[ovirt-users] HA cluster

Simone Tiraboschi stirabos at redhat.com
Wed Dec 2 12:05:13 UTC 2015


On Wed, Dec 2, 2015 at 12:19 PM, Budur Nagaraju <nbudoor at gmail.com> wrote:

> I have installed KVM in the nested environment  in ESXi6.x version is that
> recommended ?
>

I often use KVM over KVM in nested environment but honestly I never tried
to run KVM over ESXi but I suspect that all of your issues comes from there.


> apart from Hosted engine is there any other alternate way to configure
> Engine HA cluster ?
>

Nothing else from the project. You can use two external VMs in cluster with
pacemaker but it's completely up to you.


>
>
> -Nagaraju
>
>
> On Wed, Dec 2, 2015 at 4:11 PM, Simone Tiraboschi <stirabos at redhat.com>
> wrote:
>
>>
>>
>> On Wed, Dec 2, 2015 at 11:25 AM, Budur Nagaraju <nbudoor at gmail.com>
>> wrote:
>>
>>> pls fine the logs from the below mentioned URL,
>>>
>>> http://pastebin.com/ZeKyyFbN
>>>
>>
>> OK, the issue is here:
>>
>> Thread-88::ERROR::2015-12-02
>> 15:06:27,735::vm::2358::vm.Vm::(_startUnderlyingVm)
>> vmId=`93db4369-285f-48bc-bc68-181d9de41a3c`::The vm start process failed
>> Traceback (most recent call last):
>>   File "/usr/share/vdsm/virt/vm.py", line 2298, in _startUnderlyingVm
>>     self._run()
>>   File "/usr/share/vdsm/virt/vm.py", line 3363, in _run
>>     self._connection.createXML(domxml, flags),
>>   File "/usr/lib/python2.6/site-packages/vdsm/libvirtconnection.py", line
>> 119, in wrapper
>>     ret = f(*args, **kwargs)
>>   File "/usr/lib64/python2.6/site-packages/libvirt.py", line 2709, in
>> createXML
>>     if ret is None:raise libvirtError('virDomainCreateXML() failed',
>> conn=self)
>> libvirtError: unsupported configuration: Domain requires KVM, but it is
>> not available. Check that virtualization is enabled in the host BIOS, and
>> host configuration is setup to load the kvm modules.
>> Thread-88::DEBUG::2015-12-02
>> 15:06:27,751::vm::2813::vm.Vm::(setDownStatus)
>> vmId=`93db4369-285f-48bc-bc68-181d9de41a3c`::Changed state to Down:
>> unsupported configuration: Domain requires KVM, but it is not available.
>> Check that virtualization is enabled in the host BIOS, and host
>> configuration is setup to load the kvm modules. (code=1)
>>
>> but it's pretty strange cause hosted-engine-setup already explicitly
>> check for visualization support and just exits with a clear error if not.
>> Did you played with the kvm module while hosted-engine-setup was running?
>>
>> Can you please hosted-engine-setup logs?
>>
>>
>>>
>>> On Fri, Nov 27, 2015 at 6:39 PM, Simone Tiraboschi <stirabos at redhat.com>
>>> wrote:
>>>
>>>>
>>>>
>>>> On Fri, Nov 27, 2015 at 12:42 PM, Maxim Kovgan <kovganm at gmail.com>
>>>> wrote:
>>>>
>>>>> Maybe even makes sense to open a bugzilla ticket already. Better safe
>>>>> than sorry.
>>>>>
>>>>
>>>> We still need at least one log file to understand what happened.
>>>>
>>>>
>>>>> On Nov 27, 2015 11:35 AM, "Simone Tiraboschi" <stirabos at redhat.com>
>>>>> wrote:
>>>>>
>>>>>>
>>>>>> On Fri, Nov 27, 2015 at 10:10 AM, Budur Nagaraju <nbudoor at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> I do not know what logs you are expecting ? the logs which I got is
>>>>>>> pasted in the mail if you require in pastebin let me know I will upload
>>>>>>> there .
