[ovirt-users] USB redirect
Juan Jose
jj197005 at gmail.com
Mon Nov 24 07:04:44 EST 2014
Thank you very much David,
Now I have clear the issue.
Juanjo.
On Mon, Nov 24, 2014 at 12:19 PM, David Jaša <djasa at redhat.com> wrote:
> Hi Juan,
>
> Refer to this post, the state of affairs didn't chagne since then:
> http://lists.ovirt.org/pipermail/users/2013-May/014429.html
>
> David
>
>
> On Po, 2014-11-24 at 11:48 +0100, Juan Jose wrote:
> > Hello Lev and Michal and everybody,
> >
> >
> > My main question is:
> >
> > Is it necessary to install in Windows 7 client, no in the guest, the
> > usbclerk to be able to get USB pen drive into the VM from the Windows
> > 7 client?, in afirmative case, where can I get usbclerk?
> >
> >
> > Many thanks in advanced,
> >
> >
> > Juanjo.
> >
> >
> > On Sun, Nov 23, 2014 at 9:42 AM, Lev Veyde <lveyde at redhat.com> wrote:
> > Hi Michal,
> >
> > As far as I know there is no need to install something inside
> > VM for the Native USB redirection to function properly, thus
> > nothing related is included on the oVirt WGT ISO.
> >
> > The user/admin only needs to properly configure the VM for
> > Native USB redirection and install the Spice client.
> >
> > I forwarded the issue to the Spice team, they could properly
> > point to the issue.
> >
> > Thanks in advance,
> > Lev Veyde.
> >
> > ----- Original Message -----
> > From: "Michal Skrivanek" <michal.skrivanek at redhat.com>
> > To: "Juan Jose" <jj197005 at gmail.com>, "Lev Veyde"
> > <lveyde at redhat.com>
> > Cc: "users at ovirt.org List" <users at ovirt.org>
> > Sent: Friday, November 21, 2014 3:07:09 PM
> > Subject: Re: [ovirt-users] USB redirect
> >
> >
> > On Nov 13, 2014, at 12:00 , Juan Jose <jj197005 at gmail.com>
> > wrote:
> >
> > > Hello Michal and everybody,
> > >
> > > I'm sorry but I have downloaded ovirt-guest-tools from URL
> > you gave me but the driver usbredir is not there. Is it normal
> > or maybe it is in another resource?
> > >
> > > As the oVirt documentation says, when this driver is
> > installed a new USB windows service will be started in the
> > client, but after execute the ovirt-guest-tool setup and
> > finish the installation there is not any USB new service in my
> > Windows client.
> > >
> > > Is it possible that this usbredir driver is not in this ISO?
> >
> > adding Lev who builds the ISO…can you please check?
> >
> > Thanks,
> > michal
> >
> > >
> > > Many thanks in advanced,
> > >
> > > Juanjo.
> > >
> > > On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose
> > <jj197005 at gmail.com> wrote:
> > > Many thanks Michal,
> > >
> > > I will try it and I will try to upgrade my oVirt 3.4.
> > >
> > > Thanks again and best regards,
> > >
> > > Juanjo.
> > >
> > > On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek
> > <michal.skrivanek at redhat.com> wrote:
> > >
> > > On Nov 12, 2014, at 16:39 , Juan Jose <jj197005 at gmail.com>
> > wrote:
> > >
> > > > Hello Michal or everybody,
> > > >
> > > > Could you tell me where can I get or download
> > ovirt-guest-tool.iso?
> > >
> > > Hi,
> > > it's a regular part of the 3.5 release...
> > >
> > http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
> > > enjoy!:)
> > >
> > > Thanks,
> > > michal
> > >
> > > >
> > > > Many thanks in advanced,
> > > >
> > > > Juanjo.
> > > >
> > > >
> > > > On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek
> > <michal.skrivanek at redhat.com> wrote:
> > > >
> > > > On Nov 11, 2014, at 11:08 , Juan Jose <jj197005 at gmail.com>
> > wrote:
> > > >
> > > > > Thank you very much Michal, If I have checked Device
> > administrator in my Windows 7 VM and as you can see in the
> > attached image, the USB device is correctly installed. But
> > when I click "File" in remote-viewer "USB device selection"
> > appears in grey and I can't select any USB device.
> > > > >
> > > > > Is there any other requirement to be able redirect USB
> > devices?, Is it necessary to install usbclerk in Windows
> > clients to redirect USB to the Windows guest?
> > > >
> > > > usbredir drivers yes, you need them, they should be on the
> > guest tools iso
> > > >
> > > > Thanks,
> > > > michal
> > > >
> > > > >
> > > > > Many thanks in advanced,
> > > > >
> > > > > Juanjo.
> > > > >
> > > > > On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek
> > <michal.skrivanek at redhat.com> wrote:
> > > > >
> > > > > On Nov 10, 2014, at 17:54 , Juan Jose
> > <jj197005 at gmail.com> wrote:
> > > > >
> > > > > > Hello everybody,
> > > > > >
> > > > > > I have an oVirt 3.4 deployment and I have some
> > Windows 7 Enterprise 32 bits guests. I can't redirect USB from
> > a Windows 7 client. I'm using remote - viewer as console. Also
> > I have observed something wrong in my administration portal.
> > The oVirt documentation says that I have to select Native USB
> > mode in console properties in VM configuration
> > > > >
> > > > > yes, that's the only supported way
> > > > > you should see the USB controller in devices
> > > > >
> > > > > > but after select this mode, it doesn't remain. If I
> > check this value in console configuration again I can see
> > disabled, native mode value have been changed.
> > > > >
> > > > > there used to be such issue in 3.4..it is fixed in 3.5
> > already.
> > > > > It should be a UI problem only…
> > > > >
> > > > > Thanks,
> > > > > michal
> > > > >
> > > > > >
> > > > > > Is there someone have had this problem?, and how I can
> > solve it?, is it necessary to install in Windows clients us
> > clerk software?
> > > > > >
> > > > > > Many thanks in advanced.
> > > > > >
> > > > > > Juanjo.
> > > > > > _______________________________________________
> > > > > > Users mailing list
> > > > > > Users at ovirt.org
> > > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > >
> > > > >
> > > > > <DeviceAdministrator.png>
> > > >
> > > >
> > >
> > >
> > >
> >
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20141124/fbc1cd6f/attachment-0001.html>
More information about the Users
mailing list