[ovirt-users] hosted engine setup on second host fails
Jiri Moskovcak
jmoskovc at redhat.com
Wed Sep 24 03:40:42 EDT 2014
Hi,
it's getting a little too long, so please forgive the top post. The
engine emits the message "Host with the same address already exists."
only if you trying to add host with the same hostname it doesn't have
any connection to it's ID, so please check if your hosts have unique
hostnames (e.g. I ran into this when I didn't get hostname from dhcp and
both of my hosts were localhost.localdomain).
Regards,
Jirka
On 09/24/2014 07:59 AM, Yedidyah Bar David wrote:
> ----- Original Message -----
>> From: "Yedidyah Bar David" <didi at redhat.com>
>> To: "Itamar Heim" <iheim at redhat.com>
>> Cc: "Stefan Wendler" <stefan.wendler at tngtech.com>, users at ovirt.org
>> Sent: Wednesday, September 24, 2014 8:40:58 AM
>> Subject: Re: [ovirt-users] hosted engine setup on second host fails
>>
>> ----- Original Message -----
>>> From: "Itamar Heim" <iheim at redhat.com>
>>> To: "Stefan Wendler" <stefan.wendler at tngtech.com>
>>> Cc: "Yedidyah Bar David" <ybardavi at redhat.com>, users at ovirt.org
>>> Sent: Tuesday, September 23, 2014 7:07:12 PM
>>> Subject: Re: [ovirt-users] hosted engine setup on second host fails
>>>
>>>
>>> On Sep 23, 2014 7:03 PM, Stefan Wendler <stefan.wendler at tngtech.com> wrote:
>>>>
>>>> On 09/23/2014 17:01, Itamar Heim wrote:
>>>>> On 09/23/2014 05:17 PM, Stefan Wendler wrote:
>>>>>> On 09/22/2014 10:52, Stefan Wendler wrote:
>>>>>>> On 09/19/2014 15:58, Itamar Heim wrote:
>>>>>>>> On 09/19/2014 03:32 PM, Stefan Wendler wrote:
>>>>>>>>> Hi there.
>>>>>>>>>
>>>>>>>>> I'm trying to install a hosted-engine on our second node (fist
>>>>>>>>> engine
>>>>>>>>> runs on node1).
>>>>>>>>>
>>>>>>>>> But I always get the message:
>>>>>>>>>
>>>>>>>>> [ ERROR ] Cannot automatically add the host to the Default cluster:
>>>>>>>>> Cannot add Host. Host with the same address already exists.
>>>>>>>>>
>>>>>>>>> I'm not entirely sure what I have to do when this message comes, so
>>>>>>>>> I
>>>>>>>>> just press ENTER:
>>>>>>>>>
>>>>>>>>> #######
>>>>>>>>> To continue make a selection from the options below:
>>>>>>>>> (1) Continue setup - engine installation is complete
>>>>>>>>> (2) Power off and restart the VM
>>>>>>>>> (3) Abort setup
>>>>>>>>>
>>>>>>>>> (1, 2, 3)[1]:
>>>>>>>>> ########
>>>>>>>>>
>>>>>>>>> Is there any other interaction required prior to selecting "1"?
>>>>>>>>>
>>>>>>>>> In the Web Gui I get the following message:
>>>>>>>>>
>>>>>>>>> X Adding new Host hosted_engine_2 to Cluster Default
>>>>>>>>>
>>>>>>>>> Here is the console output:
>>>>>>>>>
>>>>>>>>> # hosted-engine --deploy
>>>>>>>>> [ INFO ] Stage: Initializing
>>>>>>>>> Continuing will configure this host for serving as
>>>>>>>>> hypervisor
>>>>>>>>> and create a VM where you have to install oVirt Engine afterwards.
>>>>>>>>> Are you sure you want to continue? (Yes, No)[Yes]:
>>>>>>>>> [ INFO ] Generating a temporary VNC password.
>>>>>>>>> [ INFO ] Stage: Environment setup
>>>>>>>>> Configuration files: []
>>>>>>>>> Log file:
>>>>>>>>> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140919141012-k2lag6.log
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Version: otopi-1.2.3 (otopi-1.2.3-1.el6)
>>>>>>>>> [ INFO ] Hardware supports virtualization
>>>>>>>>> [ INFO ] Bridge ovirtmgmt already created
>>>>>>>>> [ INFO ] Stage: Environment packages setup
>>>>>>>>> [ INFO ] Stage: Programs detection
>>>>>>>>> [ INFO ] Stage: Environment setup
>>>>>>>>> [ INFO ] Stage: Environment customization
>>>>>>>>>
>>>>>>>>> --== STORAGE CONFIGURATION ==--
>>>>>>>>>
>>>>>>>>> During customization use CTRL-D to abort.
>>>>>>>>> Please specify the storage you would like to use (nfs3,
>>>>>>>>> nfs4)[nfs3]:
>>>>>>>>> Please specify the full shared storage connection path
>>>>>>>>> to use
>>>>>>>>> (example: host:/path): <some address>:/volume1
>>>>>>>>> The specified storage location already contains a data
>>>>>>>>> domain.
