[ovirt-users] oVirt management network

[Bojan Popovic]

I have enabled the VLAN tagging but no dice. Still I cannot attach
logical network to the VLANS in oVirt, and I see them represented in the
list, like this:

name    bond           vlan         Network name    address

eth0                    bond0.50        ovirtmgmt
            bond0   
eth1                    bond0.60
                                                  ovirtmgmt
-------------------------------------------------------------

Also since ip address is added to a ovirtmgmt bridge, I can not save any
additional configuration until I resolve this because it ovirt says that
there are two interfaces with the same IP address.


System-Email
		
Mit freundlichen Grüßen / Best Regards
Bojan Popovic
System Administrator | IT Novi Sad

	
	Tel: +49 (0) 711/ 320 90 285 	
	
	www.jago24.de <http://www.jago24.de>
www.jago-ag.de <http://www.jago-ag.de> 	
	E-Mail: bojan.popovic at jago-ag.de <mailto:bojan.popovic at jago-ag.de> 	

<http://www.jago24.de>

	
	JAGO AG
		Amtsgericht Stuttgart
	
	Ingersheimer Str.12
		Reg.Nr.: HRB 741306 	
	D-70499 Stuttgart
		USt-ID: DE283513307
	
	Vorstand:
		WEEE-Reg.-Nr. DE 70299572 	
	Goran Jakovac
		
	
	Aufsichtsratsvorsitzender: 		
	
	Dipl.-oec. Univ. Rolf Breyer 		
	

	
	
		
		Jago_AG_logo 	

	

		
 

On 30.03.2015. 13:14, René Koch wrote:
>
> Hi Bojan,
>
>  
>
> Did you configure a VLAN tag für your ovirtmgmt interface?
>
> You have to do this in „Data Centers“ – select dc – „Logical Networks“.
>
> Afterwards you should be able to configure network from oVirt webadmin
> interface again.
>
> Don’t have a test setup with VLAN tags for ovirtmgmt atm, but did this
> multiple times before…
>
>  
>
>
> Regards,
>
> René
>
>  
>
>  
>
> *Von:*users-bounces at ovirt.org [mailto:users-bounces at ovirt.org] *Im
> Auftrag von *Bojan Popovic
> *Gesendet:* Montag, 30. März 2015 12:15
> *An:* users at ovirt.org
> *Betreff:* [ovirt-users] oVirt management network
>
>  
>
> Hello, I am having a strange issue in creating ovirtmgmt bridge over
> vlan interface.
>
> I have set-up a bond from physical interfaces. On top of a bond there
> are three VLANs one of which is in ovirtmgmt bridge. I have set it up
> manually according to http://www.ovirt.org/Bonding_VLAN_Bridge
>
> Somehow the bond itself is also added to bridge in oVirt web
> interface, after reboot there also were two added lines to
> configuration of that bond:
> # Generated by VDSM version 4.16.10-8.gitc937927.el7
> BRIDGE=ovirtmgmt
>
> No matter how I try to remove the bond from the bridge it doesn't
> succeed. If I edit the config files manually it isn't replicated to
> web interface. If I try to detach it from web interface, I can only
> attach bridge back to the bond interface. Of course configuration
> cannot be saved until the bridge is attached to an interface.
>
> I have tried putting the host in maintenance mode, shutting down the
> hosted engine and doing all the changes live.
>
> Anyone has a suggestion how to resolve this?
>
> Thanks.
>
>
> 	
> 	
>
>  
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150331/e0003d57/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: blank.gif
Type: image/gif
Size: 43 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150331/e0003d57/attachment-0001.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: logo_blatt.png
Type: image/png
Size: 27059 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150331/e0003d57/attachment-0001.png>