>>>>>>>
>>>>>>
>>>>>>
>>>>>> Please run sosreport utility and share the resulting archive where
>>>>>> you prefer.
>>>>>> You can follow this guide:
>>>>>> http://www.linuxtechi.com/how-to-create-sosreport-in-linux/
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Nov 27, 2015 at 1:58 PM, Sandro Bonazzola <
>>>>>>> sbonazzo at redhat.com> wrote:
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, Nov 27, 2015 at 8:34 AM, Budur Nagaraju <nbudoor at gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> I got only 10lines to in the vdsm logs and are below ,
>>>>>>>>>
>>>>>>>>>
>>>>>>>> Can you please provide full sos report?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>> [root at he /]# tail -f /var/log/vdsm/vdsm.log
>>>>>>>>> Thread-100::DEBUG::2015-11-27
>>>>>>>>> 12:58:57,360::resourceManager::616::Storage.ResourceManager::(releaseResource)
>>>>>>>>> Trying to release resource 'Storage.HsmDomainMonitorLock'
>>>>>>>>> Thread-100::DEBUG::2015-11-27
>>>>>>>>> 12:58:57,360::resourceManager::635::Storage.ResourceManager::(releaseResource)
>>>>>>>>> Released resource 'Storage.HsmDomainMonitorLock' (0 active users)
>>>>>>>>> Thread-100::DEBUG::2015-11-27
>>>>>>>>> 12:58:57,360::resourceManager::641::Storage.ResourceManager::(releaseResource)
>>>>>>>>> Resource 'Storage.HsmDomainMonitorLock' is free, finding out if anyone is
>>>>>>>>> waiting for it.
>>>>>>>>> Thread-100::DEBUG::2015-11-27
>>>>>>>>> 12:58:57,360::resourceManager::649::Storage.ResourceManager::(releaseResource)
>>>>>>>>> No one is waiting for resource 'Storage.HsmDomainMonitorLock', Clearing
>>>>>>>>> records.
>>>>>>>>> Thread-100::INFO::2015-11-27
>>>>>>>>> 12:58:57,360::logUtils::47::dispatcher::(wrapper) Run and protect:
>>>>>>>>> stopMonitoringDomain, Return response: None
>>>>>>>>> Thread-100::DEBUG::2015-11-27
>>>>>>>>> 12:58:57,361::task::1191::Storage.TaskManager.Task::(prepare)
>>>>>>>>> Task=`0128b179-fdb3-474b-a196-8cc81a72a837`::finished: None
>>>>>>>>> Thread-100::DEBUG::2015-11-27
>>>>>>>>> 12:58:57,361::task::595::Storage.TaskManager.Task::(_updateState)
>>>>>>>>> Task=`0128b179-fdb3-474b-a196-8cc81a72a837`::moving from state preparing ->
>>>>>>>>> state finished
>>>>>>>>> Thread-100::DEBUG::2015-11-27
>>>>>>>>> 12:58:57,361::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)
>>>>>>>>> Owner.releaseAll requests {} resources {}
>>>>>>>>> Thread-100::DEBUG::2015-11-27
>>>>>>>>> 12:58:57,361::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
>>>>>>>>> Owner.cancelAll requests {}
>>>>>>>>> Thread-100::DEBUG::2015-11-27
>>>>>>>>> 12:58:57,361::task::993::Storage.TaskManager.Task::(_decref)
>>>>>>>>> Task=`0128b179-fdb3-474b-a196-8cc81a72a837`::ref 0 aborting False
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Thu, Nov 26, 2015 at 4:20 PM, Simone Tiraboschi <
>>>>>>>>> stirabos at redhat.com> wrote:
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Thu, Nov 26, 2015 at 11:05 AM, Budur Nagaraju <
>>>>>>>>>> nbudoor at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> *Below are the entire logs*
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>> Sorry, with the entire log I mean if you can attach or share
