[ovirt-users] Power Management config on Ovirt
Piotr Kliczewski
piotr.kliczewski at gmail.com
Tue Mar 17 07:34:55 EDT 2015
On Tue, Mar 17, 2015 at 12:18 PM, Renchu Mathew <renchu at cracknell.com> wrote:
> Hi Piotr,
>
> I have re-installed the node with ovirt node 3.5 latest version and tried the power management and it shows test succeeded, on but if I stop the network of one of the node the running vm is not migrating to the other instead both the nodes are getting down. Can anybody help me on this?
>
Please provide engine and both nodes logs for analysis.
>
> Also is it possible to use the resources (CPU cores and memory) from other node in the same cluster or combine 2 nodes in same clusters and create a vm on that.
>
> Regards
>
> Renchu Mathew
>
> -----Original Message-----
> From: Piotr Kliczewski [mailto:pkliczew at redhat.com]
> Sent: Tuesday, January 27, 2015 2:04 PM
> To: Renchu Mathew
> Cc: Piotr Kliczewski; Eli Mesika; users at ovirt.org
> Subject: Re: [ovirt-users] Power Management config on Ovirt
>
>
>
>
>
> ----- Original Message -----
>> From: "Renchu Mathew" <renchu at cracknell.com>
>> To: "Piotr Kliczewski" <pkliczew at redhat.com>
>> Cc: "Piotr Kliczewski" <piotr.kliczewski at gmail.com>, "Eli Mesika"
>> <emesika at redhat.com>, users at ovirt.org
>> Sent: Tuesday, January 27, 2015 10:48:12 AM
>> Subject: RE: [ovirt-users] Power Management config on Ovirt
>>
>> Hi Piotr,
>>
>> Can you please provide me the link to download the new node iso? I can
>> see only ovirt live iso.
>>
>
> I saw that Douglas sent following links in other thread [1] on this list:
>
> centos7:
> http://jenkins.ovirt.org/job/ovirt-node_master_create-iso-el7_merged/
>
> Fedora20:
> http://jenkins.ovirt.org/job/ovirt-node_master_create-iso-fc20_merged/
>
> Please note that "We should share the official iso this week."
>
> [1] http://lists.ovirt.org/pipermail/users/2015-January/030846.html
>
>>
>> Regards
>>
>> Renchu Mathew
>>
>> -----Original Message-----
>> From: Piotr Kliczewski [mailto:pkliczew at redhat.com]
>> Sent: Tuesday, January 27, 2015 12:21 PM
>> To: Renchu Mathew
>> Cc: Piotr Kliczewski; Eli Mesika; users at ovirt.org
>> Subject: Re: [ovirt-users] Power Management config on Ovirt
>>
>> Hi Mathew,
>>
>> It seems like this is quite old version (September 2014). There were
>> good number of fixes in this area.
>>
>> Looking at provided logs I am not able to tell which call is exactly failing.
>> Do you have any steps to reproduce?
>>
>> Thanks,
>> Piotr
>>
>> ----- Original Message -----
>> From: "Renchu Mathew" <renchu at cracknell.com>
>> To: "Piotr Kliczewski" <piotr.kliczewski at gmail.com>
>> Cc: "Eli Mesika" <emesika at redhat.com>, "Piotr Kliczewski"
>> <pkliczew at redhat.com>, users at ovirt.org
>> Sent: Monday, January 26, 2015 5:15:46 AM
>> Subject: RE: [ovirt-users] Power Management config on Ovirt
>>
>> Hi Piotr,
>> VDSM Version is vdsm-4.16.4-0.el6
>>
>> Regards
>>
>> Renchu Mathew
>> .
>>
>> From: Piotr Kliczewski [mailto:piotr.kliczewski at gmail.com]
>> Sent: Sunday, January 25, 2015 6:08 PM
>> To: Renchu Mathew
>> Cc: Eli Mesika; Piotr Kliczewski; users at ovirt.org
>> Subject: Re: [ovirt-users] Power Management config on Ovirt
>>
>>
>>
>> On Sun, Jan 25, 2015 at 2:07 PM, Renchu Mathew
>> <renchu at cracknell.com<mailto:renchu at cracknell.com>> wrote:
>>
>> Hi Eli,
>>
>>
>>
>> I have 2 hypervisor host and both are installed with below iso file.
