[ovirt-users] Problem with hosted engine setup - vsdmd does not start

[Willard Dennis]

Any thoughts on this issue?? This is holding up my project (oVirt hosted engine install won’t proceed if VDSM service is not running…)  Why am I even having such problems with the VDSM service? It’s on a vanilla CentOS 7 install…

Thanks
Will


> On Dec 2, 2015, at 10:35 AM, Will Dennis <wdennis at nec-labs.com> wrote:
> 
> Ran the configure the first time and got an error...
>  
> root at ovirt-node-01 ~> vdsm-tool configure --force
>  
> Checking configuration status...
>  
> Current revision of multipath.conf detected, preserving
> libvirt is not configured for vdsm yet
> FAILED: conflicting vdsm and libvirt-qemu tls configuration.
> vdsm.conf with ssl=True requires the following changes:
> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
> qemu.conf: spice_tls=1.
>  
> Running configure...
> Reconfiguration of sebool is done.
> Reconfiguration of passwd is done.
> Reconfiguration of libvirt is done.
>  
> Done configuring modules to VDSM.
>  
> So, made the appropriate edits to libvirtd.conf and qemu.conf
>  
> root at ovirt-node-01 ~> grep "^[a-z]" /etc/libvirt/libvirtd.conf
> listen_tls = 1
> listen_tcp = 0
> auth_tcp = "sasl"
> auth_unix_rw="sasl"
> ca_file="/etc/pki/vdsm/certs/cacert.pem"
> cert_file="/etc/pki/vdsm/certs/vdsmcert.pem"
> host_uuid="2b026fff-bae2-429f-9386-c60ffc5f3f32"
> keepalive_interval=-1
> key_file="/etc/pki/vdsm/keys/vdsmkey.pem"
> unix_sock_group="qemu"
> unix_sock_rw_perms="0770"
>  
> root at ovirt-node-01 ~> grep "^[a-z]" /etc/libvirt/qemu.conf
> spice_tls = 1
> auto_dump_path="/var/log/core"
> dynamic_ownership=0
> lock_manager="sanlock"
> remote_display_port_max=6923
> remote_display_port_min=5900
> save_image_format="lzop"
> spice_tls=1
> spice_tls_x509_cert_dir="/etc/pki/vdsm/libvirt-spice"
>  
> Then re-ran the config...
>  
> root at ovirt-node-01 ~> vdsm-tool configure --force
>  
> Checking configuration status...
>  
> Current revision of multipath.conf detected, preserving
> libvirt is already configured for vdsm
> SUCCESS: ssl configured to true. No conflicts
>  
> Running configure...
> Reconfiguration of sebool is done.
> Reconfiguration of libvirt is done.
>  
> Done configuring modules to VDSM.
>  
> Sadly, vdsmd STILL fails to start...
>  
> root at ovirt-node-01 ~> systemctl restart vdsmd
> root at ovirt-node-01 ~> systemctl status vdsmd
> vdsmd.service - Virtual Desktop Server Manager
>    Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled)
>    Active: activating (auto-restart) (Result: exit-code) since Wed 2015-12-02 10:30:47 EST; 1s ago
>   Process: 6522 ExecStopPost=/usr/libexec/vdsm/vdsmd_init_common.sh --post-stop (code=exited, status=0/SUCCESS)
>   Process: 6506 ExecStart=/usr/share/vdsm/daemonAdapter -0 /dev/null -1 /dev/null -2 /dev/null /usr/share/vdsm/vdsm (code=exited, status=1/FAILURE)
>   Process: 6433 ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh --pre-start (code=exited, status=0/SUCCESS)
> Main PID: 6506 (code=exited, status=1/FAILURE)
>  
> Dec 02 10:30:47 ovirt-node-01 systemd[1]: Unit vdsmd.service entered failed ....
> Dec 02 10:30:47 ovirt-node-01 systemd[1]: vdsmd.service holdoff time over, s....
> Hint: Some lines were ellipsized, use -l to show in full.
>  
> :(
>  
> From: Simone Tiraboschi [mailto:stirabos at redhat.com <mailto:stirabos at redhat.com>] 
> Sent: Wednesday, December 02, 2015 3:57 AM
> To: Will Dennis
> Cc: Fabian Deutsch; users
> Subject: Re: [ovirt-users] Problem with hosted engine setup - vsdmd does not start
>  
> [snip]
>  
> Now can you please now configure it with:
>   vdsm-tool configure --force
>  
> Then you have to restart it

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20151216/39e81da0/attachment-0001.html>