[ovirt-users] [ANN] oVirt 3.5 GA Releases
Arman Khalatyan
arm2arm at gmail.com
Mon Oct 20 08:08:22 EDT 2014
I did not play anything. I had before Ovirt 3.4.4 up and running.
After upgrade I got 2 problems:
1) disk profiles are empty
2) numa box by default is preferred- grayed.
a.
On Mon, Oct 20, 2014 at 1:42 PM, Itamar Heim <iheim at redhat.com> wrote:
> On 10/20/2014 05:56 AM, Arman Khalatyan wrote:
>
>> My bad!!
>> False Alarm.everything is working after some massaging:)
>> 1) start VM get error: error NUMA memory tuning in 'preferred' mode only
>> supports single node
>> 2) stop VM edit properties:
>> 2.a)- edit->host->Start Running on->specific host
>> 2.b)- edit->host->Migration options->do not allow migration
>> 2.c)- edit->host->ConfigureNuma->tune mode->interleave
>> Run VM and enjoy.
>>
>
> but did you play with the numa definition or this happened on its own as
> part of the upgrade?
>
> done!
>>
>>
>> On Mon, Oct 20, 2014 at 11:44 AM, Arman Khalatyan <arm2arm at gmail.com
>> <mailto:arm2arm at gmail.com>> wrote:
>>
>> My upgrade went well no problems.
>> Unfortuneatly I am not able to run any VM on Intel Hosts.
>> It throws an error: Exit message: internal error internal error NUMA
>> memory tuning in 'preferred' mode only supports single node.
>> I cannot edit numa menu it is disabled on the VM.
>> thanks,
>> Arman.
>>
>>
>> On Mon, Oct 20, 2014 at 10:50 AM, Sandro Bonazzola
>> <sbonazzo at redhat.com <mailto:sbonazzo at redhat.com>> wrote:
>>
>> Il 20/10/2014 10:13, Tiemen Ruiten ha scritto:
>> > Hello,
>> >
>> > Last week I upgraded to 3.5 and on the engine side everything
>> went absolutely fine. Now I'm wondering what to do about my hosts (full
>> CentOS 6
>> > installs). Is the upgrade something the engine takes care of
>> when I set the compatibility version to 3.5? Or should I install the
>> ovirt-release35 rpm
>> > and run yum update on all hosts?
>> >
>> > Should I expect impact on running VM's, eg. from restarting
>> vdsm?
>>
>>
>> Looks like we have a documentation gap here.
>> I tried to search the oVirt site for pointing you to a section
>> describing how to upgrade hosts but did not found one.
>>
>> I think that we need to finish
>> http://www.ovirt.org/DraftInstallationGuide
>> and probably prepare an upgrade guide too.
>>
>> You'll need to install the ovirt-release35 rpm on your hosts
>> since the engine is not able to add the new repository (yet?
>> maybe an RFE on this should
>> be filled for easing the upgrade process of the hosts).
>>
>> >
>> > On 20 October 2014 08:48, Sandro Bonazzola
>> <sbonazzo at redhat.com <mailto:sbonazzo at redhat.com>
>> <mailto:sbonazzo at redhat.com <mailto:sbonazzo at redhat.com>>> wrote:
>> >
>> > Il 19/10/2014 16:53, Daniel Helgenberger ha scritto:
>> > > Congratulations! Hope you could get your party.
>> > >
>> > > Sandro, as I know you always like to hear things like
>> this:
>> > > I just upgraded my oVirt 3.4.4 installation to 3.5 and
>> everything went
>> > > really well (apart from some package siging / deps; but
>> these are really
>> > > not your issues).
>> >
>> > I really like when someone report everything goes fine :-)
>> >
>> > >
>> > > Tomorrow I start checking out the new stuff.
>> > >
>> > > Thank you! I really appreciate the work you do.
>> > >
>> > > Daniel
>> > >
>> > > On 17.10.2014 14:46, Sandro Bonazzola wrote:
>> > >> The oVirt Project is pleased to announce the general
>> availability of its sixth formal release, oVirt 3.5, as of
>> October 17, 2014.
>> > >>
>> > >> oVirt is an open source alternative to VMware vSphere,
>> and provides an excellent KVM management interface for
>> multi-node virtualization. oVirt is
>> > >> available now for Fedora 19, Fedora 20, Red Hat
>> Enterprise Linux 6.5, and CentOS 6.5 (or similar) and allow you
>> to use Red Hat Enterprise Linux
>> > 7 and
>> > >> CentOS 7 too as node and for running Hosted Engine.