>> Master data domain is glusterfs which is configured on another server.
>> Is there any latest iso available?
>>
>>
>>
>> ovirt-node-iso-3.5.0.ovirt35.20140912.el6 (Edited).
>>
>> @Eli - Do we know which vdsm version is in this iso?
>>
>>
>>
>>
>> Please find below details.
>>
>>
>>
>> [cid:image001.png at 01D0393F.9A5CF2D0]
>>
>>
>>
>> Thanks & Regards
>>
>>
>>
>> Renchu Mathew
>>
>>
>>
>> -----Original Message-----
>> From: Eli Mesika
>> [mailto:emesika at redhat.com<mailto:emesika at redhat.com>]
>> Sent: Sunday, January 25, 2015 4:46 PM
>> To: Renchu Mathew
>> Cc: Martin Perina; users at ovirt.org<mailto:users at ovirt.org>; Piotr
>> Kliczewski
>> Subject: Re: [ovirt-users] Power Management config on Ovirt
>>
>>
>>
>>
>>
>>
>>
>> ----- Original Message -----
>>
>> > From: "Renchu Mathew"
>> > <renchu at cracknell.com<mailto:renchu at cracknell.com>>
>>
>> > To: "Eli Mesika" <emesika at redhat.com<mailto:emesika at redhat.com>>
>>
>> > Cc: "Martin Perina" <mperina at redhat.com<mailto:mperina at redhat.com>>,
>> > users at ovirt.org<mailto:users at ovirt.org>
>>
>> > Sent: Sunday, January 25, 2015 11:19:21 AM
>>
>> > Subject: RE: [ovirt-users] Power Management config on Ovirt
>>
>> >
>>
>> > Hi Eli,
>>
>> >
>>
>> > Please use any details.
>>
>> >
>>
>> > Thanks for your support.
>>
>> >
>>
>> > Regards
>>
>> >
>>
>> > Renchu Mathew
>>
>>
>>
>> Hi again
>>
>>
>>
>> Looking in the logs I see that this is a issue we handled when we
>> switched from XML RPC to JSON RPC protocol.
>>
>> Which vdsm is installed in the proxy host ?
>>
>> I am adding Piotr who is on charge of the JSON RPC protocol and who
>> helped me in the past when I got a similar error on PM operations
>>
>> It looks like marshaling issue but I am not sure whether it was
>> already fixed or it is something new. I am not able to match a call
>> when looking at engine.log.
>>
>>
>>
>>
>>
>> >
>>
>> > -----Original Message-----
>>
>> > From: Eli Mesika
>> > [mailto:emesika at redhat.com<mailto:emesika at redhat.com>]
>>
>> > Sent: Sunday, January 25, 2015 12:58 PM
>>
>> > To: Renchu Mathew
>>
>> > Cc: Martin Perina; users at ovirt.org<mailto:users at ovirt.org>
>>
>> > Subject: Re: [ovirt-users] Power Management config on Ovirt
>>
>> >
>>
>> > Hi Renchu
>>
>> >
>>
>> > I am looking currently on he case and will respond later on today
>>
>> > after investigating the logs.
>>
>> > If I will not find anything, can I use the details for the host PM
>>
>> > only for status command to try to debug and find the source of the
>> > problem ?
>>
>> >
>>
>> > Thanks
>>
>> >
>>
>> > Eli
>>
>> >
>>
>> > ----- Original Message -----
>>
>> > > From: "Renchu Mathew"
>> > > <renchu at cracknell.com<mailto:renchu at cracknell.com>>
>>
>> > > To: "Martin Perina"
>> > > <mperina at redhat.com<mailto:mperina at redhat.com>>
>>
>> > > Cc: users at ovirt.org<mailto:users at ovirt.org>, "Eli Mesika"
>> > > <emesika at redhat.com<mailto:emesika at redhat.com>>
>>
>> > > Sent: Sunday, January 25, 2015 6:50:00 AM
>>
>> > > Subject: RE: [ovirt-users] Power Management config on Ovirt
>>
>> > >
>>
>> > > Hi Martin,
>>
>> > >
>>
>> > > I got the below output when I run the command and it works from
>> > > both
>>
>> > > the nodes.
