[ovirt-users] Import FC Storage as iSCSI

Tue Nov 4 02:57:46 EST 2014

Hi.

I have managed to get my oVirt node running using oVirt Node Hypervisor 3.1.0_master-20140707.0. I hope this is not causing following issue, but this Is the only way for me to test 3.5.

When I try to import existing FC storage domain I get errors on Engine (see attached log).

Regards.

Raul
----- Original Message -----
> From: "Raul Laansoo" <raul.laansoo at bigbank.ee>
> To: "Maor Lipchuk" <mlipchuk at redhat.com>
> Sent: Monday, 27 October, 2014 11:29:40 AM
> Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> 
> I have set this to 3.4 because I still use ovirt-node-iso from oVirt 3.4. For
> some reason I can't set cluster compatibility to 3.4 and with cluster 3.5
> node installation fails. I will install node from 3.5 iso and try again.
> 
> ----- Original Message -----
> > From: "Maor Lipchuk" <mlipchuk at redhat.com>
> > To: "Raul Laansoo" <raul.laansoo at bigbank.ee>
> > Cc: "users" <users at ovirt.org>
> > Sent: Monday, 27 October, 2014 10:50:21 AM
> > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > 
> > Which Data Center version are you using to attach the Storage Domain to?
> > If the storage domain meta data indicates that it is already attached to
> > another Data Center (after DR for example). then you the attach of it will
> > only be supported for Data Center 3.5.
> > 
> > Regards,
> > Maor
> > 
> > ----- Original Message -----
> > > From: "Raul Laansoo" <raul.laansoo at bigbank.ee>
> > > To: "Maor Lipchuk" <mlipchuk at redhat.com>
> > > Cc: "users" <users at ovirt.org>
> > > Sent: Monday, October 27, 2014 10:07:18 AM
> > > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > 
> > > When I try to import existing FC storage domain, which consists of two
> > > NetAPP
> > > LUN-s cloned from NetAPP snapshots, I get:
> > > 
> > > Error while executing action Attach Storage Domain: The Domain is already
> > > used by another Data Center.
> > > In order to use it, detach it from the Data Center it is currently
> > > attached
> > > to.
> > > 
> > > Does this mean, that to import existing storage domain, it must be first
> > > (cleanly) detached?
> > > 
> > > Regards.
> > > 
> > > ----- Original Message -----
> > > > From: "Maor Lipchuk" <mlipchuk at redhat.com>
> > > > To: "Raul Laansoo" <raul.laansoo at bigbank.ee>
> > > > Cc: "users" <users at ovirt.org>
> > > > Sent: Monday, 27 October, 2014 9:26:50 AM
> > > > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > > 
> > > > 
> > > > 
> > > > 
> > > > 
> > > > ----- Original Message -----
> > > > > From: "Raul Laansoo" <raul.laansoo at bigbank.ee>
> > > > > To: "Maor Lipchuk" <mlipchuk at redhat.com>
> > > > > Cc: "users" <users at ovirt.org>
> > > > > Sent: Monday, October 27, 2014 8:43:31 AM
> > > > > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > > > 
> > > > > Hi.
> > > > > 
> > > > > Thank you for looking into this. Does this only affect the import or
> > > > > influences also the process of attaching storage domain to Data
> > > > > Center
> > > > > (you
> > > > > can't attach iSCSI Storage Domain to FC DC and vice versa?)
> > > > 
> > > > Hi Raul,
> > > > 
> > > > for now, the fix should include the ability to "switch" storage types
> > > > only
> > > > through the import process,and not through the attach process.
> > > > I think that the import process might be enough because you can always
> > > > remove
> > > > the Storage Domain and re-import it to the setup as another storage
> > > > type.
> > > > 
> > > > > If I understand
