[ovirt-users] bonding 802.3ad mode

[Lior Vernia]

Bonjour Nathanael,

You haven't mentioned which version of oVirt you were using - I suspect
it's pre-3.5 and therefore this isn't fixed yet:
https://bugzilla.redhat.com/show_bug.cgi?id=1114085

>From 3.5 onwards the warning should not appear for a bond (in
aggregating mode) if only one of its slaves is overloaded.

A bientot, Lior.

On 18/03/15 18:17, Nathanaël Blanchet wrote:
> Hi all,
> 
> I'm used to create a mode 4 bond0 interface with two 1 Gb/s interfaces
> on all my hosts, and ethtool bond0 gives me a functionnal 2000Mb/s.
> However, when importing a vm from the export domain (NFS with a speed of
> 4GB/s), I always have this alert:
> "Host siple has network interface which exceeded the defined threshold
> [95%] (em3: transmit rate[0%], receive rate [100%])"
> It seems that the second nic never works while the first one is overloaded.
> Is it an expected behaviour? I believed that the flow was balanced
> between the two interfaces in 802.3ad mode.
> 
> 
> 
> 
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>