[ovirt-users] Importing VM from Xen Server 6.5
Tomáš Golembiovský
tgolembi at redhat.com
Thu Aug 11 10:41:47 UTC 2016
Hi,
On Thu, 11 Aug 2016 14:14:24 +0530
Anantha Raghava <raghav at exzatechconsulting.com> wrote:
> Hi,
>
> Tested this with different combinations:
>
> a. from VDSM host, both "ssh root at 192.168.1.40" and "sudo -u vdsm ssh
> root at 192.168.1.40" commands are logging in without asking for password
> and I can run all xe commands without any glitch without modifications
> to default xen server firewall or SELinux rules.
Could you please verify that running 'virsh list --all' localy works too?
>
> b. With firewall enabled and SELinux set to enforcing or permissive or
> disabled, I run "virsh -c ssh://root@192.168.1.40". And the command is
> resulting in two errors:
>
> error: filed to connect to the hypervisor
> error: unable to connect to the server at '192.168.1.40:16514' : No
> route to the host.
>
> c. With firewall disabled and SELinux set to Enforcing or permissive or
> disabled, I run "virsh -c ssh://192.168.1.40". And the command is
> resulting in two errors
>
> error: filed to connect to the hypervisor
> error: unable to connect to the server at '192.168.1.40:16514' :
> Connection refused
>
That is because your libvirt URI is wrong. It has to be 'xen+ssh://...'
not 'ssh://...'.
Does it work if you try: virsh -c 'xen+ssh://root@192.168.1.40'
Best regards,
Tomas
More information about the Users
mailing list