what does this message say?
> > 
> > > 
> > > 
> > > 
> > > Where can I find the node install log (on the engine or the node, and
> > > name?)
> > > (Sorry for noob status, but I am a quick learner ;)
> > > 
> > > 
> > > 
> > > Thanks,
> > > 
> > > Will
> > > 
> > > 
> > > 
> > > 
> > > From: users-bounces at ovirt.org [mailto:users-bounces at ovirt.org] On Behalf
> > > Of
> > > noc
> > > Sent: Friday, January 17, 2014 3:35 AM
> > > To: users at ovirt.org
> > > Subject: Re: [Users] New user to oVirt, and I haz a sad so far...
> > > 
> > > 
> > > 
> > > 
> > > 
> > > On 17-1-2014 8:53, Gabi C wrote:
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 've been there! :-D
> > > 
> > > 
> > > I mean exactly same issuse you had on Centos, I had on Fedora 19.
> > > 
> > > 
> > > Did you disable selinux on nodes? 'cause that's what is causing SSh
> > > connection closing
> > > 
> > > 
> > > My setup:
> > > 
> > > 
> > > 1 engine on vmware - fedora 19, up-to-date
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 2 nodes on IBM x series 3650 - fedora 19 based -oVirt Node - 3.0.3 -
> > > 1.1.fc19
> > > with nodes beig in glusterfs cluster also.....
> > > 
> > > 
> > > 
> > > Right now, I'm banging my head against "Operation Add-Disk failed to
> > > complete." , message I have got after adding a new virtual machine and
> > > try
> > > to addd its disk
> > > 
> > > 
> > > 
> > > 
> > > 
> > > On Fri, Jan 17, 2014 at 6:08 AM, Will Dennis (Live.com) <
> > > willarddennis at live.com > wrote:
> > > 
> > > Hi all, ready for a story? (well, more of a rant, but hopefully it will
> > > be a
> > > good UX tale, and may even be entertaining.)
> > > 
> > > Had one of the groups come to me at work this week and request a
> > > OpenStack
> > > setup. When I sat down and discussed their needs, it turns out that they
> > > really only need a multi-hypervisor setup where they can spin up VMs for
> > > their research projects. The VMs should be fairly long-lived, and will
> > > have
> > > persistent storage. Their other request is that the storage should be
> > > local
> > > on the hypervisor nodes (they plan to use Intel servers with 8-10 2TB
> > > drives
> > > for VM storage on each node.) They desire this in order to keep the VM
> > > I/O
> > > local - they do not have a SAN of any sort anyhow, and they do not care
> > > about live migration, etc
> > > 
> > > 
> > > @Will
> > > If the installation ends, either with or without error, it will give you
> > > a
> > > log location. Upload the log to a paste.bin and mail the link.
> > > 
> > > @Gabi,
> > > There should be more info in either the vdsm.log on the SPM server or in
> > > the
> > > engine.log on the engine server, see above for lettings us know what the
> > > error is.
> > > 
> > > Having installed oVirt, probably dozens of times, I have some guidelines:
> > > - temporarily disable firewalld/iptables (if all works, enable should
> > > still
> > > work, scripts with rules are generated and location is given)
> > > - make selinux permissive either via setenforce 0 (until next boot) or
> > > via
> > > /etc/selinux/config ( survives reboots), dont disable it!
> > > - make sure fqdn work in both directions between engine and host(s)
> > > (either
> > > using /etc/hosts or DNS)
> > > - make sure NetworkManager is disabled and network enabled
> > > 
> > > Joop
> > > 
> > > _______________________________________________
> > > Users mailing list
> > > Users at ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> > > 
>