[ovirt-users] Fwd: Are there some general strategyhow to Iscsi strorage domain?
Karli Sjöberg
Karli.Sjoberg at slu.se
Thu Oct 23 05:34:06 EDT 2014
On Thu, 2014-10-23 at 11:09 +0200, Arman Khalatyan wrote:
> yes + 1xssd cache
>
>
> NAME STATE READ
> WRITE CKSUM
> tank ONLINE 0
> 0 0
> raidz2-0 ONLINE 0
> 0 0
> scsi-35000cca22be96bed ONLINE 0
> 0 0
> scsi-35000cca22bc5a20e ONLINE 0
> 0 0
> scsi-35000cca22bc515ee ONLINE 0
> 0 0
> ata-Hitachi_HUS724030ALE640_PK2A31PAG9VJXW ONLINE 0
> 0 0
> scsi-35000cca22bc1f9cf ONLINE 0
> 0 0
> scsi-35000cca22be68899 ONLINE 0
> 0 0
> scsi-35000cca22bc58e1b ONLINE 0
> 0 0
> scsi-35000cca22bc4dc6b ONLINE 0
> 0 0
> scsi-35000cca22bc394ee ONLINE 0
> 0 0
> scsi-35000cca22bc10d97 ONLINE 0
> 0 0
> scsi-35000cca22bc605d1 ONLINE 0
> 0 0
> scsi-35000cca22bc412bf ONLINE 0
> 0 0
> scsi-35000cca22bc3f9ad ONLINE 0
> 0 0
> scsi-35000cca22bc53004 ONLINE 0
> 0 0
> scsi-35000cca22bc5b8e2 ONLINE 0
> 0 0
> scsi-35000cca22bc3beb3 ONLINE 0
> 0 0
> cache
> sdc ONLINE 0
> 0 0
OK, two things:
1) Redo the pool layout into 2x8 disk radiz2
2) Add two really fast SSD's as mirrored log devices, like a pair of
200GB Intel DC S3700 e.g.
Do this and it may provide even better performance than the HW RAID.
But that depends on the specs of the rest of the HW; CPU and RAM mostly,
can never have enough RAM with ZFS;)
/K
>
>
>
> On Thu, Oct 23, 2014 at 10:57 AM, Karli Sjöberg <Karli.Sjoberg at slu.se>
> wrote:
> On Thu, 2014-10-23 at 10:11 +0200, Arman Khalatyan wrote:
> >
> > ---------- Forwarded message ----------
> > From: Arman Khalatyan <arm2arm at gmail.com>
> > Date: Thu, Oct 23, 2014 at 10:11 AM
> > Subject: Re: [ovirt-users] Are there some general
> strategyhow to Iscsi
> > strorage domain?
> > To: Trey Dockendorf <treydock at gmail.com>
> >
> >
> > Thank you Trey for sharing your setup.
> >
> > I have also one test system with zvol exported with iscsi
> over 10G.
> > Unfortunately the difference in performance of zfs over raid
> > controller is huge, particularly where VM running mysql. I
> did not try
> > HBAs yet, I have only LSI/Adaptec/Areca RaidControllers they
> dont have
> > IT mode. Maybe that can be the reason.
> >
> > For sure always one need to find the sweet edge between
> performance
> > and reliability.
> >
> > Just for comparison with yours I get on random IO:
> > zvol/16Disks/Raid2/tgtd/iscsi/10G-> on VM multiple rsync -
> > ~100-150MB/s, Same HW but disks with Areca RAID6 - 650MB/s
> stable
> > even more in some cases.
>
> Did you have separate log devices attached to the pool?
>
> The pool´s name was '16Disks'. Did you have 16 disks in one
> radiz2 vdev?
>
> /K
>
> >
> > The best performance I got on FDR iser->
> > 80% of bare metal performance: 1500MB/s but ovirt goes mad
> claiming
> > that Network and Disk devices are saturated. My VM goes time
> by time
> > to paused state.
> > It is due to that the Ovirt treating all ib devices as
> 10Gbit
> > cards(in terms of speed).:(
> >
> >
> >
> >
> >
> >
> > On Thu, Oct 23, 2014 at 8:30 AM, Trey Dockendorf
> <treydock at gmail.com>
> > wrote:
> > Not sure if it's a solution for you, but ZFS. My
> domains are
> > all ZFS (using ZFS on Linux in EL6.5) and my backup
> server
> > receives incremental snapshots from primary storage
> which
> > includes both NFS exports and iSCSI. ZFS makes
> creating block
> > devices for iSCSI very easy, and they are included
> in snapshot
> > replication. The replication is not HA but disaster
> recovery
> > and off site.
> >
> > I've hit 300MB/s using ZFS send over IPoIB on my DDR
> fabric,
> > which isn't amazing but not terrible for an old DDR
> fabric.
> >
> > ZFS is probably not an easy solution as requires
> rebuilding
> > your storage, but maybe for future use or other
> readers it
> > will give some useful ideas.
> >
> > - Trey
> >
> > On Oct 22, 2014 11:56 AM, "Arman Khalatyan"
> > <arm2arm at gmail.com> wrote:
> >
> > Hi,
> > I have 2x40TB domains each are exported with
> > iser/iscsi with ib and 10Gb interfaces.
> >
> > For sure they are RAID6 storage little bit
> save on
> > failure.
> > But I was wondered if any way to backup
> those domains.
> > particularly master one.
> >
> >
> > I was thinking somehow DRBD based
> replication, with
> > lvm snapshots etc. But it looks like
> overkill.
> >
> > Will be nice somehow to deploy replicated/HA
> Master
> > domain with ability to backp on tapes as
> well.
> >
> >
> > Any ideas are welcome.
> >
> > Thanks,
> >
> > Arman.
> >
> >
> >
> >
> _______________________________________________
> > Users mailing list
> > Users at ovirt.org
> >
> http://lists.ovirt.org/mailman/listinfo/users
> >
> >
> >
> >
> >
>
>
>
>
> --
>
> Med Vänliga Hälsningar
>
> -------------------------------------------------------------------------------
> Karli Sjöberg
> Swedish University of Agricultural Sciences Box 7079 (Visiting
> Address
> Kronåsvägen 8)
> S-750 07 Uppsala, Sweden
> Phone: +46-(0)18-67 15 66
> karli.sjoberg at slu.se
>
>
--
Med Vänliga Hälsningar
-------------------------------------------------------------------------------
Karli Sjöberg
Swedish University of Agricultural Sciences Box 7079 (Visiting Address
Kronåsvägen 8)
S-750 07 Uppsala, Sweden
Phone: +46-(0)18-67 15 66
karli.sjoberg at slu.se
More information about the Users
mailing list