>>>>>>>>>> somewhere the whole /var/log/vdsm/vdsm.log  cause the latest ten lines are
>>>>>>>>>> not enough to point out the issue.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> *[root at he ~]# tail -f /var/log/vdsm/vdsm.log *
>>>>>>>>>>>
>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>> 15:16:05,622::protocoldetector::247::vds.MultiProtocolAcceptor::(_handle_connection_read)
>>>>>>>>>>> Detected protocol xml from 127.0.0.1:50944
>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>> 15:16:05,623::BindingXMLRPC::1173::XmlDetector::(handleSocket) xml over
>>>>>>>>>>> http detected from ('127.0.0.1', 50944)
>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>> 15:16:05,703::protocoldetector::187::vds.MultiProtocolAcceptor::(_add_connection)
>>>>>>>>>>> Adding connection from 127.0.0.1:50945
>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>> 15:16:06,101::protocoldetector::201::vds.MultiProtocolAcceptor::(_remove_connection)
>>>>>>>>>>> Connection removed from 127.0.0.1:50945
>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>> 15:16:06,101::protocoldetector::247::vds.MultiProtocolAcceptor::(_handle_connection_read)
>>>>>>>>>>> Detected protocol xml from 127.0.0.1:50945
>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>> 15:16:06,101::BindingXMLRPC::1173::XmlDetector::(handleSocket) xml over
>>>>>>>>>>> http detected from ('127.0.0.1', 50945)
>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>> 15:16:06,182::protocoldetector::187::vds.MultiProtocolAcceptor::(_add_connection)
>>>>>>>>>>> Adding connection from 127.0.0.1:50946
>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>> 15:16:06,710::protocoldetector::201::vds.MultiProtocolAcceptor::(_remove_connection)
>>>>>>>>>>> Connection removed from 127.0.0.1:50946
>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>> 15:16:06,711::protocoldetector::247::vds.MultiProtocolAcceptor::(_handle_connection_read)
>>>>>>>>>>> Detected protocol xml from 127.0.0.1:50946
>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>> 15:16:06,711::BindingXMLRPC::1173::XmlDetector::(handleSocket) xml over
>>>>>>>>>>> http detected from ('127.0.0.1', 50946)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> *[root at he ~]# tail -f /var/log/vdsm/supervdsm.log *
>>>>>>>>>>>
>>>>>>>>>>> MainProcess::DEBUG::2015-11-26
>>>>>>>>>>> 15:13:30,234::supervdsmServer::102::SuperVdsm.ServerCallback::(wrapper)
>>>>>>>>>>> call readMultipathConf with () {}
>>>>>>>>>>> MainProcess::DEBUG::2015-11-26
>>>>>>>>>>> 15:13:30,234::supervdsmServer::109::SuperVdsm.ServerCallback::(wrapper)
>>>>>>>>>>> return readMultipathConf with ['# RHEV REVISION 1.1', '', 'defaults {',
>>>>>>>>>>> '    polling_interval        5', '    getuid_callout
>>>>>>>>>>> "/lib/udev/scsi_id --whitelisted --replace-whitespace --device=/dev/%n"',
>>>>>>>>>>> '    no_path_retry           fail', '    user_friendly_names     no', '
>>>>>>>>>>> flush_on_last_del       yes', '    fast_io_fail_tmo        5', '
>>>>>>>>>>> dev_loss_tmo            30', '    max_fds                 4096', '}', '',
>>>>>>>>>>> 'devices {', 'device {', '    vendor                  "HITACHI"', '