>>
>> > >
>>
>> > > fence_ipmilan -a 192.168.1.114 -l admin -p admin -o status -v -P
>>
>> > >
>>
>> > > Getting status of IPMI:192.168.1.114...Spawning:
>> > > '/usr/bin/ipmitool
>>
>> > > -I lanplus -H '192.168.1.114' -U 'admin' -P '[set]' -v chassis
>> > > power
>>
>> > > status'...
>>
>> > > Chassis power = On
>>
>> > > Done
>>
>> > >
>>
>> > > Thanks
>>
>> > >
>>
>> > > Renchu Mathew | Sr. IT Administrator
>>
>> > >
>>
>> > >
>>
>> > >
>>
>> > > CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T
>>
>> > > +971 4
>>
>> > > 3445417 | F +971 4 3493675<tel:%2B971%204%203493675> | M +971
>> > > 50 7386484<tel:%2B971%2050%207386484> ABU DHABI | DUBAI
>>
>> > > | LONDON | MUSCAT | DOHA | JEDDAH EMAIL
>> > > | renchu at cracknell.com<mailto:renchu at cracknell.com> | WEB
>>
>> > > www.cracknell.com<http://www.cracknell.com>
>>
>> > >
>>
>> > > This email, its content and any files transmitted with it are
>>
>> > > intended solely for the addressee(s) and may be legally privileged
>>
>> > > and/or confidential. If you are not the intended recipient please
>>
>> > > let us know by email reply and delete it from the system. Please
>>
>> > > note that any views or opinions presented in this email do not
>>
>> > > necessarily represent those of the company. Email transmissions
>>
>> > > cannot be guaranteed to be secure or error-free as information
>> > > could
>>
>> > > be intercepted, corrupted, lost, destroyed, arrive late or
>>
>> > > incomplete, or contain viruses. The company therefore does not
>>
>> > > accept liability for any errors or omissions in the contents of
>> > > this
>>
>> > > message which arise as a result of email transmission.
>>
>> > >
>>
>> > >
>>
>> > > -----Original Message-----
>>
>> > > From: Martin Perina
>> > > [mailto:mperina at redhat.com<mailto:mperina at redhat.com>]
>>
>> > > Sent: Thursday, January 22, 2015 6:12 PM
>>
>> > > To: Renchu Mathew
>>
>> > > Cc: users at ovirt.org<mailto:users at ovirt.org>; Eli Mesika
>>
>> > > Subject: Re: [ovirt-users] Power Management config on Ovirt
>>
>> > >
>>
>> > >
>>
>> > >
>>
>> > > ----- Original Message -----
>>
>> > > > From: "Renchu Mathew"
>> > > > <renchu at cracknell.com<mailto:renchu at cracknell.com>>
>>
>> > > > To: "Martin Perina"
>> > > > <mperina at redhat.com<mailto:mperina at redhat.com>>
>>
>> > > > Cc: users at ovirt.org<mailto:users at ovirt.org>
>>
>> > > > Sent: Thursday, January 22, 2015 2:39:43 PM
>>
>> > > > Subject: RE: [ovirt-users] Power Management config on Ovirt
>>
>> > > >
>>
>> > > > Hi Martin,
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > > Yes. The vdsm host.log is from node-02.
>>
>> > >
>>
>> > > That's strange, I cannot find any call to fenceNode which should
>>
>> > > appear, if PM status is gathered.
>>
>> > >
>>
>> > > Eli, any idea?
>>
>> > >
>>
>> > > > I have checked the link and it says we need to install the sever
>>
>> > > > view management agent & net-snmp on the hosts.
>>
>> > > > Do we need to try this? How to install this on node? I used the
>>
>> > > > below irmc admin user.
>>
>> > >
>>
>> > > Not, AFAIK this is needed only from Clustersuite, but not for oVirt.
>>
>> > >
>>
>> > > But could you please execute this command on node-20 just to
>> > > confirm
>>
>> > > that Fujitsu Primergy is communicating through IPMI:
>>
>> > >
>>
>> > > fence_ipmilan -a IP -l USER -p PASS -o status -v -P
>>
>> > >
>>
>> > > where IP is IPMI address (from the log it should be 192.168.1.114)
>>
>> > > USER and PASS please set according to you setup.
