[ovirt-users] Network Question

[Antoni Segura Puimedon]

----- Original Message -----
> From: "Punit Dambiwal" <hypunit at gmail.com>
> To: "Sahina Bose" <sabose at redhat.com>
> Cc: "Dan Kenigsberg" <danken at redhat.com>, barumuga at redhat.com, users at ovirt.org, "Itamar Heim" <iheim at redhat.com>,
> "Michal Skrivanek" <michal.skrivanek at redhat.com>, "Antoni Segura Puimedon" <asegurap at redhat.com>, "Sven Kieske"
> <S.Kieske at mittwald.de>, "Frantisek Kobzik" <fkobzik at redhat.com>, ahadas at redhat.com
> Sent: Wednesday, July 30, 2014 10:46:47 AM
> Subject: Re: Network Question
> 
> Hi All,
> 
> I am using the storage ip to mount the glusterfs to host...that means the
> data communication should be run on this network but it's not....it's
> running on the ovirtmgmt network...

Could you please attach the ip addresses of the gluster nodes, and the
result of doing:

(on the vdsm host)

ip rule show
ip route show table (add here each of the tables that show up in the previous
command)

> 
> [image: Inline image 1]
> 
> 
> 
> On Wed, Jul 30, 2014 at 4:26 PM, Sahina Bose <sabose at redhat.com> wrote:
> 
> >
> > On 07/30/2014 01:21 PM, Dan Kenigsberg wrote:
> >
> >> On Wed, Jul 30, 2014 at 01:04:48PM +0800, Punit Dambiwal wrote:
> >>
> >>> Hi,
> >>>
> >>> I am facing one strange problem with Ovirt network...i have the below
> >>> network in my ovirt cluster :-
> >>>
> >>> eth0+eth1=bond0
> >>>
> >>> bond0.10= ovirtmgmt (43.250.X.X)
> >>> bond0.37= VMnetwork
> >>>
> >>> eth2+eth3=bond1 (Storage) (10.10.10.X)
> >>>
> >>> Glusterfs running on 4 HV's with each have 2 bricks...
> >>>
> >>> But still the glusterfs data transfer from ovirtmgmt network instead of
> >>> storage network ?? Is there any more setting required to change it to
> >>> ovirtmgmt to storage ??
> >>>
> >> The title "Storage" means nothing to oVirt per se. The user needs to make
> >> sure
> >> that her NFS or iSCSI storage server uses the specific network.
> >> But unfortunately - and Bala is welcome to correct me if I'm wrong - there
> >> is no means to set the IP address which gluster uses via oVirt.
> >>
> >> Can it be done "underneath" oVirt?
> >>
> >
> > For glusterd communication - that is gluster peer to gluster peer -
> > there's a workaround to achieve this..Please see http://lists.ovirt.org/
> > pipermail/users/2014-February/021213.html
> >
> > For VM to gluster host, the host IP used to mount the volume is the one
> > used for communication by oVirt.
> >
> >
> >
> >
>