[ovirt-users] vdsmd start fails during unified_network_persistence_upgrade (was: AllInOne Installation ovirt3.5 on CentOS 6.5 fails)

[Antoni Segura Puimedon]

----- Original Message -----
> From: "Yedidyah Bar David" <didi at redhat.com>
> To: "Patrick Werner" <patrick.werner at hs-heilbronn.de>
> Cc: users at ovirt.org
> Sent: Wednesday, October 22, 2014 8:38:38 AM
> Subject: [ovirt-users] vdsmd start fails during unified_network_persistence_upgrade (was: AllInOne Installation
> ovirt3.5 on CentOS 6.5 fails)
> 
> ----- Patrick Werner <patrick.werner at hs-heilbronn.de> wrote:
> > Hi Didi,
> > 
> > vdsm.log is empty and not owned by root:
> > -rw-r--r-- 1 vdsm kvm 0 Oct 21 13:44 /var/log/vdsm/vdsm.log
> 
> OK, false alarm.
> 
> Your host-deploy log ([1], from your previous report) has:
> ================================================================================
> 2014-10-20 14:42:41 DEBUG otopi.plugins.otopi.services.rhel
> plugin.execute:861 execute-output: ('/sbin/service', 'vdsmd', 'start')
> stdout:
> Starting multipathd daemon: [  OK  ]
> Starting rpcbind: [  OK  ]
> Starting ntpd: [  OK  ]
> Starting wdmd: [  OK  ]
> Starting sanlock: [  OK  ]
> supervdsm start[  OK  ]
> Starting iscsid: [  OK  ]
> [  OK  ]
> vdsm: Running mkdirs
> vdsm: Running configure_coredump
> vdsm: Running configure_vdsm_logs
> vdsm: Running run_init_hooks
> vdsm: Running check_is_configured
> libvirt is already configured for vdsm
> vdsm: Running validate_configuration
> SUCCESS: ssl configured to true. No conflicts
> vdsm: Running prepare_transient_repository
> vdsm: Running syslog_available
> vdsm: Running nwfilter
> vdsm: Running dummybr
> vdsm: Running load_needed_modules
> vdsm: Running tune_system
> vdsm: Running test_space
> vdsm: Running test_lo
> vdsm: Running unified_network_persistence_upgrade
> vdsm: stopped during execute unified_network_persistence_upgrade task (task
> returned with error code 1).

Could you please do and report:

    find /var/lib/vdsm/persistence

    find /var/run/vdsm/netconf

    ip l

    virsh -r net

and maybe you can try, for good measure,

vdsm-tool restore-nets  # This will most likely show the exception that the initialization of the service hides.
> vdsm start[FAILED]
> 
> 2014-10-20 14:42:41 DEBUG otopi.plugins.otopi.services.rhel
> plugin.execute:866 execute-output: ('/sbin/service', 'vdsmd', 'start')
> stderr:
> initctl: Job is already running: libvirtd
> libvir: Network Filter Driver error : Network filter not found: no nwfilter
> with matching name 'vdsm-no-mac-spoofing'
> 
> ================================================================================
> 
> [1] ovirt-20141020144241-ex1.gecko.hs-heilbronn.de-2f64814a.log
> 
> > 
> > In order to identify when this empty log is created i just reinstalled
> > ovirt 3.5 AllInOne on a fresh installed Centos 6.5 as root user (the ls -l
> > /var/log/vdsm/vdsm.log* output from above is from the fresh install)
> > the empty vdsm log is created after the installation step:
> > yum install -y ovirt-engine-setup-plugin-allinone
> > 
> > Then i did the engine-setup step (Complete settings/log at the end of this
> > mail). Again with the error:
> > [ ERROR ] The VDSM host was found in a failed state. Please check engine
> > and bootstrap installation logs.
> > [WARNING] Local storage domain not added because the VDSM host was not up.
> > Please add it manually.
> 
> What happens if you manually try to start the vdsmd service on the host (not
> vm)?
> If it still fails with the above error, try to fix that first. Not sure what
> might
> cause this - perhaps non-standard network configuration or something like
> that.
> You might search other logs for relevant errors from the time you do that.
> Changed the subject to attract vdsm people's attention...
> --
> Didi
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>