> > > > > correctly, the Data Center's storage type is set at the
> > > > > initialization
> > > > > time,
> > > > > when the first storage domain is attached and you can't change it
> > > > > afterwards. In previous versions you could clearly see the DC storage
> > > > > type,
> > > > > now it's not visible.
> > > > 
> > > > You are right, mixed type data center is a feature introduced in
> > > > version
> > > > 3.4
> > > > (see http://www.ovirt.org/Features/Mixed_Types_Data_Center),
> > > > There should be only two type of Data Center local and shared.
> > > > The import Storage Domain feature is supported only from version 3.5 so
> > > > it
> > > > can only be supported in mixed type Data Centers.
> > > > 
> > > > 
> > > > > 
> > > > > Regards.
> > > > > Raul
> > > > > 
> > > > > ----- Original Message -----
> > > > > > From: "Maor Lipchuk" <mlipchuk at redhat.com>
> > > > > > To: "Itamar Heim" <iheim at redhat.com>
> > > > > > Cc: "raul laansoo" <raul.laansoo at bigbank.ee>, "Vered Volansky"
> > > > > > <vered at redhat.com>, "users" <users at ovirt.org>
> > > > > > Sent: Monday, 27 October, 2014 2:16:14 AM
> > > > > > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > ----- Original Message -----
> > > > > > > From: "Itamar Heim" <iheim at redhat.com>
> > > > > > > To: "Maor Lipchuk" <mlipchuk at redhat.com>, "raul laansoo"
> > > > > > > <raul.laansoo at bigbank.ee>
> > > > > > > Cc: "Vered Volansky" <vered at redhat.com>, "users"
> > > > > > > <users at ovirt.org>
> > > > > > > Sent: Sunday, October 26, 2014 9:34:14 PM
> > > > > > > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > > > > > 
> > > > > > > On 10/26/2014 03:58 PM, Maor Lipchuk wrote:
> > > > > > > > Hi Raul,
> > > > > > > >
> > > > > > > > The storage domain type is determined from the Storage Domain
> > > > > > > > meta
> > > > > > > > data.
> > > > > > > > If your storage domain was previously an FC Storage Domain, the
> > > > > > > > import
> > > > > > > > process will read this from the meta data and import it as an
> > > > > > > > FC
> > > > > > > > Storage
> > > > > > > > Domain.
> > > > > > > >
> > > > > > > > This behavior should be changed so the storage type will be
> > > > > > > > determined
> > > > > > > > by
> > > > > > > > the user instead from the meta data,
> > > > > > > > I've opened a bug on this issue for 3.5,
> > > > > > > > https://bugzilla.redhat.com/1157240.
> > > > > > > 
> > > > > > > so i guess for now the metadata can be changed as a workaround?
> > > > > > 
> > > > > > I believe so,
> > > > > > I've tried now to import an existing iSCSI Storage Domain after
> > > > > > changing
> > > > > > its
> > > > > > meta data from ISCSI to FCP and it seems to work well, the Storage
> > > > > > was
> > > > > > imported as Fibre Channel.
> > > > > > 
> > > > > > > 
> > > > > > > >
> > > > > > > > Regards,
> > > > > > > > Maor
> > > > > > > >
> > > > > > > >
> > > > > > > > ----- Original Message -----
> > > > > > > > From: "Allon Mureinik" <amureini at redhat.com>
> > > > > > > > To: "Maor Lipchuk" <mlipchuk at redhat.com>
> > > > > > > > Cc: "Vered Volansky" <vered at redhat.com>, "users"
> > > > > > > > <users at ovirt.org>,
> > > > > > > > "Raul
> > > > > > > > Laansoo" <raul.laansoo at bigbank.ee>
> > > > > > > > Sent: Sunday, October 26, 2014 10:42:53 AM
> > > > > > > > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > > > > > >
> > > > > > > > Maor, does this ring in bells wrt importing a storage domain?
> > > > > > > >
> > > > > > > > ----- Original Message -----
> > > > > > > >> From: "Raul Laansoo" <raul.laansoo at bigbank.ee>
