[ovirt-users] novnc error
Frantisek Kobzik
fkobzik at redhat.com
Fri Jun 13 12:10:38 UTC 2014
Hi Garrett,
just a question about accessing the engine via the browser: do you access engine via the fqdn you typed in in the engine-setup? For instance, if you issue the certificates for 'mycompany.com' and use let's say ip address in the browser, websockify won't work...
Cheers,
Franta
----- Original Message -----
From: "Garrett Baltezegar" <my91rt at gmail.com>
To: "Alon Bar-Lev" <alonbl at redhat.com>
Cc: users at ovirt.org
Sent: Thursday, June 12, 2014 11:50:30 PM
Subject: Re: [ovirt-users] novnc error
Python-websockify - 0.5.1-1.e16.no arch
Numpy isn't installed
On Jun 12, 2014 5:15 PM, "Alon Bar-Lev" < alonbl at redhat.com > wrote:
----- Original Message -----
> From: "Garrett Baltezegar" < my91rt at gmail.com >
> To: "Alon Bar-Lev" < alonbl at redhat.com >
> Cc: users at ovirt.org
> Sent: Friday, June 13, 2014 12:12:28 AM
> Subject: Re: [ovirt-users] novnc error
>
> I've checked /var/log/messages a few times, but it doesn't seem like much
> is being written to it; the last entry I have is from ~6 hours ago.
>
> When running
> "/usr/share/ovirt-engine/services/ovirt-websocket-proxy/ovirt-websocket-proxy.py
> --debug start" I see the following information as the service is starting:
>
> WARNING: no 'numpy' module, HyBi protocol will be slower
> ovirt-websocket-proxy[14511] DEBUG _daemon:403 daemon entry pid=14511
> ovirt-websocket-proxy[14511] DEBUG _daemon:404 background=False
> ovirt-websocket-proxy[14511] DEBUG loadFile:70 loading config
> '/usr/share/ovirt-
> engine/services/ovirt-websocket-proxy/ovirt-websocket-proxy.conf'
> ovirt-websocket-proxy[14511] DEBUG loadFile:70 loading config
> '/etc/ovirt-engine
> /ovirt-websocket-proxy.conf.d/10-setup.conf'
> ovirt-websocket-proxy[14511] DEBUG _daemon:440 I am a daemon 14511
> ovirt-websocket-proxy[14511] DEBUG _setLimits:377 Setting rlimits
> WebSocket server settings:
> - Listen on *:6100
> - Flash security policy server
> - SSL/TLS support
> - Deny non-SSL/TLS connections
> - proxying from *:6100 to targets in /dummy
>
>
>
> I see the following info after I attempted a novnc connection through the
> browser:
>
> 1: 10.255.239.1 : new handler Process
> 1: handler exception: WSRequestHandler instance has no attribute 'last_code'
> 1: Traceback (most recent call last):
> File "/usr/lib/python2.6/site-packages/websockify/websocket.py", line 696,
> in top_new_client
> self.client = self.do_handshake(startsock, address)
> File "/usr/lib/python2.6/site-packages/websockify/websocket.py", line 628,
> in do_handshake
> if wsh.last_code == 101:
> AttributeError: WSRequestHandler instance has no attribute 'last_code'
>
>
What version of python-websockify do you have?
What version of numpy do you have (if any)?
> Thanks!
>
>
> On Thu, Jun 12, 2014 at 4:56 PM, Alon Bar-Lev < alonbl at redhat.com > wrote:
>
> >
> >
> > ----- Original Message -----
> > > From: "Garrett Baltezegar" < my91rt at gmail.com >
> > > To: "Alon Bar-Lev" < alonbl at redhat.com >
> > > Cc: users at ovirt.org
> > > Sent: Thursday, June 12, 2014 11:49:50 PM
> > > Subject: Re: [ovirt-users] novnc error
> > >
> > > It looks like a blank page loads. Just tried this in both Chrome and
> > > Internet Explorer, and got the same result.
> > >
> > > The proxy is installed locally on the ovirt server, by the way. Nmap
> > shows
> > > port 6100 TCP listening.
> >
> > do you see anything relevant at /var/log/messages?
> >
> > try to stop the ovirt-websocket-proxy service and run it in debug mode:
> >
> > # su - -s /bin/sh ovirt
> > $
> > /usr/share/ovirt-engine/services/ovirt-websocket-proxy/ovirt-websocket-proxy.py
> > --debug start
> >
> > see what you get.
> >
> > >
> > > Thanks for the quick response!
> > > On Jun 12, 2014 4:39 PM, "Alon Bar-Lev" < alonbl at redhat.com > wrote:
> > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > > From: "Garrett Baltezegar" < my91rt at gmail.com >
> > > > > To: users at ovirt.org
> > > > > Sent: Thursday, June 12, 2014 11:33:09 PM
> > > > > Subject: [ovirt-users] novnc error
> > > > >
> > > > > Hello everyone,
> > > > >
> > > > > I'm running into an error getting novnc up and running with ovirt,
> > and
> > > > I'm
> > > > > hoping someone can help.
> > > > >
> > > > > My system is a CentOS minimal x86_64 install running ovirt fine. I
> > have
> > > > > created VMs and I'm able to configure the console options. When I
> > > > attempt to
> > > > > connect to them, however, I get a Server disconnected (code: 1006)
> > error.
> > > > > I've searched online for a solution, but everything seems to point to
> > > > simply
> > > > > running the engine-setup configuration utility and installing the
> > > > ca.crt. I
> > > > > have tried both of these things, but I keep getting the same
> > message, in
> > > > > Internet Explorer, Chrome and Firefox.
> > > > >
> > > > > Disabled iptables and selinux.
> > > > > Connected directly to VM with VNC
> > > > > Checked ovirt-websocket-proxy, and it is running - haven't touched
> > config
> > > > > file - SSL=true
> > > > > Installed ca.crt - multiple times
> > > > > Reinstalled ovirt - clean first, the reinstall.
> > > > > Reinstalled ca.crt
> > > > >
> > > > > Nothing has helped so far. Does anyone have any ideas? I have a
> > > > > straight-forward setup using engine-setup; accepting the default
> > answer
> > > > most
> > > > > of the time. GlusterFS being one of the non-defaults.
> > > > >
> > > > > I appreciate your suggestions!
> > > >
> > > > What happens if you access port 6100 at engine machine?
> > > >
> > > > https://host:6100
> > > >
> > > > >
> > > > > GB
> > > > >
> > > > > _______________________________________________
> > > > > Users mailing list
> > > > > Users at ovirt.org
> > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > >
> > > >
> > >
> >
>
_______________________________________________
Users mailing list
Users at ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
More information about the Users
mailing list