>>
>> > >
>>
>> > > Thanks
>>
>> > >
>>
>> > > Martin
>>
>> > >
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > > [cid:image001.png at 01D03669.DD48B4E0]<mailto:[cid:image001.png at 01
>> > > > D03669.DD48B4E0]>
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > > Regards
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > > Renchu Mathew | Sr. IT Administrator
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > > CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T
>> > > > +971
>>
>> > > > 4
>>
>> > > > 3445417 | F +971 4 3493675<tel:%2B971%204%203493675> | M +971
>> > > > 50 7386484<tel:%2B971%2050%207386484>
>>
>> > > >
>>
>> > > > ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH
>>
>> > > >
>>
>> > > > EMAIL renchu at cracknell.com<mailto:renchu at cracknell.com> | WEB
>> > > > www.cracknell.com<http://www.cracknell.com>
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > > This email, its content and any files transmitted with it are
>>
>> > > > intended solely for the addressee(s) and may be legally
>> > > > privileged
>>
>> > > > and/or confidential. If you are not the intended recipient
>> > > > please
>>
>> > > > let us know by email reply and delete it from the system. Please
>>
>> > > > note that any views or opinions presented in this email do not
>>
>> > > > necessarily represent those of the company. Email transmissions
>>
>> > > > cannot be guaranteed to be secure or error-free as information
>>
>> > > > could be intercepted, corrupted, lost, destroyed, arrive late or
>>
>> > > > incomplete, or contain viruses. The company therefore does not
>>
>> > > > accept liability for any errors or omissions in the contents of
>>
>> > > > this message which arise as a result of email transmission.
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > > -----Original Message-----
>>
>> > > > From: Martin Perina
>> > > > [mailto:mperina at redhat.com<mailto:mperina at redhat.com>]
>>
>> > > > Sent: Thursday, January 22, 2015 4:49 PM
>>
>> > > > To: Renchu Mathew
>>
>> > > > Cc: users at ovirt.org<mailto:users at ovirt.org>
>>
>> > > > Subject: Re: [ovirt-users] Power Management config on Ovirt
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > > Hi,
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > > according to [1] Fujitsu iRMC should be accessible using IPMI.
>>
>> > > >
>>
>> > > > Now, I looked at logs, but I cannot see any fenceNode exection
>> > > > in
>>
>> > > > vdsm.log.
>>
>> > > > According to engine.log, host
>> > > > Node-02.cracknell.com<http://Node-02.cracknell.com> was used as
>>
>> > > > fence proxy.
>>
>> > > > Are you sure that vdsm.log is from this host?
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > > Thanks
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > > Martin
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > > [1]
>>
>> > > > https://www.redhat.com/archives/linux-cluster/2010-January/msg00056.
>>
>> > > > ht
>>
>> > > > ml
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > >
>>
>> > > > ----- Original Message -----
>>
>> > > >
>>
>> > > > > From: "Renchu Mathew"
>> > > > > <renchu at cracknell.com<mailto:renchu at cracknell.com>>
>>
>> > > >
>>
>> > > > > To: "Martin Perina"
>> > > > > <mperina at redhat.com<mailto:mperina at redhat.com>>
>>
>> > > >
>>
>> > > > > Cc: users at ovirt.org<mailto:users at ovirt.org>
>>
>> > > >
>>
>> > > > > Sent: Thursday, January 22, 2015 12:37:51 PM
>>
>> > > >
>>
>> > > > > Subject: RE: [ovirt-users] Power Management config on Ovirt
>>
>> > > >
>>
>> > > > >
>>
>> > > >
>>
>> > > > > Hi Martin,
>>
>> > > >
>>
>> > > > >
>>
>> > > >
>>
>> > > > > Please find attached log files from engine and proxy host. Not
>>
>> > > > > sure
>>
>> > > >
>>
>> > > > > whether IPMI or which one can be used. It is Fujitsu iRMC port.
>>
>> > > > > I also
>>
>> > > >
>>
>> > > > > tried the rsb but same error.
>>
>> > > >
>>
>> > > > >
>>
>> > > >
>>
>> > > > > Can we configure Power management using Fujitsu iRMC?