> > > > > > > >> To: "Vered Volansky" <vered at redhat.com>
> > > > > > > >> Cc: "users" <users at ovirt.org>
> > > > > > > >> Sent: Thursday, October 23, 2014 4:51:34 PM
> > > > > > > >> Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > > > > > >>
> > > > > > > >> Hi.
> > > > > > > >>
> > > > > > > >> I have done this because this is the only way to access iSCSI
> > > > > > > >> target.
> > > > > > > >> But
> > > > > > > >> after import it shows up as FC (the original storage domain
> > > > > > > >> type).
> > > > > > > >> Where
> > > > > > > >> does this information come from? I have DataCenter setup from
> > > > > > > >> about
> > > > > > > >> version
> > > > > > > >> ovirt-engine-3.3.2.
> > > > > > > >>
> > > > > > > >> Thank you.
> > > > > > > >>
> > > > > > > >> ----- Original Message -----
> > > > > > > >>> From: "Vered Volansky" <vered at redhat.com>
> > > > > > > >>> To: "Raul Laansoo" <raul.laansoo at bigbank.ee>
> > > > > > > >>> Cc: "users" <users at ovirt.org>
> > > > > > > >>> Sent: Thursday, 23 October, 2014 4:24:12 PM
> > > > > > > >>> Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > > > > > >>>
> > > > > > > >>>
> > > > > > > >>>
> > > > > > > >>> ----- Original Message -----
> > > > > > > >>>> From: "Raul Laansoo" <raul.laansoo at bigbank.ee>
> > > > > > > >>>> To: "users" <users at ovirt.org>
> > > > > > > >>>> Sent: Thursday, October 23, 2014 10:59:30 AM
> > > > > > > >>>> Subject: [ovirt-users] Import FC Storage as iSCSI
> > > > > > > >>>>
> > > > > > > >>>> Hello.
> > > > > > > >>>>
> > > > > > > >>>> I have created an FC Storage Domain and made snapshots of
> > > > > > > >>>> all
> > > > > > > >>>> LUNs
> > > > > > > >>>> on
> > > > > > > >>>> the
> > > > > > > >>>> SAN. Now I want to use those snapshots on another Data
> > > > > > > >>>> Center
> > > > > > > >>>> over
> > > > > > > >>>> iSCSI
> > > > > > > >>>> connection to test recovery. I can import the domain, but
> > > > > > > >>>> the
> > > > > > > >>>> domains
> > > > > > > >>>> Storage Type is FC and I can't attach it to host. Is it
> > > > > > > >>>> possible
> > > > > > > >>>> to
> > > > > > > >>>> change
> > > > > > > >>>> domain type to iSCSI or some other way to import storage
> > > > > > > >>>> domain.
> > > > > > > >>>
> > > > > > > >>> Just select iSCSI as thetype when you import it. This is the
> > > > > > > >>> type
> > > > > > > >>> of
> > > > > > > >>> the
> > > > > > > >>> new
> > > > > > > >>> domain.
> > > > > > > >>>
> > > > > > > >>> Vered
> > > > > > > >>>
> > > > > > > >>>>
> > > > > > > >>>> Thank you.
> > > > > > > >>>>
> > > > > > > >>>> Raul
> > > > > > > >>>> _______________________________________________
> > > > > > > >>>> Users mailing list
> > > > > > > >>>> Users at ovirt.org
> > > > > > > >>>> http://lists.ovirt.org/mailman/listinfo/users
> > > > > > > >>>>
> > > > > > > >>>
> > > > > > > >> _______________________________________________
> > > > > > > >> Users mailing list
> > > > > > > >> Users at ovirt.org
> > > > > > > >> http://lists.ovirt.org/mailman/listinfo/users
> > > > > > > >>
> > > > > > > > _______________________________________________
> > > > > > > > Users mailing list
> > > > > > > > Users at ovirt.org
> > > > > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > > > > >
> > > > > > > 
> > > > > > > 
> > > > > > 
> > > > > 
> > > > 
> > > 
> > 
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: engine.log
Type: text/x-log
Size: 14445 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20141104/21b46b6b/attachment-0001.bin>