>> > >>
>> > >> New features include:
>> > >>
>> > >> Live Merge
>> > >> ----------
>> > >> If an image has one or more snapshots, oVirt 3.5's
>> merge command will combine the data of one volume into another.
>> Live merges can be performed
>> > with
>> > >> data is pulled from one snapshot into another
>> snapshot. The engine can merge multiple disks at the same time
>> and each merge can independently
>> > fail or
>> > >> succeed in each operation.
>> > >> Import Storage Domain
>> > >>
>> > >> This latest release expands oVirt's feature of
>> importing ISOs and exporting storage domains to expand support
>> for importing an existing data
>> > storage
>> > >> domain. Based on information stored in the storage
>> domain, oVirt can revive entities such as disks, virtual
>> machines, and templates in the setup of
>> > >> any data center to which the storage domain is attached.
>> > >>
>> > >>
>> > >> Advanced Foreman Integration
>> > >> ----------------------------
>> > >> oVirt 3.5 adds the capability to provision and add
>> hypervisors to oVirt from bare metal. Foreman is a complete
>> lifecycle management tool for
>> > physical
>> > >> and virtual servers. Through deep integration with
>> configuration management, DHCP, DNS, TFTP, and PXE-based
>> unattended installations, Foreman
>> > manages
>> > >> every stage of the lifecycle of your physical or
>> virtual servers. Integrating Foreman with oVirt helps add
>> hypervisor hosts managed by Foreman
>> > to the
>> > >> oVirt engine.
>> > >>
>> > >>
>> > >> Enhanced Authentication, Authorization and Accounting
>> Support
>> > >>
>> -------------------------------------------------------------
>> > >> A new architecture has been built for oVirt 3.5's
>> authentication, authorization and accounting (AAA) system. The
>> enhancements will provide a clear
>> > >> separation of authentication from authorization and
>> provide a developer API to develop custom extensions for
>> authentication and authorization.
>> > >>
>> > >>
>> > >> New PatternFly Interface
>> > >> ------------------------
>> > >> oVirt 3.5 will have a new look and feel, using
>> PatternFly, the open interface project. The new look and feel
>> aims to maintain the colors and spirit
>> > >> associated with oVirt, while updating it with a new,
>> modern, sleek, and minimal look. The minimal design allows
>> complex screens to look cleaner and
>> > >> airier, and lets the user focus on the data and the
>> tasks by removing all extraneous visual elements.
>> > >>
>> > >>
>> > >> Advanced Scheduling with Optaplanner
>> > >> ------------------------------------
>> > >> The Optaplanner is a new service that takes a snapshot
>> of a cluster (a list of hosts and VMs) and computes an optimized
>> VM-to-Host assignment
>> > >> solution. Optimization will is done on per Cluster
>> basis. The administrator can use this information as a hint to
>> tweak the cluster to better
>> > utilize
>> > >> resources.
>> > >>
>> > >>
>> > >>
>> > >> This release of oVirt also includes numerous bug
>> fixes. See the release notes [1] for a complete list of the new
>> features and bugs fixed.
>> > >>
>> > >> A new repository has been created and will be
>> automatically enabled by installing / upgrading ovirt-release35
>> package.
>> > >> See release notes page for further instructions about
>> install / upgrade.
>> > >>
>> > >> A new oVirt Live iso is also available [2] and a new
>> oVirt Node iso will be available soon.
>> > >>
>> > >> [1] http://www.ovirt.org/OVirt_3.5_Release_Notes
>> > >> [2]
>> http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-live-
>> el6-3.5.0.iso
>> > >>
>> > >
>> >
>> >
>> > --
>> > Sandro Bonazzola
>> > Better technology. Faster innovation. Powered by
>> community collaboration.
>> > See how it works at redhat.com <http://redhat.com>
>> <http://redhat.com>
>> > _______________________________________________
>> > Users mailing list
>> > Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>> > http://lists.ovirt.org/mailman/listinfo/users
>> >
>> >
>> >
>> >
>> > --
>> > Tiemen Ruiten
>> > Systems Engineer
>> > R&D Media
>>
>>
>> --
>> Sandro Bonazzola
>> Better technology. Faster innovation. Powered by community
>> collaboration.
>> See how it works at redhat.com <http://redhat.com>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org <mailto:Users at ovirt.org>
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20141020/7e6a2911/attachment-0001.html>
More information about the Users
mailing list