>>>>>>>>> Is this an additional host setup (Yes, No)[Yes]?
>>>>>>>>> [ INFO ] Installing on additional host
>>>>>>>>> Please specify the Host ID [Must be integer, default:
>>>>>>>>> 2]:
>>>>>>>>> The Host ID is already known. Is this a re-deployment
>>>>>>>>> on an
>>>>>>>>> additional host that was previously set up (Yes, No)[Yes]?
>>
>> I admit I never tried that. Not sure how exactly it's supposed to work.
>
> A bit more details:
>
> Normally, a host is registered only in the engine's database. A hosted
> engine is additionally registered in a special hosted-engine metadata
> file managed by the ha daemon [1]. The question above appears if the host id
> is found in this metadata file. It seems we never check if it's already
> in the engine database - the assumption is that if an existing host is
> re-purposed as a hosted-engine, it should first be "uninstalled" - at least
> not be in use (no VMs) and removed from its cluster/dc/the engine.
>
> [1] http://www.ovirt.org/images/d/d5/Fosdem-hosted-engine.pdf pages 17-18
>
>>
>>>>>>>>>
>>>>>>>>> --== SYSTEM CONFIGURATION ==--
>>>>>>>>>
>>>>>>>>> [WARNING] A configuration file must be supplied to deploy Hosted
>>>>>>>>> Engine
>>>>>>>>> on an additional host.
>>>>>>>>> The answer file may be fetched from the first host
>>>>>>>>> using scp.
>>>>>>>>> If you do not want to download it automatically you can
>>>>>>>>> abort
>>>>>>>>> the setup answering no to the following question.
>>>>>>>>> Do you want to scp the answer file from the first host?
>>>>>>>>> (Yes,
>>>>>>>>> No)[Yes]:
>>>>>>>>> Please provide the FQDN or IP of the first host:
>>>>>>>>> <node1.domain>
>>>>>>>>> Enter 'root' user password for host <node1.domain>:
>>>>>>>>> [ INFO ] Answer file successfully downloaded
>>>>>>>>>
>>>>>>>>> --== NETWORK CONFIGURATION ==--
>>>>>>>>>
>>>>>>>>> The following CPU types are supported by this host:
>>>>>>>>> - model_Westmere: Intel Westmere Family
>>>>>>>>> - model_Nehalem: Intel Nehalem Family
>>>>>>>>> - model_Penryn: Intel Penryn Family
>>>>>>>>> - model_Conroe: Intel Conroe Family
>>>>>>>>>
>>>>>>>>> --== HOSTED ENGINE CONFIGURATION ==--
>>>>>>>>>
>>>>>>>>> Enter the name which will be used to identify this host
>>>>>>>>> inside
>>>>>>>>> the Administrator Portal [hosted_engine_2]:
>>>>>>>>> Enter 'admin at internal' user password that will be used
>>>>>>>>> for
>>>>>>>>> accessing the Administrator Portal:
>>>>>>>>> Confirm 'admin at internal' user password:
>>>>>>>>> [ INFO ] Stage: Setup validation
>>>>>>>>>
>>>>>>>>> --== CONFIGURATION PREVIEW ==--
>>>>>>>>>
>>>>>>>>> Engine FQDN : engine.domain
>>>>>>>>> Bridge name : ovirtmgmt
>>>>>>>>> SSH daemon port : 22
>>>>>>>>> Gateway address : <some address>
>>>>>>>>> Host name for web application : hosted_engine_2
>>>>>>>>> Host ID : 2
>>>>>>>>> Image size GB : 25
>>>>>>>>> Storage connection : <some
>>>>>>>>> address>:/volume1
>>>>>>>>> Console type : vnc
>>>>>>>>> Memory size MB : 8192
>>>>>>>>> MAC address : 00:16:3e:3b:8d:66
>>>>>>>>> Boot type : disk
>>>>>>>>> Number of CPUs : 2
>>>>>>>>> CPU Type : model_Westmere
>>>>>>>>>
>>>>>>>>> Please confirm installation settings (Yes, No)[No]: yes
>>>>>>>>> [ ERROR ] Invalid value
>>>>>>>>>
>>>>>>>>> Please confirm installation settings (Yes, No)[No]: Yes
>>>>>>>>> [ INFO ] Stage: Transaction setup
>>>>>>>>> [ INFO ] Stage: Misc configuration
>>>>>>>>> [ INFO ] Stage: Package installation
>>>>>>>>> [ INFO ] Stage: Misc configuration
>>>>>>>>> [ INFO ] Configuring libvirt
>>>>>>>>> [ INFO ] Configuring VDSM
>>>>>>>>> [ INFO ] Starting vdsmd
>>>>>>>>> [ INFO ] Waiting for VDSM hardware info
>>>>>>>>> [ INFO ] Waiting for VDSM hardware info
>>>>>>>>> [ INFO ] Connecting Storage Domain
>>>>>>>>> [ INFO ] Configuring VM
>>>>>>>>> [ INFO ] Updating hosted-engine configuration
>>>>>>>>> [ INFO ] Stage: Transaction commit
>>>>>>>>> [ INFO ] Stage: Closing up
>>>>>>>>> To continue make a selection from the options below:
>>>>>>>>> (1) Continue setup - engine installation is complete
>>>>>>>>> (2) Power off and restart the VM
>>>>>>>>> (3) Abort setup
>>>>>>>>>
>>>>>>>>> (1, 2, 3)[1]:
>>>>>>>>> [ INFO ] Engine replied: DB Up!Welcome to Health Status!
