[ovirt-users] Network Question
Antoni Segura Puimedon
asegurap at redhat.com
Wed Jul 30 06:17:34 EDT 2014
----- Original Message -----
> From: "Punit Dambiwal" <hypunit at gmail.com>
> To: "Antoni Segura Puimedon" <asegurap at redhat.com>
> Cc: "Sahina Bose" <sabose at redhat.com>, "Dan Kenigsberg" <danken at redhat.com>, barumuga at redhat.com, users at ovirt.org,
> "Itamar Heim" <iheim at redhat.com>, "Michal Skrivanek" <michal.skrivanek at redhat.com>, "Sven Kieske"
> <S.Kieske at mittwald.de>, "Frantisek Kobzik" <fkobzik at redhat.com>, ahadas at redhat.com
> Sent: Wednesday, July 30, 2014 12:11:30 PM
> Subject: Re: Network Question
>
> Hi Antoni,
>
> Please find the attached..for the network settings..
Shouldn't the bricks and all gluster be on the same subnet as storage?
Otherwise it is going to use the link scoped route of ovirtmgmt that is
on the same subnet as them.
>
>
> On Wed, Jul 30, 2014 at 5:42 PM, Antoni Segura Puimedon <asegurap at redhat.com
> > wrote:
>
> >
> >
> > ----- Original Message -----
> > > From: "Punit Dambiwal" <hypunit at gmail.com>
> > > To: "Antoni Segura Puimedon" <asegurap at redhat.com>
> > > Cc: "Sahina Bose" <sabose at redhat.com>, "Dan Kenigsberg" <
> > danken at redhat.com>, barumuga at redhat.com, users at ovirt.org,
> > > "Itamar Heim" <iheim at redhat.com>, "Michal Skrivanek" <
> > michal.skrivanek at redhat.com>, "Sven Kieske"
> > > <S.Kieske at mittwald.de>, "Frantisek Kobzik" <fkobzik at redhat.com>,
> > ahadas at redhat.com
> > > Sent: Wednesday, July 30, 2014 11:35:28 AM
> > > Subject: Re: Network Question
> > >
> > > Hi Antoni,
> > >
> > > Please find the attached screen shots...
> >
> > From what I see in the screen shots,
> >
> > The ip rules and routes say that communication to the
> > 43.25.76.0/24 should go via bond0.10 which is for the ovirtmgmt device.
> > That's why it happens.
> >
> > How did you setup the two networks? Are they on the same subnet?
> >
> > >
> > > Thanks,
> > > Punit
> > >
> > >
> > > On Wed, Jul 30, 2014 at 5:19 PM, Antoni Segura Puimedon <
> > asegurap at redhat.com
> > > > wrote:
> > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > > From: "Punit Dambiwal" <hypunit at gmail.com>
> > > > > To: "Sahina Bose" <sabose at redhat.com>
> > > > > Cc: "Dan Kenigsberg" <danken at redhat.com>, barumuga at redhat.com,
> > > > users at ovirt.org, "Itamar Heim" <iheim at redhat.com>,
> > > > > "Michal Skrivanek" <michal.skrivanek at redhat.com>, "Antoni Segura
> > > > Puimedon" <asegurap at redhat.com>, "Sven Kieske"
> > > > > <S.Kieske at mittwald.de>, "Frantisek Kobzik" <fkobzik at redhat.com>,
> > > > ahadas at redhat.com
> > > > > Sent: Wednesday, July 30, 2014 10:46:47 AM
> > > > > Subject: Re: Network Question
> > > > >
> > > > > Hi All,
> > > > >
> > > > > I am using the storage ip to mount the glusterfs to host...that
> > means the
> > > > > data communication should be run on this network but it's not....it's
> > > > > running on the ovirtmgmt network...
> > > >
> > > > Could you please attach the ip addresses of the gluster nodes, and the
> > > > result of doing:
> > > >
> > > > (on the vdsm host)
> > > >
> > > > ip rule show
> > > > ip route show table (add here each of the tables that show up in the
> > > > previous
> > > > command)
> > > >
> > > > >
> > > > > [image: Inline image 1]
> > > > >
> > > > >
> > > > >
> > > > > On Wed, Jul 30, 2014 at 4:26 PM, Sahina Bose <sabose at redhat.com>
> > wrote:
> > > > >
> > > > > >
> > > > > > On 07/30/2014 01:21 PM, Dan Kenigsberg wrote:
> > > > > >
> > > > > >> On Wed, Jul 30, 2014 at 01:04:48PM +0800, Punit Dambiwal wrote:
> > > > > >>
> > > > > >>> Hi,
> > > > > >>>
> > > > > >>> I am facing one strange problem with Ovirt network...i have the
> > below
> > > > > >>> network in my ovirt cluster :-
> > > > > >>>
> > > > > >>> eth0+eth1=bond0
> > > > > >>>
> > > > > >>> bond0.10= ovirtmgmt (43.250.X.X)
> > > > > >>> bond0.37= VMnetwork
> > > > > >>>
> > > > > >>> eth2+eth3=bond1 (Storage) (10.10.10.X)
> > > > > >>>
> > > > > >>> Glusterfs running on 4 HV's with each have 2 bricks...
> > > > > >>>
> > > > > >>> But still the glusterfs data transfer from ovirtmgmt network
> > instead
> > > > of
> > > > > >>> storage network ?? Is there any more setting required to change
> > it to
> > > > > >>> ovirtmgmt to storage ??
> > > > > >>>
> > > > > >> The title "Storage" means nothing to oVirt per se. The user needs
> > to
> > > > make
> > > > > >> sure
> > > > > >> that her NFS or iSCSI storage server uses the specific network.
> > > > > >> But unfortunately - and Bala is welcome to correct me if I'm
> > wrong -
> > > > there
> > > > > >> is no means to set the IP address which gluster uses via oVirt.
> > > > > >>
> > > > > >> Can it be done "underneath" oVirt?
> > > > > >>
> > > > > >
> > > > > > For glusterd communication - that is gluster peer to gluster peer -
> > > > > > there's a workaround to achieve this..Please see
> > > > http://lists.ovirt.org/
> > > > > > pipermail/users/2014-February/021213.html
> > > > > >
> > > > > > For VM to gluster host, the host IP used to mount the volume is
> > the one
> > > > > > used for communication by oVirt.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
More information about the Users
mailing list