[ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)

[Federico Simoncelli]

----- Original Message -----
> From: "Federico Simoncelli" <fsimonce at redhat.com>
> To: "Ricardo Esteves" <ricardo.m.esteves at gmail.com>
> Cc: users at ovirt.org
> Sent: Wednesday, May 14, 2014 3:47:58 PM
> Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
> 
> ----- Original Message -----
> > From: "Ricardo Esteves" <ricardo.m.esteves at gmail.com>
> > To: "Federico Simoncelli" <fsimonce at redhat.com>
> > Cc: users at ovirt.org
> > Sent: Wednesday, May 14, 2014 1:45:53 AM
> > Subject: RE: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
> > 
> > In attachment follows the defaults and the modified versions of the nodes
> > files.
> 
> If selecting the relevant host in "Hosts" you see the bnx2i interface in the
> "Network Interfaces" subtab, then you can try to:

Sorry I just noticed that you mentioned in the subject that you're using
oVirt 3.2. What I suggested is available only since oVirt 3.4.

-- 
Federico

> 1. create a new network in the "Network" tab, "VM network" checkbox should
>    be disabled
> 2. select the relevant host in "Hosts" and use "Setup Host Networks" in the
>    "Network Interfaces" subtab
> 3. configure the bnx2i interface and assign it to the new network you just
>    created
> 4. in "iSCSI Multipathing" subtab of tab "Data Center" add a new entry where
>    you bind the iscsi connection to the new network you created
> 
> Ping me on IRC if you need more help. My nick is fsimonce on #ovirt
> 
> --
> Federico