[ovirt-users] bonding 802.3ad mode

[Alex Crow]

The balancing on 802.3ad only occurs for different network flows based 
on a hash of source and destination MAC (or can be made to add IP 
addresses into the calculation). A single flow will only use a single 
NIC in ad mode.

Alex



On 18/03/15 16:17, Nathanaël Blanchet wrote:
> Hi all,
>
> I'm used to create a mode 4 bond0 interface with two 1 Gb/s interfaces 
> on all my hosts, and ethtool bond0 gives me a functionnal 2000Mb/s. 
> However, when importing a vm from the export domain (NFS with a speed 
> of 4GB/s), I always have this alert:
> "Host siple has network interface which exceeded the defined threshold 
> [95%] (em3: transmit rate[0%], receive rate [100%])"
> It seems that the second nic never works while the first one is 
> overloaded.
> Is it an expected behaviour? I believed that the flow was balanced 
> between the two interfaces in 802.3ad mode.
>
>
>
> -- 
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

-- 
This message is intended only for the addressee and may contain
confidential information. Unless you are that person, you may not
disclose its contents or use it in any way and are requested to delete
the message along with any attachments and notify us immediately.
"Transact" is operated by Integrated Financial Arrangements plc. 29
Clement's Lane, London EC4N 7AE. Tel: (020) 7608 4900 Fax: (020) 7608
5300. (Registered office: as above; Registered in England and Wales
under number: 3727592). Authorised and regulated by the Financial
Conduct Authority (entered on the Financial Services Register; no. 190856).

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150318/a6f310af/attachment.html>