>>>>>>>>> [ ERROR ] Cannot automatically add the host to the Default cluster:
>>>>>>>>> Cannot add Host. Host with the same address already exists.
>>>>>>>>> [ INFO ] Waiting for the host to become operational in the engine.
>>>>>>>>> This
>>>>>>>>> may take several minutes...
>>>>>>>>> [ INFO ] Still waiting for VDSM host to become operational...
>>>>>>>>> [ INFO ] Still waiting for VDSM host to become operational...
>>>>>>>>>
>>>>>>>>> And the stacktrace from the logs:
>>>>>>>>>
>>>>>>>>> 2014-09-19 14:14:07 DEBUG
>>>>>>>>> otopi.plugins.ovirt_hosted_engine_setup.engine.add_host
>>>>>>>>> add_host._closeup:438 Cannot add the host to the Default cluster
>>>>>>>>> Traceback (most recent call last):
>>>>>>>>> File
>>>>>>>>> "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/engine/add_host.py",
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> line 432, in _closeup
>>>>>>>>> override_iptables=True,
>>>>>>>>> File
>>>>>>>>> "/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/brokers.py",
>>>>>>>>> line 9779, in add
>>>>>>>>> headers={"Expect":expect, "Correlation-Id":correlation_id}
>>>>>>>>> File
>>>>>>>>> "/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/proxy.py",
>>>>>>>>> line 88, in add
>>>>>>>>> return self.request('POST', url, body, headers)
>>>>>>>>> File
>>>>>>>>> "/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/proxy.py",
>>>>>>>>> line 118, in request
>>>>>>>>> persistent_auth=self._persistent_auth)
>>>>>>>>> File
>>>>>>>>> "/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/proxy.py",
>>>>>>>>> line 140, in __doRequest
>>>>>>>>> persistent_auth=persistent_auth
>>>>>>>>> File
>>>>>>>>> "/usr/lib/python2.6/site-packages/ovirtsdk/web/connection.py",
>>>>>>>>> line 134, in doRequest
>>>>>>>>> raise RequestError, response
>>>>>>>>> RequestError:
>>>>>>>>> status: 409
>>>>>>>>> reason: Conflict
>>>>>>>>> detail: Cannot add Host. Host with the same address already exists.
>>>>>>>>> 2014-09-19 14:14:07 ERROR
>>>>>>>>> otopi.plugins.ovirt_hosted_engine_setup.engine.add_host
>>>>>>>>> add_host._closeup:445 Cannot automatically add the host to the
>>>>>>>>> Default
>>>>>>>>> cluster:
>>>>>>>>> Cannot add Host. Host with the same address already exists.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Cheers,
>>>>>>>>> Stefan
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Users mailing list
>>>>>>>>> Users at ovirt.org
>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> what type of hardware is this? check the host uuid is not the same
>>>>>>>> on
>>>>>>>> both please.
>>>>>>>> http://lists.ovirt.org/pipermail/users/2014-September/027278.html
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> this is Supermicro Hardware. But the uuids differ. Anyway, I
>>>>>>> regenerated
>>>>>>> the uuid on node2. But I first have to fix another problem. After a
>>>>>>> reboot the first engine on node1 doesn't start because it says the
>>>>>>> storage path cannot be found. arrgh
>>>>>>>
>>>>>>> I will investigate this and report my findings.
>>>>>>>
>>>>>>> Cheers,
>>>>>>> Stefan
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> Users at ovirt.org
>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>
>>>>>> Well everything is up and running again but I still have the same
>>>>>> problem. I did a uuidgen > /etc/vdsm/vdsm.id on ovirt node 2 and 3
>>>>>> even
>>>>>> though the uuids were different already.
>>>>>>
>>>>>> What does ovirt mean by "Host with the same address already exists"?
>>>>>> What HOST is it referring to?
>>>>>>
>>>>>> Greetings,
>>>>>> Stefan
>>>>>>
>>>>>
>>>>> oh, not same uuid, rather same host name (like ip address or dns name
>>>>> used to access it)
>>>> it - is the engine or the ovirt-node? The nodes have definitely
>>>> different ip addresses and dns entries. This is verified.
>>>>
>>>> If it is the engine then I might have a problem understanding some
>>>> things I Basically want one engine that runs on each node, if needed.
>>>>
>>>> Cheers
>>>
>>> The hosts.
>>> Didi/Sandro?
>>
>> It will probably be simplest to remove the second (and third?) host
>> from then engine, then try again.
>> --
>> Didi
>>
>>
>
More information about the Users
mailing list