[ovirt-users] Connection hickups with Pfsense and Carp

Matt . yamakasi.014 at gmail.com
Thu May 15 06:45:46 EDT 2014


OK, we are on the same line there.

The issue is that it doesn't work on this host, others do.

I have a 3.3 cluster and 3.4... both are enabled using the command... or
can't you have 2 versions ?


2014-05-15 12:43 GMT+02:00 Itamar Heim <iheim at redhat.com>:

> On 05/15/2014 06:42 AM, Matt . wrote:
>
>> OK, now I'm confused.
>>
>> For MacSpoofing we per default don't have the "macspoof" feature in the
>> engine am I right ?
>>
>> To get that... you need to set:
>>
>> engine-config -s EnableMACAntiSpoofingFilterRules=false --cver=3.X
>>
>> But no hook needs to be installed for this ? I don't have ping at the
>> momment with macspoof set on true on a VM.
>>
>>
> macspoofing is more than just promiscuous mode for port mirroring, which
> does require the hook to be installed (and the VM to be restarted)
>
>
>>
>>
>> 2014-05-15 12:35 GMT+02:00 Itamar Heim <iheim at redhat.com
>> <mailto:iheim at redhat.com>>:
>>
>>
>>     On 05/15/2014 04:26 AM, Matt . wrote:
>>
>>         Itamar,
>>
>>         On some testhost I'm updating now to 3.4(.x) I also need to
>>         install the
>>         hook it seems... it's not there by default.
>>
>>         Any idea why you thought it should be ?
>>
>>
>>     there is no need for the hook for port mirroring. you can define a
>>     vnic profile with port mirroring via the engine and vdsm has this
>>     feature built-in.
>>
>>     if you need more than just port mirroring (say, port forwarding),
>>     then you still need the hook.
>>
>>
>>         Cheers,
>>
>>         Matt
>>
>>
>>         2014-05-12 14:55 GMT+02:00 Matt . <yamakasi.014 at gmail.com
>>         <mailto:yamakasi.014 at gmail.com>
>>         <mailto:yamakasi.014 at gmail.com <mailto:yamakasi.014 at gmail.com
>> >__>>:
>>
>>
>>              Hi,
>>
>>              I really needed to enable the hook... Will investigate on
>>         new hosts!
>>
>>
>>              2014-05-11 22:37 GMT+02:00 Itamar Heim <iheim at redhat.com
>>         <mailto:iheim at redhat.com>
>>              <mailto:iheim at redhat.com <mailto:iheim at redhat.com>>>:
>>
>>
>>
>>                  On 04/17/2014 04:08 AM, Matt . wrote:
>>
>>                      Hi Guys,
>>
>>                      I'm not able to write a howto yet as we need to
>>         check how
>>                      this is
>>                      running on high traffic and we are going soon.
>>         Than, we need
>>                      to test
>>                      some other functions before I can actually write
>>         something down.
>>
>>                      Because this is not all documented well indeed I'm in
>>                      testmode and doing
>>                      some @ life system as reallife environments are
>> always
>>                      coming with other
>>                      things than your prefec test.
>>
>>                      I cannot say I needed promiscuouity, I did some
>>         things you would
>>                      normally do on pfsense which fixed that part. Some
>> old
>>                      message you
>>                      really need to discard instead of clicking it away
>> was
>>                      confusing this test.
>>
>>
>>
>>                  you are not supposed to need the promiscious hook for
>>                  sniffing/mirroring - that's by now part of engine/vdsm
>>         (at vnic
>>                  level in earlier versions, and at network profile in
>> later
>>                  versions iirc)
>>
>>
>>
>>                      2014-04-17 9:08 GMT+02:00 Dan Kenigsberg
>>         <danken at redhat.com <mailto:danken at redhat.com>
>>                      <mailto:danken at redhat.com <mailto:danken at redhat.com
>> >>
>>                      <mailto:danken at redhat.com
>>         <mailto:danken at redhat.com> <mailto:danken at redhat.com
>>         <mailto:danken at redhat.com>>>>:
>>
>>
>>
>>                           On Thu, Apr 17, 2014 at 01:11:13AM +0200, Matt
>>         . wrote:
>>                            > OK, also this is finetuned, but it would be
>>         nice to
>>                      have some
>>                           more info
>>                            > about the hooks in these cases... it's
>>         interesting
>>                      as oVirt has
>>                           the right
>>                            > settings to start with but we need to know
>>         what we
>>                      need to set
>>                           when we have
>>                            > a setup like this for an example.
>>
>>                           Could you explain what you have done, and what
>>         do you
>>                      need promiscuouity
>>                           for? oVirt has "port mirroring" that allows to
>>         mirror
>>                      ip traffic from
>>                           one vm network to another.
>>
>>                            >
>>                            >
>>                            > 2014-04-17 0:35 GMT+02:00 Matt .
>>                      <yamakasi.014 at gmail.com
>>         <mailto:yamakasi.014 at gmail.com> <mailto:yamakasi.014 at gmail.com
>>         <mailto:yamakasi.014 at gmail.com>__>
>>                           <mailto:yamakasi.014 at gmail.com
>>         <mailto:yamakasi.014 at gmail.com>
>>                      <mailto:yamakasi.014 at gmail.com
>>         <mailto:yamakasi.014 at gmail.com>__>__>>:
>>
>>
>>
>>                            >
>>                            > > Traffic issues are solved, but the
>>         advertising in
>>                      not that well.
>>                            > >
>>                            > > I see on ESXi (vSphere) that you need to
>>         enable
>>                      "Promiscuous
>>                           Mode", but
>>                            > > how on oVirt ?
>>                            > >
>>                            > >
>>         http://www.blissfulidiot.com/____2013/11/using-carp-with-___
>> _vmware-esxi.html
>>         <http://www.blissfulidiot.com/__2013/11/using-carp-with-__
>> vmware-esxi.html>
>>
>>
>>
>>         <http://www.blissfulidiot.com/__2013/11/using-carp-with-__
>> vmware-esxi.html
>>         <http://www.blissfulidiot.com/2013/11/using-carp-with-
>> vmware-esxi.html>>
>>                            > >
>>                            > > Do I need the vdsm-hook-promisc for it ?
>>         as I need
>>                      to make real
>>                           settings
>>                            > > on a VM there I think the vswitch only
>>         needs the mode.
>>                            > >
>>                            > > Information is welcome!
>>
>>
>>
>>
>>                      ___________________________________________________
>>                      Users mailing list
>>         Users at ovirt.org <mailto:Users at ovirt.org> <mailto:Users at ovirt.org
>>         <mailto:Users at ovirt.org>>
>>         http://lists.ovirt.org/____mailman/listinfo/users
>>         <http://lists.ovirt.org/__mailman/listinfo/users>
>>                      <http://lists.ovirt.org/__mailman/listinfo/users
>>         <http://lists.ovirt.org/mailman/listinfo/users>>
>>
>>
>>
>>
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140515/2ff22010/attachment-0001.html>


More information about the Users mailing list