>>>>>>>>>>> product                 "DF.*"', '    getuid_callout
>>>>>>>>>>> "/lib/udev/scsi_id --whitelisted --replace-whitespace --device=/dev/%n"',
>>>>>>>>>>> '}', 'device {', '    vendor                  "COMPELNT"', '
>>>>>>>>>>> product                 "Compellent Vol"', '    no_path_retry
>>>>>>>>>>> fail', '}', 'device {', '    # multipath.conf.default', '
>>>>>>>>>>> vendor                  "DGC"', '    product                 ".*"', '
>>>>>>>>>>> product_blacklist       "LUNZ"', '    path_grouping_policy
>>>>>>>>>>> "group_by_prio"', '    path_checker            "emc_clariion"', '
>>>>>>>>>>> hardware_handler        "1 emc"', '    prio                    "emc"', '
>>>>>>>>>>> failback                immediate', '    rr_weight
>>>>>>>>>>> "uniform"', '    # vdsm required configuration', '
>>>>>>>>>>> getuid_callout          "/lib/udev/scsi_id --whitelisted
>>>>>>>>>>> --replace-whitespace --device=/dev/%n"', '    features                "0"',
>>>>>>>>>>> '    no_path_retry           fail', '}', '}']
>>>>>>>>>>> MainProcess|Thread-13::DEBUG::2015-11-26
>>>>>>>>>>> 15:13:31,365::supervdsmServer::102::SuperVdsm.ServerCallback::(wrapper)
>>>>>>>>>>> call getHardwareInfo with () {}
>>>>>>>>>>> MainProcess|Thread-13::DEBUG::2015-11-26
>>>>>>>>>>> 15:13:31,397::supervdsmServer::109::SuperVdsm.ServerCallback::(wrapper)
>>>>>>>>>>> return getHardwareInfo with {'systemProductName': 'KVM', 'systemUUID':
>>>>>>>>>>> 'f91632f2-7a17-4ddb-9631-742f82a77480', 'systemFamily': 'Red Hat Enterprise
>>>>>>>>>>> Linux', 'systemVersion': 'RHEL 7.0.0 PC (i440FX + PIIX, 1996)',
>>>>>>>>>>> 'systemManufacturer': 'Red Hat'}
>>>>>>>>>>> MainProcess|Thread-21::DEBUG::2015-11-26
>>>>>>>>>>> 15:13:35,393::supervdsmServer::102::SuperVdsm.ServerCallback::(wrapper)
>>>>>>>>>>> call validateAccess with ('qemu', ('qemu', 'kvm'),
>>>>>>>>>>> '/rhev/data-center/mnt/10.204.207.152:_home_vms', 5) {}
>>>>>>>>>>> MainProcess|Thread-21::DEBUG::2015-11-26
>>>>>>>>>>> 15:13:35,395::supervdsmServer::109::SuperVdsm.ServerCallback::(wrapper)
>>>>>>>>>>> return validateAccess with None
>>>>>>>>>>> MainProcess|Thread-22::DEBUG::2015-11-26
>>>>>>>>>>> 15:13:36,067::supervdsmServer::102::SuperVdsm.ServerCallback::(wrapper)
>>>>>>>>>>> call validateAccess with ('qemu', ('qemu', 'kvm'),
>>>>>>>>>>> '/rhev/data-center/mnt/10.204.207.152:_home_vms', 5) {}
>>>>>>>>>>> MainProcess|Thread-22::DEBUG::2015-11-26
>>>>>>>>>>> 15:13:36,069::supervdsmServer::109::SuperVdsm.ServerCallback::(wrapper)
>>>>>>>>>>> return validateAccess with None
>>>>>>>>>>> MainProcess|PolicyEngine::DEBUG::2015-11-26
>>>>>>>>>>> 15:13:40,619::supervdsmServer::102::SuperVdsm.ServerCallback::(wrapper)
>>>>>>>>>>> call ksmTune with ({'run': 0},) {}
>>>>>>>>>>> MainProcess|PolicyEngine::DEBUG::2015-11-26
>>>>>>>>>>> 15:13:40,619::supervdsmServer::109::SuperVdsm.ServerCallback::(wrapper)
>>>>>>>>>>> return ksmTune with None
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> *[root at he ~]# tail -f /var/log/vdsm/connectivity.log *
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> 2015-11-26 15:02:02,632:DEBUG:recent_client:False
>>>>>>>>>>> 2015-11-26 15:04:44,975:DEBUG:recent_client:True
