[ovirt-users] VM => "No bootable device" on Centos 7 VDSM, 6.5 boots perfectly

[Matt .]

Tiemen,

Are you PXE booting or are it normal installs ?

Cheers,

Matt

2014-10-26 14:43 GMT+01:00 Matt . <yamakasi.014 at gmail.com>:
> Hi,
>
> Thanks for your reply!
>
> I think I just found out that it's a Firewall issue on CentOS 7. I
> have them normally off, but these were on as that should be setup
> right with ovirt.
>
> When I turn it off console seems to connect better and servers seem to
> be able to boot from
> their mounted disks over NFS.
>
> I will update the bugreport!
>
> Thanks again.
>
> Cheers,
>
> Matt
>
> 2014-10-26 14:34 GMT+01:00 Tiemen Ruiten <t.ruiten at rdmedia.com>:
>> I have two CentOS 7 hosts in a 3.5 cluster, working fine. My storage domain
>> is iSCSI and I have only one logical network, no VLAN tagging. There's one
>> Centos 7 VM running in there and two Windows Server 2012 R2. Haven't tried
>> Centos 6 yet.
>>
>> I have disabled firewalld, because otherwise the ovirt host installation
>> wouldn't complete.
>>
>> On 26 October 2014 02:14, Matt . <yamakasi.014 at gmail.com> wrote:
>>>
>>> HI,
>>>
>>> I'm still struggeling here with the 3.5 hosts on CentOS 7, no booting
>>> servers as there is no disk found and connecting to Spice takes around
>>> 30 seconds.
>>>
>>> FreeBSD VM's seem to boot without any issues, CentOS and Ubuntu don't
>>> as described above.
>>>
>>> The 3.4 hosts are still working perfectly on Centos 6.5 with the 3.5
>>> Engine.
>>>
>>> Any usecases on Centos 7 and 3.5 hosts ?
>>>
>>> Cheers,
>>>
>>> Matt
>>>
>>> 2014-10-20 16:46 GMT+02:00 Matt . <yamakasi.014 at gmail.com>:
>>> > I cannot find the docs atm, but even with a upgraded engine to 3.5, same
>>> > issue.
>>> >
>>> >
>>> > 2014-10-20 16:07 GMT+02:00 Daniel Helgenberger
>>> > <daniel.helgenberger at m-box.de>:
>>> >>
>>> >> On 20.10.2014 15:49, Matt . wrote:
>>> >>> Hi,
>>> >>>
>>> >>> Sorry, I forgot a reply to all.
>>> >>>
>>> >>> As far as I understood 3.4 is supported as host on 7.0.
>>> >> Can you point me to that documentation? As I understood it this was a
>>> >> feature of 3.5 (though I can mix this up with hosted engine).
>>> >>>  As I'm
>>> >>> deploying new hosts I thought this was nice, also as it fixes some
>>> >>> issues on networking at my side.
>>> >>>
>>> >>> So to be clear:
>>> >>>
>>> >>> ovirt 3.4.1
>>> >>>
>>> >>> Engine = CentOS 6.5
>>> >>> Hosts = CentOS 6.5
>>> >>> NewHosts = CentOS 7.0
>>> >>>
>>> >>> That is not mixed I thought.
>>> >>>
>>> >>> Cheers,
>>> >>>
>>> >>> Matt
>>> >>>
>>> >>
>>> >> --
>>> >> Daniel Helgenberger
>>> >> m box bewegtbild GmbH
>>> >>
>>> >> P: +49/30/2408781-22
>>> >> F: +49/30/2408781-10
>>> >>
>>> >> ACKERSTR. 19
>>> >> D-10115 BERLIN
>>> >>
>>> >>
>>> >> www.m-box.de  www.monkeymen.tv
>>> >>
>>> >> Geschäftsführer: Martin Retschitzegger / Michaela Göllner
>>> >> Handeslregister: Amtsgericht Charlottenburg / HRB 112767
>>> >>
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>>
>> --
>> Tiemen Ruiten
>> Systems Engineer
>> R&D Media