>>
>> > > >
>>
>> > > > >
>>
>> > > >
>>
>> > > > > Thanks & Regards
>>
>> > > >
>>
>> > > > >
>>
>> > > >
>>
>> > > > > Renchu Mathew
>>
>> > > >
>>
>> > > > >
>>
>> > > >
>>
>> > > > > -----Original Message-----
>>
>> > > >
>>
>> > > > > From: Martin Perina
>> > > > > [mailto:mperina at redhat.com<mailto:mperina at redhat.com>]
>>
>> > > >
>>
>> > > > > Sent: Thursday, January 22, 2015 1:58 PM
>>
>> > > >
>>
>> > > > > To: Renchu Mathew
>>
>> > > >
>>
>> > > > > Cc: users at ovirt.org<mailto:users at ovirt.org>
>>
>> > > >
>>
>> > > > > Subject: Re: [ovirt-users] Power Management config on Ovirt
>>
>> > > >
>>
>> > > > >
>>
>> > > >
>>
>> > > > > Hi,
>>
>> > > >
>>
>> > > > >
>>
>> > > >
>>
>> > > > > first of all are you sure that Fujitsu PRIMERGY is accessible
>>
>> > > > > using
>>
>> > > >
>>
>> > > > > IPMI protocol? If so, could you provide engine.log and also
>>
>> > > > > vdsm.log
>>
>> > > >
>>
>> > > > > from host that was used as fencing proxy? You can find out
>> > > > > which
>>
>> > > > > host
>>
>> > > >
>>
>> > > > > is used as a proxy either in Events tab after you execute the
>>
>> > > > > test or in engine.log.
>>
>> > > >
>>
>> > > > >
>>
>> > > >
>>
>> > > > > Thanks
>>
>> > > >
>>
>> > > > >
>>
>> > > >
>>
>> > > > > Martin Perina
>>
>> > > >
>>
>> > > > >
>>
>> > > >
>>
>> > > > > ----- Original Message -----
>>
>> > > >
>>
>> > > > > > From: "Renchu Mathew"
>> > > > > > <renchu at cracknell.com<mailto:renchu at cracknell.com>>
>>
>> > > >
>>
>> > > > > > To: users at ovirt.org<mailto:users at ovirt.org>
>>
>> > > >
>>
>> > > > > > Sent: Thursday, January 22, 2015 7:41:43 AM
>>
>> > > >
>>
>> > > > > > Subject: [ovirt-users] Power Management config on Ovirt
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > > Dear all,
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > > I am trying to configure power management on ovirt v3.5
>>
>> > > >
>>
>> > > > > > (ovirt-node-iso-3.5.0.ovirt35.20140912.el6) and using two
>>
>> > > > > > Fujitsu
>>
>> > > >
>>
>> > > > > > PRIMERGY
>>
>> > > >
>>
>> > > > > > RX2540 M1 as node hypervisor. I used Fujitsu iRMC port on
>>
>> > > > > > power
>>
>> > > >
>>
>> > > > > > management configuration. The test gives a message “Test
>>
>> > > > > > failed,
>>
>> > > >
>>
>> > > > > > argument of type ‘NoneType’ is not iterable” as below . Also
>>
>> > > > > > tried
>>
>> > > >
>>
>> > > > > > rsb type as per redhat document.
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > > Fence-agents-3.1.5-35.el6_5.4.x86_64 is there on both nodes.
>>
>> > > > > > Do we
>>
>> > > >
>>
>> > > > > > need to specify anything in Options?
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > > Please help me.
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > > Best Regards
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > > Renchu Mathew
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > > > _______________________________________________
>>
>> > > >
>>
>> > > > > > Users mailing list
>>
>> > > >
>>
>> > > > > > Users at ovirt.org<mailto:Users at ovirt.org<mailto:Users at ovirt.or
>> > > > > > g%3cmailto:Users at ovirt.org>>
>>
>> > > >
>>
>> > > > > > http://lists.ovirt.org/mailman/listinfo/users
>>
>> > > >
>>
>> > > > > >
>>
>> > > >
>>
>> > > > >
>>
>> > > >
>>
>> > >
>>
>> >
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org<mailto:Users at ovirt.org>
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
More information about the Users
mailing list