>>>>>>>>>>> 2015-11-26 15:05:15,039:DEBUG:recent_client:False
>>>>>>>>>>> 2015-11-26 15:07:23,311:DEBUG:recent_client:True
>>>>>>>>>>> 2015-11-26 15:08:25,774:DEBUG:recent_client:True,
>>>>>>>>>>> ovirtmgmt:(operstate:up speed:0 duplex:unknown), lo:(operstate:up speed:0
>>>>>>>>>>> duplex:unknown), ;vdsmdummy;:(operstate:down speed:0 duplex:unknown),
>>>>>>>>>>> bond0:(operstate:down speed:0 duplex:unknown), eth0:(operstate:up speed:100
>>>>>>>>>>> duplex:full)
>>>>>>>>>>> 2015-11-26 15:08:55,845:DEBUG:recent_client:False
>>>>>>>>>>> 2015-11-26 15:08:59,859:DEBUG:recent_client:True
>>>>>>>>>>> 2015-11-26 15:09:29,929:DEBUG:recent_client:False
>>>>>>>>>>> 2015-11-26 15:13:32,292:DEBUG:recent_client:True,
>>>>>>>>>>> ovirtmgmt:(operstate:up speed:0 duplex:unknown), lo:(operstate:up speed:0
>>>>>>>>>>> duplex:unknown), ;vdsmdummy;:(operstate:down speed:0 duplex:unknown),
>>>>>>>>>>> bond0:(operstate:down speed:0 duplex:unknown), eth0:(operstate:up speed:100
>>>>>>>>>>> duplex:full)
>>>>>>>>>>> 2015-11-26 15:14:02,363:DEBUG:recent_client:False
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> *[root at he ~]# tail -f /var/log/vdsm/mom.log *
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> 2015-11-26 15:13:30,581 - mom.Policy - INFO - Loaded policy
>>>>>>>>>>> '04-cputune'
>>>>>>>>>>> 2015-11-26 15:13:30,581 - mom.PolicyEngine - INFO - Policy
>>>>>>>>>>> Engine starting
>>>>>>>>>>> 2015-11-26 15:13:30,582 - mom.RPCServer - INFO - RPC Server is
>>>>>>>>>>> disabled
>>>>>>>>>>> 2015-11-26 15:13:40,618 - mom.Controllers.KSM - INFO - Updating
>>>>>>>>>>> KSM configuration: pages_to_scan:0 merge_across_nodes:8 run:0
>>>>>>>>>>> sleep_millisecs:0
>>>>>>>>>>> 2015-11-26 15:14:51,492 - mom.RPCServer - INFO - getStatistics()
>>>>>>>>>>> 2015-11-26 15:14:56,962 - mom.RPCServer - INFO - getStatistics()
>>>>>>>>>>> 2015-11-26 15:15:02,451 - mom.RPCServer - INFO - getStatistics()
>>>>>>>>>>> 2015-11-26 15:15:07,777 - mom.RPCServer - INFO - getStatistics()
>>>>>>>>>>> 2015-11-26 15:15:13,267 - mom.RPCServer - INFO - getStatistics()
>>>>>>>>>>> 2015-11-26 15:15:18,765 - mom.RPCServer - INFO - getStatistics()
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Thu, Nov 26, 2015 at 3:28 PM, Budur Nagaraju <
>>>>>>>>>>> nbudoor at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Below are the logs,
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> [root at he ~]# tail -f /var/log/vdsm/vdsm.log
>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>> 15:16:05,622::protocoldetector::247::vds.MultiProtocolAcceptor::(_handle_connection_read)
>>>>>>>>>>>> Detected protocol xml from 127.0.0.1:50944
>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>> 15:16:05,623::BindingXMLRPC::1173::XmlDetector::(handleSocket) xml over
>>>>>>>>>>>> http detected from ('127.0.0.1', 50944)
>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>> 15:16:05,703::protocoldetector::187::vds.MultiProtocolAcceptor::(_add_connection)
>>>>>>>>>>>> Adding connection from 127.0.0.1:50945
>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>> 15:16:06,101::protocoldetector::201::vds.MultiProtocolAcceptor::(_remove_connection)
>>>>>>>>>>>> Connection removed from 127.0.0.1:50945
