[ovirt-users] change network MTU settings without taking all the VMs down?

[Donny Davis]

Please let us know how it works out, it may be helpful to someone in the future

Cheers
Donny DOn Jan 27, 2015 2:45 PM, Darrell Budic <budic at onholyground.com> wrote:
>
> Ah, good idea. That will be cleaner than the hack I was considering, I’ll see if I can work that somehow. Thanks! 
>
> > On Jan 27, 2015, at 2:59 PM, Donny Davis <donny at cloudspin.me> wrote: 
> > 
> > I'm on the same.. And I see the issue. Why don't you create a new network with the correct parameters and then move the network the VM is attached to 
> > 
> > On Jan 27, 2015 1:39 PM, Darrell Budic <budic at onholyground.com> wrote: 
> >> 
> >> Try changing that custom MTU and hitting OK. I get: 
> >> 
> >> on 3.5 and 3.5.1. What version are you running? 
> >> 
> >>> On Jan 27, 2015, at 2:04 PM, Donny Davis <donny at cloudspin.me> wrote: 
> >>> 
> >>> Maybe I missed your question, but I can change the MTU from the gui without any problems. As long as you make sure there are not any vm's on the host you are trying to sync, I have experienced no issues. 
> >>> 
> >>> Donny 
> >>> 
> >>> -----Original Message----- 
> >>> From: Darrell Budic [mailto:budic at onholyground.com] 
> >>> Sent: Tuesday, January 27, 2015 12:30 PM 
> >>> To: Donny Davis 
> >>> Cc: users at ovirt.org 
> >>> Subject: Re: [ovirt-users] change network MTU settings without taking all the VMs down? 
> >>> 
> >>> Except you can’t change the network MTU setting in the first place on the network in the GUI. I’ve thought about doing it in the database, with a migration as you mention. Just checking first for better options :) 
> >>> 
> >>> 
> >>>> On Jan 27, 2015, at 12:08 PM, Donny Davis <donny at cloudspin.me> wrote: 
> >>>> 
> >>>> Migrate the vms between hosts, and when a host gets to no running VMS you can sync that network. 
> >>>> 
> >>>> Donny D 
> >>>> cloudspin.meOn Jan 27, 2015 10:43 AM, Darrell Budic <budic at onholyground.com> wrote: 
> >>>>> 
> >>>>> 
> >>>>> I finally got a couple of networks our from behind a wan based layer 2 bridge that required me to run at MTU 1448, and would like to get back up to MTU 1500. I see the GUI won’t let me do that while the network is in use. Any way around this, clean or otherwise? Restarting VMs to update them is ok, just trying to avoid having to take everything down at the same time. 
> >>>>> 
> >>>>> -Darrell 
> >>>>> _______________________________________________ 
> >>>>> Users mailing list 
> >>>>> Users at ovirt.org 
> >>>>> http://lists.ovirt.org/mailman/listinfo/users 
> >>> 
> >>> 
> >>> <Capture.PNG> 
> >> 
> >> 
>