[ovirt-users] Error during hosted-engine-setup for 3.5.1 on F20 (The VDSM host was found in a failed state)

Tue Mar 10 09:40:13 EDT 2015

On 03/10/2015 04:58 AM, Simone Tiraboschi wrote:
>
> ----- Original Message -----
>> From: "Bob Doolittle" <bob at doolittle.us.com>
>> To: "Simone Tiraboschi" <stirabos at redhat.com>
>> Cc: "users-ovirt" <users at ovirt.org>
>> Sent: Monday, March 9, 2015 11:48:03 PM
>> Subject: Re: [ovirt-users] Error during hosted-engine-setup for 3.5.1 on F20 (The VDSM host was found in a failed
>> state)
>>
>>
>> On 03/09/2015 02:47 PM, Bob Doolittle wrote:
>>> Resending with CC to list (and an update).
>>>
>>> On 03/09/2015 01:40 PM, Simone Tiraboschi wrote:
>>>> ----- Original Message -----
>>>>> From: "Bob Doolittle" <bob at doolittle.us.com>
>>>>> To: "Simone Tiraboschi" <stirabos at redhat.com>
>>>>> Cc: "users-ovirt" <users at ovirt.org>
>>>>> Sent: Monday, March 9, 2015 6:26:30 PM
>>>>> Subject: Re: [ovirt-users] Error during hosted-engine-setup for 3.5.1 on
>>>>> F20 (Cannot add the host to cluster ... SSH
>>>>> has failed)
>>>>>
...
>>>>> OK, I've started over. Simply removing the storage domain was
>>>>> insufficient,
>>>>> the hosted-engine deploy failed when it found the HA and Broker services
>>>>> already configured. I decided to just start over fresh starting with
>>>>> re-installing the OS on my host.
>>>>>
>>>>> I can't deploy DNS at the moment, so I have to simply replicate
>>>>> /etc/hosts
>>>>> files on my host/engine. I did that this time, but have run into a new
>>>>> problem:
>>>>>
>>>>> [ INFO  ] Engine replied: DB Up!Welcome to Health Status!
>>>>>           Enter the name of the cluster to which you want to add the host
>>>>>           (Default) [Default]:
>>>>> [ INFO  ] Waiting for the host to become operational in the engine. This
>>>>> may
>>>>> take several minutes...
>>>>> [ ERROR ] The VDSM host was found in a failed state. Please check engine
>>>>> and
>>>>> bootstrap installation logs.
>>>>> [ ERROR ] Unable to add ovirt-vm to the manager
>>>>>           Please shutdown the VM allowing the system to launch it as a
>>>>>           monitored service.
>>>>>           The system will wait until the VM is down.
>>>>> [ ERROR ] Failed to execute stage 'Closing up': [Errno 111] Connection
>>>>> refused
>>>>> [ INFO  ] Stage: Clean up
>>>>> [ ERROR ] Failed to execute stage 'Clean up': [Errno 111] Connection
>>>>> refused
>>>>>
>>>>>
>>>>> I've attached my engine log and the ovirt-hosted-engine-setup log. I
>>>>> think I
>>>>> had an issue with resolving external hostnames, or else a connectivity
>>>>> issue
>>>>> during the install.
>>>> For some reason your engine wasn't able to deploy your hosts but the SSH
>>>> session this time was established.
>>>> 2015-03-09 13:05:58,514 ERROR
>>>> [org.ovirt.engine.core.bll.InstallVdsInternalCommand]
>>>> (org.ovirt.thread.pool-8-thread-3) [3cf91626] Host installation failed
>>>> for host 217016bb-fdcd-4344-a0ca-4548262d10a8, ovirt-vm.:
>>>> java.io.IOException: Command returned failure code 1 during SSH session
>>>> 'root at xion2.smartcity.net'
>>>>
>>>> Can you please attach host-deploy logs from the engine VM?
>>> OK, attached.
>>>
>>> Like I said, it looks to me like a name-resolution issue during the yum
>>> update on the engine. I think I've fixed that, but do you have a better
>>> suggestion for cleaning up and re-deploying other than installing the OS
>>> on my host and starting all over again?
>> I just finished starting over from scratch, starting with OS installation on
>> my host/node, and wound up with a very similar problem - the engine couldn't
>> reach the hosts during the yum operation. But this time the error was
>> "Network is unreachable". Which is weird, because I can ssh into the engine
>> and ping many of those hosts, after the operation has failed.
>>
>> Here's my latest host-deploy log from the engine. I'd appreciate any clues.
> It seams that now your host is able to resolve that addresses but it's not able to connect over http.
> On your hosts some of them resolves as IPv6 addresses; can you please try to use curl to get one of the file that it wasn't able to fetch?
> Can you please check your network configuration before and after host-deploy?

I can give you the network configuration after host-deploy, at least for the host/Node. The engine won't start for me this morning, after I shut down the host for the night.

In order to give you the config before host-deploy (or, apparently for the engine), I'll have to re-install the OS on the host and start again from scratch. Obviously I'd rather not do that unless absolutely necessary.

Here's the host config after the failed host-deploy:

Host/Node:

# ip route
169.254.0.0/16 dev ovirtmgmt  scope link  metric 1007 
172.16.0.0/16 dev ovirtmgmt  proto kernel  scope link  src 172.16.0.58 

# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: p3p2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master ovirtmgmt state UP group default qlen 1000
    link/ether b8:ca:3a:79:22:12 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::baca:3aff:fe79:2212/64 scope link 
       valid_lft forever preferred_lft forever
3: bond0: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN group default 
    link/ether 56:56:f7:cf:73:27 brd ff:ff:ff:ff:ff:ff
4: wlp2s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 1c:3e:84:50:8d:c3 brd ff:ff:ff:ff:ff:ff
6: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default 
    link/ether 22:a1:01:9e:30:71 brd ff:ff:ff:ff:ff:ff
7: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default 
    link/ether b8:ca:3a:79:22:12 brd ff:ff:ff:ff:ff:ff
    inet 172.16.0.58/16 brd 172.16.255.255 scope global ovirtmgmt
       valid_lft forever preferred_lft forever
    inet6 fe80::baca:3aff:fe79:2212/64 scope link 
       valid_lft forever preferred_lft forever

The only unusual thing about my setup that I can think of, from the network perspective, is that my physical host has a wireless interface, which I've not configured. Could it be confusing hosted-engine --deploy?

-Bob