>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>> 15:16:06,101::protocoldetector::247::vds.MultiProtocolAcceptor::(_handle_connection_read)
>>>>>>>>>>>> Detected protocol xml from 127.0.0.1:50945
>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>> 15:16:06,101::BindingXMLRPC::1173::XmlDetector::(handleSocket) xml over
>>>>>>>>>>>> http detected from ('127.0.0.1', 50945)
>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>> 15:16:06,182::protocoldetector::187::vds.MultiProtocolAcceptor::(_add_connection)
>>>>>>>>>>>> Adding connection from 127.0.0.1:50946
>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>> 15:16:06,710::protocoldetector::201::vds.MultiProtocolAcceptor::(_remove_connection)
>>>>>>>>>>>> Connection removed from 127.0.0.1:50946
>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>> 15:16:06,711::protocoldetector::247::vds.MultiProtocolAcceptor::(_handle_connection_read)
>>>>>>>>>>>> Detected protocol xml from 127.0.0.1:50946
>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>> 15:16:06,711::BindingXMLRPC::1173::XmlDetector::(handleSocket) xml over
>>>>>>>>>>>> http detected from ('127.0.0.1', 50946)
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Thu, Nov 26, 2015 at 3:06 PM, Simone Tiraboschi <
>>>>>>>>>>>> stirabos at redhat.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Thu, Nov 26, 2015 at 10:33 AM, Budur Nagaraju <
>>>>>>>>>>>>> nbudoor at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> I have done a fresh installation and now am getting the below
>>>>>>>>>>>>>> error,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [ INFO  ] Updating hosted-engine configuration
>>>>>>>>>>>>>> [ INFO  ] Stage: Transaction commit
>>>>>>>>>>>>>> [ INFO  ] Stage: Closing up
>>>>>>>>>>>>>>           The following network ports should be opened:
>>>>>>>>>>>>>>               tcp:5900
>>>>>>>>>>>>>>               tcp:5901
>>>>>>>>>>>>>>               udp:5900
>>>>>>>>>>>>>>               udp:5901
>>>>>>>>>>>>>>           An example of the required configuration for
>>>>>>>>>>>>>> iptables can be found at:
>>>>>>>>>>>>>>               /etc/ovirt-hosted-engine/iptables.example
>>>>>>>>>>>>>>           In order to configure firewalld, copy the files from
>>>>>>>>>>>>>>           /etc/ovirt-hosted-engine/firewalld to
>>>>>>>>>>>>>> /etc/firewalld/services
>>>>>>>>>>>>>>           and execute the following commands:
>>>>>>>>>>>>>>               firewall-cmd -service hosted-console
>>>>>>>>>>>>>> [ INFO  ] Creating VM
>>>>>>>>>>>>>> [ ERROR ] Failed to execute stage 'Closing up': Cannot set
>>>>>>>>>>>>>> temporary password for console connection. The VM may not have been
>>>>>>>>>>>>>> created: please check VDSM logs
>>>>>>>>>>>>>> [ INFO  ] Stage: Clean up
>>>>>>>>>>>>>> [ INFO  ] Generating answer file
>>>>>>>>>>>>>> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20151126145701.conf'
>>>>>>>>>>>>>> [ INFO  ] Stage: Pre-termination
>>>>>>>>>>>>>> [ INFO  ] Stage: Termination
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [root at he ovirt]# tail -f /var/log/vdsm/
>>>>>>>>>>>>>> backup/           connectivity.log  mom.log
>>>>>>>>>>>>>> supervdsm.log     vdsm.log
