[ovirt-users] Self-Hosted Engine Deployment - Certificate Cannot be Found

[Trenton D Warren]

Aloha,

 

I am looking for assistance with an Ovirt Self-Hosted Engine Deployment on
Centos 7.2.

 

I have the host configured, and have accessed the VM (Engine).  I run engine
setup on the VM in accordance with the
http://www.ovirt.org/Hosted_Engine_Howto page on the Wiki, with the
exception of Automatically executing "Engine Setup" on the VM.  Because of
my configuration, I have to manually enter the network settings on the VM
before it has network access, and then execute engine setup automatically.
Particularly notable is that I enter the selection to automatically
configure Apache to use a self-signed SSL during the Engine-Setup.

 

The Engine-Setup completes successfully on the VM, I reboot, and verify that
the web page is accessible and that I can log in to the engine.  Then I
return to the host to enter option 1 (Continue Setup - Ovirt Engine
Installation is Ready and Engine service is up) and continue with the
installation.  

 

The Engine Replies: DB Up! And acquires the internal CA cert from the
engine.  It lists the cert and then attempts to connect to the engine.  The
installation asks me to enter the name of the Cluster to which I want to add
the host and I enter the automatic "Default" option.   

 

At this point the installation returns an error: Cannot automatically add
the host to cluster Default: Cannot add Host.  Connecting to host via SSH
has failed, verify that the host is reachable (IP address, routable address,
etc.) You may refer to the engine.log file for further details.

 

Some notes: 

1.        The /etc/hosts/ file is configured on both host and engine, with
ip and fqdn

2.       Password-Less SSH is enable between both host and engine,
bidirectionally.

3.       Ping responds to both servers.  DNS resolves on both servers.

4.       SSH-Keygen was use to generate key, and key was stored in default
Centos location /root/.ssh/id_rsa

5.       Ssh-copy-id was used to copy the key to engine from host and vice
versa.  No password on key.

 

I have managed to get this error to change by copying the contents of the
/root/.ssh/id_rsa key to the /etc/pki/ovirt-engine/keys/engine.p12 location.


 

When I attempt to "Continue setup - Engine VM configuration has been fixed"
from this point, the error message changes slightly to: "Cannot
automatically add the host to cluster Default: Cannot add new host using a
secured connection, Certificate file could not be found.

 

Some Notes:

1.       I have ran the "Certificate and/or SSL problems?" procedures on
www.ovirt.org/Node_Troubleshooting
<http://www.ovirt.org/Node_Troubleshooting> "  to verify the vdsm cert on
the host.  It returns a normal response.  

 

Can someone provide some assistance with this issue?  I have attempted every
work around that I know, and researched every source at my disposal to no
avail.  This issue has been plaguing me for the last three weeks.  I have
restarted the installation multiple times from fresh installs of the engine,
the host, and both, and still no change up to this point.

 

Thank you!

 

Trenton D Warren

President and CEO, Phoenix Holdings Corporation

Main Office: 41-745 Mooiki ST. Waimanalo, HI 96795

Office:    (808) 263-7448

Direct:    (808) 263-7449

Cell:        (478) 867-3107

Web:      www.phoenixhawaii.net

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160218/c1cda3e5/attachment-0001.html>