[ovirt-users] Hosted-engine-Issue
Budur Nagaraju
nbudoor at gmail.com
Thu Apr 21 23:09:54 EDT 2016
HI
Any updates issue is blocking ?
Thanks,
Nagaraju
On Thu, Apr 21, 2016 at 7:20 PM, Budur Nagaraju <nbudoor at gmail.com> wrote:
> Below are the details, unable to ping the gateway from the ovirt engine
> ,able to ping the ovirt engine from host as both are there in the same
> network.
>
>
> [root at oe ~]# ip addr
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
> inet6 ::1/128 scope host
> valid_lft forever preferred_lft forever
> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> UP qlen 1000
> link/ether 00:16:3e:33:38:e5 brd ff:ff:ff:ff:ff:ff
> inet 10.206.66.9/23 brd 10.206.67.255 scope global eth0
> inet6 fe80::216:3eff:fe33:38e5/64 scope link
> valid_lft forever preferred_lft forever
> [root at oe ~]#
> [root at oe ~]#
> [root at oe ~]#
> [root at oe ~]# ip route
> 10.206.66.0/23 dev eth0 proto kernel scope link src 10.206.66.9
> 169.254.0.0/16 dev eth0 scope link metric 1002
> default via 10.206.67.254 dev eth0
> [root at oe ~]#
> [root at oe ~]#
> [root at oe ~]#
> [root at oe ~]# brctl show
> bridge name bridge id STP enabled interfaces
> [root at oe ~]#
>
>
>
>
>
>
> On Thu, Apr 21, 2016 at 4:51 PM, Yedidyah Bar David <didi at redhat.com>
> wrote:
>
>> On Thu, Apr 21, 2016 at 1:39 PM, Budur Nagaraju <nbudoor at gmail.com>
>> wrote:
>> > HI
>> >
>> > Installed hosted engine and after configuring IP to ovirt engine
>> unable to
>> > ping the gateway and found that there is no issue with the Network .
>>
>> You mean that from inside the engine machine, you cannot ping the gateway?
>>
>> Can you ping it from the host?
>>
>> Please share output of these commands, from both the host and the engine
>> vm:
>>
>> ip addr
>> ip route
>> brctl show
>>
>> Thanks,
>>
>> >
>> > Is there any thing am missing while installing Hosted engine ? below is
>> > output details,
>> >
>> >
>> > --== CONFIGURATION PREVIEW ==--
>> >
>> > Engine FQDN : oe.bnglab.psecure.net
>> > Bridge name : ovirtmgmt
>> > SSH daemon port : 22
>> > Gateway address : 10.206.67.254
>> > Host name for web application : hosted_engine_1
>> > Host ID : 1
>> > Image alias : hosted_engine
>> > Image size GB : 25
>> > Storage connection : 10.204.207.152:
>> /home/heoe
>> > Console type : vnc
>> > Memory size MB : 4096
>> > MAC address : 00:16:3e:2f:5c:40
>> > Boot type : cdrom
>> > Number of CPUs : 2
>> > ISO image (for cdrom boot) :
>> > /ovirt/CentOS-6.7-x86_64-minimal.iso
>> > CPU Type : model_SandyBridge
>> >
>> > Please confirm installation settings (Yes, No)[Yes]: yes
>> > [ INFO ] Stage: Transaction setup
>> > [ INFO ] Stage: Misc configuration
>> > [ INFO ] Stage: Package installation
>> > [ INFO ] Stage: Misc configuration
>> > [ INFO ] Configuring libvirt
>> > [ INFO ] Configuring VDSM
>> > [ INFO ] Starting vdsmd
>> > [ INFO ] Waiting for VDSM hardware info
>> > [ INFO ] Waiting for VDSM hardware info
>> > [ INFO ] Creating Storage Domain
>> > [ INFO ] Creating Storage Pool
>> > [ INFO ] Connecting Storage Pool
>> > [ INFO ] Verifying sanlock lockspace initialization
>> > [ INFO ] Creating VM Image
>> > [ INFO ] Disconnecting Storage Pool
>> > [ INFO ] Start monitoring domain
>> > [ INFO ] Configuring VM
>> > [ INFO ] Updating hosted-engine configuration
>> > [ INFO ] Stage: Transaction commit
>> > [ INFO ] Stage: Closing up
>> > The following network ports should be opened:
>> > tcp:5900
>> > tcp:5901
>> > udp:5900
>> > udp:5901
>> > An example of the required configuration for iptables can be
>> found
>> > at:
>> > /etc/ovirt-hosted-engine/iptables.example
>> > In order to configure firewalld, copy the files from
>> > /etc/ovirt-hosted-engine/firewalld to /etc/firewalld/services
>> > and execute the following commands:
>> > firewall-cmd -service hosted-console
>> > [ INFO ] Creating VM
>> > You can now connect to the VM with the following command:
>> > /usr/bin/remote-viewer vnc://localhost:5900
>> > Use temporary password "2049ZfXr" to connect to vnc console.
>> > Please note that in order to use remote-viewer you need to be
>> able
>> > to run graphical applications.
>> > This means that if you are using ssh you have to supply the -Y
>> > flag (enables trusted X11 forwarding).
>> > Otherwise you can run the command from a terminal in your
>> > preferred desktop environment.
>> > If you cannot run graphical applications you can connect to
>> the
>> > graphic console from another host or connect to the console using the
>> > following command:
>> > virsh -c qemu+tls://Test/system console HostedEngine
>> > If you need to reboot the VM you will need to start it
>> manually
>> > using the command:
>> > hosted-engine --vm-start
>> > You can then set a temporary password using the command:
>> > hosted-engine --add-console-password
>> > The VM has been started. Install the OS and shut down or
>> reboot
>> > it. To continue please make a selection:
>> >
>> > (1) Continue setup - VM installation is complete
>> > (2) Reboot the VM and restart installation
>> > (3) Abort setup
>> > (4) Destroy VM and abort setup
>> >
>> > _______________________________________________
>> > Users mailing list
>> > Users at ovirt.org
>> > http://lists.ovirt.org/mailman/listinfo/users
>> >
>>
>>
>>
>> --
>> Didi
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160422/43cd56ed/attachment.html>
More information about the Users
mailing list