>>>>>>>>>>>>>> [root at he ovirt]# tail -f /var/log/vdsm/vdsm.log
>>>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>>>> 14:57:07,564::protocoldetector::247::vds.MultiProtocolAcceptor::(_handle_connection_read)
>>>>>>>>>>>>>> Detected protocol xml from 127.0.0.1:42741
>>>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>>>> 14:57:07,564::BindingXMLRPC::1173::XmlDetector::(handleSocket) xml over
>>>>>>>>>>>>>> http detected from ('127.0.0.1', 42741)
>>>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>>>> 14:57:07,644::protocoldetector::187::vds.MultiProtocolAcceptor::(_add_connection)
>>>>>>>>>>>>>> Adding connection from 127.0.0.1:42742
>>>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>>>> 14:57:08,088::protocoldetector::201::vds.MultiProtocolAcceptor::(_remove_connection)
>>>>>>>>>>>>>> Connection removed from 127.0.0.1:42742
>>>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>>>> 14:57:08,088::protocoldetector::247::vds.MultiProtocolAcceptor::(_handle_connection_read)
>>>>>>>>>>>>>> Detected protocol xml from 127.0.0.1:42742
>>>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>>>> 14:57:08,088::BindingXMLRPC::1173::XmlDetector::(handleSocket) xml over
>>>>>>>>>>>>>> http detected from ('127.0.0.1', 42742)
>>>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>>>> 14:57:08,171::protocoldetector::187::vds.MultiProtocolAcceptor::(_add_connection)
>>>>>>>>>>>>>> Adding connection from 127.0.0.1:42743
>>>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>>>> 14:57:08,572::protocoldetector::201::vds.MultiProtocolAcceptor::(_remove_connection)
>>>>>>>>>>>>>> Connection removed from 127.0.0.1:42743
>>>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>>>> 14:57:08,573::protocoldetector::247::vds.MultiProtocolAcceptor::(_handle_connection_read)
>>>>>>>>>>>>>> Detected protocol xml from 127.0.0.1:42743
>>>>>>>>>>>>>> Detector thread::DEBUG::2015-11-26
>>>>>>>>>>>>>> 14:57:08,573::BindingXMLRPC::1173::XmlDetector::(handleSocket) xml over
>>>>>>>>>>>>>> http detected from ('127.0.0.1', 42743)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> It failed before, can you please attach the whole VDSM logs?
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Thu, Nov 26, 2015 at 2:01 PM, Simone Tiraboschi <
>>>>>>>>>>>>>> stirabos at redhat.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Thu, Nov 26, 2015 at 7:30 AM, Budur Nagaraju <
>>>>>>>>>>>>>>> nbudoor at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Its a fresh setup ,I have deleted all the vms ,still am
>>>>>>>>>>>>>>>> facing same issues .
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Can you please paste the output of
>>>>>>>>>>>>>>>  vdsClient -s 0 list
>>>>>>>>>>>>>>> ?
>>>>>>>>>>>>>>> thanks
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Thu, Nov 26, 2015 at 11:56 AM, Oved Ourfali <
>>>>>>>>>>>>>>>> oourfali at redhat.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Seems like you have existing VMs running on the host (you
>>>>>>>>>>>>>>>>> can check that by looking for qemu processes on your host).
>>>>>>>>>>>>>>>>> Is that a clean deployment, or was the host used before
>>>>>>>>>>>>>>>>> for running VMs?
