[ovirt-users] CentOS 7 + oVirt 3.5 + OpenVPN

[Phil Daws]

User error.
----- Original Message -----
From: "Phil Daws" <uxbod at splatnix.net>
To: "users" <users at ovirt.org>
Sent: Saturday, 18 October, 2014 1:45:34 PM
Subject: [ovirt-users] CentOS 7 + oVirt 3.5 + OpenVPN

Hello:

have installed oVirt 3.5 VDSM on a CentOS 7 node and then OpenVPN.  The problem I have is that when I start OpenVPN I receive the message:

Oct 18 13:29:50 kvm01 openvpn[4159]: /usr/sbin/ip link set dev tun0 up mtu 1500
Oct 18 13:29:50 kvm01 openvpn[4159]: /usr/sbin/ip addr add dev tun0 192.168.124.200/25 broadcast 192.168.124.255
Oct 18 13:29:50 kvm01 openvpn[4159]: /usr/sbin/ip route add 192.168.0.0/16 via 192.168.124.1
Oct 18 13:29:50 kvm01 openvpn[4159]: ERROR: Linux route add command failed: external program exited with error status: 2

and if I run the route command manually:

[root at kvm01 sysconfig]# /usr/sbin/ip route add 192.168.0.0/16 via 192.168.124.1
RTNETLINK answers: No such process

It would appear the tunnel is up:

[root at kvm01 sysconfig]# ip add ls
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN 
    link/ether f2:c9:ce:e5:ac:32 brd ff:ff:ff:ff:ff:ff
3: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master ovirtmgmt state UP qlen 1000
    link/ether c8:1f:66:c4:2c:76 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::ca1f:66ff:fec4:2c76/64 scope link 
       valid_lft forever preferred_lft forever
4: em2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether c8:1f:66:c4:2c:77 brd ff:ff:ff:ff:ff:ff
6: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN 
    link/ether 46:af:6e:9a:1e:4b brd ff:ff:ff:ff:ff:ff
8: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether c8:1f:66:c4:2c:76 brd ff:ff:ff:ff:ff:ff
    inet XXX.XXX.XXX.XXX/23 brd 88.150.253.255 scope global ovirtmgmt
       valid_lft forever preferred_lft forever
    inet6 fe80::ca1f:66ff:fec4:2c76/64 scope link 
       valid_lft forever preferred_lft forever
10: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100
    link/none 
    inet 192.168.124.200/25 brd 192.168.124.255 scope global tun0
       valid_lft forever preferred_lft forever

Any thoughts as to why the route will not work ? Rationale for this approach is its a cloud server and wish to use a private network to reach the install VMs on that node.

Thanks, Phil

_______________________________________________
Users mailing list
Users at ovirt.org
http://lists.ovirt.org/mailman/listinfo/users