>>>>>>>>>>>>>>>>> Perhaps you already ran the hosted engine setup, and the
>>>>>>>>>>>>>>>>> VM was left there?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> CC-ing Sandro who is more familiar in that than me.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>> Oved
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Thu, Nov 26, 2015 at 7:07 AM, Budur Nagaraju <
>>>>>>>>>>>>>>>>> nbudoor at gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> HI
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Getting below error while configuring Hosted engine,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> root at he ~]# hosted-engine --deploy
>>>>>>>>>>>>>>>>>> [ INFO  ] Stage: Initializing
>>>>>>>>>>>>>>>>>> [ INFO  ] Generating a temporary VNC password.
>>>>>>>>>>>>>>>>>> [ INFO  ] Stage: Environment setup
>>>>>>>>>>>>>>>>>>           Continuing will configure this host for serving
>>>>>>>>>>>>>>>>>> as hypervisor and create a VM where you have to install oVirt Engine
>>>>>>>>>>>>>>>>>> afterwards.
>>>>>>>>>>>>>>>>>>           Are you sure you want to continue? (Yes,
>>>>>>>>>>>>>>>>>> No)[Yes]: yes
>>>>>>>>>>>>>>>>>>           Configuration files: []
>>>>>>>>>>>>>>>>>>           Log file:
>>>>>>>>>>>>>>>>>> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20151126102302-bkozgk.log
>>>>>>>>>>>>>>>>>>           Version: otopi-1.3.2 (otopi-1.3.2-1.el6)
>>>>>>>>>>>>>>>>>>           It has been detected that this program is
>>>>>>>>>>>>>>>>>> executed through an SSH connection without using screen.
>>>>>>>>>>>>>>>>>>           Continuing with the installation may lead to
>>>>>>>>>>>>>>>>>> broken installation if the network connection fails.
>>>>>>>>>>>>>>>>>>           It is highly recommended to abort the
>>>>>>>>>>>>>>>>>> installation and run it inside a screen session using command "screen".
>>>>>>>>>>>>>>>>>>           Do you want to continue anyway? (Yes, No)[No]:
>>>>>>>>>>>>>>>>>> yes
>>>>>>>>>>>>>>>>>> [WARNING] Cannot detect if hardware supports
>>>>>>>>>>>>>>>>>> virtualization
>>>>>>>>>>>>>>>>>> [ INFO  ] Bridge ovirtmgmt already created
>>>>>>>>>>>>>>>>>> [ INFO  ] Stage: Environment packages setup
>>>>>>>>>>>>>>>>>> [ INFO  ] Stage: Programs detection
>>>>>>>>>>>>>>>>>> [ INFO  ] Stage: Environment setup
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> *[ ERROR ] The following VMs has been found:
>>>>>>>>>>>>>>>>>> 2b8d6d91-d838-44f6-ae3b-c92cda014280[ ERROR ] Failed to execute stage
>>>>>>>>>>>>>>>>>> 'Environment setup': Cannot setup Hosted Engine with other VMs running*
>>>>>>>>>>>>>>>>>> [ INFO  ] Stage: Clean up
>>>>>>>>>>>>>>>>>> [ INFO  ] Generating answer file
>>>>>>>>>>>>>>>>>> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20151126102310.conf'
>>>>>>>>>>>>>>>>>> [ INFO  ] Stage: Pre-termination
>>>>>>>>>>>>>>>>>> [ INFO  ] Stage: Termination
>>>>>>>>>>>>>>>>>> [root at he ~]#
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>>>>>>>> Users at ovirt.org
>>>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>>>>>> Users at ovirt.org
>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Users mailing list
>>>>>>>>> Users at ovirt.org
>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Sandro Bonazzola
>>>>>>>> Better technology. Faster innovation. Powered by community
>>>>>>>> collaboration.
>>>>>>>> See how it works at redhat.com
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>
>>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20151202/02ed9382/attachment-0001.html>


More information about the Users mailing list